Export WEB Template in Excel in WEB Interface Builder

Hi Experts,
is it possible to add a web template with the pushbutton "Export in Excel" in a web planning layout?
So i have to do a web interface with a planning layout under which i have to insert a web template and a pushbutton with "Export in Excel" functionality.
Many thanks,
Fabio.

Hi Fabio
This is possible in Web Application Designer. In the WAD you have an option of selecting the "Export" command that allows you to select the file format you'd like to export to: Excel, csv, txt or PDF.
So you could consider pulling your layouts/queries into WAD and use this option.
Srikant

Similar Messages

Problem when exporting Query from Web template to Excel Sheet.

Hello,
Im encoutering a problem when im trying to export query output from web template to excel sheet.
A popup windown appears when excel sheet opens which reads.."problem cameup in the following areas during load : Cell Value".The report layout appears to be fine but the totals shows unwanted values starting with * followed by number.
Any valuable inputs, what could be the problem. where can i rectify the same.
Regards
Ellora

Hello A K,
Thanks for ur time and response but the option u mentioned did not serve my purpose.
The problem seems to be only with pirticular cells.As mentioned earlier the layout appears properly..all the values are seen..but the end result..totals are disturbed.
eg: If the report shows in template the total value :20,668,554...when exported the values is shown as **668553.88000000600000.
So what could be the problem ? any template setting ? global setting to look at ?
Regards
Ellora

Problem while exporting the text written on web-template to excel.

Hi Experts,
I created a report at WAD ,while exporting it to excel all the web items got exported except for the text written on the web-template.
Is it possible to export the text written on web-template to excel???
Also i dont want to add the text-item.
Edited by: shyam@apa on Mar 6, 2009 8:42 AM
Edited by: shyam@apa on Mar 6, 2009 8:43 AM

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Downloading Web Template to Excel

Hello experts,
I am using a custom made web template with few of the web items. Now, the issue is that I'm not able to down load the report to Excel. I have tried right mousing the report and then exporting to excel. It doesn't work. Apart from this, is there any option like putting any web item which conatins the button " Export to Excel" avaialable ?.
Thanks ..
Sheeja.

If you're using NW20904s, then here's the XHTML that you need
                                <a >
                                    <bi:attribute name="href" >
                                        <bi:EXPORT >
                                            <bi:EXPORT_FORMAT value="XLS2000" />
                                            <bi:ITEM_REF_LIST type="UNORDEREDLIST" >
                                                <bi:ITEM_REF index="1" value="QUERY_TITLE" />
                                                <bi:ITEM_REF index="2" value="ACTUAL_DATE_TEXT" />
                                                <bi:ITEM_REF index="3" value="ACTUAL_DATE" />
                                                <bi:ITEM_REF index="4" value="INFO_FIELD_ITEM_1" />
                                                <bi:ITEM_REF index="5" value="ANALYSIS" />
                                                <bi:ITEM_REF index="6" value="CHART" />
                                            </bi:ITEM_REF_LIST>
                                        </bi:EXPORT>
                                    </bi:attribute>
                                    <img alt="Download to Excel" src="bwmimerep:///sap/bw/mime/Customer/Images/Icons/ExcelIcon.jpg" border="0" />
                                </a>
If you're not on 2004s, then use:
                            <A href="<SAP_BW_URL CMD='EXPORT' FORMAT='XLS' DATA_PROVIDER='DATAPROVIDER_1' >">
                               <IMG title="Export to Excel" src="Mime/BEx/Icons/S_X_XLS.gif" border=0>
                            </A>

Web Template to call another Web Template (Dashboard to Dashboard)...

Hi All,
I have a dashboard where I want to drilldown to a more detailed level of data.
I have setup the RRI and when executing in the initial dashboard it uses the default web template...fine. But how to get it to call another template/dashboard?
Is there a way to have multiple tables in one dashboard and the "2nd" table only gets filled when the RRI is executed?
Thanks so much.

Hello Bhanu,
Well, that was a stupid question...I set it up for query and not web template. Sorry about that...just never did before for the web.
Full points, that worked perfect.
Thanks, M-

Error in Exporting HRMS people data to excel using WEB EDI.

Hi ,
I am using an existing integrator to export people data to excel using WEB ADI.
When the excel opens it first shows the it is trying to download data, but later shows an error message saying that an error has occurred in the script on this page
line 18
Char 5
Error Object doesn't support this property or method.
Can anyone please throw some light as to what can be the cause of the error.
Regards
Deepak

Hi experts,
When I click the "Upload" button on GL Journal WebADI, The following error message is displayed:
http://myservername:port/OA_HTML/BneApplicationService?bne:encoding=UTF-8
I think this error is similar as your previous discussion, and I tried the solution as you mentioned, but not worked. If there is any new solution for the errors of this kind?
Some Environment parameters are as following:
Product: EBS 12.1.1
Browser: IE 7.0 and Firefox 3.5.5
Hope for your advice.
Thanks in advance.

Header and footer in Web Template output

Hi,
I have created a web template consisting of several web items like - information field, text fields, chart & analysis. With the help of VC we are exporting this web page into PDF. What my customer want is that to show some particular informatio in the footer like page number's company name and all.
Is there any option that i can do all these things from my end that is from BW end not from VC..
Any help will be appreciated.
Thanks & Regards

hi..
chk this presentation...
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt#352,3,Why NW 2004s?
http://www.sap-hefte.de/download/dateien/1090/086_leseprobe.pdf'
hope this helps...

WEB Template TCode

Hi,
We are using both 3X & 7X Web Templates in our BI System.
TCode where i can find the DEFAULT WEB TEMPLETE(3X & 7X) that is being used in system
Thanks

Hi suser1234, To assign/check the default template: Transaction SPRO > SAP NetWeaver > Business Intelligence > BEx Web > Set Standard Web Template. The following objects refer to the default templates pattern (most commonly used ones). Go to RSA1 > Meta Data Repository. The following objects would be available in either Activated Objects or Business Content. If you need to edit them & customize according to your requirements; like say you need to work on 0ANALYSIS_PATTERN web template, edit it using Web Application Designer. You may check out this [link |/thread/1151337 [original link is broken];also for your reference.
Object type Valuation Description (short) Description (long) Technical name
0 Analysis Analysis 0ANALYSIS_PATTERN
0 Analysis Pattern Exp Analysis Pattern Export 0ANALYSIS_PATTERN_EXPORT
0 Special Analysis Pat Special Analysis Pattern Export 0ANALYSIS_PATTERN_EXPORT_SPEC
0 Analysis Pattern - F Analysis Pattern - Filter Information 0ANALYSIS_PATTERN_FILTER
0 Special Analysis Pat Special Analysis Pattern - Filter Information 0ANALYSIS_PATTERN_FILTER_SPEC
0 Footer Web Template Footer Web Template for SAP Standard Templates 0ANALYSIS_PATTERN_FOOTER
0 Header Web Template Header Web Template for SAP Standard Templates 0ANALYSIS_PATTERN_HEADER
0 Analysis Pattern for Analysis Pattern for ICP 0ANALYSIS_PATTERN_ICP
0 Special Analysis Pat Special Analysis Pattern for ICP 0ANALYSIS_PATTERN_ICP_SPECIAL
0 Analysis Pattern: In Analysis Pattern: Information 0ANALYSIS_PATTERN_INFO
0 Special Analysis Pat Special Analysis Pattern: Information 0ANALYSIS_PATTERN_INFO_SPECIAL
0 Analysis Pattern - S Analysis Pattern - Special Variant 0ANALYSIS_PATTERN_SPECIAL
Note: Just a word of caution, editing standard templates will affect look/patterns of all queries/reports in your system. Thanks!
Edited by: Arun Bala G on Oct 25, 2010 11:39 AM

BI Web Template Caching on EP server

Hello,
We are developing BI web templates in the BI Web Application Designer and then previewing (via publishing) them with the EP web server. When we make a change to the report/template and republish/preview it to the EP server, the old version remains in the EP web server cache.
Also to note, this is PRIOR to creating BI iviews and incorporating them in EP, so our assumption is that the cache settings in EP iviews do not apply in this case, but that it a broader issue with the EP web server or application itself.
So far, we have tried clearing the overall PCD EP cache under sys admin support section and that does not work. The only way to get the latest content to show up via preview/republish is to restart the EP instance which clears the cache.
Is there any other place cache can be cleared or a setting that will allow the BI previewer and ALL content (i.e. iviews as well) to ALWAYS get the latest and greatest version??
Thanks in advance for any help.
Dave K.

hi Dave,
cpl of questions are you on a federated network or are you using any proxy to access the portal? usually it will be slightly delayed some times based on the proxy cache. how are you adding the reports to role through delta link or copy?
When using the portal cache, data updates can appear with a delay.
pls go through the following link it may help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/25/8c174082fe1961e10000000a155106/content.htm
Jo

How to get New Window without Variable Entry screen from one Web Template?

Hi Experts,
I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
I need to avoid this "Rerun" feature in New Window.
Kindly suggest me how to achieve this..
Full points will be given.
Thanks
Jay Jay

Hi Thanks.
Even I'm also trying for the same scenario only.
Actually I have 2 Web Templates.
In First Template I have 2 Charts and 2 Zoom buttons for each.
While I running the 1 Template, i give an Value in the Variable screen of First Web Template.
If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
(Since, U have an Mandatory field in Second Template u were not faced this requirment.)
Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
Kindly help me in this issue.
Thanks in advance.

How to achieve New Window requirement from One Web Template?

Hi Experts,
I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
I need to avoid this "Rerun" feature in New Window.
Kindly suggest me how to achieve this..
Full points will be given.
Thanks
Jay Jay

Hi Thanks.
Even I'm also trying for the same scenario only.
Actually I have 2 Web Templates.
In First Template I have 2 Charts and 2 Zoom buttons for each.
While I running the 1 Template, i give an Value in the Variable screen of First Web Template.
If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
(Since, U have an Mandatory field in Second Template u were not faced this requirment.)
Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
Kindly help me in this issue.
Thanks in advance.

How to disply the value of variable in the Web template

Imagine I have a query TOP-N customers. I want to diplay N value in the web template. I used web item for this purpose in NW2004. Which item should I use for the same purpose in NW2004s?
Thanks

Does anyone have another suggestion? The information field does not render pretty. I am trying to do this via an HTML path edit and a text box. The view source looks like this for a variable
<BICS_VIEW>
<VARIABLES>
<VARIABLE name="RDSHW_PCY_YOVERY" type="DOUBLE" text="% Goal Year over Year" value="10.0"/>
</VARIABLES>
I tried various versions of the path=... but cannot get it to work. Anyone got an idea ???
I tried
path="DATA_PROVIDER:DP_1?/BICS_VIEW/VARIABLES/VARIABLE/@value" />

Query designer report and Web Templates

Dear All,
I have a very basic/stup doubt.
Are reports made through Bex Query Designer and Web Templates the same?
Actually there is a following requirement:-
"Navigate from a BW Web template to a PCUI application". I have a document related to it but it gives me step on how can i modify my web templates to achieve this functionality. But all my reports are made through query designer and it available to user through Web Dynpro portal.
So i just wanted to know is Web Template and Reports made through query designer the same? So that i can implement the changes in my report.
Thanks.

Hi Anup,
by using web templates we can use N number of data providers (Queries) for a single analysis view with various available options. - N number of Queries can be assigned to Web template to create a web report
but by using the Query designer ,you can create a single report which may not provide sufficient information to the client and the number of features are less compared to web template.
as you mentioned that you are using the web dynpro.
i think the web dynpro requires the web reports as an iview and ths iview can be created by using the Query designer and or web app designer.
so the most clear view can be given to client using the WAD reports

Security for creating web templates using web application designer

I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexaco

Thanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security

Error when loading Web Template from Web Dynpro

Hi Experts,
I work on a BI ABAP server. I'm trying to integrate a BIApplicationFrame in my ABAP Web Dynpro application.
First, I created a Web Template (named ZTPL_Z0AFSD_C01_Q0001) with Web Application Designer and I can run it from there. It works fine. The address looks like :
http://pwdf2927.wdf.sap.corp:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?TEMPLATE=ZTPL_Z0AFSD_C01_Q0001&DUMMY=2
In my BIApplicationFrame in Web Dynpro, I give the server name (and port), the server type (ABAP) and the templateId (ZTPL_Z0AFSD_C01_Q0001). My application work and the BIFrame try to open the following address:
http://usciq75.wdf.sap.corp:50010/SAP/BW/BEX?CMD=LDOC&TEMPLATE_ID=ZTPL_Z0AFSD_C01_Q0001 ...
I receive the error:
Error loading template ZTPL_Z0AFSD_C01_Q0001
Notification Number BRAIN 276
So, it looks like that the server is found but my Web Template is unknown for Web Dynpro. Did I forgot a step after the creation of the Web Template that would 'activate' it and make it visible? Why the two Web Address looks so different?
Thanks for your answer
Davy

Hi
Check
Re: JCO$Exception: RFC_ERROR_SYSTEM_FAILURE in WAD Template
Also make sure that you have installed 0ANALYSIS objects from Business Content->Object types -> BEx Web Template and choose all 0ANALYSIS objects and install the same.
Hope this helps
Raja

Export WEB Template in Excel in WEB Interface Builder

Similar Messages

Maybe you are looking for