Exportto excel in tcode MCAF results in program termination for only 1 user
Hi,
The user is trying to export data from MCAF into a local file. This action results in program termination, its only for his user id. It works for all the user ids the basis guys had a look at it and they said everthing is ok on the authorization side. Im confused, please let me know...
Thanks,
Sukumar.
Thanks for the quick reply!!!
Error analysis
The system tried to access field "OE_OBJEKTTEXT" with type "C" and length
60 in the current program "RMCY9110 " using offset 71.
Partial field access is not allowed with an offset specification that is
larger than actual field length.
How to correct the error
Make the offset smaller with which you want to access the field.
If the error occurred in an ABAP program of your own or an SAP program
that you modified, try to correct it.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DATA_OFFSET_TOO_LARGE"
"RMCY9110 " bzw. "RMCS0F0O "
"OBJEKTTEXT_ERMITTELN"
Thanks,
Sukumar.
Similar Messages
-
Program installed for only one user
Have a program that is installed for only one user, how can I get another user access to the software? don't have install disk.
ThanksSelect the application's icon then Press COMMAND-I to open the Get Info window. In the Ownership and Sharing section check the owner and group assignments. If they have owner=you and group=you or staff, then you must change those. Open the Terminal application in the Utilities folder and enter the following command line at the prompt:
sudo chown -R root:admin
Put a space after "admin' then drag the application's icon into the Terminal window and press RETURN. You will be prompted for your admin password which will not be echoed.
This should enable other users to access the application provided you have given the user access via their managed account preferences in Accounts preferences. -
Memory Error When Compiling Resulting in Program Termination
When I compile my file, it prints the following message
"There is not enough memory for this task. Quit one or more
programs to increase available memory and then try again."
I can rule out memory and incorrectly named files:
* I have 1 GB memory with no other programs open after a
clean reboot when I get this message. My virtual memory is adequate
as well. I also have 20 GB free drive space on C drive and 15 GB
free on the network drive.
* I have no spaces in the file names; all spaces are replaced
with underscores.
Any idea of what can cause this or how to fix this?Looks like the classes that you are using were compiled with a different JDK version.
Try using JDeveloper 10.1.3 - which has built in JDK 5. -
Search result Page throw Error for anonymous User
We have claim base WebApplication in SharePoint 2013. Every thing is working fine and user can login site without any problem. Only search result page not working..its given "Sorry, something went wrong "
From ULS Log I found below exception
CoreResultsWebPart::OnInit: Exception initializing: System.InvalidOperationException: The security token request cannot be completed.
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForServiceContext(Uri contextUri)
at Microsoft.SharePoint.SPChannelFactoryOperations.InternalCreateChannelActingAsLoggedOnUser[TChannel](ChannelFactory`1 factory, EndpointAddress address, Uri via)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.GetChannel(Uri address, Int32 timeoutInMilliseconds)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.DoSpLoadBalancedUriWsOp[T](WebServiceBackedOperation`1 webServiceCall, Int32 timeoutInMilliseconds, Int32 wcfTimeoutInMilliseconds, String operationName)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.DoWebServiceBackedOperation[T](String operationName, Int32 timeoutInMilliseconds, Int32 wcfTimeoutInMilliseconds, WebServiceBackedOperation`1 webServiceCall)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.DoWebServiceBackedOperation[T](String operationName, WebServiceBackedOperation`1 webServiceCall)
at Microsoft.Office.Server.Search.Query.ConsumerScopeCache.Refresh(IEnumerable`1 sharedScopes)
at Microsoft.Office.Server.Search.Query.ConsumerScopeCache.EnsureFresh()
at Microsoft.Office.Server.Search.Query.ConsumerScopeCache.TryGetScope(Int32 id, ScopeInformation& scope)
at Microsoft.Office.Server.Search.Query.ScopeCache.TryGetScope(Guid siteGuid, Int32 id, ScopeInformation& scope)
at Microsoft.Office.Server.Search.WebControls.SearchCommon.GetScopeNameByScopeID(Guid siteGuid, Int32 scopeID)
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
We are using Arabic Language Pack SharePoint 2013 on Windows server 2012 with SQL Server 2012.
anonymous access already given form Central Admin and Sitecollection level
Quick response will be highly Appreciated.Its need to be set impersonate="true"
<authentication mode="Forms">
</authentication>
<identity impersonate="true"
/>
to resolve custom solution which need impersonate="false"
Run command in evaluated privilege... -
How to get list of TCODE allowed to be executed for a user
abap program..to get the list of TCODES allowed by the basis person for a user/me.....code plz....
hi,
check in the tables :
AGR_SELECT
AGR_TCDTXT
AGR_TCODE3
AGR_TCODES
here you will get role name and then the tcode attached to it,
AGR_USERS
AGR_USERT
these are the tables where user is attached to role.
first check whether a role contains particular t.code and then check whether user has access to that role or not. -
Inputting an excel file to the java servlet program
Hi,
How can I input an excel file into the java servlet program? I am using POI HSSF programming to read the content of that excel file.I have created a form that will accept the path from the user and in the servlet program, I have called a post method to retrieve the path of the file. I am getting the path of the file as a string.Then I have to access the file to read the data. But it is not working. What should I do?.Please help me.
I have created an html file to create a form that will ask the path of the file to be loaded into the servlet program.Please give me a solution,thanks in advance. The servlet program that receives the file is shown below. It just only take the name of the file and prints if that is ok.
<html>
<body bgcolor="green">
<center>
<form method="post" action="http://localhost:8080/examples/servlet/Ron1">
<table>
<tr>
<td><B>ENTER THE PATH OF THE FILE</td>
<td><input type=file name="path"></td>
</tr>
</table>
<input type=submit value= "submit" >
</form>
</body>
</html>
import java.io.*;
import javax.servlet.*;
import java.lang.*;
import javax.servlet.http.*;
import java.sql.*;
import java.text.*;
import java.util.*;
import com.oreilly.servlet.MultipartRequest;
import org.apache.poi.hssf.usermodel.*;
public class Ron1 extends HttpServlet
public void doPost(HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
String u = request.getParameter("FileToUpload");
out.println("The Path is "+u);
System.out.println("The path is "+u);
MultipartRequest multi = new MultipartRequest(request,u,10 * 1024 * 1024);
System.out.println("path is "+u);
Enumeration files = multi.getFileNames();
File fUploadedFile = null;
String sFileName = "";
out.println("path is "+u);
while(files.hasMoreElements())
String name = (String)files.nextElement();
out.println("file is "+name);
sFileName = multi.getFilesystemName(name);
String type = multi.getContentType(name);
fUploadedFile = multi.getFile(name);
FileInputStream fis= new FileInputStream(fUploadedFile);
HSSFWorkbook wb=new HSSFWorkbook(fis);
System.out.println("The path is "+u);
out.println("File has identified successfully\n");
out.close();
}Hi,
Can you try to use classes from java.net package (URL, URLConnection) to pass the contents of excel file to servlet?
HTH
Vishal -
Please Vote if you find this to be helpful!
App-V PowerShell: Script to Query XenApp Servers for App-V Publishing Errors and Output an Excel Document with the Results
Just posted this to the wiki:
http://social.technet.microsoft.com/wiki/contents/articles/25323.app-v-powershell-script-to-query-xenapp-servers-for-app-v-publishing-errors-and-output-an-excel-document-with-the-results.aspxHi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps. -
Excel allows array arithmetic (e.g. sum{(a1:a5* b1:b5)} where the contents of the cells are the results of formulae. Numbers only allows constants in the array cells. Right? Any work-arounds?
CJPerry wrote:
Any work-arounds?
There is a very simple one : use libreOffice.
Yvan KOENIG (VALLAURIS, France) dimanche 1 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios -
"Program terminated in remote system NONE: Logon failed" when adding a new table
Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
ChristianFirst thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
One monitoring job (master job)
One master controller job
At least one data load job
One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
The Number of required data transfer jobs ,
plus one background work process for Central Master (Monitoring) Job (only one per system!),
plus one background work process for Master Controller Job,
plus 3-5 additional empty background work processes (recommended per configuration),
plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian -
Print program name for the dunning form F150_FR_DUNN_01 in sapscript
Hi,
I am not getting the exact print program name for the dunning form F150_FR_DUNN_01 in sapscript. After an extensive search I have come across few names of print program like SAPF150D2 and SAPLF150. But still I am not understanding which one to use for the form and also how to use it. I am unable to understand which include I should use to write my code.
Kindly help me.
Thanking you.
Pujarini PatraHi,
Yes, you should be able to assign F150_FR_DUNN_01 in Dunning Forms customizing:
and yes, I too would absolutely try to go for either a Smartform or even a PDF Form (if i'd have all the necessary setup for them, like Adobe Document Services, in the system already). I have Basis 702 SP 0011and FINBASIS 600 SP 0021, so all the following technicalities refer to those releases:
The corresponding SAP sample Forms are:
- F150_DUNN_SF for Smartform; and
- F150_DUNN_SF for pdf Form (don't let the name confuse you )
I'm not entirely sure if it's a good idea to try to convert/migrate Sapscript to Smartform and the Smartform to PDF Form - have never done that myself and don't know how good/usable the migration result is. I just take the interface of Smartform from SAP and do the rest from scratch or by copying over the common parts of our existing custom forms.
There are the SAP Standard wrapper FMs for SF and PDF forms already in the System:
- FI_PRINT_DUNNING_NOTICE_SMARTF calling PRINT_DUNNING_NOTICE_SF and
- FI_PRINT_DUNNING_NOTICE_PDF calling PRINT_DUNNING_NOTICE_PDF.
So, theoretically, all you had to do to replace SapScripts (or even to enable all three form types) is to assign a custom BTE Event handler FM to event 1720 (for correct Application), which could detect, what type of form is assigned in Customizing and call the corresponding wrapper FM.
As a sample for coding PDF form wrapper call one could take FI_PSO_EVENT_00001720_PDF (if you have IS-PS) in the system. I'd take out the IS-PS specific "business logic" like posting dunning charges (if it does not apply to my solution) and add the logic to decide, which wrapper to call.
The confusing part about the customizing (Table T047E) to me is that there seems to be no form type defined anywhere in there... just the FORNR field for form name, which should apparently take the names of all three form types... I'd try to extend that table with custom Form type field and try to regenerate Table Maintenance dialog for view Cluster VC_T047_F... That would save the whole effort to try to detect the type for form assigned...
Another tip, in case you didn't know it already: you should be able to see all the Customizing paths, where T047E is involved, when you enter table name in SM30 and press "Customizing" and then "Continue w/o Specifying Project":
The selected entry is the one you are looking for to assing your custom forms, I believe.
cheers
Janis -
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
'Abnormal program termination.An internal error has occured.'
Hi all... i have a problem when i'm in the middle of infra installation (74%) and then this popup message appears and stop my installation 'Abnormal program termination. An internal error has occured. Pls provide the following files to Oracle support:
"/oraias/oraInventory/logs/installActions2010-08-18_11-03-52AM.log"
"/oraias/oraInventory/logs/installActions2010-08-18_11-03-52AM.err"
"/oraias/oraInventory/logs/installActions2010-08-18_11-03-52AM.out"
i have tried several ways and many times to reinstall, to solve this error but still the result is still failed. i've tried to follow metalink suggestion by Edit the PATH, CLASSPATH, and LD_LIBRARY_PATH environment variables so that they do not reference any Oracle home directories, try to transfer again the software installation to directory server and extract from cpio files(i thought maybe the software might be corrupted) but the result is still same, stuck at the same place..! if any of you have experienced this before or have any idea on which setup do i have to look again, pls reply me ya. pls help and your help is very much appreciated.thanks in advanced.Hi, welcome to the forums!
Have you already added the new node to Clusterware?. Have you followed all the steps detailed on the documentation?
The note *How to Add Node/Instance or Remove Node/Instance in 10gR2, 11gR1 and 11gR2 Oracle Clusterware and RAC [ID 1332451.1]* is a must read, which points to the public documentation.
If you already did that previous steps, you can enable a more detailed logging for the addnode execution with the parameters "-debug -logLevel finest", and setting this variables before running it again:
export SRVM_TRACE=true
export SRVM_TACE_LEVEL=2Regards. -
Program terminated error after entering sold to party no. in sales order
hello friends,
can any help me, i was doing the topic of user exit for pre-defined sold to party using v45a0002 in cmod and i wrote a program for include 'if sy-uname= 'sapuser'.
message e000(0) with ' you are not authorised to create so'
endif
while activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite error
after i tried create a order
program terminated error after entering sold to party no. in sales order
so i have deactivated the project created in cmod & deleted the project inspite i am getting the program terminated error
i am sending total error plz reply quickly urgent friends
Runtime Errors SYNTAX_ERROR
Date and Time 19.04.2008 17:51:58
ShrtText
Syntax error in program "SAPLXVVA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLVKMP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXVVA ", the following syntax error occurred
in the Include "ZXVVAU04 " in line 5:
"The last statement is not complete (period missing)."
Author and last person to change the Include are:
Author "SAPUSER "
Last changed by "SAPUSER "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXVVA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXVVA ", the following syntax error occurred:
"The last statement is not complete (period missing)."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "mtpl7"
Network address.......... "192.100.10.1"
Operating system......... "Windows NT"
Release.................. "5.1"
Hardware type............ "2x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "MTPL7"
Database type............ "ORACLE"
Database name............ "ERP"
Database owner........... "SAPERP"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 8362368
Heap..................... 0
Page..................... 122880
MM Used.................. 4229224
MM Free.................. 995472
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPLVKMP"
Screen.............. "SAPMV45A 4701"
Screen line......... 16
Information on where terminated
The termination occurred in the ABAP program "SAPLVKMP" in
"SD_DETERMINE_KKBER".
The main program was "SAPMV45A ".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
4
SY-LSIND
0
SY-PAGNO
1
SY-LINNO
8
SY-COLNO
1
SY-PFKEY
U
SY-UCOMM
SY-TITLE
Create Standard Order kb: Overview
SY-MSGTY
E
SY-MSGID
VP
SY-MSGNO
106
SY-MSGV1
BUS2032
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
12 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
11 FUNCTION SAPLV09B LV09BU30 148
SD_PCHECK_PAYER_IN_CREDITAREA
10 FUNCTION SAPLV09B LV09BU26 296
SD_PARTNER_EXECUTE_CHECKS
9 FUNCTION SAPLV09B LV09BU25 57
SD_PARTNER_CHECK_BEFORE
8 FUNCTION SAPLV09A LV09AU26 342
SD_PARTNER_SINGLE_MODIFY
7 FORM SAPLV09A LV09AF39 176
PARTNER_SELECTION
6 FUNCTION SAPLV09A LV09AU29 820
SD_PARTNER_DETERMINATION
5 FUNCTION SAPLV05E LV05EU01 654
VIEW_KUAGV
4 FORM SAPMV45A MV45AF0K_KUAGV_SELECT 40
KUAGV_SELECT
3 FORM SAPMV45A MV45AF0A_AUFTRAGGEBER_PRUEFEN 46
AUFTRAGGEBER_PRUEFEN
2 FORM SAPMV45A MV45AF0K_KUNDEN_PRUEFEN 454
KUNDEN_PRUEFEN
1 MODULE (PAI) SAPMV45A MV45AI0K_KUNDEN_PRUEFEN 15
KUNDEN_PRUEFEN
Chosen variables
Name
Val.
No. 13 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
FUNCTION=SD_PCHECK_PAYER_IN_CREDITAREADATA=LVT_CREDIT_XVBPA
Table reference: 275
TABH+ 0(20) = 70A2883B388BC43B0000000013010000CF060000
TABH+ 20(20) = 020000001E020000FFFFFFFF04910100D82F0000
TABH+ 40( 8) = 02000000C1248400
store = 0x70A2883B
ext1 = 0x388BC43B
shmId = 0 (0x00000000)
id = 275 (0x13010000)
label = 1743 (0xCF060000)
fill = 2 (0x02000000)
leng = 542 (0x1E020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 2 (0x02000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x28C1883B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 2 (0x02000000)
lineAlloc = 2 (0x02000000)
store_id = 690 (0xB2020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x28A4883B
>>>>> 2nd level extension part <<<<<
tabhBack = 0x109C883B
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
I_KKBER
2222
0000
FCODE_KOMM_LIEF_MENGE_SICH
MOD2
44432222222222222222
DF420000000000000000
SYST-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
%_SPACE
2
0
FCODE_KONFIGURATION1
POKO
54442222222222222222
0FBF0000000000000000
CREDIT_CHECK
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
SY-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
SAV_BUKRS
SS00
5533
3300
CHAR_
2
0
%_DUMMY$$
2222
0000
AUTOMO_VOLVO
08
33
08
SPACE
2
0
FCODE_ABRUF_GENERIEREN
PABG
54442222222222222222
01270000000000000000
XVBRK
00000000 0000000
2222222222222222222222222222222222222222222222223333333322222222223333333222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
KOPGR_LIEFERPLAN
LL
4422
CC00
FCODE_ZUSAETZE_FAB
PFZU
54552222222222222222
06A50000000000000000
FCODE_REPARATUR
PREP
55452222222222222222
02500000000000000000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
FCODE_GEFAHRGUT
KGGP
44452222222222222222
B7700000000000000000
I_KKBER_HELP
2222
0000
T001
800SS00SRIYA TEXTILES HYDERABAD IN INR EINT 10K41 0000050495DE1
3335533554542545544452222222222245445444422222222222222224424452244452334332222223333333333443
800330032991045849C530000000000089452121400000000000000009E09E20059E4010B410000000000050495451
FCODE_STOFFBERICHTE
IEHS
44452222222222222222
95830000000000000000
T001-BUKRS
SS00
5533
3300
No. 12 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
I_KKBER
2222
0000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
I_KKBER_HELP
2222
0000
No. 11 Ty. FUNCTION
Name SD_PCHECK_PAYER_IN_CREDITAREA
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_CHECKTYPE
I
4
9
FIF_MSGTYPE
E
4
5
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_KKBER2
2222
0000
LVF_KUNNR
7000000000
3333333333
7000000000
SYST-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
LVF_KURGV2
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
FIS_SDORGDATA-SPART
SM
54
3D
FIS_SDORGDATA-VKORG
T000
5333
4000
FIS_SDORGDATA-VTWEG
S4
53
34
%_O_SD_PARTNER_CONTEXT-HEX_0004
1
0
LVT_CREDIT_XVBPA
Table IT_1743[2x542]
LVF_KKBER1
2222
0000
GCS_HERTAB
ABCDEFG
24444444
01234567
%_DUMMY$$
2222
0000
SY-SUBRC
0
0000
0000
LVF_BEFORE_PARVW
2222
0000
No. 10 Ty. FUNCTION
Name SD_PARTNER_EXECUTE_CHECKS
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_MSGTYPE_TO_EXEC
E
4222
5000
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_ALL_PREDECESSORS_SUCCEEDED
X
5
8
FALSE
2
0
GS_MARKED_PARTNERS
222222222222
000000000000
LVT_CHECKCALLSTACK
Table IT_1515[21x52]
FUNCTION=SD_PARTNER_EXECUTE_CHECKSDATA=LVT_CHECKCALLSTACK
Table reference: 219
TABH+ 0(20) = E8C3863B0000000000000000DB000000EB050000
TABH+ 20(20) = 1500000034000000F00000000491010058090000
TABH+ 40( 8) = 15000000C1248000
store = 0xE8C3863B
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 219 (0xDB000000)
label = 1515 (0xEB050000)
fill = 21 (0x15000000)
leng = 52 (0x34000000)
loop = 240 (0xF0000000)
xtyp = TYPE#000033
occu = 21 (0x15000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x90BF863B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 21 (0x15000000)
lineAlloc = 21 (0x15000000)
store_id = 595 (0x53020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LVS_CHECKCALLSTACK_WA
80000018BUS2030 SD_PCHECK_PAYER_IN_CREDITAREA XX
3333333345533332225455444445545455445454445454422255
80000018253203000034F03853BF01952F9EF325494125100088
GT_MARKED_FOR_DEL_PARTNERS
Table[initial]
LVS_CHECKCALLSTACK_WA-FUNCNAME
SD_PCHECK_PAYER_IN_CREDITAREA
545544444554545544545444545442
34F03853BF01952F9EF32549412510
GC_NO_ACTION
2
0
GC_NEW_PARTNER
I
4
9
GVC_PARTNER_CONTEXT
CONTEXT_X_SD_PARTNER_CONTEXT fò####################################################
44454555555455455445544454552222222222226F0000000000000000000000000000000000000000000000000000
3FE4584F8F34F0124E52F3FE4584000000000000620000000000000000000000000000000000000000000000000000
GC_ERROR
E
4
5
GC_PROCESSMODE_DIALOG
D
4
4
LVF_MSGTYP
E
4
5
BUFFER_FULL_FILLED
F
4
6
POS_NUL
000000
333333
000000
BUFFER_PARTITIAL_FILLED
P
5
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES
0001000200030004000500060007000800090010001100120013NONE
33333333333333333333333333333333333333333333333333334444
0001000200030004000500060007000800090010001100120013EFE5
GCS_PARTNER_TYPE
KUAPLIPE
45454454
B510C905
LVF_RTYPE
0003
3333
0003
GCS_PARTNER_CALL_BACK_EVENTS
CHANGE DELETE NEW
444444222244445422224452222222
381E75000045C5450000E570000000
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCF_INITIAL_PARTNER
0
32
00
GCF_CALLER_TRANSPORT
T
5
4
TPACHECKRELATION
0000000000
2223333333333
0000000000000
GC_APPL_LOG
SDBFPD
54445422222222222222
34260400000000000000
SY-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
GVC_PARTNER_CONTEXT-B0007-PARVW
RG
54
27
No. 9 Ty. FUNCTION
Name SD_PARTNER_CHECK_BEFORE
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LS_STATISTICS
########################4 ################
00000000000000000000000032220000000000000000
00000000000000000000000040000000000000000000
No. 8 Ty. FUNCTION
Name SD_PARTNER_SINGLE_MODIFY
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BOKRE
2
0
FIF_CLEAR_APPL_LOG
X
5
8
FIF_DIALOG
2
0
FIF_HARD_DELETION
2
0
FIF_HISTUNR
00
33
00
FIF_HZUOR
00
33
00
FIF_INITIAL_VALUE
X
5
8
FIF_KNREF_PARNR
2222222222
0000000000
FIF_KUNNR_NEW
7000000000
3333333333
7000000000
FIF_KUNNR_OLD
2222222222
0000000000
FIF_LISTPROCESSING
2
0
FIF_MANUAL_ADDRESS
2222222222
0000000000
FIF_MANUAL_ADDRESS_ORIGIN
2
0
FIF_NO_CPD_DIALOG
2
0
FIF_NO_DIALOG
2
0
FIF_NO_MESSAGES
2
0
FIF_PARGR
TA
5422
4100
FIF_PARTIAL_NEW_DETERMINATION
2
0
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_PRFRE
2
0
FIF_VKORG
2222
0000
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FEV_ACTION_DONE
I
4
9
FRF_LOG_COUNT
0
0000
0000
SYST-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
GVT_LOCAL_CALL_BACK_MEMORY[]
Table[initial]
%_SPACE
2
0
SY-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
LVF_ACTION_TODO
I
4
9
GC_UPD_PARTNER
U
5
5
%_VIASELSCR
0
4
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES-SHIP_TO
0002
3333
0002
LVF_NRART
KU
45
B5
LVF_KUNNR_NEW
7000000000
3333333333
7000000000
GCS_ADDRESS_GROUP
SD01CA01
54334433
34013101
GCF_APPL_TABLE_SD
VBUK
5454222222
625B000000
LVF_ROLETYPE
0003
3333
0003
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LVF_MESSAGE_COUNT
0
0000
0000
%_DUMMY$$
2222
0000
GCF_ADDRESS_TYPE_CONT_PERSON
3
3
3
No. 7 Ty. FORM
Name PARTNER_SELECTION
TVTA
000
222222222222222222222222222222222333222222222222222
000000000000000000000000000000000000000000000000000
TPAER
00
22222222222222332222
00000000000000000000
LVS_XVBPA
000000RG7000000000 0000000000000000000000050510
2222222222222333333543333333333222222222233333333333333333333333333332222222222222222222222222
0000000000000000000277000000000000000000000000000000000000000000505100000000000000000000000000
LVF_PARNR
7000000000
3333333333
7000000000
PIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
PIC_OBJECTTYPE
BUS2032
4553333222
2532032000
PIF_NO_DIALOG
2
0
PIF_PARGR
TA
5422
4100
LVF_PARVW
RG
5422
2700
PIF_POSNRHi Kartik,
Could you please be more clearer as to how do you want me to proceed so that this syntax error stops bothering me while creating a standard order thru TCode VA01.Also what do you mean by "well comment the code in the include and activate the include"
I created a projet in CMOD and than added the enhancement V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
so now i have deactivated the project which i created in CMOD & deleted the project also inspite of this i am getting the program terminated error while making the order
I would be great ful if somebody helps me *** out of this syntax error.
Thanks
Rishi -
Please help, java program terminating unexpectedly without reason
ok, so I have a project I'm working on, here's its description:
Create a new project named FML_Pig where F is your first initial, M is your middle initial, and L is your last initial. For example, if your name is Alfred Edward Neuman then you would name your project AEN_Pig. If necessary, add a new Java file to this project named FML_Pig.
Add a java file to the project named FML_Dice.
Design and implement a Dice class as follows. The Dice class has 2 twenty‑sided dice with numbers on the faces (1 � 20) and 2 twenty-six-sided dice with letters on the faces (a � z).
import java.util.Random;
public class FML_Dice
private static Random gen = new Random();
private final static int NUM_SIDES = 20;
private int die1, die2, numSnakeEyes, numVowels, totalPoints;
private char die3, die4;
Part 1
Add a rollDice() method to your FML_Dice class that sets die1 and die2 to a random number between 1 and 20 and it sets die3 and die4 to a random character between �a� and �z�.
Helpful Hint:
dice3 = (char)(�a� + gen.nextInt(26)); // sets dice3 to a random char between �a� and �z�.
Part 2
Write a constructor that sets die1 and die2 to a random number between 1 and 20 and it sets die3 and die4 to a random character. Your constructor can simply call rollDice() to do this. It should also initialize numSnakeEyes, numVowels, and totalPoints to 0 (after you roll the dice).
Part 3
Write methods getDie1(), getDie2(), getDie3(), and getDie4() that returns the value of the respective die. Write a method numSnakes() that returns the number of snake eyes that have been rolled. Write a method numVowels() that returns the number of vowels that have been rolled. Write a method totalPts() that returns the totalPoints.
Part 4
Write a toString() method that overwrites the default toString() method. It should return a String representation of the value of all 4 die. For example, 17 2 h w.
Part 5
Write a method updateTotals that updates numVowels, numSnakeEyes, and totalPoints based on the current values of die1, die2, die3, and die4. numVowels should be incremented by 1 if either die3 or die4 are a vowel. However, if both die3 and die4 are vowels, the totalPoints should be reset to 0 and numVowels should be reset to 0 also. numSnakeEyes should be incremented by 1 if either die1 or die2 have a face value of 1 (this is not truly a snake eyes, but it gives better odds for the game). totalPoints should be incremented by the sum of die1 and die2 multiplied by (numSnakeEyes + 1).
Part 6
Write a main program (use the one in FML_Pig.java) that plays a game of Pig. In this game, two people play against each other. Player1 begins by rolling the dice. The total of die1 and die2 is added to his total score. Player1�s turn continues until he/she rolls a total of 4 vowels then the turn switches to Player2. Whenever a turn switches to the other player, the number of vowels is reset to zero. Also, if at any time both die3 and die4 are vowels, the total score is reset to 0 and the turn switches to the other player. (So the turn switches to the other player whenever the total number of vowels reaches four or there are two vowels rolled at the same time.)
If a player rolls snakeeyes (for our game, snakeeyes occurs whenever either of the dice have a face value of one � in reality, both die1 and die2 should have a face value of one but then snakeeyes would occur only once every 400 rolls), then his point values are doubled from that point on (all future rolls for the rest of the game, point values for this player are doubled). When a player rolls snake eyes again, point values are tripled for that roll and all future rolls. (Three snake eyes, quadrupled, etc.)
(continued on the next page)
Be sure to display the results of the roll for each turn.
First player to get to 2000 points wins the game and gets to oink like a pig.
Note: Both players need their own set of Dice since the Dice keeps track of the totalPoints, the number of snake eyes rolled so far, and the number of vowels rolled so far for that particular player. You can do this simply by declaring it that way in the main program:
Dice player1 = new Dice();
Dice player2 = new Dice();
You may add additional methods and instance variables to the class as needed. For example, I would probably write a private helper method isVowel() that is passed a char argument ch and returns true if ch is a vowel.
Also, you can have the computer play for both player 1 and player 2. Simply loop it until somebody wins. Print out the result for each turn including who rolled the dice (player 1 or player 2), what they rolled, how many snakeeyes do they have, how many points did they get for this turn, and how many total points do they have.
When you are completely finished, hand in just the java files (FLM_Dice & FLM_Pig). If you happened to write any other classes, make sure they are named with the FML format, and turn these in as well. I do not need EasyReader or p.
Oink! Oink!
This pig won the game --------->
so here's my code:
this isn't my code but is required to compile my code: // package com.skylit.io;
import java.io.*;
* @author Gary Litvin
* @version 1.2, 5/30/02
* Written as part of
* <i>Java Methods: An Introduction to Object-Oriented Programming</i>
* (Skylight Publishing 2001, ISBN 0-9654853-7-4)
* and
* <i>Java Methods AB: Data Structures</i>
* (Skylight Publishing 2003, ISBN 0-9654853-1-5)
* EasyReader provides simple methods for reading the console and
* for opening and reading text files. All exceptions are handled
* inside the class and are hidden from the user.
* <xmp>
* Example:
* =======
* EasyReader console = new EasyReader();
* System.out.print("Enter input file name: ");
* String fileName = console.readLine();
* EasyReader inFile = new EasyReader(fileName);
* if (inFile.bad())
* System.err.println("Can't open " + fileName);
* System.exit(1);
* String firstLine = inFile.readLine();
* if (!inFile.eof()) // or: if (firstLine != null)
* System.out.println("The first line is : " + firstLine);
* System.out.print("Enter the maximum number of integers to read: ");
* int maxCount = console.readInt();
* int k, count = 0;
* while (count < maxCount && !inFile.eof())
* k = inFile.readInt();
* if (!inFile.eof())
* // process or store this number
* count++;
* inFile.close(); // optional
* System.out.println(count + " numbers read");
* </xmp>
public class EasyReader
protected String myFileName;
protected BufferedReader myInFile;
protected int myErrorFlags = 0;
protected static final int OPENERROR = 0x0001;
protected static final int CLOSEERROR = 0x0002;
protected static final int READERROR = 0x0004;
protected static final int EOF = 0x0100;
* Constructor. Prepares console (System.in) for reading
public EasyReader()
myFileName = null;
myErrorFlags = 0;
myInFile = new BufferedReader(
new InputStreamReader(System.in), 128);
* Constructor. opens a file for reading
* @param fileName the name or pathname of the file
public EasyReader(String fileName)
myFileName = fileName;
myErrorFlags = 0;
try
myInFile = new BufferedReader(new FileReader(fileName), 1024);
catch (FileNotFoundException e)
myErrorFlags |= OPENERROR;
myFileName = null;
* Closes the file
public void close()
if (myFileName == null)
return;
try
myInFile.close();
catch (IOException e)
System.err.println("Error closing " + myFileName + "\n");
myErrorFlags |= CLOSEERROR;
* Checks the status of the file
* @return true if en error occurred opening or reading the file,
* false otherwise
public boolean bad()
return myErrorFlags != 0;
* Checks the EOF status of the file
* @return true if EOF was encountered in the previous read
* operation, false otherwise
public boolean eof()
return (myErrorFlags & EOF) != 0;
private boolean ready() throws IOException
return myFileName == null || myInFile.ready();
* Reads the next character from a file (any character including
* a space or a newline character).
* @return character read or <code>null</code> character
* (Unicode 0) if trying to read beyond the EOF
public char readChar()
char ch = '\u0000';
try
if (ready())
ch = (char)myInFile.read();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (ch == '\u0000')
myErrorFlags |= EOF;
return ch;
* Reads from the current position in the file up to and including
* the next newline character. The newline character is thrown away
* @return the read string (excluding the newline character) or
* null if trying to read beyond the EOF
public String readLine()
String s = null;
try
s = myInFile.readLine();
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
if (s == null)
myErrorFlags |= EOF;
return s;
* Skips whitespace and reads the next word (a string of consecutive
* non-whitespace characters (up to but excluding the next space,
* newline, etc.)
* @return the read string or null if trying to read beyond the EOF
public String readWord()
StringBuffer buffer = new StringBuffer(128);
char ch = ' ';
int count = 0;
String s = null;
try
while (ready() && Character.isWhitespace(ch))
ch = (char)myInFile.read();
while (ready() && !Character.isWhitespace(ch))
count++;
buffer.append(ch);
myInFile.mark(1);
ch = (char)myInFile.read();
if (count > 0)
myInFile.reset();
s = buffer.toString();
else
myErrorFlags |= EOF;
catch (IOException e)
if (myFileName != null)
System.err.println("Error reading " + myFileName + "\n");
myErrorFlags |= READERROR;
return s;
* Reads the next integer (without validating its format)
* @return the integer read or 0 if trying to read beyond the EOF
public int readInt()
String s = readWord();
if (s != null)
return Integer.parseInt(s);
else
return 0;
* Reads the next double (without validating its format)
* @return the number read or 0 if trying to read beyond the EOF
public double readDouble()
String s = readWord();
if (s != null)
return Double.parseDouble(s);
// in Java 1, use: return Double.valueOf(s).doubleValue();
else
return 0.0;
}same with this:
public class p
public static void l(String S)
{ System.out.println(S);}
public static void o(String S)
{System.out.print(S);}
public static void l(int i)
{ System.out.println(i);}
public static void o(int i)
{System.out.print(i);}
public static void l(boolean b)
{ System.out.println(b);}
public static void o(boolean b)
{System.out.print(b);}
public static void l(char c)
{ System.out.println(c);}
public static void o(char c)
{System.out.print(c);}
public static void l(double d)
{ System.out.println(d);}
public static void o(double d)
{System.out.print(d);}
public static void l(Object obj)
{ System.out.println(obj.toString());}
public static void o(Object obj)
{System.out.print(obj.toString());}
public static void l()
{System.out.println();}
} here's my code:
import java.util.*;
public class JMM_Pig
public static void main(String[] args)
int winner=0;
int pts=0;
JMM_Dice player1=new JMM_Dice();
JMM_Dice player2=new JMM_Dice();
p.l("Player 1 rolls the dice...");
player1.rollDice();
player1.updateTotals();
boolean loop=true;
while(loop)
while(player1.numVowels()<=4)
p.l("Player 1 continues his turn...");
player1.rollDice();
player1.updateTotals();
p.l("Player 1 rolled a "+player1.getDie1()+" and a "+player1.getDie2()+" and a '"+player1.getDie3()+"' and a '"+player1.getDie4()+"'");
p.l("Player 1 rolled "+player1.currvowels()+" vowels.");
p.l("Player 1 has "+player1.totalvowels()+" total vowels.");
//if(player1.getMagic()==1)
//player1.totalPoints=(player1.totalPoints+player1.getDie1()+player1.getDie2())*player1.mult;
//pts=(player1.totalPts()+player1.getDie1()+player1.getDie2())*player1.getMult();
//player1.setTpts(pts);
//if(player1.getMagic()!=1)
//player1.totalPoints=player1.totalPoints+player1.getDie1()+player1.getDie2();
//pts=player1.totalPts()+player1.getDie1()+player1.getDie2();
//player1.setTpts(pts);
p.l("Player 1 has "+player1.numSnakes()+" snake eyes.");
p.l("Player 1 earned "+player1.ptsreturn()+" points this turn.");
p.l("Player 1 has "+player1.totalPts()+" total points.");
pts=0;
if(player1.totalPts()>=2000)
winner=1;
player1.setNv(4);loop=false;
if((player1.isavowel(player1.getadice()))&&player1.isavowel(player1.getadice2()))
player1.setTpts(0);player1.setNv(0);player1.setNv(4);
p.l("Player 1's turn has ended...");
player1.setNv(0);
p.l("Player 2 rolls the dice...");
player2.rollDice();
player2.setTpts(player2.totalPts()+player2.getDie1()+player2.getDie2());
while(player2.numVowels()<=4)
p.l("Player 2 continues his turn...");
player2.rollDice();
player2.updateTotals();
p.l("Player 2 rolled a "+player2.getDie1()+" and a "+player2.getDie2()+" and a '"+player2.getDie3()+"' and a '"+player2.getDie4()+"'");
p.l("Player 2 rolled "+player2.currvowels()+" vowels.");
p.l("Player 2 has "+player2.totalvowels()+" total vowels.");
//if(player1.getMagic()==1)
//player1.totalPoints=(player1.totalPoints+player1.getDie1()+player1.getDie2())*player1.mult;
//pts=(player1.totalPts()+player1.getDie1()+player1.getDie2())*player1.getMult();
//player1.setTpts(pts);
//if(player1.getMagic()!=1)
//player1.totalPoints=player1.totalPoints+player1.getDie1()+player1.getDie2();
//pts=player1.totalPts()+player1.getDie1()+player1.getDie2();
//player1.setTpts(pts);
p.l("Player 2 has "+player2.numSnakes()+" snake eyes.");
p.l("Player 2 earned "+player2.ptsreturn()+" points this turn.");
p.l("Player 2 has "+player2.totalPts()+" total points.");
pts=0;
if(player2.totalPts()>=2000)
winner=2;
player2.setNv(4);loop=false;
if((player2.isavowel(player2.getadice()))&&player2.isavowel(player2.getadice2()))
player2.setTpts(0);player2.setNv(0);player2.setNv(4);
p.l("Player 2's turn has ended...");
player2.setNv(0);
if(player1.totalPts()>=2000)
winner=1;
loop=false;
if(player2.totalPts()>=2000)
winner=2;
loop=false;
} //main loop
if(winner==1)
p.l("It ended with the following statistics...");
p.l("Player 1's score was: "+player1.totalPts()+" and Player 2's score was: "+player2.totalPts());
p.l("Player 1 had: "+player1.numSnakes()+" snake eye(s) and Player 2 had: "+player2.numSnakes()+" snake eye(s)");
p.l("Player 1 wins, oink oink!");
if(winner==2)
p.l("It ended with the following statistics...");
p.l("Player 1's score was: "+player1.totalPts()+" and Player 2's score was: "+player2.totalPts());
p.l("Player 1 had: "+player1.numSnakes()+" snake eye(s) and Player 2 had: "+player2.numSnakes()+" snake eye(s)");
p.l("Player 2 wins, oink oink!");
and dice class:
import java.util.*;
public class JMM_Dice {
private static Random gen = new Random();
private final static int NUM_SIDES = 21;
private int die1, die2, numSnakeEyes, numVowels, totalPoints;
private char die3, die4;
private int dice=0;
//dice=
private int dice2=0;
//dice2=;
private String adice="";
//adice=;
private String adice2="";
//adice2;
private int magic=0;
private int mult=0;
private int currvowels=0;
private int totalvowels=0;
public static EasyReader key = new EasyReader();
public JMM_Dice()
dice=0;dice2=0;
String alpha="abcdefghijklmnopqrstuvwxyz";
adice="";adice2="";
rollDice();
numSnakeEyes=0;numVowels=0;totalPoints=0;
public void setTpts(int tpts)
this.totalPoints=tpts;
public void setNv(int nv)
this.numVowels=nv;
public int getDie1()
return dice;
public int getDie2()
return dice2;
public String getDie3()
return adice;
public String getDie4()
return adice2;
public int numSnakes()
return numSnakeEyes;
public void setSnakes(int s)
this.numSnakeEyes=s;
public String getadice()
return this.adice;
public String getadice2()
return this.adice2;
public int numVowels()
return numVowels;
public int getMagic()
return this.magic;
public int getNv()
return this.numVowels;
public void setMagic(int mag)
this.magic=mag;
public int getMult()
return this.mult;
public void setMult(int m)
this.mult=m;
public int totalPts()
return totalPoints;
public String toString()
return dice+""+dice2+""+adice+""+adice2;
public boolean isavowel(String str)
if(str.equals("a")||str.equals("e")||str.equals("i")||str.equals("o")||str.equals("u"))
return true;
else
return false;
public int ptsreturn()
return dice+dice2;
public int currvowels()
int tmp=currvowels;
currvowels=0;
return tmp;
public int totalvowels()
return numVowels;
public void updateTotals()
if(adice.equalsIgnoreCase("a")||adice.equalsIgnoreCase("e")||adice.equalsIgnoreCase("i")||adice.equalsIgnoreCase("o")||adice.equalsIgnoreCase("u")||adice2.equalsIgnoreCase("a")||adice2.equalsIgnoreCase("e")||adice2.equalsIgnoreCase("i")||adice2.equalsIgnoreCase("o")||adice2.equalsIgnoreCase("u"))
numVowels++;currvowels++;
if((isavowel(adice))&&isavowel(adice2))
totalPoints=0;numVowels=0;
if(dice==1||dice2==1)
numSnakeEyes++;
int fd=dice;
int sd=dice2;
int sum=fd+sd;
totalPoints+=sum*(numSnakeEyes+1);
public void rollDice()
dice=gen.nextInt(20)+1;
dice2=gen.nextInt(20)+1;
String alpha="abcdefghijklmnopqrstuvwxyz";
adice=String.valueOf(alpha.charAt(gen.nextInt(26)));
adice2=String.valueOf(alpha.charAt(gen.nextInt(26)));
public static void sleep (int wait)
{ long timeToQuit = System.currentTimeMillis() + wait;
while (System.currentTimeMillis() < timeToQuit)
; // take no action
}the program works fine except it's supposed to terminate when one of the two AIs get a score of 2000, right now it terminates no matter what score the AIs get and no matter what I've tried to do it keeps doing that...can someone please tell me why it's terminating so oddly? Thanks! :)Here's how my code works in a nutshell, the main program starts with the boolean loop=true;
while(loop)
{then comes the loops for the two AIs, first the player 1 AI goes with this loop: while(player1.numVowels()<=4)
{there the player 1 roles the dice and it keeps going until player 1 gets a total of 2000 points at which time this is supposed to execute: if(player1.totalPts()>=2000)
winner=1;
player1.setNv(4);loop=false;
}, player1.setNv(4); sets numVowels to 4 so that the inner loop exits, loop=false exits the other loop and winner=1; specifies that player 1 won which is used outside of the loops here: if(winner==1)
p.l("It ended with the following statistics...");
p.l("Player 1's score was: "+player1.totalPts()+" and Player 2's score was: "+player2.totalPts());
p.l("Player 1 had: "+player1.numSnakes()+" snake eye(s) and Player 2 had: "+player2.numSnakes()+" snake eye(s)");
p.l("Player 1 wins, oink oink!");
if(winner==2)
p.l("It ended with the following statistics...");
p.l("Player 1's score was: "+player1.totalPts()+" and Player 2's score was: "+player2.totalPts());
p.l("Player 1 had: "+player1.numSnakes()+" snake eye(s) and Player 2 had: "+player2.numSnakes()+" snake eye(s)");
p.l("Player 2 wins, oink oink!");
} the same thing happens for player 2 if player 1 didn't already get 2000 points...but the if statement despite everything pointing to the variables containing the right values don't seem to be working, as shown by the example program output I posted it just ends at any random number...hopefully this helps make figuring out what's wrong easier :) ...so can anyone please help me out? thanks! :) -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
Maybe you are looking for
-
If i open a new window instead of a new tab, in the new window does not appear the menu tab
i want to open new windows instead of tabs and in the new window should appear the menu tab and scrolling up and down, but now with the new version the menu tab does not appear and i cannot scroll up and down.
-
Since updating my wife's iPad to the latest iOS ver this morning none of her applications load. When clicked, the screen goes black for a moment and then back to the home screen. I tried a reset (Holding down the power button until the apple logo a
-
hi everyone i just updated my nokia lumia 1020 to the new lumia black software. the problem is that after doing the update, raw support doesn't show under camera settings, neither story teller, neither live folder. does anybody have a solution?
-
hi has anyone experienced the attached error when running the execute task function of RSP.
-
I'm having an odd problem. With iChat launched and online, Automator is returning an error of 'Application isn't running' when I run the following script: on run {input, parameters} tell application "iChat" set status to offline end tell end run Runn