Exsice tab not display in migo transaction
Dear All,
for this error i got one note 1079123, i am using Ecc 6.0 Ehp4.
when my basis person is going to apply that patch, that time he is telling me this will not applicable for EHP4, this will use only in 602 version...
can any body help me.....
HI,
possible reasons are
1. the user is not assigned to that transaction.
2. in J1ID data will not be maintained properly.
3. In your p.o your not maintained proper taxcode.
Similar Messages
-
Excise Tab not display in MIGO
Hi,
I had prepare import PO mentioning all custom duty (CVD),
While doing MIGO, excise tab is not displaying it in.
Please help me, its urgent matter
thank's in advance
Parag LuteHi,
It means Manufacturing plant setting is not done in SPRO and DC plants have been configured.
Follow following Menu path
SPRO> Logistics General> Tax On Goods movement> India> basic Settings-->Maintain Plant settings
Enter manufacturing plants here and delete the DC plants existing over there.
Reward if helpful -
Excise Tab not appearing in MIGO Screen
Excise Tab not appearing in MIGO Screen
Reg
SunilHi,
For GR, which movement type you are using...?
If it is 103, you will get the excise invoice tab only in 105 GR.
If it is 101 only, check the following configuration.
SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
Please revert for further analysis.
Regards,
Siva -
Excise tab not required in MIGO if Inventorised tax code is used
hi expert
Can we define systen if if Inventorised tax code is used ,Excise tab not required in MIGO .
regard
NabilHi,
as per me excise tab depend on J1ID setting, you know this
Not on tax code or on condition
Regards
Kailas Ugale -
Excise Invoice Tab not appeared in MIGO Display mode
Dear All Guru,
we are facing a problem after posting excise invoice,we are not able to see excise invoice tab in MIGO display mode .We are done all necessary patch uploading but there are some ABAP programming change related to MIGO display.
Pls, send necessary note or some clue.
Thanks,
AbhijitHi Abhijit,
How you posted the excise invoice, have you done this posting in MIGO transaction or in J1IEX transaction.
If you have not gor the Excise tab in MIGO while posting you cann't get the same after posting also. You need to do settings for this in IMG settings for the excise group customization then you will get this excise invoice tab in MIGO
Hope you understand.
rgds
Chidanand -
MIGO - EXCISE TAB NOT DISPLAYED
Hi Experts
In MIGO, Excise Invoice tab is displayed during the Creation Mode, but in the MIGO display mode the Excise Invoice tab is not displayed, what could be the reason pls suggest me.
Thanks in advance.
Regards
RajaramHi,
Check whether SAP Note 1079123 - Missing Excise tab in MIGO is applied properly or not?
Symptom: - In Transaction MIGO, in case of goods receipt with excise,Excise Tab forthe corresponding material document is not displayed from Release 470 andabove.
Solution: - Please apply the code changes as specified in the note. -
Re: Excise tab is not displaying in migo.
My end user has created an asset P.O. Then while executing migo excise tab is not displaying. what is the fault, & where we have to correct it. its ur.
thanks
tuljasingh.Hi,
While doing MIGO transaction the excise tab will appear only if you mark your line item as OK in your MIGO item details.
Try to simulate MIGO by marking your item as OK then excise tab will appear & if the excise values are not flowing in the excise tab check the following
J1ID excise master
1. Plant - Material - Chapter ID combination
2. Vendor Plant Excise Details.
3. Excise Tax Rates for Chapter ID/Plant combination.
Check whether the rates are there in your PO or not?
Also check the whether you have maitained the Default excise condition types in SPRO/LG/Tax on Goods movements/India/ Basic Settings -Maintain Excise Defaults.
Regards, -
Excise tab is not displaying in migo
Hi,
for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying.
note:- for all other materials(purchase order), excise tab is displaying.
could you please solve this problem.
thanks/regards
vishHi,
Check the problem with repect to the material,
Check if the Tax % is assigned properly for the combination of tht material. check J1ID,
Is in the PO the excise amount calculated? Check the condition records?
Thanks & Regards
Kiran -
Excise Invoice Tab is not displaying in MIGO Display for 541 material docs.
Dear All,
Excise Invoice Tab is not getting displayed in MIGO Display for 541(Transfer posting to Vendor) material documents.
I did tranfer posting of some raw materials to the Vendor in MB1B with the movement type 541
and after that i have created a Subcontracting Challan with the reference of the above created transfer posting
material document.
Now i need the Sub contracting challan number to be displayed in the Excise Tab of the transfer posting material document.
But if i display the Transfer posting material document in MIGO, the Excise Tab is not getting displayed.
Kindly help on this so that i can view the Sub contracting challan number in the display of the respective Trasfer posting material document in MIGO.
Thanks & Regards.Pls confirm if you are following the SC process sequence :
u2022 Creation of Subcontracting PO, here in conditions tab maintain the price (Subcontracting charge) (ME21N)
u2022 Transfer Posting of Components to Subcontractor ( Movmt Type - 541) (MB1B/ME2O/MIGO)
u2022 Creation of Subcontracting Challan w.r.t. Transfer Posting Doc (J1IF01) - This challan will have the details normally company needs, in case client need more ... ABAPer have to develop customized smart form
u2022 Goods Receipt w.r.t. Subcontracting PO and Refer Subcontracting Challan at the time of GR (MIGO) {GR with 101 and auto consumption of components with 543 movement}
u2022 Reconciliation of Subcontracting Challan (J1IFQ)
u2022 Completion of Subcontracting Challan (J1IF13)
u2022 Generation of Annexure IV (J1IFR -
Excise Invoice Tab is not display in MIGO for Cancelled document
Hi,
We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
As per my understanding the excise tab should come for cancelled doucment also.
Regards
RajevHi,
You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
but it will come for 101
.But it is not coming for 101
can you explain your statement ?
If it is not coming for 101 movement type
check following point
1) tax code in PO ,all excise condition should be there
2) Maintain chapter ID material combination in J1ID
3) Maintain Vendor and Plant excise details in J1ID
Regards
Kailas Ugale -
Excise Invoice tab not appearing in MIGO
Hi all,
While doing MIGO, we only capture Excise Invoice and Part I is updated. We avail Cenvat thru J1IEX and update Part II separately. We could process both these transactions but after posting, when we display the GR, we can not see the Excise Invoice Tab and Excise item though entries have been posted.
Can anybody suggest how can we bring this tab in GR display
Bhaven SelarkaHi,
1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
2)If you are following TAXINN,Then u should maintain Tax code to Company code.
If u are Using TAXINJ,U should maintain Excise Defaults.
3)In Excise Group,U should Activate MIGO transactions.
4)Check ur TAX code,Tax code is Deductable or non dedctable.
Raghu -
SECess is not displaying in MIGO
Hi MM Guru,
I am a ABAP'er, In my client we are struggling on MIGO Transaction. In that SECess field is not dispaying in Excise Item. But in Header level we its showing.
Could u suggest me what I have to do?
Recently we got a Registration Key, Please Guide Me.
Regards,
Dhanush.S.THi,
goto tcode SE80, there select program, give program name as
SAPLJ1IEXGM and press enter, there u can see screen, select screen number 220, click on layout button, go into change mode, below Cess field there is a field hidden J_1IEXITEM-TOTAL_AT1, double click on it, u can see a display tab there clickon that u can see a checkbox with invisible ticked remove the tick and activate the screen.
Note - when u click to goto change mode it will ask u access key provide it and continue.
Cheers...
Santosh -
Dear Experts,
We have create new plant with reference to our existing plant, all testing done except MIGO.
At the time MIGO excise tab not open in case of excisesable material, we have already update ch id, Cenvat determination & Vendor excise details in J1ID
Please help
Regards
BK GAIKWADHi,
Check "Duty different at GR" check box selected or not in MIGO Setting segment in Maintaining Excise Group setting in following path( if not just select the check box)
SPRO ->>Logistics general ->> tax on Goods Movements-->>India -->> Basic setting -->>Maintain Excise Groups
Also check in above path the Excise Reg. is there in Excise Groups Segment.
For your new plant check Excise Reg. number is assigned in following path in Maintaining Plant Settings
SPRO ->> Logistics general ->> tax on Goods Movements->>India ->>Basic setting ->> Maintain Plant Settings
Regards,
Biju K -
Windows 8.0 taskbar properties navigation tab not displayed in windows 8.0
When I click on taskbar properties it does not display a navigation tab in my windows 8.0 notebook like it does in my desktop 8.1 system. How do I get Windows 8.0 to display the taskbar properties navigation tab?
Hi,
Win8 taskbar properties doesn’t have the navigation tab, win8.1 add the new tab, what actions did you want to perform? Maybe we can to achieve it by other solutions.
Regards,
Yolanda
Yolanda
TechNet Community Support -
Index tab not displaying in RoboHelp HTML
I'm using Robohelp HTML version 8.
When viewing a topic properties, the General and Advanced tabs are displayed, but I haven't found how to display the Index tab in this version.
Is this option not available in version 8?
Regards,Hi Cecil27 and welcome to the RH community.
Are you only seeing those two tabs? You should be seeing others as well (e.g. Status, File, See Also). Also where is your project located? If it is on a network drive, move it to a local drive and see if the problem still occurs.
The RoboColum(n)
@robocolumn
Colum McAndrew
Maybe you are looking for
-
Can I use a USB camera to import directly live footage into imovie as opposed to firewire?
Hi! I use iMovie to directly import live footage from my camcorder. I've been using old Mini DV cameras to do this but this technology is being outdated with camera manufacturers now all moving to USB. Can I use a USB camera to take live footage dire
-
Pivot table sorting with month_id and average column in BI publisher temp
In my project we are using the Oracle BI analysis for creating reports in BI publisher. At first we are creating the report in OBIEE answers then using it as data model in BI Pub. My reporting table holds data like below: Month_Name Year Month_Id Com
-
How do I install MS Silverlight on my iMac?
How do I install MS Silverlight on my iMac? Netflix requires it to view streaming video.
-
Problem with getting a service ticket - ignoring host name?
Hello, I've been struggling with this for several weeks on and off. The latest issue I have, is that when I try to obtain a service ticket it replaces the hostname I use with the ip address of the server. This then results in a 'Server not found in K
-
Problems printing with Elements 11
I have been using version 7. I could position the image on a page to avoid wastage when printing, for example print one 7x5 and one 8x6 on a sheet of A4. I now have version 11 and find the printing system has changed and I cannot get to grips this it