Extention Manager CC update problem

Over several weeks I have tried to install the Extension Manager CC update and it always fails. I completed everything that is noted in FAQ and troubleshooting. My last attempt included, uninstalling Extension Manager and re-installing. I continue to get an error code: U44M1P36.
What should I do next?
I just ran it again and got a different error code: U44M1P34.

Hi BroomfieldLK,
Moving the discussion to Downloading, Installing, Setting Up forum
Please try :
Re: Unable to install Creative Cloud Updates
Photoshop 14.1.2 Error Code: U44M1P34 since yesterday
Thanks,
Atul Saini

Similar Messages

CC 5.2 SP9 - Management view update problem

Hello all,
We are having trouble updating the management view, in CC SP09. After running full synchro jobs on profiles, then roles, then users, and finally updating the management view, the results seem wrong (in production, we were expecting about 50% of users with violations, while the management view did not see any)...
Any help would be appreciated, thanks!
Sophie Planchais

I stole this from another thread but at least it saves me typing it all in
Follow these instructions
1. Full user synch
2. Full role synch
3. Full profile synch
4. Batch risk analysis for users (full synch mode)
5. Batch risk analysis for roles (full synch mode)
6. Batch risk analysis for profiles (full synch mode)
7. Batch risk analysis for critical actions (full synch mode)
8. Management reports by itself.
Wait for each job to complete before you run the next one.
Sometimes I even run job 8 inbetween jobs 4-7, just to make sure. In other words the job order is then 4, 8, 5, 8, 6, 8, 7, 8. As I have had problems that job 8 will not finish (after 4, 5, 6, 7 have been run) which we surmise is due to too many changes being required.

Adobe Extension Manager CC Update problem

I made the switch over to Adobe CC and downloaded all the new "CC" apps including the Adobe Extension Mananger. I have saved extensions on my mac that I have paid for in the past so I added them to the new Extension manager and they showed up on the new apps without a problem. The problem I did encounter was that the extensions that I have are acouple versions behind and I have always updated them through the manager, but when I open the app to check for updates everything says up to date but I am 100% positive they are not.
Any ideas?

Because we have rewritten the code to refactor Extension Manager, we have no enough time to re-implement the update feature completely. Now update feature is only supported by command line tool. The update support in GUI will be available in the coming patch.
Currently you can run "/Applications/Adobe Extension Manager CC/Adobe Extension Manager CC.app/Contents/MacOS/ExManCmd" in the Terminal to update extensions. Running it without parameters will show the help information. Using "--list_update all" parameter will show all extensions which have update available, and Using "--update <extensionName>" parameter will update the specified extension.

Sony liveware manager update problem

Hi, my xperia arc s is facing an update problem in the liveware manager. The current software version in my phone is 3.2.7 but whenever i try to update to version 3.3.10, there show me this message. 'Package file was not signed correctly. Uninstall the previous copy of the app and try again.' I cant uninstall the app as it is a built in app. Please help. Thanks.

@NightRequiem this is the same version as what I currently have without any problems. In this circumstance it would be worthwhile running a repair via PC Companion:
1. Before you start you have to download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
Note! For some models you will be prompted to do a backup prior to the update and then restore.
3. Install and open PC Companion then select Support Zone.
4. Phone Software Update.
5. Start.
6. Repair Phone
7. Continue
8. Accept data removal
9. Next
10. Wait for prepare
11. Select Phone
12. Follow the connectionn steps
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Drivers / update problems on X230T

1. My UltraNav (Synaptics) TouchPoint and TouchPad work only until I log in to Windows (7 Pro x64). Telephone support suggested (after I got disconnected 3 times) that I use LSC to reinstall the driver, but I find no way to reinstall drivers in LSC.
2. LSC and Device Manager report a problem with a "Base System Device", but I find no further identifying information in the device properties, and Windows Update fails to locate an appropriate driver.
Presumably this is the related error (as seen in msinfo32):
29.05.2013 17:40 Windows Error Reporting Fault bucket , type 0
Event Name: PnPDriverNotFound
Response: Not available
Cab Id: 0

Problem signature:
P1: x64
P2: PCI\VEN_1180&DEV_E822&SUBSYS_220317AA&REV_07
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

...
There are many other error reports with the same fault bucket type, stretching back to my first commissioning of the laptop.
3. LSC shows no corresponding alerts, but the installation history in TVSU 5.02.0011 reports one package that "did not install" and one which "did not download". I was able to find these on the lenovo support page and download them, however, the second (Ericsson F5521 Mobile Broadband Driver) reported "Device driver software was not successfully installed" and specifically "Base system device - No driver found". Presumably this is the missing driver from 2 above. Despite the error message, the installation still demands a reboot. I have found an additional driver for the Ericsson F5521 on the lenovo support site and will attempt to install it after rebooting.
P.S. The second driver reported successful installation, and, when subsequently reinstalled, so did the first one.
Unfortunately, the problem with the missing driver for "Base System Device" in Device Manager persists.
Furthermore, since installing the Ericsson drivers, I get a crash report from MobileAccess.exe every time I start the computer.
P.P.S. going back to 1 above, uninstalling the UltraNav driver (from Device Manager) did not help. I had to uninstall *and* check "delete driver software. On the next restart, an earlier driver (16.1.1.0) was installed, which works.
Based on the HW ID, the mysterious "Base System Device" would appear to be the SD/MMC card reader. I found a driver (2.14.18.01) on the lenovo support site and will report back the results of my installation attempt after rebooting.
P.P.P.S. Unfortunately, the driver installation did not resolve this. Seeing that the Ericsson driver ahd been installed under "smart card reader", I uninstalled it, deleting the SW, but that didn't help either. A manual update of the driver for "Base System Device", pointing it at the driver which had been unpacked in C:\SWTOOLS\DRIVERS\multicard\Driver was also unhelpful. Then I saw this post, and noticed that the HW IDs in risdxc.inf did not match those shown in Device Manager. I have edited the file and reinstalled, acknowledging the "unsigned driver" warning, which presumably resulted from my tampering with the file. I will report back after rebooting.
P.P.P.P.S. I no longer get any complaints about "Base System Device", and even though I can't find the Ricoh SD/MMC card reader in Device Manager, the card reader seems to work. Now all I have to do is to reinstall the Ericsson driver ;-}
P.P.P.P.S. After reinstalling the Ericsson driver, LSC shows a clean bill of health. However, MobileAccess.exe is still crashing on system start. Since this page (the only one I could find on Mobile Access) does not mention Switzerland, and since I didn't get a SIM card from lenovo, I am just disabling startup in msconfig for the time being. I could have sworn getting it to run immediately after installing the Ericsson SW, and seeing a drop-down list in the Activation Wizard offering Swisscom as provider though !? Go figure.
X320T running Windows 8 Pro x64

To get the Ricoh driver installed properly, I had to edit risdxc.inf and reinstall again.
There seem to be 2 HW IDs associated:
PCI\VEN_1180&DEV_E822&SUBSYS_220317AA
and
PCI\VEN_1180&DEV_E823&SUBSYS_220317AA
However, since updating the X230T drivers, my BlackBerry Desktop Software (7.1.0.41) no longer sees my BlackBerry, so I can no longer sync it locally.
The Ericsson adapter seems to be working, even though MoibileAccess.exe isn't. I could get a connection using the Swisscom SIM card out of my BlackBerry.
In retrospect, I should probably have ordered a SIM card from lenovo, as it appears that would have given me 3 months of free mobile WAN via Swisscom. Unfortunately, Switzerland was not listed on the lenovo website as one of the countries in which the offer was available.
I would still be grateful for any hints as to what is wrong with MobileAccess.exe and how to fix it.
X320T running Windows 8 Pro x64

Fresh solaris 10 x86 install patch update problems 119060-17 ...

Just yesterday, i installed a fresh Solaris 10 x86 onto some pc hardware. After getting solaris installed and issues with my network card, i downloaded and installed the free version of the update manager 1.0.x. Next, i proceeded to update all the general patches for the solaris 10 system. I started with the command 'pprosvc -i' from a terminal. It then proceeded to download and validate a bunch of patches successfully until it hit the following 3 patches:
119060-17 ---- X11 6.6.2_x86: Xsun patch
122213-10 ---- GNOME 2.6.0_x86: GNOME Desktop Patch
122912-02 ---- SunOS 5.10_x86: Apache 1.3 Patch
All 3 failed some kind of validation and then crashed the pprosvc program, at which point it exited with the following error:
122912-02 cannot be validated
119060-17 cannot be validated
122912-02 cannot be validated
Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digital signature(s).
I also tried to use the GUI Update Manager to update, hoping the problem was isolated to pprosvc, but that problem was also in the GUI with a similar error message:
Error occurred...The detailed error message is: Unexpected Failure: java.lang.Throwable: ERROR: Failed to validate the digitial signature(s)
Anyone know why Sun's update patch process is so troublesome?
Getting Tired of Solaris Updates...
I should mention that this is the free solaris 10 x86 install and i don't have a service contract with Sun. If this problem persists, i don't think i'll get one, as i see only further problems after buying one.
tired and confused

Hi,
There is an issue with this that is currently being investigated. There is another thread that may shed some light on what is happening here;
http://forum.sun.com/jive/forum.jspa?forumID=316
Thread title is : Sun UC, Digitally Signed Patches Using New Verisign Certificates
In the short-term please ensure that the patch mentioned in it is installed.
To quote part of mentioned thread above:
"Once the Sun Update Connection client software is upgraded with patch 121118-06 (SPARC) or 121119-06 (x86/x64) or later revisions normal behavior will resume. "
If this fails to resolve your problem, would you be kind enough to post the output of the following command for analysis please;
# showrev -p | egrep -e '121454|121119|120336|121082|121564|122232|119789'
Sincerely,
Moderator.
Message was edited by:
ForumModerator

After effects trial Update problem.

Hi,
So I downloaded the Adobe After Effects trial, and on my desktop the AdobePatchInstaller appeared alongside two files: payloads & META- INF. I clicked on the Patch Installer ( I believe that was the right thing to do.) then a pop up comes up saying: Update Failed
Updates could not be applied.
Adobe application Manager may be damaged Download and Install a new copy of Adobe application manager. If problems persist, please contact Customer Support. So I downloaded, installed, and updated a new copy of Adobe application manager, yet " The Problem persists.) Same maessae appears. If you know whats gong on please tell me.
-Declan

Epicgymnast12 which update are you trying to download and install exactly? Can you open Adobe After Effects? Finally what operating system do you have installed?

Extension Manager CS4 Language Problem

I have try to install a extension with Extension Manager CS4.
But i find that it not appear in my flash CS4 component although it
appear in Extension Manager.
Then i check for the config directory in my document. I find
that it install in a wrong lanuage folder. I am using English
version CS4. But my windows is in Chinese. The Extension Manager
installed the extension inside the zh_cn folder instead of the en
folder. So, the ENGLISH flash can't find the extension. I need to
copy the extension manaul in order to make it work.
I installed with no problem with Extension Manager CS3. It
install to a correct directory. Is it a bug on the extension or
Extension Manager CS4?

i have do any thing as you said. but resault by the same
my window is chinese, and when i copy all from zh_cn to en folder, open flash cs4, i can see mc_tween apear in action frame, i make a movieclip,and begin codeing : #include "mc_tween2.as"
mc.xSlideTo(200,1)
when i press ctrl+enter to test , my god, it haven't do anny thing although my mc._x is 0
i give send that file to my friend, they said they can see it move.
i try to remove mc_tween and restar pc, after that, open flash, go to help\extention manager....., install mc_tween again, this time, mc_tween realy in my en folder, but when i test , it can't play.
this proplem appear for 3 month untill to day
please tell me how to install mc_tween whithow reinstall my win to enlish language (

Dreamweaver CS4 Extention Manager configuration problen

Hi,
I am trying to install a Dreamweaver Extention into CS4 Extention Manager.
When it opens, Dreamweaver does not show up.
When I tried to import the product (Dreamweaver CS4) I get an error message - The product configuration file xmanConfig.xml does not provide the display name tag. Please check your configuration.
I found the file, but I don't know how to fix the problem and get the extention installed.
Any suggestions?
Thanks,
Bonnie

Anyone have an answer for this? Please I really dont feeling like reformating my computer again

OMF and extent management

I have a few questions on OMF, extent management and going to 10g:
1) If I have mostly BLOB data, would it be better to create a bigfile tablespace or not?
2) For extent management, should I do local allocate?
3) If I use OMF, can I still specify autoextend for the datafiles?
4) If I create a tablespace for the BLOB data, would that be a good idea? Then make all the rest in another space, or does any one do that?

user3804901 wrote:
I have a few questions on OMF, extent management and going to 10g:
1) If I have mostly BLOB data, would it be better to create a bigfile tablespace or not?Not sure this is dependent on whether you have BLOB data. Something to consider w/ bigfile tablespaces and 10g, is the fact that, depending on the size of the datafile, you may create a performance problem for backups, as, RMAN cannot parallelize backups on a single datafile until 11g.
So, if you have a 4TB datafile, RMAN has to back it up sequentially, in 10g. As I said, this problem is solved in 11g.
2) For extent management, should I do local allocate? What's 'local allocate'? I recommend autoallocate. It's simple and effective.
3) If I use OMF, can I still specify autoextend for the datafiles?Yes.
4) If I create a tablespace for the BLOB data, would that be a good idea? Then make all the rest in another space, or does any one do that?Yes, you could certainly do something like that. Generally, deciding how to divide up space amongst multiple tablespaces, is for convenience, and maybe reporting purposes. If you follow the Stripe-And-Mirror-Everything (SAME) strategy, then using tablespaces to "divide up" I/O doesn't really make sense any more. Whatever works for you, in terms of easing management and reporting, is probably ok.
Hope that helps,
-Mark

C 3-00 Firmware Update Problem

Hi there mates ,
I have a nokia C 3 - 00 RM 614 with the firmware V 04.45 . As mentioned in the previous forum topic , i have a video playing problem, the phone crashes while playing any videos.On the other hand i am very happy for the rest of its functions. It is a great phone really.
So i decided the update its software via OTA , but in the middle of the process it comes up with a message '' the connection is lost '' kind of thing. Then i get a usb cable and tried the nokia software updater ( latest version ) .Guess what , in the middle of the the update process it comes up with a message ''the connection with your phone is lost'' again.It tells me that to plug out the usb cable and plug it again then continue .. I tried all the methods , and all the instructions but it didnt work again.My phone is stil alive and i can use it but cant update its firmware to 4.60 or 7.20 .. I live in Istanbul , Turkey by the way..
Finally i decided to download ovi suite ( latest version ) and try to update my phone via this tool. Well in the end of the story , , face the same problem again.. The connection is lost during the process of updating via usb cable.
Any ideas will be appreciated , i still am using my nokia with the old firmware and cant update it.
PS: I have done these updates with lots of phones so i am kinda experienced on it.
Ty Mates
Solved!
Go to Solution.

Well i finally manage to update my nokia firmware. Its was a really hard trying...
the OTA style didnt work at all, saying no new update or losing network connection..Nokia Software Updater didnt work at all too , as i mentioned before, it was loosing conection with the mobile during the update process, then one of the forums i read about using ovi suite may help ..
which i've tried it before on windows 7 and didnt work.
For the last time before taking my phone to the service point,i decided to use ovi suite .. waalaaaaa , i finally manage to update my C3 from 4.45 to 4.60

Lights-Out Management Firmware Update

I tried to execute the Lights-Out Management Firmware Update, which Apple released, today.
But my Xserve always gives my an error, when I start the update application.
Lights-Out Management Firmware Update: Bad executable (or shared library)
Does anybody have the same problem?
Thanks and Regards,
JO

There's a new firmware update out, version 1.1. I tried simply using Software Update but no luck. It seemed to think it installed both 1.0 and 1.1, but all I saw was 1.0, which (still) did not work.
But I tried something else, and I think this works. I cannot test it until tomorrow when I can actually touch the server (to unplug it).
Open the Terminal application and do the following (omitting the "% " which I include to indicate the prompt).
% sudo rm /Applications/Server/Xserve\ Lights-Out\ Management\ Firmware\ Update.app
% sudo rm /Library/Receipts/LOMUpdate.pkg
% sudo softwareupdate -i LOMUpdate-1.1
The last step is important. It should only download the 1.1 updater. This seemed to work for me. that is, it downloaded the 1.1 updater, which I was able to run (from /Applications/Server/). However it tells me I need to shut down and unplug the the Xserve for one minute, then boot up, then install the update. I cannot do that until I'm back at work tomorrow. We'll see!
--greg
Message was edited by: Greg Welch

My solution (or so I thought) to Power Manager/CPU throttling problems!!!

I have found a solution to all my Power Manager/CPU throttling problems!!! Though there is some good and bad news.
{EDIT: The problem has NOT been fixed, even after latest PowerManager (3.62) and BIOS (1.30) versions. Pretty much ignore anything I say below as the problem is still occurring. You can see my full post here: http://forum.lenovo.com/t5/W-Series-ThinkPad-Laptops/W520-Speedstep-not-working-properly-on-battery-...}
Good news: I have NONE of the throttling issues or inconsistent CPU frequency problems I was having before on AC or battery power. Everything, including TurboBoost on battery works! It is completely fixed! (I have no idea how this factors into Lenovo’s statements that TurboBoost is disabled on battery “by design”. There is at least one other post from someone else that also reported TurboBoost was working for them on battery)
Bad news: I don’t really know which one of the many things I tried actually worked. I am sorry I wasn’t more methodical about recording what I did and checking results, but this was my last ditch effort to get this fixed on my own without sending the system in for repair and frankly, I didn’t think it would work. Now that it has worked, I’m hoping my steps can help others.
For anyone interested, here’s what I did… and before anyone says something like “That has nothing to do with managing power/cpu, why would that help?!… etc., please keep in mind I’m just stating exactly what I did. I am aware some of the steps may not be relevant, but who knows… We all know how weird PC’s are sometimes, even the smallest, oddest thing may resolve a problem.So anyway, here goes.
**IMPORTANT** Not sure how many noticed, but there was a new version of Power Manager released a few weeks ago, 3.62. The PM driver seems to have stayed the same. That alone could very well be the sole fix, I’m not sure. You may just want to completely remove PM and PM driver and install the latest version before trying any of the steps below.
1)Made a complete system image via Windows built-in backup feature
2)Disable any 3rd party fan/CPU control utilities (Throttlestop, etc). Make sure they are also not going to run at startup or from a scheduled task
3)Remove Power Manager Driver, then remove Power Manager software
4)Reboot to Windows
5)Remove all traces of the Power Manager drivers/software directories (think it was something like C:\readyapps and C:\drivers.) **For some odd reason after I did this, my wireless stopped working but it resolved itself by the time I was done with these steps, strange
6)Reboot
7)Access BIOS and reset all settings to default
8)Boot into Windows, downgrade to BIOS 1.25 [UEFI: 1.25 - 8BET44WW / ECP: 1.14 8AHT32WW ] via the Windows flash utility. I wanted to downgrade all the way back to 1.06, but the software would throw up some error for any version prior to 1.25 and wouldn’t proceed
9)Reboot to Windows; make sure system booted w/ out issues
10)Reboot again, access BIOS, reset to defaults again
11)Shut down system
12)Disconnect AC power. Remove main battery. Access and disconnect system backup (a.k.a CMOS) battery under keyboard. Discharge residual power in the system (there are various ways to do this, but you could just leave the battery disconnected for a few minutes). Visually inspect the system for anything funky…my system had a slightly but noticeably loose CPU/GPU heat sink/fan assembly power connector.
13)Reconnect backup battery.
14)Reconnect AC power but leave main battery disconnected.
15)Power on. Should get a message indicating “checksum error, system time reset” or something like that.
16)Reboot to Windows. Verified still okay.
17)Downloaded latest BIOS version, 1.26. This time I burned the bootable BIOS flash CD instead of running it through Windows.
18)Restart and boot from disc, flash BIOS to 1.26. Once complete, restart. Verify BIOS set to defaults.
19)Boot back into Windows.
20)Install latest Power Manager driver (1.62 ), reboot if/as prompted. Install Power Manager (3.62), reboot as prompted.
21)Boot into Windows, verified Power Manager was active and working. Verified TurboBoost was working. Restarted system a few times and played around with Power Manager for a bit to see if the different power plans worked and retained the settings, all the while monitoring the Intel TurboBoost utility and PM’s own “power gauges”. Let system Sleep, changed power sources, resumed, etc. Everything was working great.
22)Shutdown, reconnect main battery. Booted into Windows. Again, fiddled with Power Manager for a bit, switching between power plans and AC/battery power. Still worked great.
23)Success!
That’s it. Again, this is not a guaranteed fix guide. These are just simply the steps that I took on my system that resolved the problems many of us are having. Hopefully it will work for others.
T520 4239-CTO | i5 2410M
W520 4270-CTO | 2720QM | 16GB RAM | Quadro 1000M | BIOS 1.30 | PwrMgr 3.62

All I basically did was download and install...
(Chipset driver) http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/oss924ww.exe
(PM driver) http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/83ku14ww.exe
Now, I did chipset first (didnt ask to reboot) then installed the PM driver (did ask to reboot)
I rebooted.... then I went into bios (1.26) and set everything to default... then restarted saving changes...
Since I prefer not using optimus I changed the display settings in bios right after saving the default settings...
Not sure whether or not you really had to go into bios... but everything seems to be working...
My settings in PM is set to Maximum Power in the Advanced tab, 3rd party monitoring tools is TPFanControl and HWInfo64....
W520 (4270 CTO) | i7-2820QM | 16GB RAM 1333 MHz | Runcore MSATA SSD | 2x Kingston SATA2 SSD | Quadro 2000M | FHD | Windows 7

Update problem - VBDATA table

Dear All,
We have update problems in our Quality systems, and also in every R/3 system that we create from a Production system copy.
Sometime the UPD and UP2 work processes hung without apparent reason.
In the SM50 I can see one or more of my update processes running for a lot of time (many hours) on the table VBDATA without perform any action.
In the tcode SM12 I donu2019t see any kind of lock, and I donu2019t understand why only sometime this problem happens.
Of course, from the SM13 I can see that during this problem the system is not able to perform any kind of update.
As I told in the beginning of the message, I have the same problem in other two R/3 systems, both created with a system copy from the production system.
The Production and the Developer systems seem not affected by this problem.
Have you got any idea about the reason of the problem?
Even if the Production systems is not directly affected, all the IT department is not able to work on the Quality system (or any other Test system), and the only workaround is to kill the UPD (or UP2) WPs affected.
Thanks in advance,
Federico Biavati
My R/3 System is a 4.7 on SLES9 and Oracle 10.2.0.2

Hello Siva,
This is what I did:
> Check how many entries do you have in VBDATA currently.
More than 1.000 in every SAP systems that Iu2019m creating from Production
> You might want to run the reorganize updates program to clear the old updates
> that are pending/in error
Good point!!
After the reorganization (ST14 u2013 Reorganize update requests) the table VBDATA is empty.
Iu2019ll check and Iu2019ll let you know if the problem is definitively solved.
Thanks for you help,
Federico

Chart x scale update problem

LabVIEW 8.5.1
Sweep Chart Problem
The x scale values do not update until after the 2nd sweep. The red line cursor gets to the end of the sweep and starts the next, but the scale numbers do not update until the next sweep starts.
It appears to be a problem with the chart, since it happens with any vi with a sweep chart. I've used versions 6 through 7 for years and never seen this. I've only recently moved to a new job with a new machine and version 8.5.1., so I'm not sure what to try.
I've included a simple example.
Thanks much,
JSC321
Attachments:
Chart Sweep Scale Update Problem.vi ‏32 KB

You have a typical race condition!
There is no data dependency between the property node and the while loop, so in your case the loop starts executing first and the property node starts slightly later, immediately erasing the first point. Execution order is not defined.
All you need to do is add a data dependency, e.g. as with the error cluster in the image. This forces the property node to complete before the loop is allowed to start.
(Execution order is enforced even if the wire value is not even used inside the loop )
Try it!
Message Edited by altenbach on 12-23-2008 11:08 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
HistoryRace.png ‏10 KB

Extention Manager CC update problem

Similar Messages

Maybe you are looking for