External FW Drive as boot volume for Mini?

Has anyone tried this? If so, how's it working for ya?
r
http://www.budget-ha.com/index.php/content/view/22/1/

I just tried this out as I was curious about my Prolific FireWire enclosure that houses my HDD and I wanted to try the new Safari 2.0.1 to see if I'll put Tiger back on.
It works great on these boxes as well. The speedup is visually noticeable over the internal drive and I am please with Safari 2.0.1 lack of performance plagued issues so far.

Similar Messages

  • My mac mini quit recognizing the external hard drive i am using for time machine.

    I have an IOMEGA external hard drive hooked up to my mini for Time Machine.  It was working for about 4 months then quit.  The PC will not recognize the hard drive and I have switched usb cables and tried different ports to no avail.  Any help would be gladly appreciated!!

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

  • Can I install SuSE on an external hard drive and boot to that OS?

    Hi,
    I'd like to figure out and maybe even keep up with what a friend is doing with linux on a pc.
    Can I install SuSE 10.1 on an external Lacie hard drive and boot to that OS by holding down option during start-up?
    Thanks,
    Garrett

    Hi,
    I'm an OS X fan who was totally engrossed in the terminal a few years back but became side-tracked into structural and sculptural stuff instead of the computer.
    The Mac mini forum mentioned putting OS X on external hard drives to supe up the mini so it made me wonder about other Operating Systems.
    Now I'm mostly interested in being a little familiar with the SuSE OS because I heared the Chinese have adopted Linux; my impression is China and Europe are the cultural future and vanguard.
    U.S. is the only place on Earth using inches, farenheit, gallons, and pounds, for example. I'm anxious to use software that will come from Europe in the next year or two and China in the next four or five. Most American corps, except Apple, seem to have peaked, to me.
    I'm just curious as to what's out there. Anyplace not gone metric yet is SO yesterday. I'll feel way cool when I send my PC friend a screen shot of Linux on my Mac using the external Lacie hard drive instead of an internal partition.
    Garrett

  • Can I use USB external DVD Drive to boot up my G4?

    My G4 (PCI Graphics) internal drive DVD-ROM is not working, its dead. I want to replace it with an External USB or Firewire Lacie DVD Drive.
    According to Apple document http://docs.info.apple.com/article.html?artnum=58606, my computer cant boot up from Firewire devices. I think that means, I wont be able reinstall my Mac OS or install future systems or start my DiskWarrior from the CD. Using a external Firewire DVD Drive. Let me know if I am wrong?
    Can I use a USB external DVD Drive to boot up?
    G4 (PCI Graphics) 400 mhz, 488Mb Memory, 50GB, 9.2.2 & 10.3.9. USB 1.0 & Firewire 400 Ports
    G4 (PCI Graphics)   Mac OS X (10.3.9)  

    Hi, Harold -
    Bad news - your G4 (PCI) model can not boot to either a firewire drive nor to a USB drive.
    Although the G4 (PCI) models do have native firewire, they (and their cousins the B&W G3) are specifically exempted from firewire booting; there is no workaround for this -
    Article #58606 - FireWire Booting
    Relatedly, a G4 (PCI) machine can be the Host machine in a Firewire Target Disk Mode setup, but can not be the Target machine.
    Article #58583 - Firewire Target Disk Mode
    USB booting was introduced first on the G4 (AGP) model, and is not available on earlier Mac models -
    Article #58430 - USB Info and Benefits of Dual-Channel USB
    The only external drive your G4 (PCI) can be booted to is a SCSI drive - but that requires that the machine have an appropriate SCSI PCI card installed.
    Replacing the internal optical drive might be the best choice, particularly for ease of maintenance and OS installing in the future.

  • Help with using external hard drive to boot windows on PC

    Hi,
    I'm not sure if this is in the right place, so apologies in advance if not. I've looked around the internet for a good while now, and I haven't found anyone in my exact position.
    My PC's hard drive (running Windows 7) recently died; long story short, I am attempting to reinstall windows. The only other computer I have is this MacBook Pro, on which I have an .iso file of Windows 7. So I want to use my external hard drive (WD 500GB "MyBook") as a boot device so that I can install Windows onto my new internal hard drive.
    The problem I am having is that, well, nothing seems to be working. Every time I try to load the .iso onto my external hard drive and boot my PC with it, either a blank screen appears or it says "missing operating system".
    I have made sure that the BIOS is running the external hard drive as its boot priority.
    I have tried using Disk Utility to partition the external drive, then using 'Restore' to load the .iso onto the partition, to no avail.
    I have tried simply dropping the extracted .iso files onto the hard drive, this doesn't work.
    I have also tried changing the file system of the external hard drive using the 'Erase' feature (NTFS-3G (using an addon), FAT32, exFAT, all of the others), but I notice that whenever I use Restore after doing this, the file system seems to return to Mac OS Extended, which might be why it isn't booting up on my PC. Is there any way I can succesfully partition the external hard drive in a format that will allow Windows 7 to boot (such as NTFS?), and is Disk Utility even the right program to do this?
    If you want any more information from me, please let me know and I'll do my best to provide it - I'm not the most advanced mac user in the world, but I've spent days trying to fix this problem and nothing, no combination of anything, seems to work at all. So any help will be greatly appreciated!
    Thanks

    Here is a quick suggestion for you:
    Download Virtual Box (free PC Emulator for Mac) and install Windows 7 on your Mac (don't worry about activating it yet, as you don't need to keep it more than a few hours).  You can tell Virtual Box to use the ISO file as the DVD drive for your virtual Windows computer, so no need to burn a disk.
    Search Google for creating a bootable USB installer for Windows 7.  I found a link that gave good instructions on how to do this using DiskPart.
    Follow the instructions to make the bootable USB stick for installing Windows 7 using your virtual machine you created above.
    Use the USB stick to install Windows on your new PC.
    Remove the virtual Windows machine from your Mac.
    Remove Virtual Box from your Mac.
    I found a set of instructions and built an installable USB stick last night that worked great for installing Windows 7 Pro (64 bit) onto my older ThinkPad I had sitting at home.  The USB installer also installs in about half the time as a DVD install.  The only reason I have you create the virtual Windows PC is that all of the instructions for makeing the Windows install USB stick are written assuming that you already have access to a running Windows PC.  By doing this install, you have up to 3 days before you would need to activate it and you can build the installer USB stick and remove teh virtual computer long before that.

  • I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    I converted from a PC to a Mac Mini.  I have my PC documents backed up on a DVD disk.  I have an external DVD drive connected to the Mac Mini.  I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

    Hi Joe,
    Thanks for your quick response.  I should add....it worked before.  When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac.  Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed.  I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD.  SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously.  I do not remember changing any settings since then. 
    When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc.  The problem is my DVD is all miscellaneious files/documents.  I just want to be able to see them in the finder.  I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents.  Again, I was able to open them previously and the DVD is not corrupted in any way.  
    Any additional advice? 
    Thank you!

  • Can you unplug the external hard drive you are using for time machine

    can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

  • I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant.  The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

    I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant.  I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

    I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion   Start up assistant wouldn't see my extrnal drive with the Time Machine files on it.  After many tries, I skipped the restore there and let the system boot.  I could see my external drive from Finder and the files looked OK.  I was told to use Migration Assistant and it had the same problem.
    I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD.  I went ahead and told it to continue and it started to restore my apps, settings, and documents.  It's been going for a couple of hours, and is close to being done.  I expect to see my old system restored when it is finished.
    Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
    It's been a month or so since your post  Did your get it to work?

  • Mini doesn't always connect  bluetooth and external (USB) drives on boot

    I have had a new Intel mini for 4 months now (we also have a PPC G5, which we love). In the last few weeks the mini started to not connect my Bluetooth keyboard and mouse, nor recognize some of my USB peripherals when booting up. When this happens, it also makes a repeated "startup sound - bong!" echo when the start button is pressed. I have two external USB drives, one 500GB Phantom and one 500GB WD MyBook. When the Apple logo appears at boot, I can see the activity lights flashing on the drives as the BIOS interrogates the USB connections, but after the Leopard start up desktop appears, the only drive shown is Macintosh HD, the mouse pointer is at the top left of the display and will not move, nor will the keyboard do anything. I have read every post on this subject and tried all of the resets suggested. Sometimes this works after a few attempts, sometimes it takes 6 or more tries - disconnecting all cables, and turning the computer on again and again. Occasionally the WD MyBook drive appears on the desktop, yet still the Bluetooth is unresponsive and the other drive absent. I am getting frustrated having to disconnect everything and trying to boot this thing up, sometimes for one hour or longer before I can use it properly (all of my work is on the external drives).
    There MUST be a firmware update for this by now, because I see that I am not the only one experiencing these problems, and this is obviously some problem with how the BIOS is communicating with the bus.

    Hi amyta pdx-
    I'd be careful jumping to conclusions or the troubleshooting process may get clouded. For one thing those WD drives are junk and most people using them eventually have problems.
    What happens with everything disconnected from the Mac except a mouse connected to a USB port on the Mac and the monitor connected to the video port only?
    Luck-
    -DP

  • Mount external hard drive on boot

    I have a Mac mini run on SL, I want to set it up as a samba server with a external hard drive which formatted in NFS format.
    I tried to write a plist in LaunchDaemons to call a script to mount the hard drive, but it does not work.
    Here is my plist
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.kg.mount</string>
    <key>RunAtLoad</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/System/Library/script/com.kg.mount</string>
    </array>
    </dict>
    </plist>
    It get loaded at the start, if I user command 'launchctl list', I can see the service is loaded, but the disk is not mounted. If I run the plist manually after boot, the disk will be mounted.
    Does somebody know how to mount a disk at boot time?
    Thanks

    The OS automatically mounts storage devices when they come online. If that doesn't happen, you need to fix the problem.
    First back up the disk, if you haven't already done that.
    Get rid of the script and the launchd item. Unload it first -- I assume you know how to do that.
    Launch Disk Utility and select the "EX" volume, then run "Repair Disk." If any errors are reported, repeat until there are no more.
    If the disk is now mounted, unmount it. Check the /Volumes directory for any empty subdirectories named "EX", "EX-1", or some such. If present, delete them.
    Unplug the drive, then plug it in again. If it still doesn't mount, plug it into a different port (if it's USB.) If it still doesn't mount, try it on a different Mac.

  • External hard drive not visible on Mac Mini

    I just purchased a Mini with Lion.  The Seagate Freeagent external hard drive is visible from finder on the Mini but it is "read only" and it is not visible on the wireless network to my macbook.  How can I make the external hard drive read write and make it visible on the network?

    OS X can read an NTFS formatted drive, but not write to it.
    Sharing drives | Utilities - Page 1 | Macworld
    If you want to use the drive for sharing files between Window's and Mac's, then MS-DOS / FAT-32 works fine, except that it has a 4GB single file size limit.
    If you are going to use the drive exclusively with your Intel Mac's for sharing, backup and booting, then use GUID Partition Table / Mac OS Extended (Journaled) for the Partition Scheme and Format.
    Format a Drive to Boot Intel Macs | Tips | The Mac Observer

  • Buying a new iMac - can you use an external SSD drive as boot drive?

    Here is the question: Can you attach an external SSD and use that as your boot drive accompanying an iMac? This way all the Apple warranties stay valid but I am not saddled with the expense of the Apple installed SSD price?
    Now for some background ...
    I am looking to buy a new iMac replacing my loved but woefully underpowered Mac Mini. In a perfect world I would like the following set-up based on how today's iMacs can be configured:
    Processor: 3.4GHz Quad-Core Intel Core i7
    Memory: 16GB 1333MHz DDR3 SDRAM - 4x4GB
    Hard Drive: 1TB Serial ATA Drive + 256GB Solid State Drive
    Graphics: AMD Radeon HD 6970M 2GB GDDR5
    Optical Drive: 8x double-layer SuperDrive
    The problem is I'd rather not spend $3200+. I would imagine most people plug something similar in and then begin to ID must vs. nice to haves. So, here are my must haves:
    Memory: Minimum 16GB 1333MHz DDR3 SDRAM - 4x4GB (I was thinking of starting with minimum and then purchase the right RAM and installing myself)
    Graphics: AMD Radeon HD 1GB
    Hard Drive: 256GB Solid State Drive
    I like to work the graphics side and have a media library of almost 1TB (uploading, downloading, converting, editing, etc.). With my existing setup I have 3+TB of external storage but again, am suffering massively in the horsepower department as it takes hours for me to do what I believe a new iMac can help me accomplish in a fraction of that time. This is not my profession so while I looked at the towers I still need this computer to serve as a family computer as well. Appreciate your thoughts and feedback.
    Cheers,
    -Jim

    Ok this is great as we are progressing through. 
    So yes it can be done but there's the caveat of the "pipes" once you go external.  The only option for an external SSD Drive with thunderbolt that I know of is LaCie's 240 GB version ... Priced at $800.
    I think what I will need to do is suck it up.  The new MacBooks have the core technology I'd like but we really want the larger screen.
    Last question - should I wait/when might we expect an updated line of iMacs? In a few months or not for a while? That answer may provide some direction if it is anticipated to be sooner vs later.
    Thank you!

  • Can I make an external Hard Drive my boot drive

    My internal hard drive is about to die, it is making strange grunging noises and the computer is taking up to 30 minutes to boot up. The internal disk is the original 10GB disk with 9.7GB on it.
    I constantly get boot disk nearly full warnings. So I bought a Western Digital My Book 2, Home Edition 500GB Firewire Drive. I connected it up and it appeared on my desktop. Being a bit of a div, I tried to drag my old hard disk onto the new one but that failed (obviously). I now need to get everything off my old hard disk and onto my new firewire disk and then make sure that the computer boots up from that one. How can I achieve this, should I install the OS (OS X 10.4.11) on the new disk and then copy over the files, and applications? Or would it be better to "find a way of cloning my drive onto the new disk.
    More questions...do I need to make partitions on the new disk (I don't know what these are I'm afraid)
    When I have set up the new drive as a boot disk, can I just unplug the old internel disk?
    Grateful thanks to anyone who can assist thiscomputer illiterate technophobe.
    Allen

    Is it dangerous to use an external HD to boot from? The guy at Circuit City told me it was.
    One danger of using an external hard drive as a boot drive, is the connection is not as reliable as an internal hard drive. The other is the mistaken assumption that just because it is separate, or not part of the computer, that it is safe. The only true safety comes in numbers. You should always backup your data*:
    http://www.macmaps.com/backup.html
    2.5" hard drives are a little less reliable than 3.5" hard drives because of the smaller parts involved. Mac Minis have 2.5" hard drives, whereas other desktop Macs have 3.5" hard drives. Whether the reliability of Firewire or USB over SATA or Parallel ATA on 2.5" is enough to offset this difference is hard to say. Having enough backups ensures you don't have to be surprised when you find out in your situation.
    - * Links to my pages may give me compensation.

  • Adding external hard drive to airport extreme for time machine error

    Hello,
    I recently bought an airport extreme that I wanted to combine with an external hard drive in order to do wireless time machine backups.  I hooked this up and the hard drive shows up in the devices menu.
    However, when time machine starts to backup, I get the following error:
    "The backup disk image “/Volumes/Blackmer External MyBook/Benjamin Crispell Blackmer’s MacBook Pro.sparsebundle” could not be created (error 1)."
    When my computer is connected directly to the hard drive, it works fine.
    Any ideas on how to fix this?
    Thank you.

    It is important to understand that Apple does not support Time Machine backups to a drive at the USB port of the AirPort Extreme.  So, that may be an issue here.
    Despite this, users try it anyway. Some appear to be successful for a time, some partially successful, some can't get it to work at all.
    Even if it does appear to work initially, corruption issues may occur down the line without warning. Having tried this myself as a test a few times, I can attest to that.
    If you want to try this anyway, the two important things to check are.....
    The drive must be formatted in Mac OS Extended (Journaled). Other formats will not work
    You almost always need to use a powered USB hub...even if the hard drive has its own power supply....because the USB port is under powered on the AirPort Extreme
    You might also want to consider a secondary backup plan to protect your important files

  • Best external hard drive as back up for time capsule

    What is the most reliable external hard drive out there for use with time capsule/time machine? I have a 500GB version of time machine and it's full. I don't want to have to buy another one. The hard drives I've seen come with some pretty bad reviews.

    Most any drive will work with Macs, and Time Machine.
    Most drives come formatted for Windoze, but most of them can be re-formatted on your Mac to work with it. See item #5 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
    Also note item #1 there for size considerations; and items #3 and/or 4 for using with other data and/or other Macs.
    If you think you ever might want to put a "bootable clone" on it, be sure it's a bootable drive. Most PPC Macs can boot only from FireWire; most Intels can boot from F/W or USB. But some Western Digitals won't boot a Mac. Their list of which ones should and +should not+ boot: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1787. But note the disclaimer that they don't support it +*at all.+*.
    In addition, many of them have a built-in sleep mode that cannot be disabled, and sometimes interferes with Time Machine backups: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?pfaqid=1376
    Depending on what ports you have, FireWire 800 is by far the fastest; FireWire 400 next, and USB slowest (F/W 400 and USB 2.0 are rated about the same for short bursts, but F/W is faster for sustained transfers. Also, your Mac's CPU has to do more of the work with USB, so actual throughput is usually less).
    Many folks think USB is less reliable than FireWire. If you do get USB, be sure to connect it to a port on your Mac, not a keyboard (that may be only USB 1.0). Try to avoid hubs, too.
    If you're using USB, it's usually best to get a drive with it's own power supply, as taking power from your Mac can be a marginal proposition. Portable FireWire drives without separate power supplies don't seem to have this problem.
    Take any advice for or against particular makes or models with a grain of salt: all makers (of just about anything) can have a "run" of bad components, or a relatively few early failures. Plus, by the time any really good trends are noted, the model has probably been revised or replaced anyway!

Maybe you are looking for