Extra photo pages with out extra headers

Big Time Newb here,
I am looking to add extra photo pages as I like the template format and want them all to be under one category name in the header. For example the header might read "My Week" and then have sperate pages listed for Monday, Tuesday, Wednesday etc.
Any words of wisdom will be greatly appreciated.
Cheers.

Welcome to the Apple Discussions. Create your Week page using the My Albums page like Wyodor suggested then can drag an iPhoto album onto the page from the Media/Photo pane in iWeb, one album for each day of the week. Set up the albums beforehand in iPhoto and name them for the week days. That way only the week page will be displayed in the navbar.
OT

Similar Messages

Problem publishing Photo page with iWeb 08

Hello,
I have a problem when publishing photo pages with iWeb 08. Upload starts and then I get the error message that iWeb encountered a problem while publishing. The funny thing is that I can see
the photo page in Safari. The only problem is that when starting the slide show I can not see the
forward/backward buttons. Publishing a photo page with iWeb from a .me web photo gallery works without any error message, but still when starting the slideshow the navigation buttons are not displayed. Actually if you click on the place where the navigation buttons are supposed to be,
you can go picture forward/backward. Any idea ?

I am having the same issue, except I do not get any error messages when publishing to a folder. Clicking on the "index" file within the folder will open the photo page in both Safari and Firefox. Everything functions as designed except no forward/backward/pause buttons are visible below the slideshow. There are text box outlines with a question mark where these buttons are supposed to be located, and I can pause, advance or reverse slides. Eventually these question mark outlines disappear and stay disappeared.
The end result is there are no intuitive graphic indicators on the slide show to even suggest to the viewer that he/she has some control over the presentation. I don't believe I can add explanatory text boxes to the slide show to compensate for the missing icons. This lack of visible control elements in the slide show is a huge issue. I am reasonable sure the problem does not reside within my computer. I've also reviewed inspector control options for a photo page/slide show and haven't gotten any combination of check boxes to make a difference.
I'm beginning to think this may be an unexpected conflict that was contained within a recent software update. It might well be worth a close look at programming code by Apple technicians. In the meantime, can anyone offer a clue as to what might be going on?

Hp 1050 cannot print the photo, document with out border

Cannot print the photo, document with out border, have any solution for border less printing use hp 1050?

Hello 25bijoy, and welcome to the HP Forums.
I see you are looking into borderless printing. Unfortunately, this printer does not support borderless printing. You can find more information here in the HP Deskjet 1050 All-in-One series User Guide.
Please let me know if you have any questions. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How do I create photo page with blow up images on click?

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMeGallery info page at Apple.
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle...

How do I create photo page with blow up images?

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMe Gallery info page.
http://www.apple.com/ilife/iphoto/#mobilemegallery
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I think this post mentions what I'm trying to do, but they seem to be having problems getting it to work. I need help creating this effect from scratch.
http://discussions.apple.com/thread.jspa?threadID=1609046
I'm using a fairly new MacBook with OS 10.5, iPhoto and iWeb '08. I also have Aperture 2.0. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

Cyclosaurus--
That's the effect that I'm looking for. I've read through the instructions on Cabel's website (thanks for the great links!) But I'm afraid I'm still a bit of a novice with website creation and editing. I liked your iWeb examples, so I have a few follow-up questions about how to integrate this with iWeb.
1) Do you use iWeb and .Mac/MobileMe to publish your site? I already own a domain and have been using google's online page creator tools to create some very basic pages. For picture pages, I just put up links to my Picasa web albums. But the google user interface and options (no FTP upload) are even more limited than iWeb and .Mac. With 20GB of storage, plus the other features and ability for integration, MobileMe sounds enticing for the price.
2) At what point do you add the code to the pages in the edit and publish process? What are the exact steps you use to publish? (Create and edit in iWeb, add html code, publish to folder or publish straight to .Mac/MobileMe, etc.)
3) If you make changes to pages in iWeb, do you have to keep adding the code to the pages and repeat the steps from above question?
4) What app do you use to edit the html code? No html edit function in iWeb, so I tried opening the "page.html" files in TextEdit but the page just looked like a web page. No code. How do I get the text of the html code to open in TextEdit or another app?
5) Do the lines of code (2 lines in "head" and 1 line in "body") need to be added to every page that I want to use the effect?
6) How do you upload the two FancyZoom folders to a .Mac/MobileMe account site? And where exactly do they need to be placed?
Thanks,
TDizzle...

Photo Page with lots of pix - any way to jump to the last page?

I have a photo album with 112 pix in it, and it's set to display 21 photos per page w/ 3 columns. This makes for a total of 6 pages.
The way the page navigation shows up, at least in Safari, is as follows:
< 1 2 3 4 >
Oddly, in iWeb it shows:
< 1 2 3 4 5>
I continually am adding photos to this album, but I think that people may not realize that there are more than 4 pages. The only clue is that the right arrow is not grayed out, which is too subtle.
If you click on the "4", and then click the right arrow, it now displays 1-5 like in iWeb. Clicking on it one more time then displays 2-6.
If all of the pages can't be displayed for space reasons, some indication of how many pages total would be helpful, and/or a "last" link to jump to the last page.
On this discussions site, for example, doing a search with multiple pages of results brings up the following:
Pages: 12 *| 1 2 3 4 5 6 7 8 9 10 | Next |*
This makes it obvious how much content there is, and how far you have to go to get to the end. Is there any way to get something similar on an iWeb page? I think people are missing my latest additions because they don't know they're there, and there's no easy way to get to the newest stuff.
Thanks!

I couldn't get the other "jump to the last page" script to work at all; it winds up screwing up the display to where it shows two pages at a time slightly offset from one another.
It's more likely that you web host servers take time to serve the page and its element, I ran into similar problem while helping out another person in this forum.
But, while I'm finally seeing the page count directly above the page navigation numbers, it's indicating that there are 7 pages when in fact there are 8, and I'm wondering why it disappears after changing to any other page (it doesn't reappear even on the first page without doing a refresh). I've tried this with the same results in Safari 3.1.2 & Firefox 3.01.
My bad, all these computing have concept of zero , I messed up with that
I also found that the bottom paginate navigation cause problem, so I added more code to handle that.
The result may not be desired but cause the page count flashed when you go from one page to the next, quite annoying. Give this a try:
<script type='text/javascript'>
var headerControlsWidget;
var footerControlsWidget;
function setPageCount() {
try {
headerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-headercontrols')[ 0].widget;
if (headerControlsWidget) {
footerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-footercontrols')[ 0].widget;
entriesPerPage = headerControlsWidget.preferences.entriesPerPage;
entriesCount = headerControlsWidget.preferences.entryCount;
pageCount = parseInt(entriesCount/entriesPerPage) + 1; // adjust to true count, if needed;
newDiv = parent.document.createElement('div');
newDiv.id = 'pageCount';
newDiv.innerHTML = 'Pages: ' + pageCount;
if (!(parent.document.getElementById('pageCount'))) {
paginateDiv = parent.document.getElementById(headerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.insertBefore(newDiv, paginateDiv.firstChild);
} catch(e) {}
function initPageCount() {
setPageCount();
headerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-headercontrols')[ 0].widget;
paginateDiv = parent.document.getElementById(headerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.addEventListener('click', function() {setTimeout('setPageCount()', 250);});
footerControlsWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-footercontrols')[ 0].widget;
paginateDiv = parent.document.getElementById(footerControlsWidget.instanceID + '-pagination_controls')
paginateDiv.addEventListener('click', function() {setTimeout('setPageCount()', 250);});
clearInterval(chkHdrCntl);
chkHdrCntl = setInterval('initPageCount()', 500);
</script>

Photo Page with widened page size

I recently enlarged the size of my web pages using the inspector so that the layout is more landscape (like a monitor) than portrait. When editing a photo page to fit the wider area (1240 pixels wide) it lays out fine in iWeb, however when I publish it to the web all the pictures only stay within the 700 pixels area and then things overlap and get screwy from there. Also note that I am NOT using a dot mac account. Here is an example of the problem:
http://bobbydg.net/BOBBYDG.NET/Amnesia.html
Any help would be appreciated. Thanx.

No, I tried reloading the page, that wasn't it. Can you send me the link to your page where you did it. Did you see my page? Again it looks perfect in iWeb and once you click on a pic and get into the viewer it is full screen.

Welcome page with out any password pop up

Hi All,
I have one req. that we have to make one BSP page in page with flow logic. And that page should not ask for any user id and password. Can you please help me out?
Thanks and regards,
Kuldeep Verma

Hello Kuldeep,
If the BSP application contains the Welcome page as well as other pages, you can achieve the goal through dividing the application into two parts: public part and protected part.
For example, for the Welcome page, you can create a page with name "public/welcome.htm", and for other pages that must be accessed with user authorization, you may create each page with name "protected/xxxx.htm".
In addition to the above, you need to create two independent services under SICF relevant node for the BSP application. As in example, one independent service is named "public", and the other is named "protected". For "public" serive, you need to specify a user that has limited rights; for "protected" service, you do not need to specify any users.
Please reward points if helpful!
Best regards!
Gordon

On our mac I am finding sometimes while on line in safari that while reading a page it will "back" to the previous page with out me doing or touching anything. Is there anyreason for this or how can I stop it from happening?

When using safari the page will "back" with out touching the keyboard meaning that I am logged out of some online programmes. Does anyoine know why this would happen or what I can do to stop it??
Susan

su5ie wrote:
Dont know what OS means
Mac OS X version 10.6.8. Is that what you mean?
You got it. OS = operating system.
safari is the internet browser on the computer? It doesnt matter what Im doing it just randomly does it more recently it has been while the kids have been doing their online maths. They would be answering a question and then it would sign them out and go back to the home page?? Weird??
Yes, Safari is the Internet browser. Click on a Safari page, go to the upper, left-hand corner, click on Safari, select About Safari, and post the information. On my Snow Leopard machine, I'm running Version 5.0.5 (6533.21.1).

My user group photo changed with out my authorization

I went to log onto my computer and noticed that the photo of myself which come up on the screen when i type my password in had changed to a picture of an animal. How did this happen with out my authorisation?

Some one may have access to your MBP. I suggest that you change your password.
Ciao.

How do I add a section in the latest pages with out it appending to the end of the document

Hello to all. I'm trying to figure out how to add a section between pages 14 and 15 in my document, but when I do this it adds a section brake between the last page of said document which is around page 31 or so. I want to remove a whole section and this seems to be the only way to do this.
I'm running osx10 Yosemite with pages 5.9. Any help here?
Take care.

In TestStand 2012, the ReportHeader string no longer contains a <body> tag, so you can directly append the extra HTML to the parameter without needing to do a search and replace. The following expression worked in my case:
Parameters.ReportHeader = "\R\N<IMG src=\"C:\\NI.JPG\" ALT=\"NATIONAL INSTRUMENTS\">" + Parameters.ReportHeader
Al B.
Staff Software Engineer - TestStand
CTA/CLD

Need to restrict the form into one page with out second page in SAP Script

Hello Friends,
I have a query in SAP script form, I had created one form for confirmation request for FI, i had copied the standard form F130_CONFIRM_01 and made the changes as per the requirements and checked in f.17 which was perfect. I had removed all the lines except wherever the changes i had made in the form.
Here iam getting one problem, when iam printing the confirmation request it should give me in one page but here iam getting two pages of which one page iam getting the complete information and the second page iam getting the empty page.
It should not give the second page. i also checked by giving the condition if &page& eq 1 but no difference iam getting two pages.
Pl. let me know how to solve this problem since this is very very emergency issue.

Hi Mark,
If i am not wrong is this Tcode for customer/vendor balance confirmation? In the standard script that u mentioned, the first page id the letter, and the second page contains the balance sheet.You would not be able to restrict the blank pages from coming, coz there are in all three scripts configured for the TCode F.17, so the blank pages are bound to come, even if the conditions for pages are maintained. I have faced similar problems in my development too....
Thanks & Regards
Nayan
SAP Consulatant.
Reward with points if useful

How do I create a form with text fields that can continue to multiple pages with out it over lapping

I have created a form in Livecycle and have made every object a sub field. But I am still having the same probably. The text field only continues on to a second page and overlaps the footer I have created at the bottom of the page. I am new to livecycle and have tried a lot of different things to fix this problem. Help would be greatly appreciated.

Hi,
I've found this blog http://blogs.uoregon.edu/developments/2010/12/29/pdf-making-text-fields-grow-to-accommodat e-text/ and this example file : flowableTest.pdf? Is it close to what you search? I cannot go deeper into example now, but will.

BASED ON SYSTEM LOGIN HOW TO ASSIGN SHARE POINT PAGE WITH OUT HAVING GROUP PERMISSION FOR THAT USER?

Hi All,
I am Srinivas,
How can i give permissions to Active Directory login User in SharePoint 2010. But user not in a group member of SharePoint site. is there any chance to assign a
particular page to Active Directory user (He is not a member in SharePoint Group).
Thank You
Srinivas

He doesn't need to be a member of a SharePoint Group. You can create a SharePoint User based on the AD user and assign permissions to that user.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Can a Photo page be used as thumbnail links to movie pages?

I've made a photo page with say 20 or so photo thumbnails. I have made separate movie pages for each movie. Dragged each movie page link to the related picture on the photo page and sized the button to be the same size as the thumbnail image. Checked that the button is linking to the correct movie page.
In iWeb, when I "make links active", everything works properly. But once it's uploaded, the thumbnails/buttons, when clicked, open up a new browser window with just the jpg thumbnail.
Any ideas to get this to work? Or do I have to start over, and lay it all out maually?
G5 DP 1.8 & PowerBook G4 15" Mac OS X (10.4.6)

I think the problem may be related to the Photo page template. When you click on the thumbnail, I think there is some built-in functionality to open a new slideshow window or something.
Instead of using the Photo gallery template, try using a plain page...one of the templates with as few elements as possible...maybe the movie template. Then manually add your movie thumbnails and size them to your liking. then add the hyperlinks to your movie pages to each thumbnail. I think you might find that this works better.
==> www.DirtDoog.com <==</a>
Place A Virtual Pin On Putt-Putt's GuestMap!

Extra photo pages with out extra headers

Similar Messages

Maybe you are looking for