Extremely URGENT! How to pass a parameter from html to form?

Hi Guys,
I want to be able to pass a parameter to a Pre-Query trigger (from a html page to an Oracle form.) Right now, I hard coded the Pre-Query trigger
(i.e. set_block_property('datablock_name', default_where, 'tableName.fieldName = '||:datablock.field)
I want to be able to assign a value to the above datablock.field from an URL (i.e. something like http://localhost/dev60cgi/ifcgi60.exe?form=MODULE1.fmx&userid=&otherparams=fieldx=parameterSample
Does anyone know how to set that up within Oracle Forms. Thanks in advance.

Hello. your you can create one it paginates similar to this...
<HEAD></HEAD>
<BODY >

<OBJECT classid="clsid:86ecb6a0-400a-11d5-b638-00c04faedb18" codebase="/jinitiator/jinit.exe#Version=1,1,8,11" WIDTH="950" HEIGHT="560" HSPACE="0" VSPACE="0">
<PARAM NAME="TYPE" VALUE="application/x-jinit-applet;version=1.1.8.11">
<PARAM NAME="CODEBASE" VALUE="/forms60java/">
<PARAM NAME="CODE" VALUE="oracle.forms.engine.Main" >
<PARAM NAME="ARCHIVE" VALUE="f60all_jinit.jar, ComponentesEsigfa.jar" >
<PARAM NAME="serverPort" VALUE="9000">
<PARAM NAME="serverHost" VALUE="MyServer">
<PARAM NAME="serverURL" VALUE="/servlet/oracle.forms.servlet.ListenerServlet?ifcfs=/servlet/f60servlet?config=servlet&form=fca_menu.fmx&otherparams=ejercicio=<%=request.getParameter("ejercicio")%>&useSDI=yes&lookAndFeel=generic&colorSchema=teal">
<PARAM NAME="connectMode" VALUE="HTTP">
<PARAM NAME="serverArgs"
VALUE="module=fca_menu.fmx userid=<%= request.getParameter("login")+"/"+request.getParameter("pwd")+ "@" +request.getParameter("base")%> ejercicio=<%=request.getParameter("ejercicio")%>">
<PARAM NAME="separateFrame" VALUE="false">
<PARAM NAME="splashScreen" VALUE="no">
<PARAM NAME="backgroun[i]Long postings are being truncated to ~1 kB at this time.

Similar Messages

How to pass query parameter from HTML in SAP XMII

I need to pass the value to query parameter from html .i m quite confused about how to do that .can anyone give me a valid point....

Ramesh,
Addition of Rupesh,
U can also pass in the form of INLINE paramters.
Like
<Applet name = <appletname> width .......>
<param NAME = "param.1" VALUE = <value>
<param NAME= "param.2" VALUE = " <value>
</APPLET>
Thanks
Hari

How to pass a parameter from one action1 in block1 to action2 in block2.

Dear Experts,
How to pass a parameter from one action1 in block1 to action2 in block2.
My Process Structure is as follows..
       Process
            Sequential Block
                 Action 1
                 Parallel Dynamic Block
                         Sequential Sub Block
                         Action 2.
while i am trying to execute the action1 the following error is shown below:
Cannot complete action: The activity could not be read.
Please suggest me how to do?
Regards,
Rajesh N

Hello Rajesh!
I think you are talk about the mapping parameters of your process.
This case in design time of your workflow, you have the vision of your blocks and actions, you have on action 1 the output parameter and you have the action 2 an input parameter.
So you have that make a group mapping on your process, map in this group the action1 outpu parameter with the action2 input parameter.
Regards, Ronaldo Rampelotti

Pass data parameter from URL to Forms

Hi
Is it possible to pass a data parameter from asp to Forms?.
In my asp I have a url to call a form (eg. http://servername:port/forms90/f90servlet/form=testform.fmx). In my testform.fmx I accept 'account no' as a parameter for querying the records. Since I am calling this form from asp, I already have the account no in my asp. I would like to pass this account no to the form automatically.
Is it possible to pass this data parameter from url to forms?.
If possible, what changes to be made in the form. Please help.
sreekumar

Create a parameter in your form, there's a node for it in the Navigator window. Imagine it is called myParam.
Pass it on the URL like this:
http://host/forms90/f90servlet?config=myApp&otherParams=myParam=somevalue
Regards,
Robin Zimmermann
Forms Product Management

How to pass date parameter from one page to other in BSP application

Hello gurus,
In my BSP application i have taken an input field and made its type "date" and its value also of type date and have set showhelp .
Now once a particular date is given as an input i want to pass its value to next page. And in next page i have to fire a query based on the date entered in previous page...
Now my prb is that my date value is not getting passed to the next page.
I have used
navigation->set_parameter( name = 'BEGDA' value = BEGDA ).
to pass date parameter.....still parameter is not getting passed.
plz help me with this.....
thankx.....

Hi Eddy,
By truncation i mean the entire date becomes 10 char including the ' . ' eg(06.12.2006).
so with begda being 8chars it takes my date as 06.12.200
as a result my query is not getting executed.
now i have tried to use a FM 'CONVERT_DATE_TO_INTERN_FORMAT'.
in my 1st page but still in 2nd page its giving me following error.
<b>The data that was read could not be written to the specified target field during a SELECT access. Either the conversion is not supported for the type of the target field, or the target field is too short to accept the value, or the data is not in the appropriateformat for the target field.
</b>
Regards
Swati

How to pass a variable from HTML to Flash

I have built my flash ad banner in Flash 9 and now want the
HTML code to pass the url over to the flash movie that it should
jump to when clicked.
The info in the help file seems out of date for the latest
HTML template as it uses mainly JavaScript to get round IE's
dreadful embeding issue. So my problem is, how do I pass a variable
from the HTML to the actionScript specified int he Help file
(running on a full screen button) as shown below?
myButton_btn.onRelease = function() {
if (clickTAG.substr(0, 5) == "http:") {
getURL(clickTAG);
via the html code now used by Flash 9 which is like this:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Advert_long</title>
<script language="javascript"> AC_FL_RunContent = 0;
</script>
<script language="javascript"> DetectFlashVer = 0;
</script>
<script src="AC_RunActiveContent.js"
language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">



<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not support
scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Adobe Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
</body>
</html>

You should use SWFObject to embed your Flash. Not only does
it make
embedding more straightforward, it makes passing query
parameters very easy.
Check out:
http://code.google.com/p/swfobject/
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

How to pass a variable from HTML to Flash 9

I have built my flash ad banner in Flash 9 and now want the
HTML code to pass the url over to the flash movie that it should
jump to when clicked.
The info in the help file seems out of date for the latest
HTML template as it uses mainly JavaScript to get round IE's
dreadful embeding issue. So my problem is, how do I pass a variable
from the HTML to the actionScript specified int he Help file
(running on a full screen button) as shown below?
myButton_btn.onRelease = function() {
if (clickTAG.substr(0, 5) == "http:") {
getURL(clickTAG);
via the html code now used by Flash 9 which is like this:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Advert_long</title>
<script language="javascript"> AC_FL_RunContent = 0;
</script>
<script language="javascript"> DetectFlashVer = 0;
</script>
<script src="AC_RunActiveContent.js"
language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">



<script language="JavaScript" type="text/javascript">

</script>
<noscript>
// Provide alternate content for browsers that do not
support scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content
requires the Adobe Flash Player.
<a href="
http://www.macromedia.com/go/getflash/">Get
Flash</a>
</noscript>
</body>
</html>

You should use SWFObject to embed your Flash. Not only does
it make
embedding more straightforward, it makes passing query
parameters very easy.
Check out:
http://code.google.com/p/swfobject/
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

How to pass a parameter from a report to multiple forms in the same page

Hi:
i have a report and a lot of forms in the same page. The fact is that i want to stablish a link over a filed in the report which would make some information appear in those forms so that information could be updated. For example: i have a report with company names. Over those names i want to put a link. When the link would be pressed the forms would reflect the information about that comany. Is this possible to be done? how can i do this or something similar?
Thanks.
Regards. Urko.

Please see post Re: session state security
It has been done for a single form in a page and can be extended to multiple forms as well.

How to pass a parameter with more than one value to a report? (urgent)

Hi, all
I try to pass a parameter from a search form to a report in
which I would like to print out my search result. My problem is
I can pass the parameter to report but only one value which my
cursor points to. could anyone tell me how to pass a list of
value to the report? my trigger in form like this:
declare
PL_ID PARAMLIST;
sc_no books.c_no%type;
begin
PL_ID := GET_PARAMETER_LIST('parametername');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('parametername');
IF ID_NULL(PL_ID) THEN
MESSAGE('PL/SQL held against Button failed to execute');
RAISE FORM_TRIGGER_FAILURE;
END IF;
ADD_PARAMETER(PL_ID, 'PARAMFORM', TEXT_PARAMETER,'NO');
sc_no := :searchlist.c_no; --(c_no is the value I want to pass
but not only one.)
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
RUN_PRODUCT(REPORTS, 'reportpathname.rep', SYNCHRONOUS, RUNTIME,
FILESYSTEM, PL_ID, NULL);
end;
Thank you in advance
Diana

Is it your values in parameter NO separated by coma? And is it
parameter in where clause?
Do you want something like :
from table
where s_no in (NO) ?
If is answer "yes" you can create lexical parameter in report.
You can write in report sowething like:
select a.field1, a.field2,.....
from table a
&COND /* this is if is condition only one line after "from".
if you have more lien after where then you will put this &COND
in line where you want to have your multivalue.
Then in your trigger in form you should write:
sc_no := 'where a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
/* again this is if you have only one line with WHERE ili
conditions */
or you will write:
sc_no := 'and a.sc_no in ('||:searchlist.c_no||')';
ADD_PARAMETER(PL_ID, 'pamametername', TEXT_PARAMETER, sc_no);
It will substitute line in which is your conditions with
multivalue.

Pass a parameter from webi to Xcelsius

Hi all,
Anybody knows how to pass a parameter from a webi report to Xcelsius via URL?
I need to refresh the Xcelsius data with a parameter coming from the webi report. With Live Office works but only the first time: the data is not being refreshed in Xcelsius everytime I change the parameter in the webi report.
I'm thinking in someting like openDocument.jsp but how do I read this parameter in Xcelsius? Which connection should I use?
Thank you very much,
jon

Hi Peter,
the link provided refers to Xcelsius V4.5.
In Xcelsius 2008 you have to control Flash Vars in the Data Manager.
Go to the Data Manager, Add the Flash-Var Connection Type, Select CSV-FlashVar and define a name and a range.
But i am not sure if Xcelsius Engage can handle FlashVars, because i am only working with Enterprise.
Please take a look at your manual.
For sure there are other ways to import data during runtime. Take a Look at the Connections provided by Data Manager. (e.g. QaaWS, SSRS, LiveOffice, Webservices, ...)
Also take a look at the link below. It might be another nice option for "pseudo" data connectivity
http://labs.businessobjects.com/xcelsiuspublishing/default.asp
Best Regards
Ulrich

Hw to pass parameter from report to forms

Dear Friends,
I m working on Forms n Reports 6i,
I m running report n passing parameter from the forms now the requirement is that if report run successfully it shuld give the msg otherwise give an user define error msg.
Hw do i pass any parameter from report to form for acknowledgment.
Thanking yours
Chandan

Hi Rajat,
using run_product built in i can pass parameter from forms to reports but hw can i get some parameter value from reports to forms as mentioned earlier my post
Thanking Yours,
Chandan

Pass Checkbox Parameters from HTML Form to a stored procedure

I'm still looking for a solution to my forms problem. FYI, I'm not using Applications Express to build my application--I'm using straight PL/SQL. I need to know how to pass checkbox parameters from my Web form. I'm allowing folks to select one or more checkboxes on a form that will call a delete function to delete the selected records. What I read in Oracle's "Database Application Developer's Guide - Fundamentals" isn't helpful to me. If someone would point me to some examples, maybe I could see what I'm doing wrong. Here's what was written in "Database Application Developer's Guide - Fundamentals":
All the checkboxes with the same NAME attribute make up a checkbox group. If none of the checkboxes in a group is checked, the stored procedure receives a null value for the corresponding parameter.
If one checkbox in a group is checked, the stored procedure receives a single VARCHAR2 parameter.
If more than one checkbox in a group is checked, the stored procedure receives a parameter with the PL/SQL type TABLE OF VARCHAR2. You must declare a type like this, or use a predefined one like OWA_UTIL.IDENT_ARR. To retrieve the values, use a loop:
CREATE OR REPLACE PROCEDURE handle_checkboxes ( checkboxes owa_util.ident_arr )
AS
BEGIN
FOR i IN 1..checkboxes.count
LOOP
htp.print('<p>Checkbox value: ' || checkboxes(i));
END LOOP;
END;
SHOW ERRORS;

I'm not sure I understand what your issue is.
If your web form has the following checkboxes defined all with the same name:
<input type="checkbox" name="attrib" value="1">one</input>
<input type="checkbox" name="attrib" value="2">two</input>
<input type="checkbox" name="attrib" value="3">three</input>Then you would create and register a procedure to handle the form submission that has a parameter with the name attrib of type owa_util.ident_arr e.g.:
create or replace procedure handle_form(attrib owa_util.ident_arr) as
iter number;
begin
for iter in attrib.first .. attrib.last loop
    -- do something with attrib(iter)
end loop;
end;
/Now the one problem with this handler (or any form handler for that matter) is that if the user selects none of the check boxes, or no value for any of the expected parameters, the handler would be called with some parameters missing or with out any parameters passed to it, and the call will error out.
To get around that you need to provide default values for all the parameters passed to your handler including the ident_arr parameters, however with ident_arr parameters that's difficult to do with standalone procedures. If you place your procedure in a package you can define package level variables of the appropriate types that can be used as default values:
create or replace package my_web as
empty_arr owa_util.ident_arr;
procedure handle_form(attrib owa_util.ident_arr := empty_arr);
end my_web;
create or replace package body my_web as
procedure handle_form(attrib owa_util.ident_arr := empty_arr) as
    iter number;
begin
    for iter in attrib.first .. attrib.last loop
      -- do something with attrib(iter)
    end loop;
end;
end my_web;
/now when you hit the situation where the user doesn't select any check boxes, the call to handle_form won't err out due to missing parameters, and the empty_arr won't have any elements to iterate over so the loop in the procedure body will be fine and you will be able to retrieve each selected check box value from the attrib array when you iterate over it.

URGENT:How to pass parameter to page from java portlet

Hi,
All i need to do is to pass a parameter from my custom java portlet to an omniportlet. Is it achievable? If so, please point me direction!
Thanks,
Ceren

Hmm yeah or else you could use java.net.URLEncoder.encode(String s) to encode it automatically.
(java.net.URLDecoder.decode(String s) decodes btw)

How can I pass parameter from report to form?

Hi :)
Now I try to build conference room like this by using form
and report. And i design that when users click at group report
then i'll show page that contain questions report and add
question form. And question form and report must receive the
same parameter from group report.
First Problem: is I don't know how group report send the
same parameter to question report and add question report at the
same time. And is it possible??? If not please suggest me what
should I do???
Second Problem: is I don't know how can I pass parameter from
report to form. I don't know the way to do it.
Please tell me!!! Please...
I look forward to hearing from all of you.
Thank You.

One way is to create a link based on that form and attach that
link with the report. Through links you can pass parameters

How to pass an object from jsp to other jsp using SendRedirect

How to pass an object from one jsp to the other jsp using ssendRedirect with out using the session
I am having 2 jsps
x.jsp and y.jsp
From x.jsp using sendRedirect iam going to y.jsp
From x.jsp i have pass an object to the y.jsp
Is it possible without putting the object in session
Is it possible using EncodeUrl
Please help me Its Urgent

Is it possible without putting the object in sessionAnything is possible. Would you accept that it is very difficult?
When you send a redirect, it tells the browser to send a new request for the target page. That means any request parameters/attributes are lost.
Is it possible using EncodeUrl response.encodeURL() puts the session id into a url if the browser does not support cookies. It is purely for retaining the session.
There are two ways that you can communicate across a sendRedirect.
1 - use the session
2 - pass a parameter in the url.
parameters are string based, so passing objects is almost out of the question.
Potentially you could serialize your object, encode it in base64 (so it is composed completely as characters) and pass it as a parameter to the other page, where you retrieve it, unencode it, and then load the serialized object.
Or you can just use the session.

Extremely URGENT! How to pass a parameter from html to form?

Similar Messages

Maybe you are looking for