F-22 on save exit to change value

hi,
is there any exit on SAVE of F-22 , actually i have add one field in bkpf now i want to insert that field into BKPF. any idea??

Use the developer tools available to you - do a runtime analysis on the transaction. You'll find the exits in the call stack. For the BTE's, you can read the corresponding documentation in FIBF.

Similar Messages

Not able to get changed values in the SAVE EVENT in ServHPartnerDet view

Hi Experts,
I am new CRM WEB IC, i have requirement like need to access four IBASE fields from BupaIbaseDetail and need to display those fiedls in ServHPartnerDet view. I am able display the fields and its values in the target view. But when user press change button and changes those four fields and press save button not able get the changed values in to the SAVE EVENT.Anyone please help me in this.
IBHEADER , IBASEADDRESS are the CONTEXT NODE CREATED in target view. I have binded IBHEADER to CuCoIbase custom controller and getting four fields data from IBASEADDRESS. below is the code for CREATE_CONTEXT_NODES.
METHOD create_ibaseaddress.
DATA:
    model        TYPE REF TO if_bsp_model,
    coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
    entity       TYPE REF TO cl_crm_bol_entity,              "#EC *
    entity_col   TYPE REF TO if_bol_entity_col.             "#EC *
model = owner->create_model(
      class_name     = 'ZL_CRM_IC_SERVHPDET_CN00'
      model_id       = 'IBaseAddress' ).                    "#EC NOTEXT
ibaseaddress ?= model.
CLEAR model.
coll_wrapper =
    ibheader->get_collection_wrapper( ).
TRY.
      entity ?= coll_wrapper->get_current( ).
    CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
    TRY.
        entity_col = entity->get_related_entities(
                        iv_relation_name = 'FirstLevelComponent' ).
      CATCH cx_crm_genil_model_error.
    ENDTRY.
    TRY.
        entity ?= entity_col->get_current( ).
      CATCH cx_sy_move_cast_error.
    ENDTRY.
    CLEAR entity_col.
    IF entity IS BOUND.
      TRY.
          entity_col = entity->get_related_entities(
                          iv_relation_name = 'ComponentAddress' ).
          ibaseaddress->set_collection( entity_col ).
        CATCH cx_crm_genil_model_error.
      ENDTRY.
    ENDIF.
ENDIF.
ENDMETHOD.

Code i have written in the CREATE_CONTEXT_NODE method for my custom context nodes( IBHEADER,IBASEADDRESS).
this CREATE_IBHEADER some data related to IBASE header then from this reading the IBASEADDRESS contextnode fields for displaying in the ServHPartnerDet. It is working fine but After changing the four fields values in the ServHPartnerDet view and trying to save, then context is not reading the new values it gives the old values only.
TRY.
      lr_coll_wr = ztyped_context->ibaseaddress->get_collection_wrapper( ).
      IF lr_coll_wr IS BOUND.
        lr_entity ?= lr_coll_wr->get_current( ).
      ENDIF.
    CATCH cx_crm_genil_model_error.
ENDTRY.
CALL METHOD lr_entity->if_bol_bo_property_access~get_property_as_value
    EXPORTING
      iv_attr_name = 'BUILDING'
    IMPORTING
      ev_result    = lw_building.
the building has got result of old value no the new value.
method CREATE_IBHEADER.
    DATA:
      model        TYPE REF TO if_bsp_model,
      coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
      entity       TYPE REF TO cl_crm_bol_entity,    "#EC *
      entity_col   TYPE REF TO if_bol_entity_col.    "#EC *
    model = owner->create_model(
        class_name     = 'ZL_CRM_IC_SERVHPDET_CN01'
        model_id       = 'IBHEADER' ). "#EC NOTEXT
    IBHEADER ?= model.
    CLEAR model.
bind to custom controller
DATA:
      cuco TYPE REF TO cl_crm_ic_cucoibase_impl,
      cnode TYPE REF TO cl_bsp_wd_context_node.
cuco ?= owner->get_custom_controller(
        'CuCoIbase' ).                                      "#EC NOTEXT
cnode ?=
    cuco->typed_context->ibaseheader.
coll_wrapper = cnode->get_collection_wrapper( ).
ibheader->set_collection_wrapper( coll_wrapper ).
endmethod.

Save SELECT_LIST_FROM_QUERY changed value

Hello.
We have a tabular form with APEX_ITEM.SELECT_LIST_FROM_QUERY LOV as item in query.
List shows in forms as expected.
Column attribute is set to Display as Text (based on LOV, does not save state).
Now users want to save LOV value when they change it.
What value must be set in column attribute, so the changed value can be saved.
We tried all the other settings, but then the LOV isn't displayed correctly or it doesn't work.
Maybe APEX_ITEM.SELECT_LIST_FROM_QUERY LOV changed value can't be saved in tabular form?
Any idea?
Thanks.
Regards,
Dejan

Hello.
For one column in my tabular form i need "select list".
I can create my own LOV and set column to "select list (named LOV)".
But my LOV must have where sentence which uses another column value (from the same row).
And that value can be different in every row - that means that LOV will be different in every row.
But i can't (or don't know) how to write where with another column value in it - for LOV.
Thanks.
Regards,
Dejan

User Exit: AFAR0002. How to change value in field: ANLC - NAFAP?

Hi,
At the moment I am working on custom Depreciation Key for which the depreciation for period (and subperiods) will be recounted and taken into account for depreciation posting.
I try to use exit AFAR0002 for this purpose.
I am able to count and change the value of depreciation for each subperiods. The problem is, that I cannot change the value of "Ordinary depreciation that is planned for the asset in the current fiscal year" for the pierod '000'. Due to this, in the last period of the current fiscal year system tries to reverse the sum of planned depreciation in previous subperiods. It simply tries to meet the "planned depreciation for fiscal year' with the sum of planned depreciation for subperiods.
example:
ANLC-NAFAP = 100.
Active Asset value = 1000
Depreciation for periods:
001     ->     -50
002     ->     -50
003     ->     -50
004     ->     -50
005     ->     -50
006     ->     -50
007     ->     -50
008     ->     -50
009     ->     -50
010     ->     -50
011     ->     -50
*012     ->     450
planned value -> -100
The questions are:
1. is it possible to change value in ANLC-NAFAP in this exit
2. How it sould be done.
Thanks in advance for help.
Regards,
Wojciech

Dear Paul,
I had run AFAR. The report changed to '0' the value of ANLC-NAFAP field - sth changed - thanks.
But I still have a problem to set this value to the sum of planned depreciation for each month. At the moment, in the last period the system tries to reverse all planned "sub"depreciation to '0' in total.
Is it any additional condition that has to be fulfilled in order to change the value of "Ordinary depreciation that is planned for the asset in the current fiscal year" for the pierod '000'?
Regards,
Wojciech

Is there any user exit for changing V1 field value?

Hello Expert,
Is there any user exit for changing V1 update value?
For example, sales order number will populate 2LIS_11_VAHDR-VBELN. If other value need to populate 2LIS_11_VAHDR-VBELN, can we use any user exit to customize the V1 routine?
Please forget the enhancement for 2LIS_11_VAHDR. Just populate the system field VBELN.
Thanks
F-B-I

Hi,
Use the 'usual' user-exit for transactional data in R/3 EXIT_SAPLRSAP_001 (CMOD). Here your can overwrite VBELN for each extracted record with the value you want.
Hope this helps.
Grtx
Marco

Urgent..getting default & changed values in ALV editable....have ur point.s

Hi all,
I m using interactive ALV grid with 1 column editable with some default values, When i m clicking on SAVE button, only the values which are changed by the user in that column are coming in the internal table, & the default values are automatically deleted by the following code....
But my requirement is to save all the default & changed values of the ALV column....
Help me out & have ur points.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
importing
 e_grid = ref1
CALL METHOD ref1->check_changed_data
IMPORTING
 e_valid =
CHANGING
 c_refresh = 'X'

Pradeep,
When ur doing the CHECK_CHANGED_DATA, u ll get the edited values inside this callback sub -routine only. so here u trap the values those are changed ( thats after editing).
Once the control goes back to the original program ( calling prog ) , u ll end up with ur old data ( before editing).
you ll have to handle that explictly in your code, or shift to OO alv grid like this -
REPORT ZSKC_GRID.
TABLES : EQUI.
DATA : BEGIN OF T_EQUI OCCURS 0,
 EQUNR TYPE EQUI-EQUNR,
 AENAM TYPE EQUI-AENAM,
 END OF T_EQUI.
DATA : T_FCAT TYPE LVC_T_FCAT,
 G_FCODE TYPE SY-UCOMM.
DATA : G_GRID TYPE REF TO CL_GUI_ALV_GRID.
SELECT-OPTIONS: S_EQUNR FOR EQUI-EQUNR.
START-OF-SELECTION.
* get data.
PERFORM SUB_GET_DATA.
* Populate catalog.
PERFORM SUB_BUILD_CATALOG CHANGING T_FCAT.
* Display the grid.
PERFORM SUB_SHOW_GRID.
CALL SCREEN 9001.
*& Form SUB_GET_DATA
* Get data
FORM SUB_GET_DATA .
SELECT EQUNR AENAM
FROM EQUI
INTO TABLE T_EQUI
WHERE EQUNR IN S_EQUNR.
IF SY-SUBRC NE 0.
* Give some message if needed
ENDIF.
ENDFORM. " SUB_GET_DATA
*& Form SUB_BUILD_CATALOG
* text
* <--P_T_FCAT text
FORM SUB_BUILD_CATALOG CHANGING PT_FCAT TYPE LVC_T_FCAT.
DATA : WA_CAT TYPE LVC_S_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'EQUNR'.
WA_CAT-TABNAME = 'T_EQUI'.
WA_CAT-REF_FIELD = 'EQUNR'.
WA_CAT-REF_TABLE = 'EQUI'.
APPEND WA_CAT TO PT_FCAT.
CLEAR WA_CAT.
WA_CAT-FIELDNAME = 'AENAM'.
WA_CAT-TABNAME = 'T_EQUI'.
WA_CAT-REF_FIELD = 'AENAM'.
WA_CAT-REF_TABLE = 'EQUI'.
WA_CAT-EDIT = 'X'.
APPEND WA_CAT TO PT_FCAT.
ENDFORM. " SUB_BUILD_CATALOG
*& Form SUB_SHOW_GRID
* Show grid
FORM SUB_SHOW_GRID .
* create the Grid Object.
CREATE OBJECT G_GRID
 EXPORTING
 I_PARENT = CL_GUI_CONTAINER=>SCREEN0
 EXCEPTIONS
 ERROR_CNTL_CREATE = 1
 ERROR_CNTL_INIT = 2
 ERROR_CNTL_LINK = 3
 ERROR_DP_CREATE = 4
 OTHERS = 5.
CHECK SY-SUBRC EQ 0.
* Display contents,
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 CHANGING
 IT_OUTTAB = t_equi[]
 IT_FIELDCATALOG = t_fcat
 EXCEPTIONS
 INVALID_PARAMETER_COMBINATION = 1
 PROGRAM_ERROR = 2
 TOO_MANY_LINES = 3
 others = 4.
ENDFORM. " SUB_SHOW_GRID
*& Module STATUS_9001 OUTPUT
* text
MODULE STATUS_9001 OUTPUT.
 SET PF-STATUS 'PF_9001'.
 SET TITLEBAR 'TITLE_9001'.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9001 INPUT
* text
MODULE USER_COMMAND_9001 INPUT.
CASE G_FCODE.
 WHEN 'BACK' OR 'CANC' OR 'EXIT'.
 LEAVE TO SCREEN 0.
 WHEN 'HAVE'.
* After editing everything user presses this button.
 PERFORM SUB_GET_EDITED_DATA.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Form SUB_GET_EDITED_DATA
* Read the ALV grid and get current internal table.
FORM SUB_GET_EDITED_DATA .
DATA : T_OLD_DATA LIKE T_EQUI OCCURS 0.
* hold the old values if u need them.
t_old_data[] = t_equi[].
* This will update the global internal table.
CALL METHOD G_GRID->CHECK_CHANGED_DATA.
* Now t_equi have changed here. u have the old data in the T_OLD_DATA.
BREAK-POINT.
ENDFORM. " SUB_GET_EDITED_DATA
Create a blank screen called 9001. and Pf-staus has a buton with fcode "HAVE". ( alongwith BACK canc exit).

ME21N-ME51N - change value of field at item level

Hello All,
We create a purchase requisition from a sales order and after a purchase order in reference to the purchase requisition.
We would like to have the sales order number in the EBAN-BSTNR and/or in EKPO-BEDNR.
We found some user-exits but it seems that we can't change value of standard fields with these.
Could someone help us to find a solution ?
May be with a BADI ?
Thanks
Véronique

The code below should work for you, as for explanation why it will work look at SAP note 178328 over some coffee! )
I gave some explanation below the code but the SAP note explains it in more detail
DATA: ls_yvbap LIKE yvbap.
* Sales doc is in creation mode
IF t180-trtyp = charh.
LOOP AT xvbap.
 xvbap-spart = cobl-spart.
 MODIFY xvbap.
ENDLOOP.
ENDIF.
* Sales doc is in change mode
IF t180-trtyp = charv.
LOOP AT xvbap.
* Append Y-table and set update flag if necessary
 IF xvbap-updkz EQ space.
* Save unchanged version of XVBAP to YVBAP
 ls_yvbap = xvbap.
 APPEND ls_yvbap TO yvbap.
 <xvbap-updkz = charu.
 upd_vbap = charu.
 ENDIF.
 xvbap-spart = cobl-spart.
 MODIFY xvbap.
ENDLOOP.
ENDIF.
SAP uses two internal tables XVBAP and YVBAP in sales document processing. XVBAP which contains the order items as they are currently after the user changed them on the screen, whereas YVBAP stores only changed item records the way they were before change. So YVBAP is only populated in change mode and not in creation mode. So if we are updating XVBAP when sales document is in change mode, we should ensure that YVBAP also contains the same record the way it was before our change.
SAP will only update the records to database if we ensure the integrity of XVBAP and YVBAP internal tables.

Need to know the user exit to change unlimited check box in delivery tag

Need to know the user exit,
To change the unlimited check box(EKPO-UEBTK) in delivery tag of item details for tcode ME21N/ME22N on SAVE.
Thanks in Advance.
Baburaj

HI Baburaj,
Use the BADI ME_PROCESS_PO_CUST to change the unlimited check box(EKPO-UEBTK)
Implement the BADI and insert the code in the method PROCESS_ITEM
Example code :
*Data Declarations
DATA: ls_mepoitem TYPE mepoitem,
 ls_mepoitemx type mepoitemx,
 ls_customer TYPE mepo_badi_exampl,
 ls_tbsg TYPE tbsg.
INCLUDE mm_messages_mac. "useful macros for message handling
*here we get item data
ls_mepoitem = im_item->get_data( ).
*work area for price value
data : begin of it_eban,
banfn type mepoitem-banfn,
bnfpo type mepoitem-BNFPO,
pries type mepoitem-NETPR,
end of it_eban.
*Get the Purchase requisition price from EBAN table
select single banfn bnfpo preis from eban into it_eban
 where
 banfn = ls_mepoitem-banfn
 and bnfpo = ls_mepoitem-bnfpo.
*if entry is available.
if sy-subrc eq 0.
*check if price is zero
 if it_eban-pries EQ 0.
*if zero, set FREE field of PO to 'X'.
 ls_mepoitem-uebtk = 'X'.
 endif.
 endif.
*Set updated fields
CALL METHOD im_item->set_data
EXPORTING
im_data = ls_mepoitem
Reward if Helpful*****

Material classification - Searching exit to change/add characteristic vals

Hi all,
I am searching for an exit or BADI what allows to change or add characteristic values. This shall happen on <enter> in MM01 or MM02 and would be great to word also in BAPI calls updating the classification.
Exit EXIT_SAPLCLFM_002 does not work on one hand since it is called after check for mandatory entries. Therefore there is no chance, to fill them before. Also the user will not see the result.
BADI IF_EX_CACL_VALUE_CHANGE~MODIFY_INPUT does not work since it has no chance, to manipulate content. It just offers changed values to check. A try to use CTMS functions to manipulate DDB was not succesful. I did not find any chance to react on a given changed value changing or inserting values for other characteristics within the allocated classes. Any call for CTMS_DDB_SET_VALUE lets the classifcation struggle - even if repetitive calls of the BADI are avoided.
Does anyone have an idea?
Thanks in advance.
Axel

Hi Vijay,
thank you for thinking about it.
My task is to react on an update to a characteristic in MM01, MM02 and any other more general transaction to maintain the material classification like mass updates etc. I want to derive from the entered value of several updated characteristics other ones from the allocated class. These derived characteristic values might be still empty but mandatory. I do not want to see any popups inquiring this content before my exit has the chance to fill it. I prefer that this is done on <enter> and not on <save> and want to show the user the enhanced class values. Optimum would be that this also happens in a BAPI call with the same logic.
I hope this clarifies the task.
Axel

Program exit to change workitem text

Hi All,
I have a requirement to change work item text at runtime, i am using program exit to change the task contrainer variable which is being used to display work item text. i have written a code in program exit to update container element, but it's not reflected to change workitem text, when i check in ln workflow log the variable shows with updated value.
Please help to solve issue.
Many thanks,

Hi Gupta,
I used below code to update container element.
CASE im_event_name.
     WHEN swfco_event_after_creation.
        CLEAR l_value.
       CALL METHOD l_wi_cont->get
         EXPORTING
           name = 'LV_WITEXT'
         IMPORTING
           value = l_value.
         REPLACE '$' INTO l_value WITH lv_id.
       CALL METHOD l_wi_cont->set
         EXPORTING
           name = 'LV_WITEXT'
           value = l_value.
With above code LV_WITEXT is updated with new value, but same is not displayed as workitem text in inbox.
After workitem displayed in inbox if i use FM SWL_REFRESH_WORKITEM_TEXT explicitly to refresh, workitem text getting refreshed.
Many thanks.

Delta Extractor Is not picking changed values

Hi All,
When the values or texts in a PO are changed the delta extractor is picking up the changed values as deltas (provided the changes where done in PO Header or Item Overview) but when a PO values or text that are changed in the Item Details the delta mechanism is not picking up the changed values (the fields whose values are changed were initially not in the LO Cockpit Extractor they where added and the values to these fields are populated using an ABAP Program)
Is there a reason that Delta mechanism doesn't work for fields that are not delivered by the SAP Extractor or do we need to modify the code in order to collect these changed values by Delta Mechanism (Direct Delta as the Update Mode).
Please let me know if anybody came across the same problem .
Thank you all in advance.
Regards,
Dhanam

Hi,
this is another story.....
You'll have to
- enhance the PO items table (EKPO) with your fields
- activate the right customer exit for purchase orders (search in SMOD; or in this forum..) and populate your fields during this exit. if the field needs to be maintainable by the R3 user, you'll have find a SAP exit (again SMOD) in order customize one of the screen and populate your fields in R3.
- use another exit to populate the new fields to LO delta queue
- enhance your BW extract structure (done)
- and so on...
As you can imagine, the above get quite more complicated (an expert in MM shall support you) and it needs to be approved by the PM since you'll modify R3.
But that's basically it!
hope this helps...
Olivier.

Change Value A based on Value B in Web UI in cross component

Hi Friends,
I have a requirement to populate value A based on selection of value B in differenet component.
I have a web ui screen to create a complaint ( Component A ). After saving when I am clicking on follow up button, it will take me to next web ui screen ( Component B ) i.e. service order. Here I have a status field and after its selection when I have save. I also want to change value A of component A field.
Kindly suggest..how can I achive this.
Regards,
Narendra Goyal

Hi Narendra,
It depends on what the exact fields are. If you change a value in component A and this change goes to the BOL layer, then this changed value should always be accessible in component B if you use the same BOL object and BOL relation to access the data. And you can always change the value from component B and it should already change in component A. The only thing you need to ensure is to call publish_current( ) method on the node where you change the value or call a BOL code modify( ).
Regards,
Shiromani

How do you change values after logging data to the citadel database (DSC)?

How would one go about changing values that already exist in the citadel database. So say I were logging a numeric value with a timestamp for 1 year and then wanted to change a few values for the month of June because my sensor wasn't working at that time. How could I do this? Is it possible without re-creating the whole database over?
Thanks
Matt

mattyk wrote:
Hey Ben,
Thanks for the quick response. I called NI and asked about this because this would be a big show stopper for me. Their applications engineer said that the best way to change previous data would be to read in the trace that you want to change, modify it and save it as a new trace. I am also looking into SQL querying. I was able to connect to the citadel database by setting up a ODBC data source and using the database connectivity toolkit to query the database. This worked. Now I am trying to come up with a statement in SQL to change previously saved data. I'll Keep you posted.
Thanks
Matt
That reinforces my suspicions.
I have an app running for about 8 years now that keeps a paper trail to enusr ethe cartdiges used in respirators (operated NIOSH National Institute of Occupational Safety and Health par teh CDC) that use DSC to enusre nobody can ever falsify those records. If they can be hacked I my customer and anyone using a respirator with a NIOSH sticker on the side of it, want to know.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I am having trouble with an excel file wanting to save when no changes were made & opening as read only for the 2nd person - but allowing them to save the file.

1) I am having trouble with an excel file wanting to save when no changes were made. As soon as you open the file and exit. It prompts for a save.
All excel versions are 15.0.4701.1002.
Using a table.
the functions CELL, OFFSET, TODAY, INDIRECT, NOW, INFO and RAND are not being used.
2) Same file. 2nd person is being told they are opening the file as read only - but when they are quitting excel prompts them to save the file.
Everything was working fine. I started having problems with Excel, IT wiped my version out and re-installed office.
File is on networked server HP - Windows Server 2012 Essentials.
We are all on Windows 8.1 Pro.
I really hope someone can help - the excel expert had no answer - and passed me along to here.

I copied the whole file and started deleting worksheets one at a time and testing it by closing it and re-opening it then closing it again – to see if it wanted to save.
Once all the pivot tables were deleted – the problem went away.
I found that some of the pivot tables had automatic refresh upon open, so this caused the excel to think data had changed.
It is fixed now. By clicking on one cell of the pivot table, analyze, options, data and uncheck the 3rd square down to not automatically refresh. NOT A NETWORK ISSUE.

Change values while saving invoices

Hello,
This is the first time I'm on this forum, so excuse me if this topic is not at the right place ...
I search through a lot of articles in the forums, but I didn't found an answer on my question, so I ask my question here ?
I have to change the value of VBRK-ZUONR the moment an invoice is saved ... Does anyone has an idea of where I have to put this change ??
Thanks on advance,
Kurt Clement

Hi ,
check there
User Exits For Billing
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
Depending on the number range, table TVFKD is used to set the billing date (country-specific requirments in Italy). USEREXIT_NUMBER_RANGE is automatically deactivated when this user exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented or changed.
User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
USEREXIT_RELI_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAP_AVBPAK
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B):
EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD
After the accounting document is filled in with data, you can use exit 008 to change the document once again.
EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
Regards
Prabhu

F-22 on save exit to change value

Similar Messages

Maybe you are looking for