F Command For Rote Action?

Can anyone please tell me how to set up a command, perhaps an F Command, to allow me to do a remote activity... as if that activity were always in a type of clipboard? If so, please make the explanation fairly easy for me to understand.
For instance, in my family history program in the notes section I like to make the following spaced line between the entries to separate the entries:
----------------------------------------------

You would need to use a 3rd party keystroke application like QuicKeys, Simple Keys or a clipboard manager like iPaste, shadowClipboard and others. I use iPaste to remember and paste in over 100 text clips using the Contextual menu (i.e. Control-click or right click). Go to VersionTracker.com and do a search for keystroke or clipboard and you'll get a number of candidates. The link above to iPaste and my signature and tip were done with iPaste. No typing necessary.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • What is the command for Defragging?

    I was told that my system probably needs to be defragged. I heard that there is a Key Command for that action. Something like Com>Control>D>F. Not sure though, so does anyone know what it is?
    eMac   Mac OS X (10.3.9)  

    Take a look at this Apple document.
    2.0GHz MacBook, 15" 1.25GHz/12" 1GHz PBs, 2xPPC Mac minis, 12" iBook G4,   Mac OS X (10.4.8)   Cube, 2xTAMs, iPod 4G & nano 2G, 1G & 2G iPs, AEBS, AX

  • Command link / button action is not taking place if i use it in iterator.

    Hi,
    I am new to ADF, i am facing 1 issue while implementing ADF mobile browser application.
    Issue: command link / button action is not taking place if i use it in iterator. its just refreshing the page it self and displaying as no records.
    Scenario is i am populating the search results in results page from search page using iterator, i want to get the complete details in different page (results page -> details page) .
    I have tried in different ways.like
    case1:
    <tr:panelGroupLayout id="pgl2" layout="vertical" styleClass="af_m_panelBase">
    <tr:panelHeader text="#{classviewBundle.SEARCH_RESULTS}" id="ph1"/>
    <tr:iterator id="i1" value="#{bindings.SubjectVO1.collectionModel}" var="subject"
    varStatus="subIndx" rows="100">
    <tr:panelBox text="#{subject.Subject} #{subject.CatalogNbr} - #{subject.CourseTitleLong}"
    styleClass="af_m_listingPrimaryDetails" id="pb1">
    <f:facet name="toolbar"/>
    <tr:table var="ssrClass" rowBandingInterval="1" id="t1" value="#{subject.children}"
    varStatus="clsIndx" rowSelection="none"
    binding="#{SessionBean.subjectTable}" verticalGridVisible="true"
    emptyText="No Records" width="100%">
    <tr:column id="c9" sortable="false" styleClass="width:100%">
    <*tr:commandLink text="Section: #{ssrClass.ClassSection}-#{ssrClass.SsrComponentLovDescr} (#{ssrClass.ClassNbr})"*
    id="commandLink2" styleClass="af_m_listingLink"
    *action="#{pageFlowScope.BackingBean.searchaction}"></tr:commandLink>*
    //remaining code
    in this case commandlink action is not able to invoke serachaction() method
    case 2:
    <tr:commandLink text="Section: #{ssrClass.ClassSection}-#{ssrClass.SsrComponentLovDescr} (#{ssrClass.ClassNbr})"
    id="commandLink2" styleClass="af_m_listingLink"
    action="classdetails}"></tr:commandLink>
    in this case its not able to navigate to classdetails page.
    I gave correct navigation cases and rules in taskflow,but its working fine when the command link is out of iterator only.
    i tried with actionlistener too.. but no use.. please help me out of this problem .
    *Update to issue:*
    The actual issue is when i use command link/button in an table/iterator whose parent tag is another iterator then the action is not taking place.
    the structer of my code is
    < iterator1>
    #command link action1
    < iterator2>
    #command link action2
    </ iterator2>
    < /iterator1>
    #command link action1 is working but "#command link action2" is not...
    Thanks
    Shyam
    Edited by: shyam on Dec 26, 2011 5:40 PM

    Hi,
    To solve my problem I used a af:foreach instead.
    <af:forEach items="#{viewScope.DataBySubjectServiceBean.toArray}" var="text">
    <af:commandLink text="#{text.IndTextEn}" action="indicator-selected" id="cl1">
    <af:setActionListener from="#{text.IndCode}" to="#{pageFlowScope.IndicatorCodeParam}" />
    </af:commandLink>
    </af:forEach>
    By the way you need to convert the iterator to an Array using a ManagedBean.
    public Object[] toArray() {
    CollectionModel cm = (CollectionModel) getEL("#{bindings.TView1.collectionModel}");
    indicators = new Object[cm.getRowCount()];
    for(int i=0;i<cm.getRowCount();i++){
    indicators[i] = cm.getRowData(i);
    return indicators;
    public static Object getEL(String expr) {
    FacesContext fc = FacesContext.getCurrentInstance();
    return fc.getApplication().evaluateExpressionGet(fc,expr,Object.class);
    Hope that helps-
    Edited by: JuJuZ on Jan 3, 2012 12:23 AM
    Add getEL Method

  • Why can't I use the Average and Join commands in an action?

    Something I do a hundred times a day is select two endpoints, average them, and join them. I tried to make an action and map it to an Fkey, but Illustrator won't allow the Average or Join commands in an action. When I tried using the Insert Menu Command, it made Illustrator crash. Finally I managed to do it without Illustrator crashing, but there is then no way to hit "OK" in the Average dialog box via the Actions palette. Why is this apparently impossible?

    You have to use Actions Palette Flyout menu  >> insert menu item to get those menu items reocorded.
    To get action to stop crashing you need to Actions Palette Flyout menu >> Playback Options >> 1 sec or greater.
    There already are keyboard commands CMD J & OPT CMD J for these. Unfotunately you cannot record for example the next menu choice step such as BOTH.  A script likely could be written for this though, and you can try posting in the Illustrator scripting forum.

  • Firefox internal commands for some custom buttons

    Hi there! I have been looking for Firefox Browser internal commands list with commentaries describing what each of the commands is for. I want to add some custom toolbar buttons, so I need appropriate code for them.
    Particularly, I would like to learn the code (internal commands) for the following actions:
    1. "Show All Download" in the Library / Ctrl+J Shortcut;
    2. "Show All History" in the Library / Ctrl+Shift+H Shortcut.
    I use this code for "Show All Bookmarks in the Library" custom toolbar button (Ctrl+Shift+B):
    gBrowser.selectedTab = gBrowser.addTab("chrome://browser/content/places/places.xul"
    Unfortunately, you can't just replace "places.xul" with "downloads.xul" or "history.hul", while "browser/content/history/history-panel.xul" opens History Panel in the Side Bar and "browser/content/downloads/downloadPanel.xul" won't work at all.

    See if this helps you.
    https://developer.mozilla.org/en-US/docs/Mozilla/Tech/XUL/Tutorial/Keyboard_Shortcuts

  • Need help on Sql command for count

    Hi,
    I have the following table.
    Temp_Set Table
    ID Names Action
    1 John Delete
    2 John Add
    3 Mary Update
    4 Sim Add
    5 Sim Update
    How do I do a SELECT sql command for count(names) > 1 ?
    Please kindly advise me. Thank you very much.

    It doesnt work when I do this
    SELECT * FROM Temp_Set
    HAVING Count(names) > 1
    It prompts me the following error:
    ORA-00937: not a single-group group function
    00937.00000 - "not a single-group group function"
    *Cause:
    *Action:
    Error at Line:16 Column:7i am not sure but you can try this:
    SELECT B.* FROM
    (SELECT NAMES, COUNT(1) CNT FROM TEMP_SET GROUP BY NAMES) A, TEMP_SET B
    WHERE A.NAMES = B.NAME
    AND CNT > 1

  • Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

    Hi All,
    While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
    This is a custom notification.
    Please help.
    Thanks
    Raghava

    HI All,
    Please help on this issue.
    Thanks
    Raghava

  • Program for Leaving Action..

    Dear All,
    We have created a leaving action with set of Infotypes and certain actions and we have to carry out this action for about 5,000 employees.
    Now user needs to have a certain program to carry out the action as it's not feasible to carry out manually for 5,000 employees.
    Now my qestions to you all is
    1. Do you have any Std Program which takes care of this
    2. IS their any Std Function Module/BAPI exists which can be used
    3. Do we need to write our own BTC/LSMW/etc
    Kindly suggest.
    FYI : I have already tried one program using the FM - HR_INFOTYPE_OPERATION but this FM is not working for Action - DELIMIT (LIS9) for various Info types so now wondering what to do next. Kindly suggest.
    Thanks and have a nice day ahead.
    Mit freundlichen Grüßen/Best regards,
    Mangalagi S V

    Dear All,
    Thanks to all those who have responded to this.
    Unfortunately I can't go for BDC also as I was told that they might add/delete certain info types for this particular action.
    In my program, I am reading table T588M for the action and taking all the infotypes and the related action into my own internal table, after that I am generating the dynamic internal table for each infotype and then reading the Infotype using HR_READ_INFOTYPE and proceeding for related operations using HR_INFOTYPE_OPERATION but this LIS9 was not working so I have to check out as Suresh suggested. Hope every things goes fine with my coding...!!, any way it looks to be big exercise and needs lots of testing.
    Thanks for your valuable inputs.
    Regards,
    Mangalagi S V

  • Need example vi using AT commands for dialing the modem at the remote end

    Can any one give example vi for dialing up a modem and sending data to remote end

    Hi sindhu6,
    Presuming that you are connected to your modem via a serial connection:
    I did find a forum related to your enquiry: http://forums.ni.com/t5/LabVIEW/AT-commands-in-labview/td-p/1213335
    And I did find an example from ni.com: http://zone.ni.com/devzone/cda/epd/p/id/2577
    Basically, what you need to do is to find out what are the AT commands used for your modem and send the command over using VISA related functions (e.g. VISA Read VI). You can send the command in a sequantial method. You can do this by using the method found in the first link. The best would be that you can create a state machine where by each case/state will consists of commands that you need to run in a sequence (let's say a sequence of AT commands for sending a message via TCP/IP communication).
    You can also use a sequence structure but I would not suggest that since you cannot stop the sequence half way and if your command is very long, this may look pretty messy for your code.
    The main question is:
    What is the version of your LabVIEW?
    What is the modem that you are using and how is your hardware setup is going to be (e.g. how did you communicate with your modem)? 
    Thank you
    Warmest regards,
    Lennard.C
    Learning new things everyday...

  • Report for Hiring Action Along with BASIC Pay

    Dear
    I have created a BDC for hiring action for which data is updated in infotypes 0,1,2,6,7,8,9,14,15,16,41,105,587,588 mentioned in the infogroup.
    Earlier we are  not creating entries in 0008 now we need to BASIC PAY  in the hring Action.
    What should be the best apporch.
    Either we create perner by giving infotype values 0,1,2. and put this values in internal table and then update other infotypes.
                     OR
    In a single fo we provide all the data related to infotypes by using PA40.
    Now record need to be created of few of additonal infotypes which is not part of hiring action infogroup like 19,21,22,23,185.
    Thanks & Regards,
    Ravi

    Thanks for your valueable comment.
    AS hiring action it is must to input values of infotype 0,1,2.
    So acccording to you firstly, i need to hire a person through bdc.
    So for next infotypes i need to do by PA30. But for this i need pernr which i created in first step.
    how it is possible to  get perner created and then go for one by one infotypes sepratley.
    Rav Jordan
    Edited by: Rav Jordan on Dec 14, 2011 7:15 AM

  • Questions on Commands for planning application

    Hi,
    1. Where can i get the information on commands for planning functions?
    2. What is the difference between
    ---Execute planning function simple and -
    Execute planning function
    3. I create planning layout with few buttons
    a. Copy: I clicked on the copy button and can see the data in the layout
    b. Save: Clicked on the save icon, Data saved into the planning cube
    c. Change. : clicked on the change and changed few values and then clicked on SAVE button. Data got saved into my planning cube.
    Now I my requirement is when user open the planning layout, It should only be in display mode. But currently automatically all the keyfigures are in change mode (Is it because in query designer, I checked "Start query in the change mode?)
    When user opens the planning layout, he should run the copy function, then should save the data into the planning cube and then should be allowed to chagne. Change button should be in active until data is saved into the plannigng cube. IS this possible?
    Thanks
    Annie

    Hi Deepthi,
    Thanks for your reply.
    I did as you mentioned and its working as expected.
    User wants something like this
    1. Execute the planning layout.
    2. Click on the copy function
    3. Save the data
    4. Click on the change button so that data can be changed now.
    As per your solution, without have change button its working perfectly. But now i want to have change button on the layout. Initially change button should be disabled. When i save the data then it should get active.
    I did the following things but didnt work
    1. Save button i have two commands
    a. Save data
    b. Set_item_parameters
    2. Change button> disable>set_data_entry_mode.
    After executing the layout. I could copy the data and save it. BUT after saving it change button is not getting active.
    I think i did do something in save button (B). I just mentioned button group but didnt mention the change button. Can you please help me?
    Thanks
    Annie

  • How can I use custom WLST commands for Oracle SOA Suite in Weblogic

    Hi There,
    I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
    I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
    However, my WLST shell is not recognizing the commands and giving me the NameError!
    wls:/devDomain1/domainRuntime> listLogs()
    Traceback (innermost last):
    File "<console>", line 1, in ?
    NameError: listLogs
    I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
    I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
    - Launched the WLST shell from Oracle Home.
    cd ORACLE_HOME/common/bin
    ./wlst.sh
    - Tried to run the listLogs command from domainRuntime()
    I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
    I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
    There is no SOA Suite installed.
    Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
    Please advise if this is possible and how?
    Cheers.
    Satish

    I have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
    CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
    The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
    I hope this can help

  • What is the default key command for the COMMAND key?I seem to have changed it somehow along the way and now when I push the command key it hides all windows or shows desk top I need to correct this as soon as possible-.any ideas?

    What is the default key command for THE COMMAND (apple) key? I seem to have changed it somehow along the way and now when I push the command key (only) it hides all open windows and shows the desk top and when I push it again it shows all windows again...I need to return to default A.S.A.P. just this one key...Any ideas? Thanks in advance...

    Go to
     > System Preferences > Keyboard
    Click on the 'Keyboard' tab and hit the 'modifier keys...' button. You can see and change the defaults there.
    As I'm not sure if all the labels are the same in Lion, he's a screenshot from Snow Leopard. It should be similar enough:

  • Command for "How to find Cursor Size" in Oracle Stored Procedure"

    Hi
    Can u tell me....
    How to find Cursor Size" in Oracle Stored Procedure........
    I want command for that........

    why don't you try select count(*) from your_table;That requires running the same query twice - or rather running two different queries twice. Besides it still doesn't guarantee anything, because Oracle's read consistency model only applies at the statement level (unless you're running in a serialized transaction).
    This is such a common requirement - users are wont to say "well Google does it" - it seems bizarre that Oracle cannot do it. The truth is that that Google cheats. Firstly it guesses the number on the basis of information in its indexes and refines the estimate as pages are returned. Secondly, Google is under no onus to kepp all its data and indexes synchronized - two simultaneous and identical queries which touch different Google servers can return different results. Oracle Text works the same way, which is why we can get a count with CTX_QUERY.COUNT_HITS in estimate mode.
    Cheers, APC
    blog: http://radiofreetooting.blogspot.com
    .

  • Error in running juit test case for struts2 action class

    Hi,
    I am getting error when i am running my junit test case for struts2 action class. Here is the code.
    public class RoleMasterNewActionTest extends StrutsTestCase {
         public void setUp() throws Exception {
            super.setUp();
            ObjectFactory.setObjectFactory( new ObjectFactory() );
         public void testDoSomeThing()throws Exception {
              RoleMasterNewAction action = new RoleMasterNewAction();
              assertTrue(action.doSomeThing());
    }I am getting error at testDoSomeThing(). the error is
    2010-04-30 15:07:12,263 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts-default.xml]
    2010-04-30 15:07:12,325 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts-plugin.xml]
    2010-04-30 15:07:12,388 INFO [com.opensymphony.xwork2.config.providers.XmlConfigurationProvider] - Parsing configuration file [struts.xml]
    2010-04-30 15:07:12,388 WARN [org.apache.struts2.config.Settings] - Settings: Could not parse struts.locale setting, substituting default VM locale
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-Lookup
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-label
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-headings
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-messages
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.comman-setup
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.common-errors
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-label
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-lookup
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-headings
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-jndinames
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-jndinames
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-labels
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.birthCertificate.resources.birth-headings
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.admin.resources.admin-alert
    2010-04-30 15:07:12,388 INFO [org.apache.struts2.config.BeanSelectionProvider] - Loading global messages from ipl.comm.resources.form
    2010-04-30 15:07:12,419 INFO [org.apache.struts2.spring.StrutsSpringObjectFactory] - Initializing Struts-Spring integration...
    2010-04-30 15:07:12,419 FATAL [org.apache.struts2.spring.StrutsSpringObjectFactory] - ********** FATAL ERROR STARTING UP STRUTS-SPRING INTEGRATION **********
    Looks like the Spring listener was not configured for your web app!
    Nothing will work until WebApplicationContextUtils returns a valid ApplicationContext.
    You might need to add the following to web.xml:
        <listener>
            <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
        </listener>but already i have the listener configuration in my web.xml.
    Thanks in advance..

    I guess it wasn't reading the right web.xml file.
    You may prove it by deleting your web.xml file (don't forget to make a backup), and then run the test again to see whether the error is the same.

Maybe you are looking for