F4 help at field XREF1

Hi
can we get F4 help at field bseg-xref1 (reference filed 1) during transaction. if yes please revert in detail how to achieve it.
Thanks & Regards

Hello,
You need to repair BSEG table. Change BSEG and assign a search help for XREF1 field.
Regards,
Burak

Similar Messages

Transaction FBL3N - display field XREF1, XREF3

Hello all,
I have a problem with the transaction FBL3N. I can not see the value of field XREF1 and XREF3 in some variants. I can not add the field XREF3 into the table T021S.
Any suggestions ?
Marcela

Hello Marcela,
Because these fields is a field of table BSID/BSIK but not of BSIS, it
is offered you in the field catalogue under 'change layout'.
But to be able to use the field in FBL3N, you should define it as a
special field.
These fields need to be setup as Special Fields in T021S. You can do
this by the following path in IMG:
Financial Accounting->General Ledger Accounting->G/L Accounts->
Line Items->Display Line Items with ALV->Define Special Fields for
Finding and Sorting Data. (transaction OBVU).
Regarding the Special Fields, please see attached Note 215798. This
note will explain that the special fields need to be in table T021S
as well as in the RFPOSXEXT structure which can be verified via
se11. If these fields are not yet in RFPOSXEXT see Note 215798
(you can verify this in RFPOSXEXT by going to the bottom of the
structure and see under column 'Component' that special fields are
denoted by 'U_XREF1'). You may see a field XREF1
under the 'Component' column, but these fields are NOT the special
field. The special field is denoted by U_fieldname.
Also, to ensure you are using the Special Field in the display variant
-FBL*N when you select->Current display variant right mouse click on
the pop-up box and choose 'Show technical names'. The special fields
will be displayed as follows: 'U_XREF1'.
This will ensure that it is truly the special field you are using.
You will notice that there will be a field 'XREF1'. These
are NOT the special fields. You MUST use 'U_XREF1' in
the display variant to view the data.
You need to do the same for XREF2 ,...
Please refer to the following notes too:
215798 FBL*N: Special fields are not displayed
984305 Line item: Definition of special fields (T021S)
BR, Hana

F4 help for fields in maintenance view resp. generated maintenance screen

Hello,
Im new to ABAP and I have to deal with the following requirement:
I have a maintenance view V1 what from a maintenance screen was generated automatically by the maintenance screen generator.
Now I have to add a search help for one field F1 of the maintenance screen. The values for the search help of F1 depend on a specific value of a second field F2 of the maintenance screen. So I need value of F2 as import parameter for f4-help. F1 and F2 come from different tables.
As Im new to ABAP I have several questions or thoughts:
- Im not able to easily add a search help to F1 because Im using the maintenance view V1 and thats why it is not possible to assign the import parameter F2 to the search help right?
- In general, its not that easy to add search help to views than tables or structures - why?
- Im not able to just modify the generated objects because further automatic generation of the maintenance screen will delete it right?
- The generated function module provides user includes to add user specific coding. Is there any chance to add a f4-help to field F1 and assign value of F2 to that search help as import parameter with coding in user include?
- any other ideas? I did not expect this topic to be so complicated as the requirement to change f4-help in a maintenance view resp. screen isn't very special.
can anyone help me?
Thank You!
Regards
Fabian

Hi Fabian,
Phew! Thats quite a few questions in one... I'll try to answer them to best of my knowledge..
You can definitely have an external Search Help for a field of a Maintenance View, by calling it directly in the Screen Action Flow, using a PROCESS ON VALUE-REQUEST (like PAI or PBO). While defining such custom code on a generated screen, always make sure you do not write the coding inside the generated includes (SVIM* or <FUGR>TOP, <FUGR>DAT, etc..). Define new includes, or use those which are not generated by View Maintenance. This way, even if the dialogue is regenerated, your custom code will not vanish.
This will answer your questions 1 and 2 generally, and your question 3 also.
A Maintenance View, is something where values are read and populated purely at run-time. It does not have an Entry Help or such options, as it depends on the underlying tables. I hope this further helps with questions 1 and 2.
Coming to your question 4 and 5, which form the main question - pre-filling value of F2 while calling search-help for F1 - yes, it is possible. On the view maintenance screen, there are standard structure variables (like EXTRACT TOTAL etc), which will give you the field values of the current record. But, it can no way assure that when you call the help for F1, the field F2 is already filled!
For this, I can suggest that you programmatically implement a check to see if F2 value is filled, and read if it is. Or, if it is not filled, maybe you can shoot a Pop-up for F2, take the value at run-time, find help for F1 and get value, and also fill the F2 value (from your implementation) into the currect screen F2 value! (Phew...it is complex...)
But am sorry, there is no other way, wherein you can gaurentee that F2 value is pre-filled always, when you can help for F1. (You could try making F2 as obligatory on screen, but it still doesnt necessarily solve this purpose..!).
Hope it helps. Get back to me by e-mail if you need more help, or simple post a reply.
Regards,
Rekha

How to attach search help in field BEDNR in table EKPO

Hello, Experts!!!
I have a problem in attaching Search Help in field BEDNR in table EKPO.
Can anyone share something about this.. I've been dwelling on this for some time now,
but still wasn't able to find a solution.
Any thoughts would be highly appreciated.
Thank you!!!
Ellainne22

Hi,
I don't think you can directly link any search help with BEDNR without modification. If a search help was already linked, we could have gone for append search help. But in this case, nothing is there. So the options would be,
see whether you can insert any search help through enhancements in the screens..You have to do it in every screen then.
Other option is create a database view, & replace the dataelement with your own with a search help. You can refer this view after that.
or go for modification & change the dataelement.
Regards,
Gokul

Help in field exits

Hello
i'm working in ECC 6 and my req is to create a field exit for a data element so as to validate the field before saving ..
i have executed the program 'RSMODRPF' and created the function module and also in CMOD in 'Field exits for data elements' when i'm trying to assign the screen name and no, it is not getting saved. i understand i need to set the system parameter 'ABAP/FIELDEXIT' to 'YES'..
my question is how to set the above system parameter? also am i in the right direction in creating a field exit to validate the field?
Thanks in advance

Hi Shekar
<b>Please do not post multiple threads for same topic. We all could see the threads irrespective of where you have posted in ABAP Development section.
</b>
<b>The profile parameter abap/fieldexit should be set to 'YES'. Use transaction RZ11 to check the parameter value.</b>
Please read these threads which discusses the same problem and might be helpful,
problem field exit
Field exits don't work
Debugging Field Exits
Other Links
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
Regards
Kathirvel

Create search helps for fields of custom tables

Hi,
Could any one please provide me the step by step process to create search helps for fields in custom tables?
Thanks in advance,
Nobin.

Hello Nobin
There is basically no difference between a search help for standard vs. customer tables.
An important choise is the selection method for your search help:
Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
(1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
(2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
Regards
Uwe

Search helps of fields.

where we can find search helps of fields.any data base table is there???

Hi,
in the table DD30L u can find all the search helps in that table field is SHLPNAME
plzz reward if it is useful..
plzz dont forget to reward......

Search help for field of tcode MIGO

Hi,
I want to add search help for Goods recipient (GOITEM-WEMPF) field on MIGO screen, how to achieve that?
I tried with BADI MB_MIGO_BADI, but its now working.
Is there any BADI or field exit available?
Thanks

hi
i know that there are two options for defining the input help of a field.
1 Define the input help in ABAP dictionary. (recommended option)
2 Define the input help in the screen field. the disadvantage is that there is no automatic reuse.
1st option
Se11 --> create your own search help
    substeps:
        1) Enter short description
        2) selection method : this is the check table/view of the field GOITEM-WEMPF
        3) Search help parameter : parameters used in the search help.
        4) IMP: Import parameters
        5) EXP: Export parameters
        6) Lpos :hitting list [search result]position in the header [values 1,2,3,4,5]
        7)Spos: search position on the dialog search screen.
        8) data elements : they are from the selection method.
        9) Save and activate
        10) test this via the button "test"
       Note: the search help is not yet effective fo the field GOITEM-WEMPF
        11) Attach this search help for the table [ selection method mentioned above]
              a) Goto change mode of this table via SE11
              b) choose goto--> search help> for table
                        or Extras --> search help for table, in the next dialog box enter the name of search help
              C) The proposal created by the system for assigning the search help parameters to the key fields of the table is probably correct. check this and copy the definition.
              d) Active this table.
              e) Call the create entries function for table GOTIME again. the input help of field WEMPF should behave as desired.
regards,
Brian
Edited by: Brian Zhu on Mar 26, 2010 10:38 AM
Edited by: Brian Zhu on Mar 26, 2010 10:58 AM
Edited by: Brian Zhu on Mar 26, 2010 10:59 AM

Search help in bseg-xref1

Hello,
I pretend to assign a seach-help to the field bseg-xref1, how can i do it?
regards
JLeal

Close your eyes, click your heels together three times and say:
"The search help is there"
Rob

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3"   (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool       SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
*      indx TYPE i,
*      indxk TYPE i,
*      indxa TYPE i,
*      TCNT TYPE sy-tabix,
      lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita    TYPE TABLE OF ZLT_mita,
*      it_kunde   TYPE TABLE OF ZLT_KUNDE,
*      it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*&      Module STATUS_9000 OUTPUT
*       text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
    LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
       Endif.
    ENDLOOP.
      MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
*       text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
    When 'OK_GET'.
      Clear : flg_lock.
        IF ZLT_MITA-M1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
        IF sy-subrc = 0.
        CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
         EXPORTING
           MODE_ZLT_MITA        = 'E'
           MANDT                = SY-MANDT
           M1                   = ZLT_MITA-M1
*           X_M1                 = ' '
*           _SCOPE               = '2'
*           _WAIT                = ' '
*           _COLLECT             = ' '
         EXCEPTIONS
           FOREIGN_LOCK         = 1
           SYSTEM_FAILURE       = 2
           OTHERS               = 3
        IF sy-subrc <> 0.
          flg_lock = 'X'.
          lv_msgv1 = sy-msgv1.
        ENDIF.
        ENDIF.
        ELSE.
            MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
        ENDIF.
    When 'OK_SAVE'.
       Modify ZLT_MITA.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETE'.
        IF ZLT_MITA-M1 is NOT INITIAL.
            DELETE
            FROM ZLT_MITA
            Where M1 = ZLT_MITA-M1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*     When 'OK_FIRST'.
*           indx = 1.
*     When 'OK_NEXT'.
*           indx = indx + 1.
*     When 'OK_PREV'.
*           indx = indx - 1.
*     When 'OK_LAST'.
*           Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
    When 'OK_GETK'.
        IF ZLT_Kunde-K1 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Kunde
            Where K1 = ZLT_KUNDE-K1.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEK'.
       Modify ZLT_Kunde.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEK'.
        IF ZLT_KUNDE-K1 is NOT INITIAL.
            DELETE
            FROM ZLT_KUNDE
            Where K1 = ZLT_KUNDE-K1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
    When 'OK_GETA'.
        IF ZLT_KUnde-K2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEA'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEA'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
    When 'OK_GETP'.
        IF ZLT_Auftrag-A2 is NOT INITIAL.
            SELECT SINGLE *
            FROM ZLT_Auftrag
            Where A3 = ZLT_Kunde-K2.
        ELSE.
            MESSAGE S000(8i) With 'Enter Kunde Name'.
        ENDIF.
    When 'OK_SAVEP'.
       Modify ZLT_Auftrag.
       IF sy-subrc = 0.
         MESSAGE s000(8i) With 'Data Saved'.
       ENDIF.
    When 'OK_DELETEP'.
        IF ZLT_Auftrag-A1 is NOT INITIAL.
            DELETE
            FROM ZLT_Auftrag
            Where A1 = ZLT_Auftrag-A1.
          IF sy-subrc = 0.
            MESSAGE S000(8i) With 'Data deleted'.
          ENDIF.
        ENDIF.
    When 'OK_EXIT'.
       Leave Program.
    When 'OK_CLEAR'.
      Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
*              it_mita, it_kunde, it_auftrag,
      CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
       EXPORTING
         MODE_ZLT_MITA       = 'E'
         MANDT               = SY-MANDT
         M1                  = ZLT_MITA-M1
*         X_M1                = ' '
*         _SCOPE              = '3'
*         _SYNCHRON           = ' '
*         _COLLECT            = ' '
ENDCASE.
endmodule.                 " USER_COMMAND_9000 INPUT
*&      Module user_cmd_9000 INPUT
*       text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
      LEAVE PROGRAM.
ENDIF.
endmodule.                 " user_cmd_9000 INPUT

How to add search help for field in ALV object

Hello,
In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
Thanks,

Hi,
when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
Regards,
Klaus

F4 - Help for field in ALV Grid Output

Hi,
I generated a report which gives output in ALV Grid output.
In the output, 1 of the field is editable.Here, for this field I need to have my own F4-Help.
I think the procedure to be followed is:--
Create a Search Help in SE11.
Link the Search Help to the editable field.
Please let me know if its the correct procedure.
I f yes, how can I link user defined Search Help to the editable field?
Thanks,
Shivaa........

Hi siva,
you can also do that way.
while filling the fieldcatalog use the parameter F4AVAILABL
for more info check
F4 help in ALV Grid...
f4 help for a field in alv grid
hope it helps you
Thanks!
Edited by: Prasanth on Mar 6, 2009 3:59 PM

F4 help for field in ALV grid control (using ABAP objects)

Hi All,
    I have created a z table ZTAB which is a master table( with single column X). field X should be a input field in ALV Grid through F4 key. I have created searchelp and assigned it to data element of X feild, and in domain level I have assigned ZTAB as value table.
    And in ALV field catalog wrote ls_fcat-ref_tab = 'ZTAB'. But still I'm not getting list of values when I press F4.
Can anyone help me to understand what is missing here? How to call standardard F4 help?
This is very urgent..
Regards
Jaker.

u can refer to this standard program :BCALV_EDIT_08
also u wont get the list of values automatically..
declare a class :
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
    METHODS :
    handle_on_f4 for event onf4 of cl_gui_alv_grid
    importing e_fieldname es_row_no er_event_data,
ENDCLASS.               "LCL_EVENT_HANDLER
implementation of class
here u pass ur internal table what u want to display as pop up for f4 help.
*&       Class (Implementation) LCL_EVENT_HANDLER
       Text
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Method to handle F4 click.
Method handle_on_f4.
Function to create a popup and passing the values of internal table in it.
      CALL FUNCTION 'POPUP_WITH_TABLE'
        EXPORTING
          ENDPOS_COL   = 60
          ENDPOS_ROW   = 60
          STARTPOS_COL = 5
          STARTPOS_ROW = 5
          TITLETEXT    = 'pop up'
        IMPORTING
          CHOICE       = wa_grid-zfield
        TABLES
          VALUETAB     = ITAB
        EXCEPTIONS
          BREAK_OFF    = 1
          OTHERS       = 2.
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RETURN.
      ENDIF.
endmethod.                    "handle_on_f4
ENDCLASS.               "LCL_EVENT_HANDLER
hope this gives u some idea.

F4 help for field old material No in MM02 tcode

Hi Gurus,
I want to add F4 help to Old material No Field in MM02 Tcode.
I searched all possible Exits but couldnt find any one which triggers in the PBO.
Please give me suggestions.
Regards,
Milind

Hi,
In program SAPLMGD1 look for screen 2001. You can look for from here.
The other way you can create a program and put the field old mat. number here and match this field with your search help. Than with tcode OMT3B you can put this program to materal master basic data / general data 1 tab.
I hope this will help you.
Regards,
techmaster

F4 help for field placed in table control

Hi,
I have place one field in table control.When I call POV for this field and return back , I found no value in that field.
Is there any other way like to specify row index of selected field or any thing else?
Pls tell me ...
Thanks in advance..

HI
First check for standard search help is available for that particular field or not, if standard search help is available then assign to that field , if not use this
FM :   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
         retfield        = <FIELD NAME>
         dynpprog        = sy-repid
         dynpnr          = sy-dynnr
         dynprofield     = <screen field name>
         value_org       = 'S'
       TABLES
         value_tab       = t_vkbur
     EXCEPTIONS
       PARAMETER_ERROR = 1
       NO_VALUES_FOUND = 2
       OTHERS          = 3.

F4 help at field XREF1

Similar Messages

Maybe you are looking for