Facing error while performing hang analysis in RAC database.

Hi,
We have been performing hang analysis in one of our RAC databases. While doing this we faced the below error after executing the systemstate command.
SQL> oradebug -g all dump systemstate 266
Error 601 encountered by local DIAG [ospid=11984]
Error 601 encountered by remote DIAG [ospid=25384][instance=2]
Error 601 encountered by remote DIAG [ospid=688][instance=3]
Please help us to troubleshoot this and guide us on how to proceed.
Database version is as follows.
11.1.0.7
OS version is as follows,
$ uname -a
SunOS isdtarhp001 5.10 Generic_144488-06 sun4v sparc SUNW,T5240
$ isainfo -vk
64-bit sparcv9 kernel modules

Hi..
Check the note # SAP Note 1121978
SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
Check for the following...
CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
ChangeThreadCountStep =50
InitialThreadCount= 100
MaxThreadCount =200
MinThreadCount =50
Regards
Gangadhar

Similar Messages

  • Error while performing Risk Analysis at user level for a cross system user

    Dear All,
    I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
    The error is as follows:
    "ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
    Can anyone please help.
    Regards,
    Gurugobinda

    Hi..
    Check the note # SAP Note 1121978
    SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
    Check for the following...
    CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
    ChangeThreadCountStep =50
    InitialThreadCount= 100
    MaxThreadCount =200
    MinThreadCount =50
    Regards
    Gangadhar

  • Error while performing Oracle 11g upgrade

    Hi,
    I am facing error while performing an Oracle upgrade from 10.2.0.4 to 11.2.0.2.
    DBUA was disconnected with error Ora 1092 Oracle instance terminated.
    When tried to run manual upgrade it is showing the below error,
    SQL> @catupgrd.sql
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>
    DOC> The first time this script is run, there should be no error messages
    DOC> generated; all normal upgrade error messages are suppressed.
    DOC>
    DOC> If this script is being re-run after correcting some problem, then
    DOC> expect the following error which is not automatically suppressed:
    DOC>
    DOC> ORA-00001: unique constraint (<constraint_name>) violated
    DOC> possibly in conjunction with
    DOC> ORA-06512: at "<procedure/function name>", line NN
    DOC>
    DOC> These errors will automatically be suppressed by the Database Upgrade
    DOC> Assistant (DBUA) when it re-runs an upgrade.
    DOC>
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>#
    DOC>######################################################################
    DOC>######################################################################
    DOC> The following statement will cause an "ORA-01722: invalid number"
    DOC> error if the user running this script is not SYS. Disconnect
    DOC> and reconnect with AS SYSDBA.
    DOC>######################################################################
    DOC>######################################################################
    DOC>#
    no rows selected
    DOC>######################################################################
    DOC>######################################################################
    DOC> The following statement will cause an "ORA-01722: invalid number"
    DOC> error if the database server version is not correct for this script.
    DOC> Perform "ALTER SYSTEM CHECKPOINT" prior to "SHUTDOWN ABORT", and use
    DOC> a different script or a different server.
    DOC>######################################################################
    DOC>######################################################################
    DOC>#
    SELECT TO_NUMBER('MUST_BE_11_2') FROM v$instance
    ERROR at line 1:
    ORA-01722: invalid number
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Please help ASAP as this is a production system.
    Thanks,
    Prabhakar
    Edited by: prabhakaryc on Jun 19, 2011 2:47 PM

    prabhakaryc wrote:
    Hi Orkun Gedik,
    >
    > Thank you for your quick reply.
    >
    > Yes i am running this on windows and i have set with correct ORACLE_HOME (11202 directory)
    >
    > Do you think any other reason ? 
    >
    > I have seen this error log inside of catupgrd.sql and it seems to be very known error but i am not finding the solution anywhere ?
    >
    > Your quick reply helps me a lot.
    >
    > Thanks,
    > Prabhakar
    Hi Prabhakar,
    >> DBUA was disconnected with error Ora 1092 Oracle instance terminated.
    But, as far as I understand that you didn't completed DB upgrade succesfully. Under this circumstance, you shouldn't change ORACLE_HOME variable to 11.2.0.2. I suggest you that complete Oracle upgrade (restart DBUA) and do not execute upgrade procedures, manually.
    Best regards,
    Orkun Gedik

  • Error while running risk analysis.

    Hi,
    I am facing problem, while running risk analysis from Access Enforcer for a particular application. Infact problem is for all the connectors. I have done required configuration.
    Error i am getting is "Risk analysis failed: Exception from the service : Risk Analysis failed".
    Please suggest.
    Thanks in Advance.
    Regards,
    Pravin.

    Problem was with JCO connection.

  • System is giving ABAP run time error while perform LT06 or create TO with r

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    Short dump has not been completely stored. It is too big.
    P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    Hi,
    Go to Tcode ST22 and mentione the dump code there and check.
    Also take help[ of Abapers to fix it.
    Thanks
    Utsav

  • ABAP run time error while perform LT06 or create TO with respect to posting

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    >> Short dump has not been completely stored. It is too big.
    >       P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
    Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
    Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

  • Facing error while running ldapmodify

    Hello Gurus,
    I am facing error while running ldapmodify.
    Here is my port details from ldap.ora:-
    ===================
    # ldap.ora Network Configuration File: /widmmt/orasoft1/product/10.1.4/ldap/admin/ldap.ora
    # Generated by Oracle configuration tools.
    DIRECTORY_SERVERS= (eqsp3login.qantas.com.au::33014)
    DEFAULT_ADMIN_CONTEXT = ""
    DIRECTORY_SERVER_TYPE = OID
    ===============
    opmnctl status:-
    ==============
    widmmt@eqlpar047:/widmmt/orasoft1/product/10.1.4/ldap/admin> opmnctl status -l
    Processes in Instance: WIDMMT01.eqlpar047.qantas.com.au
    -------------------+--------------------+---------+----------+------------+----------+-----------+------
    ias-component      | process-type       |     pid | status   |        uid |  memused |    uptime | ports
    -------------------+--------------------+---------+----------+------------+----------+-----------+------
    HTTP_Server        | HTTP_Server        | 1581136 | Alive    |   99287176 |    25548 | 346:40:16 | http1:33000,http2:7200
    LogLoader          | logloaderd         |     N/A | Down     |        N/A |      N/A |       N/A | N/A
    dcm-daemon         | dcm-daemon         |     N/A | Down     |        N/A |      N/A |       N/A | N/A
    DSA                | DSA                |     N/A | Down     |        N/A |      N/A |       N/A | N/A
    OC4J               | OC4J_SECURITY      | 1810650 | Alive    | 2049507462 |    88688 | 346:40:14 | ajp:12501,rmi:12401,jms:12601
    OC4J               | OC4J_QFEQSSO       | 1921124 | Alive    |   99287177 |    56284 | 346:40:14 | ajp:12502,rmi:12402,jms:12602
    OID                | OID                | 1695982 | Alive    |   99287178 |    25252 | 346:40:23 | N/A
    =========================
    Please advice asa why I am getting error while running ldapmodify.
    Thanks-
    Pokhraj Das

    Hello gurus,
    When I am running the ldapmodify, it is getting at hang state.
    Actually the problem is the user [portaleqs] by using which I am logging to oiddas, is locked.
    Now I want to unlock the user by firing the below entry:-
    ==========
    ldapmodify -p 33014 -h <hostname> -D cn=orcladmin -w XXXX -v <<EOF
    dn: cn=portaleqs,cn=users,dc=xx,dc=xxxx,dc=com,dc=xx
    changetype: modify
    add: orclpwdaccountunlock
    orclpwdaccountunlock: 1
    EOF
    ===========
    Please suggest..
    Thanks-
    Pokhraj Das

  • I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

    I am facing error while running Quickpay in Fusion payroll that "The input value Periodicity is missing for element type KGOC_Unpaid_Absence_Amount. Enter a valid input value". Any idea?

    This is most probably because the Periodicity input value has been configured as "Required" and no value has been input for it.
    Please enter a value and try to re-run Quick Pay.

  • We are facing error while executing Bex report.

    Hi Gurus:
    We are facing error while executing Bex report.
    Messge :                                                                          
    u201CQuery 0: Runtime error program state check for conversation 05284411 / CP  with parallel processing via RFC
    Message no. DBMAN428u201D
    The query is based upon Multiprovider (based upon 2 basic cubes).
    Both cubes are partitioned by   info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
    Those cubes are not containing any non-cumulative key figures and Service package level for  SAP NetWeaver BI 7.0 is  u2018SAPKW70012u2019.
    I have checked those cubes in RSRV and carry out following steps:
    "All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
    I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
    Detail ERROR:
    Record with the DIMID 2 contains non-fitting time characteristics
    Message no. RSCV053Diagnosis
    The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
    I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019  for this but still not sure this will work or not .
    I tested this in dev server , didn't feel useful.
    Could you please let us know what to correct this error.
    Anwser will be rewared.
    Regards,

    >
    Surendra Pande wrote:
    > Anwser will be rewared.
    > Regards,
    Go read the RULES of these forums.

  • DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

    DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
    Can I know what this mean? It completely fail all entire job.
    Backup was on half way go, it already took about 3TB data and it fail.

    Hi Oneoa,
    Please verify the antivirus exeptions. Look at this two links for more information:
    http://technet.microsoft.com/en-us/library/ff399439.aspx
    http://support.microsoft.com/kb/928840
    I hope this solves your problem, please post your progress so I may assist you further.
    Best Regards
    Robert Hedblom
    MVP DPM
    Check out my DPM blog @ http://robertanddpm.blogspot.com

  • Facing error while invoice creation in AR.

    Facing error while invoice creation in AR as Please complete your tax accounting flexfield. We are creating invoice through API.
    Regards
    Sridhar

    Hi,
    Please go through the below Note ID.
    Autoinvoice Error On Tax Codes - Please Complete Your Tax Accounting Flexfield [ID 1469285.1]
    Regards,
    Raju.

  • "Error while accessing porting layer for ORACLE database via getSessionId()

    Hi,
    My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
    Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
         at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
         at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
         at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
         at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
         at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
         at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
         at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
         at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
         at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
         at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
         at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
         ... 90 more

    Actually, now (after the GRANT described in my reply before) the Exception has changed to:
    Caused by: com.sap.sql.log.OpenSQLException: Error while
    accessing porting layer for ORACLE database via
    <b>getDatabaseHost</b>().
         at com.sap.sql.log.Syslog.createAndLogOpenSQLException
    (Syslog.java:148)
         at com.sap.sql.jdbc.direct.DirectConnectionFactory.
    createPooledConnection(DirectConnectionFactory.java:527)
         at com.sap.sql.jdbc.direct.DirectConnectionFactory.
    createDirectPooledConnection(DirectConnectionFactory.java:158)
         at com.sap.sql.jdbc.direct.DirectConnectionFactory.
    createDirectPooledConnection(DirectConnectionFactory.java:118)
         at com.sap.sql.connect.factory.PooledConnectionFactory.
    createPooledConnection(PooledConnectionFactory.java:119)
         at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
    getPooledConnection(DriverPooledConnectionFactory.java:38)
         at com.sap.sql.connect.datasource.DBDataSourceImpl.
    createPooledConnection(DBDataSourceImpl.java:685)
         at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
    matchPool(DBDataSourcePoolImpl.java:1081)
         at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
    matchPooledConnection(DBDataSourcePoolImpl.java:919)
         at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
    getConnection(DBDataSourcePoolImpl.java:67)
         at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
    getConnection(DatabaseDataSourceImpl.java:36)
         at com.sap.engine.services.dbpool.spi.
    ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
         ... 90 more

  • Error while reading file entries from the database

    Hi there,
    We are running a instance of xmii 12 in a VM (VMware) and after somebody shutdown the host machine without shutting down the VM (great idea isn't it?) we keep getting this message when trying to access xMII:
    "Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Error while reading file entries from the database."
    Any clue? Any suggestion on how we can recover from that?
    Thanks a whole lot,
    Dom
    Server log:
    #1.5 #000C29A3B1F20002000000C400000F2800044829A35270F8#1205243578005#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application started successfully.#
    #1.5 #000C29A3B1F20002000000C500000F2800044829A3527A6C#1205243578005#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###application [] Start of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
    #1.5 #000C29A3B1F20002000000C600000F2800044829A3527DB5#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 305221750#
    #1.5 #000C29A3B1F20002000000C700000F2800044829A3527E03#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation startApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 221 ms.#
    #1.5 #000C29A3B1F20002000000C800000F2800044829A3528B49#1205243578005#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Error#1#com.sap.engine.services.deploy#Plain###Error occurred while initially starting application sap.com/xappsxmiiear:Error while reading file entries from the database.#
    #1.5 #000C29A3B1F20002000000CA00000F2800044829A352922B#1205243578015#/System/Server##com.sap.engine.services.deploy####n/a##60152160ef7211dcb7a5000c29a3b1f2#SAPEngine_System_Thread[impl:5]_17##0#0#Info#1#com.sap.engine.services.deploy#Plain###The synchronization of applications with DB completed for 39304 ms.#
    #1.5 #000C29A3B1F200040000000200000F2800044829B290A4F8#1205243834341#/System/Server/SLDService##com.sap.sldserv.DataCollector####n/a##0da42150ef7311dcb908000c29a3b1f2#SAPEngine_System_Thread[impl:5]_7##0#0#Warning#1#com.sap.sldserv.DataCollector#Plain###Communication configuration is incomplete. No data transfer possible until corrected.#

    Well thanks for the hint. Actually, the DB was up but corrupted. I managed to solve the bug by re-deploying xMII (using the SDM tool) which kept all my data but redeployed both the config db of (x)mii and the class files.

  • Facing error while deploying ADF application on weblogic

    We are trying to deploy an ADF Application on weblogic server. We are facing below quoted error (java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet) during deployment:
    INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
    <Nov 2, 2011 11:32:21 AM IST> <Warning> <J2EE> <BEA-160188> <Unresolved WebApp library references defined in weblogic.xml, of module 'CallTracker_CallTrackerUI_webapp1.war' [Extension-Name: adf.oracle.domain.webapp, exact-match: false], [Extension-Name: jstl, Specification-Version: 1.2, exact-match: false], [Extension-Name: jsf, Specification-Version: 1.2, exact-match: false].>
    java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet
    at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
    at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:321)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:266)
    at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
    at weblogic.servlet.internal.WebAnnotationProcessorImpl.processServlets(WebAnnotationProcessorImpl.java:225)
    at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:209)
    at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:105)
    at weblogic.application.compiler.WARModule.processAnnotations(WARModule.java:433)
    at weblogic.application.compiler.EARModule.processAnnotations(EARModule.java:227)
    at weblogic.application.compiler.WARModule.merge(WARModule.java:483)
    at weblogic.sip.tools.SipToolsModule.merge(SipToolsModule.java:57)
    at weblogic.application.compiler.flow.MergeModuleFlow.compile(MergeModuleFlow.java:23)
    at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
    at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
    at weblogic.application.compiler.ReadOnlyEarMerger.merge(ReadOnlyEarMerger.java:49)
    at weblogic.application.compiler.flow.AppMergerFlow.mergeInput(AppMergerFlow.java:88)
    at weblogic.application.compiler.flow.AppMergerFlow.compile(AppMergerFlow.java:41)
    at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
    at weblogic.application.compiler.FlowDriver$CompilerFlowDriver.compile(FlowDriver.java:96)
    at weblogic.application.compiler.AppMerge.runBody(AppMerge.java:157)
    at weblogic.utils.compiler.Tool.run(Tool.java:158)
    at weblogic.utils.compiler.Tool.run(Tool.java:115)
    at weblogic.application.compiler.AppMerge.merge(AppMerge.java:169)
    at weblogic.deploy.api.internal.utils.AppMerger.merge(AppMerger.java:88)
    at weblogic.deploy.api.internal.utils.AppMerger.getMergedApp(AppMerger.java:63)
    at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createDeployableObject(WebLogicDeployableObjectFactoryImpl.java:181)
    at weblogic.deploy.api.model.internal.WebLogicDeployableObjectFactoryImpl.createDeployableObject(WebLogicDeployableObjectFactoryImpl.java:163)
    at weblogic.deploy.api.tools.SessionHelper.initialize(SessionHelper.java:727)
    Please advise. We are using weblogic 10.3.5 .

    Thanks, we have reinstalled the weblogic again , ensuring that Application Development Runtime is installed and we extend our domain with the JRF. So the previous error is resolved. But we are now facing a new error
    weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: No credential mapper entry found for password indirection user=apps for data source XXCT
    - Warning Errors were encountered while performing this operation.
    Please help.
    Regards, Atul

  • Connection error while performing basic settings SOLMAN 4.0 SP12

    Hi All,
    We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard. Within the "Initial Configuration Part I" section, an error while connecting to SAP is obtained (This is the full error message "Error creating communication to SAP Service and Support"). After checking at TX SM59, it was noticed that the RFC connections SAP-OSS y SAP-OSS-LIST-O01 (what are supposed to be created in previous steps by copying SAPOSS connection) were no created. We created them both manually (also tested) and everything was ok. We started the Wizard again, and the same error was obtained. However, it was noticed that the SAP-OSS RFC connection had been deleted. The system log shows the following:
    00789 - Dialog work process  No. 000 - XXXXXX - EQUIPO - 1 - SM_CONFIG_WZ - M_CONFIG_WZ_START - T - Transaction Problem - STSK
    The same scenario occurs every time the above wizard is used.
    It worth to mention that the SAPOSS connection works fine and also, just to perform a test, I was able to download a note correction through the SNOTE transaction.
    Where should I check to see what is causing this connection error? Do I missing a previous configuration step?
    Also, would be very helpful for us to get an step by step reference guide for SM configuration. We want to be sure we are no missing or mixed up anything.
    Thanks so much for your help.
    Regards

    >
    diego77 wrote:
    > We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard.
    Why do you start configuration for SP12, although most current version is SolMan 7.0 EhP1 SPS19?
    What scenarios / functions are you planning to use?
    Best regards,
    Ruediger

Maybe you are looking for

  • Bluetooth mouse losing power every few seconds.

    bluetooth mouse losing power every few seconds. What is the problem and how do I fix it?

  • How to set the PSSigGetSigValueParams.sigMode and subfilter for a PubSec plugin

    Hi, My PubSec plugin, based on DocSign sample, has its  PSSigGetSigValueParams.sigMode value to kPSSigMethodPKCS1 by default. I am creating PKCS7 signatures, but due to this default value i cannot. My questions: 1 - My understanding is that to create

  • Font size adjusting

    hi guys please do nt mind coz i am new in this software i am trying to make the font size larger but i canot coz the font size are disabled and i dont know how to enable it can you please do help me and also when i make any changes to any page specia

  • DSO Analysis Report : Show wrong period

    I have created the new Variant for DSO Selection Programme RFDRRE05 to get the DSO for Credit Representative Group for closed period (i.e. now Period one is going, it should consider period value as 12). For this we created and assigned a Variable to

  • Why Can't I view my photos on my iCloud from my PC?

    Everytime I go to my iCloud Phots wanting to look at my photostream on my PC i get the message "iCloud Photos in not enabled". I haved disabled it and enabled it over and over agin in hopes to clear the message but nothing works. This is really frust