Factory calendar (weekend)

Hello
do you know if PP takes as a factory calendar that is assigned the Centre?
someone know if we can make some parameters for the plant has as working day on Sunday but without any affect to logistic?
Thanks!

Dear ,
I am not clear about your requirement
However , there are two ways you can have Factory calanader for plants :
1.A factory calander at Work Centre inlcuding working days as Sunday or 7 days week ( Monday to Sunday ) as per your requirement ( F1).Goto -OP03-Manitain Calander tab -Slelect your Factory Calander in Change Mode -Goto Details -Mark Sunday as working day and save .Now this particular calender can be re-assinged to Plant in op03 or if you want that your plant having work centre which works 7 days week , you can goto CR02-Work centre -Capacity Tab -Hit Capacity header tab ( cap)-Standard Availale capacity -Assing the FC in Calander Id field .
2.A factory calander not having Sunday/Satday as working day(F2) : Follow the same way as explained in point no 1 but do not mark Sunday or Satday as work day as per your business days and assin the calander in op03-Plant assingement tab.So this calander will followed by all logistcs , sales , mrp pupose where as above on ewill exclusively fo plant -work cetre .
Try and revert
Regards
JH

Similar Messages

Working days between two date fields and Changing Factory Calendar

Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
      IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
      P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO   = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AM

Hi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh

MC44: material usage value affected by factory calendar

Hi Gurus,
I've got the following problem: on my 4.6c R3 production instance factory calendar had been setup as 7 working days a week but recently the need was to change it to 5 working days a week due to the introduction of route calculation to determine correct dates for the sales orders.
We changed the factory calendar (which did deliver the correct result for the sales orders) only to discover that the "Usage" value determined for the materials by MC44 got totally wrong (usage with the 5 working days calendar was approximately 30 to 50% LESS than with the 7 days working calendar !!)
As soon as we did restore factory calendar back to 7 working days a week MC44 was again fine (obviously sales orders date got wrong...).
My impression is that everything is based on the way data from table MVER is determined depending on the factory calendar (which is apparently driven by function module DATE_CONVERT_TO_FACTORY_DATE).
I guess I could change from customizing the calendar for the shipping point: in that case my expectation is that sales orders date should be fine as well as results from MC44 but I'm not totally sure about that.
Any idea ? Do you know which is the way table MVER is populated based on the calendar settings ?
Many thanks in advance for your help.
Enrico

Hi Jurgen,
from the logical point of view sounds reasonable but....
1) even if I didn't fully debug the program (otherwise I guess I would know the answer ) looks like MVER is the only one considered in terms of usage
2) even if you forget point 1 (I could obviously be wrong) you're missing one information that I didn't mention: our usage (or consumption if you prefer) is 98% done from Monday to Friday; sometimes we do something on Saturday but this is kind of an exception.
Based on the above, despite the factory calendar is setup on 7 working days a week, our material usage is basically done on 5 working days a week. Described this way you'll immediately understand that, even if the program reads the data based on the number of working days, changing the calendar from 7 to 5 should cause a decrease of only 2-3%, in our case changing the factory calendar from 7 to 5 working days is causing a decrease of 30% to 50%.
I believe the program is reading the table in a different way based on the factory calendar, I'll try to give you an example:
      Day     Usage
01   Mon       10
02   Tue        20
03   Wed      30
04   Thu        40
05   Fri          50     ---> total week 1 far 150
06   Sat         2
07   Sun        0      -
> total of the weekend 2
08   Mon       100
09   Tue        200
10   Wed        300
11   Thu       400
12   Fri        500     -
> total week 2 1500
13   Sat        6
14   Sun       0        -
> total of the weekend 6
For the 2 weeks, factory calendar 7 working days a week, total usage would be 1658.
In your case, switching to 5 working days a week, it should deliver usage only for Monday to Friday, which is 1658 - (2+6)=1650    (i.e. difference is peanuts)
As I said, I couldn't get to the end of the debug, but my impression was that, switching to 5 working days a week (based on the above example) the program would read 10 "days" so from Monday 01 to Wednesday 10, in that case the total would be 1658 - (4005006) = 752 (now difference is huge...).
So...... maybe main question could be: which is the way MVER is populated ?
Best regards,
Enrico

The factory calendar

Hi Gurus,
I am facing a problem Currently the system is not considering the factory calendar while giving a firm day. For eg, if the firm date is after 20 days, it is not considering the "off-days" in between and treats all the days as working days.
Regards
yogendra

Hi Yogendra,
It would be helpful if you provide the example of what your seeing to help us understand better.
If the system is not considering the holidays or weekends of your organization while proposing for externally procured parts, then it is a normal behavior, as external procurement is based on calendar days & internal procurement is based on work days.
Check & revert if the above answers your query.
Regards,
Vivek

Shipping Date & Factory Calendar

Our factory calendar is set up to block of weekends & holidays correctly. However, when entering sales orders, if we enter a requested delivery date for the customers order to ship on a holiday, the system does not push the date out to the next business day we are open.
Based on searches in the forum I checked the TVST table and see that the shipping point has the correct factory calendar associated with it.
Unfortunately the control of the set up is in Switzerland so I need to tell them exactly what to look for if we need to fix something. Could anyone provide me with guidance where to have them look (or which other tables I could check).
Thanks in advance.
Regards,
Kristine

Hello,
We had a similar issue in Italy.
Check the calendar attached to the Sales Org is any.
Also, another check you can do is to create the delivery for the sales order and check if the delivery date is on the week-end or is it been pushed to the next working day as the calendar for the shipping point is set with week-end as holidays.
For checking the calendar, one can use SCAL transaction.
Cheers
Gaurav.

Vendor Evaluation using Factory Calendar?

Hello,
Can I set up Vendor Evaluation to consider the Factory Calendar when scoring with the Standard Delivery Date Variance?
I have set it up to allow the delivery to score 100% of the points if the delivery is in by 6AM the following day. But this does not work over the weekends.
Thanks,
Matt

Please help.
There must be some way to do this.
If the factory is closed on the weekends and you miss a Friday delivery, even though you could have made the Saturday delivery you have to wait until Monday and SAP scores you as though you were 3 days late instead of the actual 1 day late.
How can I make Vendor Evaluation use the factory calendar?
Thanks,
Matt

To get time differnce based on factory calendar

Dear All,
We have Creation date, time, End date and time. We need to find out the time difference based on factory calendar ..ie need to exculde weekends, holidays.
Is there any FM to get this? Please adivse procedure how to get.
Thanks
Konda Reddy

Try Something like following
PARAMETERS : P_BEGDA TYPE BEGDA,
             P_BTIME TYPE SYUZEIT,
             P_ENDDA TYPE BEGDA,
             P_ETIME TYPE SYUZEIT.
DATA LV_DURATION TYPE F.
CALL FUNCTION 'DURATION_DETERMINE'
EXPORTING
    UNIT                       = 'H' "Hours
    FACTORY_CALENDAR           = 'GR'
IMPORTING
    DURATION                   = LV_DURATION
CHANGING
    START_DATE                 = P_BEGDA
    START_TIME                 = P_BTIME
    END_DATE                   = P_ENDDA
    END_TIME                   = P_ETIME
EXCEPTIONS
    FACTORY_CALENDAR_NOT_FOUND = 1
    DATE_OUT_OF_CALENDAR_RANGE = 2
    DATE_NOT_VALID             = 3
    UNIT_CONVERSION_ERROR      = 4
    SI_UNIT_MISSING            = 5
    PARAMETERS_NOT_VALID       = 6
    OTHERS                     = 7.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE LV_DURATION.

Schedule line and factory calendar problems

Hello experts. I am having some trouble with the schedule lines in our sales orders. There used to be only one schedule line with the requested qty and the confirmed qty. But ever since I configured the factory calender in our shipping poitns, there have been appearing two shipping lines. The first one, with today's delivery date and the requested quantity. The second one with the confirmed quantity and a delivery date a few days in the future. Does anyone know how I can configure so that the shipping lines stay on one line, with today's delivery date?
Here are links to print screens of what is happening:
http://img441.imageshack.us/img441/9159/delivery1eu5.jpg
http://img118.imageshack.us/img118/1561/delivery2ho7.jpg

Hi Edson,
I believe this is a result of your availability check. Now that you have maintained the factory calendars, the lead time takes into account free days vs. working days maintained in the factory calendar.
Example: today's date is 9/27 and your lead time is 5 days
Before you maintained the factory calendars, SAP was assuming all calendar days are working days. Therefore, an order with RDD of 10/2 would be confirmed.
Now let's say you maintain the factory calendar with the weekends free. 5 working days from the 27th is 10/4. Your order will no longer be confirmed unless you change the RDD to 10/4.
Hope this helps,
Rob

Deadline event and factory calendar

Hi,
we use some events like WF_APPR_LATEST_END to send and email notifiction to approvers of a shopping cart. So far it works. But the event deadline did not consider the factory calender!
How can i achive that the determination of deadline date/time consider the factory calender? We do not want to send email notification on weekend and holidays!
Best regards,
Ben

Hello Benjamin,
Have a look at Knowledge Base Article below:
[1467113 - Factory Calendar is not available in SRM|https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1467113&_NLANG=E]
Regards.
Laurent.

E ME 078 Deliv. date outside period covered by factory calendar

Hi,
I create Bid vendor, but the error show E ME 078 Deliv. date outside period covered by factory calendar
I 've checked the factory calender in backend the setting is all day as a working day (doesn't have holidays and weekend days)
pls help me....

this error occurs if u had given a wrong date or very different date pl check for ex if u had given date as 05.08.2028 here at present the year givenas 2028 & in system the year going on as 2008 then in this situation system will give the error as u wrote .pl confirm & reward for efforts .
sap11

Factory Calendar issue in creation of Sales Order/ Delivery Order

Hi all,
There is one issue. Our user is not able to create Sales Order/ delivery order as he is getting the below error message u201CDate 2010-12-27 lies after the end of Factory calendar F1u201D. But when I checked the plant in customization, the Factory calendar assigned is u201CKRu201D and not u201CF1u201D. So I donu2019t understand why this error message is appearing. But when I checked Factory calendar u201CF1u201D, it was valid only up to 2010 and there are special rules also set. Only few days in the year are working days. Factory Calendar u201CF1u201D description says u201CKOR customers billed on the 25th of every monthu201D
Please advice.
Regards,
Brijesh

Dear
If F1 is the correct calander , then goto OP03-Calander Maintenece -select the Holoiday Caleneder and extende the Valaidity till 2020 and also Select the Factory Calander do the same till 2020 .Now Goback to main screen of OP03-Plant asisngement -re-assing the same F1 calaneder .
Secondly check the factory calender of the plant in OX10.Then in SPRO > enterprise structure >Definition > logistic execution>define shipping point .Select you shipping point and assgin the proper factory calender
.Goto OVX5 , choose your sales organization, click on details, Detailed information tab - Sales Org Calendar (maintain your factory calendar here not Sale Org Calander )
.Check in VOV8, use the "Propose delivery date" and "Lead time in Days" options to default today's date as the requested delivery date.
Refer : Public holiday dates issue
Regards
JH

System does not propose the delivery date based on factory calendar

Hi,
I am creating a sales order for a delivery date for this sat which is (2/22/09)
I have maintained 2 separate calendars for
1) shipping point
2) for the route
The route has a transit time of 1 day and the calendar has sat and sunday as non working.
the Shipping point has a pick/pack time of 1 day and the calendar has sat and sunday as non working
The material is available in the warehouse
Now when i create this sales order i enter the delivery date as 2/22/09, the system does not propose me the delivery date of monday (i.e 2/23/09) It accepts the 2/22/09 delivery date.
In the schedule line i do see the date as 2/22/09 only.
The delivery was created with the following dates
Picking = 2/17/09
Transportation Planning = 02/18/2009
Loading =02/18/2009
Planned GI= 02/18/2009
Delivery Date = 02/22/2009
How can the system give me the delivery date of a sunday when the calendar doesnt allow sunday as working day.
Also the route time is 1 day in transit so i am not sure why the system is proposing a 3 day transit time?
Can any one explain the behaviour of SAP for the delivery date logic

Dspsac,
Delivery date can be any date. For instance, if your customer insisted on a Sunday delivery, you would accommodate him, regardless of any calendar.
From the delivery date, the system counts backwards USING THE FACTORY CALENDAR ASSIGNED TO THE ROUTE by the number of days in the route. You have to consult the FC assigned to your Route to determine if the GI date has been properly calculated.
From the GI date, the system counts backward Pick/pack time, using the shipping point calendar, to arrive at Material availability date.
Calculations are explained in SAP online help
[Transportation and Delivery Scheduling|http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/5607e7545a11d1a7020000e829fd11/frameset.htm]
Regards,
DB49

Working day to factory calendar date

Hello Experts,
I wish to get the factory calendar date, specific to a factory calendar, based on a working day.
Basically, if i pass say 4, then i want to get the date for the 4th working day based on a specific factory calendar.
Can someone throw some light on possible function module that i can use in BW ?
Thanks

That's what I was giving you, you give the working day and the factory calendar and you get the date, or you can use this function and you can do it the other way:
(Unless I'm completely missing your point here...)
    CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
    CORRECT_OPTION                     = '+'
    DATE                               = G_WORKAREA3-CREATEDON
    FACTORY_CALENDAR_ID                = L_S_PLANT-FACTCAL_ID
IMPORTING
*   DATE                               =
   FACTORYDATE                        = L_FCDATE
EXCEPTIONS
    CALENDAR_BUFFER_NOT_LOADABLE       = 1
    CORRECT_OPTION_INVALID             = 2
    DATE_AFTER_RANGE                   = 3
    DATE_BEFORE_RANGE                  = 4
    DATE_INVALID                       = 5
    FACTORY_CALENDAR_NOT_FOUND         = 6
    OTHERS                             = 7.
ENDIF.

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

How to find out the Factory Calendar ID used by an Organization

Hi Experts,
I want to know Factory Calendar ID used by an Organization.
Which table store the Factory Calendar information for an organization.
Is there any function module to get the Factory calendar of an organization.
Please help me ASAP.
Point will be rewarded for helpful answers.
Thanks in advance
Kulvendra Kumar

Hi
chk the view v_001p_m
there u can find ur org nization so there u wull find the calender assigned to them.

Factory calendar (weekend)

Similar Messages

Maybe you are looking for