Failed to load shared libaray nilvaiu.dll

Hi
Please can anyone help with this error
"Initializing...
Calculating dependencies...
Checking items for conflicts. This operation could take a while...
Preparing items for download. This operation could take a while...
Deploying rt1.lvproj
Deploying BEENS(successfully deployed target settings)
Deploying rt.virt.vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library nilvaiu.*:get631:C on RT target device.
Deployment completed with errors"
Even after completly reinstalled the software in SBRIO 9642.  I am not able to get rid of this error.  please help me..
Thanks 
Manu S

Dear Sir
I am attaching the screen shot of the project explorer.  nilvaiu.dll file is present in the dependencies of the RT target.  
This what you asked right?
Regards
Manu S
Attachments:
screen shot.JPG ‏57 KB

Similar Messages

  • Failed to load shared library

    I am getting a "Failed to load shared library myDLL.dll:myFunction:C on RT Target Device" error when attempting to deploy a VI which contains a call to myDLL on a RT PXI.  If I open the VI with the Call Library Function Node and simply reselect myDLL within the Library name or Path box and save the VI, it will then deploy without error.  This continues to work until I start changing the VI at which point I attempt to deploy the VI again and get the failed to load error.  Once again I open the VI, reselect myDLL, save, and the failed to deploy error goes away.
    Does anyone have any ideas about whats going on here?
    Thanks in advance
    Kevin C.

    Hi Bob,
    Thanks for responding.  I am running LabVIEW 8.5 and running on an 8106 Embedded Controller.  Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box.  If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue.  I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem.  Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL.  Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
    Thanks again,
    Kevin C.     

  • Failed to load shared library on RT target device.

    I am using 7030 RT target. When I use Call Library Function Node with specified DLL library the application is working properly on Windows target. When I try to download the application on RT target PCI 7030 I get the following error messages: Failed to download useDLL.vi. Failed to load shared library EasyDLL.dll on RT target device. Because the application (attached to the question) is distributed with NI product I would suppose it is written OK. I would like to know what restrictions are imposed on DLL libraries which should be targeted on PCI 7030 RT target. Why the application useDLL.vi with EasyDLL.dll can't be loaded on PCI 7030? Does it mean that Call Library Function Nodes are not compatibel with PCI
    7030 target?! Thank you for any explanation.
    Attachments:
    useDLL.vi ‏15 KB
    EasyDLL.dll ‏80 KB

    OK I downloaded your files and tried them with a PXI real time controller and the error you mentioned happened for me as well. After digging for awhile, here's the best explanation I could find:
    1 - useDLL is calling other DLLs that are failing to download
    2 - useDLL is accessing some of the Win API that is not supported by the RT OS.
    Read more about this at:
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000...
    ~cheers,
    Darin G

  • DAC - Error loading shared library [pmwrtrel.dll] in the dynamic lib mgr

    Hi,
    While executing ETL load on a Windows 32-bit machine with DAC v10.1.3.4.1, we were able to execute 24 tasks out of 317 successfully. Then it fails with the following error message:
    PRE-SESS> TM_6232 Error loading shared library [pmwrtrel.dll] in the dynamic library manager. The error is [Database driver event...Error occurred loading library [pmwrtrel.dll]. System error encountered is 127. Error text is The specified procedure could not be found. .].
    PRE-SESS> CMN_1761 Timestamp Event: [Mon Mar 29 19:04:05 2010]
    PRE-SESS> WRT_8236 Error getting pre session writer object for target [W_ETL_RUN_S]
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Mar 29 19:04:05 2010)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
    READER_1_1_1> DBG_21437 Reader: Source is a file-based source.
    READER_1_1_1> FR_3118 source [SQ_FILE_DUAL] code page: [7-bit ASCII]
    READER_1_1_1> FR_3071 Maximum Line sequential buffer length is 1026.
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Mar 29 19:04:05 2010]
    WRITER_1_*_1> TM_6232 Error loading shared library [pmwrtrel.dll] in the dynamic library manager. The error is [Database driver event...Error occurred loading library [pmwrtrel.dll]. System error encountered is 127. Error text is The specified procedure could not be found. .].
    MANAGER> PETL_24031
    ***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_FILE_DUAL] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_FILE_DUAL] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ETL_RUN_S] has completed. The total run time was insufficient for any meaningful statistics.
    MAPPING> CMN_1793 The index cache size that would hold [7340064] rows in the lookup table for [MPLT_GET_ETL_PROC_WID.LKP_ETL_PROC_WID], in memory, is [29555310648557682] bytes
    MAPPING> CMN_1792 The data cache size that would hold [7340064] rows in the lookup table for [MPLT_GET_ETL_PROC_WID.LKP_ETL_PROC_WID], in memory, is [12948046503805036] bytes
    MANAGER> PETL_24005 Starting post-session tasks. : (Mon Mar 29 19:04:05 2010)
    MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Mar 29 19:04:05 2010)
    MAPPING> TM_6018 The session completed with [0] row transformation errors.
    MANAGER> PETL_24002 Parallel Pipeline Engine finished.
    DIRECTOR> PETL_24013 Session run completed with failure.
    DIRECTOR> TM_6022
    SESSION LOAD SUMMARY
    ================================================
    DIRECTOR> TM_6252 Source Load Summary.
    DIRECTOR> CMN_1740 Table: [SQ_FILE_DUAL] (Instance Name: [SQ_FILE_DUAL])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6253 Target Load Summary.
    DIRECTOR> CMN_1740 Table: [W_ETL_RUN_S] (Instance Name: [W_ETL_RUN_S])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6023
    ===================================================
    DIRECTOR> TM_6020 Session [SIL_InsertRowInRunTable] completed at [Mon Mar 29 19:04:06 2010].
    Kindly someone tell us how to resolve this issue.
    Regards,
    Vishnu

    what BIA version are you on?
    perhaps you have to install a informatica fix or a DAC patch

  • RealTime - Failed to load shared library

    Hi everyone,
    I'm working with the cRIO 9074 system and programmed a ANC application with LabView. Yesterday I tested my application the first time but it didn't work as expected. Because of my testing- and developing-place are different I have to carry the cRIO-System and my laptop between them. So I just disconneted the powersupply and the networkcable. Then 10min later I tried testing again but I got an error. Today in the morning I got the same error like yesterday, which is the following one:
    "Failed to load shared library AdaptivFilter. Ensure that the library is present on the RT target. Use MAX [...]"
    I reinstalled the NI software (more than once) how I was adviced with MAX but it didn't fix the problem, maybe the AdaptivFilters-library was not included.
    In the project-explorer a library called "NI_AdaptivFilter.lvlib" is included and I also found the path of the file on my harddrive.
    It drives my nuts that it worked and than 10min later it doesn't.
    I hope you could help me, thanks.
    Schue
    Attachments:
    project_explorer.PNG ‏71 KB
    Unbenannt.PNG ‏57 KB

    Hi Bob,
    Thanks for responding.  I am running LabVIEW 8.5 and running on an 8106 Embedded Controller.  Unfortunately, I cannot post my DLL however, I did some troubleshooting and found that the issue seems to be that myDLL calls another one of my DLLs which doesn't seem to be loaded onto the RT box.  If I deploy and run a VI which calls this second DLL and then run my original VI, it deploys without issue.  I guess I can understand why it didn't work in first place, since the 2nd DLL is not called from any VI and only called from myDLL, however I don't understand why simply opening the VI which contains the call to myDLL and reselecting it fixes the problem.  Also I have run the DLL thru the 8.5 DLL checker and it says that the DLL is OK, in fact the DLL checker new that myDLL had a dependency on the second DLL.  Is there something that I can do other than pre-deploy the second DLL to the RT box to get around this issue?
    Thanks again,
    Kevin C.     

  • Failed to load function!d3d9.dll Direct3DCreate9

    For some reason after updating mumble when I open skype with mumble running i get an error message saying Failed to load function!d3d9.dll Direct3DCreate9 however if I close mumble completely and open skype it works fine. I can then open mumble after skype is running and there are no issues. This has gotten extremely annoying and I have tried individually replacing the d3d9.dll files (by downloading the directx files directly from microsoft and manually copying them into system32 AND by using their installer) but it didn't change anything. I attatched my dxdiag text log to this post as well. Any help is appreciated

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • CRIO Fails to Load Shared Library

    All,
    I'm getting an odd error every other time I tried to load my code onto a cRIO in the dev environment.
    Deploying NI_AALPro.lvlib:Linear Fit (LS).viNI_AALPro.lvlib:Linear Fit (LS).vi loaded with errors on the target and was closed.
    LabVIEW:  Failed to load shared library lvanlys.*:LinFit_head:C on RT target device.
    This VI works the first time, and then fails to run the second time you hit run.
    If I reboot the device this corrects the problem, but I have to say this bug costs me quite a lot of time.
    Regards,
    Ken 

    xkenneth,
    Did that solve your problem? If so, is it reproducible with a small project?
    Verne D. // LabVIEW & SignalExpress Product Support Engineer // National Instruments

  • Acrobat failed to load it's core DLL

    Whenever I try to open any PDF files on my computer they won't open and I am faced with a window that says Acrobat failed to load it's core DLL.  I've looked online and can't find any solutions that work.  I tried running malware programs, I've uninstalled and reinstalled Adobe Reader, and I've tried to update acrobat but it fails during the updating process and just quits.
    How do I fix this? I need to read my PDF for classes!

    I completely un-installed Adobe Reader X, and installed an older version - Adobe Reader 9.5. Verison 9.5 opened and works fine.   You can download version 9.5 from Adobe's FTP site.  Make sure you download the english version. 
    This was not a malware or virus issue.

  • Labview : Failed to load shared libraries nivision.* in RT

    Hi,
    I am trying to run the Roaming.vi of the Starter kit . i have modified it to show an image in the front panel.But , while deploying it is giving error:
    Failed to load shared libraries nivision. in RT...Can somebody help me with this.
    Thanks,
    Harsha.

    maybe this helps
    http://digital.ni.com/public.nsf/allkb/069945FA0F527D9D86256F880056A15B

  • LabVIEW: Failed to load shared library nisysrpc.out

    Errored were detected in the target log when connecting to the target:
    LabVIEW:Failed to load shared library nisysrpc.out.Ensure that the library is present to the RT target. Use MAX to install NI software or FTP to transfer custom libraries on the target .
    labview 2012
    sbrio 9636
    已解决！
    转到解答。
    附件:
    Shared Library.jpg ‏3797 KB

    这个错误是因为RT系统启动部署时缺失库文件或者加载库文件失败导致的。
    库文件加载失败原因有很多，而且就算把库文件重新添加进去可能也不能解决问题。建议你重装sbRIO 9636的RT系统，RT重装系统很快，10分钟就能完成。
    在MAX里面远程系统下找到你的9636，右键选择格式化。格式化完成后展开9636，右键软件选择更改删除软件，此时把软件再重新装进去就可以了。

  • Acrobat failed to load it's core dll... what's going on????

    I am frustrated that once I downloaded an updated version of Acrobat Reader from Adobe, I can no longer open simple pdf"s.  COME ON. 
    FYI:  It has now taken me more than an hour to get this far thru your "help" maze.  Can I get some assistance????

    http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • Missing nilvaiu.dll when deploying VI

    Hi,
    I have a problem when trying to deploy a .VI to my cRIO 9082.
    The .VI is to control the velocity of a DC engine (KOLLMORGEN) through a servo drive.
    However, whenever i try to deploy the VI i get the error message as follows:
    LabVIEW: Failed to load shared library nilvaiu (see also attached image).
    The dll is present in the tree (see attached image) and i've just reinstalled the DAQmx 9.x.x.
    Anyone have a clue on how to fix this?
    Help is much appreciated.
    Best regards,
    Jakob.
    Solved!
    Go to Solution.
    Attachments:
    Error message.PNG ‏17 KB
    Tree.PNG ‏16 KB

    Is the 9082 running LabVIEW Real-time (RT)? If so - I would suspect that the DAQmx drivers are not installed on the RT target. I'm not entirely sure how DAQmx works with RT targets as it's not something I've used before (and this thread says that you can't use DAQmx on cRIOs - http://forums.ni.com/t5/LabVIEW/DAQmx-driver-support-in-cRIO-Error-fail-to-load-nilvaiu-dll/td-p/112...
    1) Have you checked the software installed on the 9082 (go to max, find your cRIO, click 'software' and then add/remove software) to see if there is an option for installing DAQmx support?
    2) Do you have LabVIEW RT support installed with your DAQmx drivers? There's some information about it here but it seems quite out of date http://digital.ni.com/public.nsf/allkb/79CB44F7E228AED88625756E00445151. I've just taken a screenshot of my DAQmx configuration:
    The other options seem to suggest that it's because DAQmx is corrupted but you said that you've tried reinstalling that. Have you also tried 'repairing' it?
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • Spackle.dll failing to load in Reflector

    I'm working on decompiling a source code in .NET reflector 7.4 however, when I try to add Spackle.dll to my Add-Ins list along with FileGenerator.dll I get the following Error:
    The following add-ins failed to load: 
    C:\FileGenerator\Spackle.dll
    System.InvalidOperationException: Add-in contains no packages.
    Any help would be much appreciated, thanks.

    Hello,
    Welcome to MSDN forum.
    This forum is mainly to discuss the Microsoft build engine aka MSBuild. Topics including: usage of MSBuild, build customization, and MSBuild extensibility via tasks, loggers and hosting.
    Since this issue has much relevance to CLR, I will move it to the related forum for better response.
    Thanks for your understanding.
    Best Regards,
    Jane.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • URGENT HELP NEEDED 'Acrobat failed to load its Core DLL'

    My Adobe Reader was working fine until I needed to open a PDF the other day to which I received this message 'Acrobat failed to load its Core DLL'. I had a problem with it in the past with an error code ending in '142' but I managed to solve this myself. Now this has appeared and I'm stumped. I am currently running windows 8.1 and have the most up-to-date Adobe Reader XI.
    I haven't changed anything to my computer for it to interrupt the program. I have read the forums on here and elsewhere. I have:
    Un-installed and re-installed the program
    Repaired the program through the control panel
    I have run the TDSSKiller from Kaspersky which didn't find anything
    I have previously run Malwarebytes Anti-Malware software including the 'rootkit' option. Unfortunately I fell asleep and so did my computer so I lost everything from the scan (it takes hours for this scan) so I am currently running it today.
    I've conducted other advice that people have suggested on previous forums/discussions but it still hasn't been fixed
    If there is anything I could try then could someone please help me as this is very urgent!
    Thank you so much in advance for any comments or suggestions.

    LauraAnn1994 wrote:
    Thank you for your reply but I have done everything on that page yet it still does not work :/
    Laura,
    In that case the only way is to uninstall the reader completely from the system and then to reinstall it.  The process is to use the Adobe cleaner and this is a free tool from Adobe downloadable from this link:
    <Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs>
    Download the tool and save it on your desktop or in a temporary folder.  then right-click on it and extract the files.  After extracting the files, run the file called: "AdbeArCleaner_v2.exe".  Then follow the simple instructions given on the screen.
    After the uninstall is completed, you need to restart the machine before you can install the reader again. 
    Hope this helps but please post back if this didn't work so that further help can be given.

  • When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

    When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

    You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

Maybe you are looking for