Failed to lock pinned key...

Hi Guys,
     Coherence 3.3.1/389
     .Net API 3.3.1.2
     I have many lines in Coherence log like this
     2007-10-05 13:32:54,450 ERROR - [Coherence] - 2007-10-05 13:32:39.446 Tangosol Coherence DGE 3.2.2/371 <Error> (thread=DistributedCacheWorker:0, member=10):
     Failed to lock pinned key: Binary(length=9, value=0x0341A7EAFA2E000000); partition 6; pinned PartitionSet[5, 6, 7, 15, 16, 17, 18, 19, 21, 22, 38, 39, 40, 41
     , 95, 97, 98, 159, 160, 161, 162, 224, 225, 226, 227]
     What do they mean and why are so much of them?
     Regards,
     Dmitry

Hi,
     I've got it on new one 3.3.1
     2007-10-19 11:24:49,116 ERROR - [Coherence] - 2007-10-19 11:23:04.023 Oracle Coherence GE 3.3.1/389 <Error> (thread=DistributedCacheWorker:3, member=3): Failed to lock pinned key: Binary(length=9, value=0x0341A7F5E686000000); partition 92; pinned PartitionSet[89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 100, 101, 103, 104, 106, 107, 108, 109, 110, 112, 114, 115, 117, 118, 119, 121, 122, 123, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 256, 257, 258, 259, 428, 432, 520, 522, 524, 586, 600, 604, 938, 942]
     After many lines like above the cluster is restarted.
     What do they mean?
     Regards,
     Dmitry.

Similar Messages

Enter your system lock pin code to unlock this mac

I just traded my Macbook Pro for a 27" Core i5 iMac. I wiped the iMac when I traded and I brought it home to do a full reinstall. I booted holding the Option key down and noticed this iMac had a recovery partition I opted to use the recovery partition to reinstall. To my surprise it was Lion. And the cd was snow leapord. I was cool with that and signed in and used the computer all day. Then sometime while I was sleeping a obnixious alarm went off on the iMac and there was a box to enter your system lock pin code to unlock this mac.
Priding myself on doing all repairs on my own since my primary job is reinstalled and virus removal. Long story short I could not access anything no matter what I tried. I ended up calling apple care and asking what needed to be done they explained I needed to bring it to a apple authorized store and they would have to unlock the firmware.
Do you guys know what they are talking about or is there anything I can do before driving 100 miles to my nearest apple store. I find this rediculous.

I did indeed did wipe the system clean at the owners house, I went home with what I thought was totally clean hard drive, there was a recovery partition I did not see until I got home. This recovery partition was indeed tied to the original owner which I did not know at the time. I assumed it was like any old windows recovery and it was clean and made reinstalls a dream. Well long story short I had the snow leapord cd in the drive and ready to go until I seen this recovery partition and I opted to use the **** recovery and I reinstalled registered and signed into everything and used the computer all day 12 hours probably. By the way the recovery partition that was tied to this guy was lion.
So then I left the computer on and went to sleep. Late last night an alarm went off and that is when I saw the enter the pin to unlock this mac. I have tried holding the C when I boot up, I have tried holding the Option key when booting up. I have tried resetting the pram. Nothing can be done. I can get to another lock screen by phsically unplugging the power cord then booting up holding the option key. That will bring me to a screen with nothing but a lock and a line that I can type some kind of admin password. Nothing I have with work. I tried, root, admin, administrator, my password I used when I set lion up. Nothing!!!!!.
At this point this machine is more or less 100% useless, the only option I can see is to bring it to a authorized apple retailer and have them fix it. I did bring it to a local apple store. And they said they could probably fix it, but I would have to pay them between 50-100 dollars. The repair guy said something about getting the info from the ram. I just laughed and left.
Anyway this is like a BIOS lock, you cannot get to terminal, cd, to any boot options, you cannot reset anything at all. It's a full lock.

SDO gives JBO-26030: Failed to lock the record, another user holds the lock

Hi,
I have a question thats on the boundary between ADF and BPEL but I posted in this forum because its highly related to ADF Model with Service Interface.
We have a BPEL batch process that spawns multiple child BPEL processes that handle threads inside the batch in parallel. These child processes all update the same batch record in a database with for example the lastActionDateTime. We do this by invoking an update service on a SDO application that we built following this tutorial: http://jianmingli.com/wp/?p=2838
It all works good but sometimes when updating the same row from multiple BPEL process instances at the same time, we sometimes get a SDO JBO-26030: Failed to lock the record, another user holds the lock.
I'm a bit stunned by this, because all we really do is updating a record. From BPEL we just invoke the updateBatch webservice method of the Service Interface.
I can imagine that there will be wait time when these updates come in at the same time, but I didn't expect an exception would occur. Also the arbitrariness confuses me. If a child process would lock the record, I would expect this error to happen always and not at random.
From BPEL the error displays as follows:
     <fault>
          <bpelFault>
               <faultType>1</faultType>
               <ServiceException>
                    <part name="ServiceErrorMessage">
                         <tns:ServiceErrorMessage>
                              <tns:code>26030</tns:code>
                              <tns:message>JBO-26030: Failed to lock the record, another user holds the lock.</tns:message>
                              <tns:severity>SEVERITY_ERROR</tns:severity>
                              <tns:exceptionClassName>oracle.jbo.AlreadyLockedException</tns:exceptionClassName>
                         </tns:ServiceErrorMessage>
                    </part>
               </ServiceException>
          </bpelFault>
     </fault>However when I dive into soa_server1-diagnostic.log I see the following exception:
[2011-10-28T17:37:37.770+02:00] [soa_server1] [ERROR] [] [oracle.jbo.server.svc.ServiceJTATxnHandlerImpl] [tid: [ACTIVE].ExecuteThread: '8' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: a1484c49db38e963:-581f01fc:13345d7173d:-8000-00000000000322f4,0:1:0x5f5e2bf:33] [WEBSERVICE_PORT.name: ECMControllerSDOServiceSoapHttpPort] [APP: ECMControllerSDO] [composite_name: ECMProcessController] [component_name: ProcessControllerBPEL] [component_instance_id: 240335] [J2EE_MODULE.name: ECMControllerSDO] [WEBSERVICE.name: ECMControllerSDOService] [J2EE_APP.name: ECMControllerSDO] [[
oracle.jbo.RowInconsistentException: JBO-25014: Another user has changed the row with primary key oracle.jbo.Key[CDS_20111028_8 ].
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1077)
     at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:553)
     at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8134)
     at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:5863)
     at oracle.jbo.server.EntityImpl.beforePost(EntityImpl.java:6369)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6551)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3275)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3078)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2088)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2369)
     at oracle.jbo.server.DefaultJTATxnHandlerImpl.commit(DefaultJTATxnHandlerImpl.java:156)
     at oracle.jbo.server.svc.ServiceJTATxnHandlerImpl.commit(ServiceJTATxnHandlerImpl.java:216)
     at oracle.jbo.server.svc.ServiceJTATxnHandlerImpl.beforeCompletion(ServiceJTATxnHandlerImpl.java:124)
     at sun.reflect.GeneratedMethodAccessor2677.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.jbo.server.svc.WLSContextCrossAppProxy$WLSCrossAppProxy.invoke(WLSContextCrossAppProxy.java:66)
     at $Proxy377.beforeCompletion(Unknown Source)
     at weblogic.transaction.internal.ServerSCInfo.doBeforeCompletion(ServerSCInfo.java:1239)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1214)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:116)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1316)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2132)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:272)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:239)
     at weblogic.ejb.container.internal.BaseRemoteObject.postInvoke1(BaseRemoteObject.java:625)
     at weblogic.ejb.container.internal.StatelessRemoteObject.postInvoke1(StatelessRemoteObject.java:49)
     at weblogic.ejb.container.internal.BaseRemoteObject.__WL_postInvokeTxRetry(BaseRemoteObject.java:444)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:53)
     at nl.kpn.ecm4crm.am.server.serviceinterface.ECMControllerSDOServiceImpl_51vl7y_ECMControllerSDOServiceImpl.updateBatches(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
     at $Proxy373.updateBatches(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:355)
     at oracle.j2ee.ws.server.jaxws.ServiceEndpointRuntime.processMessage(ServiceEndpointRuntime.java:196)
     at oracle.j2ee.ws.server.jaxws.JAXWSRuntimeDelegate.processMessage(JAXWSRuntimeDelegate.java:479)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1187)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:1081)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:581)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:232)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:192)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:459)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.jbo.server.svc.ServiceContextFilter.doFilter(ServiceContextFilter.java:78)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)Thank you for reading, any directions suggestions on how to solve this will be highly appreciated.
regards,
Gerben

Thanks Frank.
Already tried that , please let me know if there is any other way to get this .
This is being discussed here :
Re: Update without No wait
and i am following what John Stegeman has suggested.

Bit Locker Recovery key lost

hi,
i recently formated my system. i lost my bit locker recovery key.
how to remove bit locker to the drive.
i tried these....
C:\Windows\System32>manage-bde -status J:
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
[Data Volume]
Size: Unknown GB
BitLocker Version: Windows 7
Conversion Status: Unknown
Percentage Encrypted: Unknown%
Encryption Method: AES 128 with Diffuser
Protection Status: Unknown
Lock Status: Locked
Identification Field: Unknown
Automatic Unlock: Disabled
Key Protectors:
Numerical Password
External Key
External Key
C:\Windows\System32>manage-bde -protectors j: -get
BitLocker Drive Encryption: Configuration Tool version 6.1.7600
Copyright (C) Microsoft Corporation. All rights reserved.
Volume J: [Label Unknown]
All Key Protectors
Numerical Password:
ID: {CA7EA469-38CE-4E7E-814D-292A06DF8819}
External Key:
ID: {D70EAC47-DEBB-480A-BFFC-E74479BDDBC1}
External Key File Name:
D70EAC47-DEBB-480A-BFFC-E74479BDDBC1.BEK
External Key:
ID: {2BD85A61-C76F-4433-8DE6-48651047AF6C}
External Key File Name:
2BD85A61-C76F-4433-8DE6-48651047AF6C.BEK
C:\Windows\System32>
how to solve these. help me

Hi，
If you lost recovery key and are unable to access the disk at this moment, then I'm sorry but I have to say that you're lost. If the data in that encrypted drive is very important for you, then you might need a data recovery center to help you.
Yolanda Zhu
TechNet Community Support

HELP ME PLEASE MY MAC IS ASKING FOR A SYSTEM LOCK PIN CODE AND I NEVER SET ONE HELPHELP HELP

ok so i tried enabling iCloud/Find my mac onto my macbook pro,and it restarted to finalise the process,but when it started back up its asked me for a system lock pin code,though i never set one???? please help omg im crying

Here's my guide: How to: Unlock System Lock PIN Code

The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

H,
Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
Event 1001
Op Code NLS initialization
The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now.
I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
How do we ascertain the cause of this error and the specific registry key that might be problematic?

Hi,
This could be caused by firewall rules or security softwares.
http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
And in addition, the fix is worth a try.
Nothing happens when you double-click "Region" in Control Panel
http://support.microsoft.com/kb/2958845
Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

HT201365 How can I get around the system lock pin code if I dont know what it is? I have my username and passwork

I have switched on my MAC after 2 months of no use and I am getting the grey screen asking for a system lock pin code, I dont know what it is, how can I get into my MAC?
Many thanks
Graham

That sounds like it's requestion the Find My Mac passcode. If you don't know it, you'll have to take it to a nearby Apple store with proof of purchase/ownership as only they can unlock it for you.

Real Estate Lock Box Key

I have owned three Palms and now on my 4th.
The very first one,second one and third was able to be integrated with the software/programming to be installed into my phone for the ability to open realtor lock boxes. ALL Palms have infrared so once installed at my local board of realtors I am good to go and I simply access the program on my Palm point the phone at the lock box and it opens... among other functions but this is the one most used.
Now I have just purchased a new Palm Pre and ONCE AGAIN I am told by GE Security that the NEW Palm will not function as a lockbox because of it's operating system. IS THIS TRUE ARE ARE THEY TELLING ME THE SAME THING THEY HAVE DONE IN THE PAST BECAUSE OF EITHER SOMETHING BETWEEN THE TWO COMPANIES IS LACKING IN GETTING THE PRODUCT READY OR IS IT TRUE THIS NEW PRE WILL NEVER BE COMPATIBLE FOR LOCK BOX KEY USAGE?
Need help... don't think this is a question for tech support in India!

Currently, realtors can use Blackberries to access supra lockboxes by using bluetooth technology and a fob which converts the bluetooth signal to an infrared signal. Will we soon have this capability with Palm Pre? I want to upgrade from my Palm Centro to the Palm Pre Plus, but may have to go with a Blackberry instead. Any information you can provide will be greatly appreciated!
This post desribes the situation well: https://developer.palm.com/distribution/viewtopic.php?f=11&t=364&view=previous
Consider this another request to enable the Pre for compatibility with the GE Supra eKey. For years Realtors have utilized the Treos as their Smartphone of choice due to its ability to unlock the lockboxes that hold the keys to the homes we show. Currently no such application is available for the Pre because the SDK stifles access to the Bluetooth interface that is needed to communicate with the lockboxes. Here is what the eKey people say regarding the issue:
"Unfortunately at this time support for the Palm Pre is not possible. The Palm Pre is the first device to use Palm's new "WebOS", and the Software Development Kit (or SDK) available at this time does not include adequate access to the Bluetooth interface on the phone. Because of this, and because the Palm Pre does not have an infrared port on it, we will not be able to certify it as an eKEY device. Hopefully in a future version of the SDK, the required Bluetooth Access will be made available to our programmers so that we can support this device."
Just about every Realtor I know uses a Palm phone, but now people who want to update and upgrade their phones are jumping ship to Blackberry due to this single issue. I'm sure that I don't have to remind you that Brand Loyalty is incredibly hard to earn, and everyday that the Pre does not have this function you will lose valuable customers and an entire niche of users.
I know that I am not the first to make this plea, but of all the research I have done, I have yet to find a response or even an acknowledgment from Palm. Please advise.

TIME dimension processing fails saying "..attribute key cannot be found.." in EPM 10

After upgrading from version 7.5 to EPM 10, when we ran a ‘Full Process’ on the TIME dimension, it ran into an error saying “Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_tblFactCapEx', Column: 'TIMEID', Value: '20090013'. The attribute is 'Time_TIMEID'. (1/13/2015 2:41:02 PM)”.
Full error message is attached herewith – ‘Time Dimension Error.txt’
After researching, we did discover that MONTHNUM needed to be converted to BASE_PERIOD. Re-processed which produced the same error.
Prior to migration to version 7.5, we ran a full process on TIME dimension there. It completed successfully, confirming the issue is only with version 10.
Confirmed we could see the TIMEID value of 20090013 in the following places:
Time Dimension in the appropriate TIMEID attribute column.
Confirmed mbrTIME table had base member ID with TIMEID attribute filled out correctly.
Data in tblFactFINANCE could be pulled using that TIMEID
We truncated all the records in all the fact tables associated to this TIME dimension.
Eventually, when none of the tables had any records, the TIME dimension then processed successfully.
We this began to suspect the issue may not really be related to bad records.
We conducted one more test to confirm this.
Using an input form in EPM 10, we manually entered data in one of the models (at this point none of the fact tables have any records)
Ran Full Optimize on that model with Compress Database and Index Defragmentation checked – This step failed with the error attached in ‘MatrixRateFullOptimize.txt’
Ran Full process on Time Dimension – Failed indicating issue with TimeID 2012001 (that’s my manual entry). Attached error report ‘TimeDim Error MatrixRate.txt’
At this point, the table only contains the manually entered records (no suspected bad records)
We then suspected there could have been an issue with the upgrade process.
So we reprocessed all the dimension and optimized all the models in version 7.5, made a new backup and restored it to version 10.
The issue still persisted!
At this point, we have tried all the possibilities we could think of. Each time the fact table is populated with records, the TIME dimension process fails indicating ‘the attribute key’ cannot be found.
There is probably something in the OLAP partition that is not able to link the dimension attributes to the cubes.
Additional Information:
Please find attached the existing Time Dimension – TimeDimensionMembers.xlxs
Version of Excel used: Excel 2007, SP3 MSO (12.0.6683.5000)
System Specs: Please see screenshot below.

Thank you all for responding! This issue is resolved.
Here’s what the issue was:
The time structure is TOTAL >> Years >> Quarters >> Months (e.g. T.ALL >> 2012.TOTAL >> 2012.Q1 >> 2012.P01)
As shown in the screenshot below, the LEVEL for ‘T.ALL’ member was set to YEAR, which is incorrect (we can’t have Year rolling up to a Year)
We changed the LEVEL to ‘TOTAL’ and this fixed the issue!!
If only it gave a better error message than the “..attribute key not found” message

Import package creation failed (name locked)

Hello!
When I import a package, one of the objects in ‘Import Results’, have the ‘Action’ 'Creation failed (named locked)'.
I have search the database for the same name:
select * from dba_objects where object_name = 'ADDRESS_HISTORY'
But no rows returns.
ADDRESS_HISTORY is a function in the package. In the "Import Results" it exists twice. In the beginning with Action 'No change' and in the end as described above.
ADDRESS_HISTORY only occurs once in the package.
Why do I get the message 'creation failed (name locked)'?
Best regards,
Tina N Mörnstam

I had to remove the function from the package, make an import. Rewrite the function in the package again and then redo the import.
Tina

Keyboard short cut to lock keyboard keys

I know there is a short cut on the keyboard to lock the keys so you can dust or not have someone or an animal accidently activate them. It has something to do with hitting to keys on the keyboard or hitting one of the keys 5 times in a row. I just cannot remember what it is right now.

edit: You can also see the default shortcut for switching, and change it on this page as well.
I guess I could have elaborated more. Shown on that preference panel is the default setting, that are turned off by default. Clicking on the Keyboard Shortcuts link takes you to this window
You can see that you can use a key combination to step thru the list of activated input languages. Backwards= CommandSpace, Forwards=OptionCommandSpace. But when you check to activate them you will see that there is a conflict with Spotlight. You cannot customize these shortcuts, so you have to pick either Spotlight or Text Input Source.

What os a system lock pin

I was watching a movie on my MacBook Pro 13" Early 2011, when the whole display freezed, I tried to force quit but it didn't work and then i held the start button until my laptop switched off. I pushed the start button again and after the laptop switched on a "Enter Your System Lock PIN code to unlock this Mac" appeared. I haven't typed any PIN code when i was creating my user... What should I do?

see this thread:
https://discussions.apple.com/message/20227706#20227706

TS2570 system lock pin

I restar the computer and now it say "Enter uoy Sustem Lock PIN to unlock this mac
What it this ?

This is where Google helps:
https://encrypted.google.com/search?q=%22Enter+your+System+Lock+PIN+code+to+unlo ck+this+Mac%22&as_qdr=all&newwindow=1&num=100

HT204053 enter your system lock pin code.what o do?

please help

If you are not the ownership of this Apple device, you should drop off this device at any Apple store or any police station. Do Not trying to unlock this device by retrive a system lock pin code.

Db_associate fails with : Lock table is out of available lock entries

Hi
Occasionally on startup my app needs to rebuild its secondary database, so I call db_associate with DB_CREATE set. If the primary db is large the associate fails with "Lock table is out of available lock entries". Both databases are hashes, so I have not configured any special lock sizes as I didn't think I needed to.
What lock configuration does db_associate need to succeed?
I am using version 4.7.25
Thanks
Ashley

Hi Ashley,
You should be sizing the locking subsystem with high enough values so the secondary database rebuilds successfully, then run the "db_stat -C" utility and see how many locks, lock objects and lockers did you need to perform the operation and reconfigure the locking subsystem with values slightly bigger than what you needed, so you make sure that you'll have enough resources for the next time you'll rebuild the secondary.
"Lock table is out of available lock entries" means that the Berkeley DB locking subsystem has not been configured for enough locks. For more information, see the "Configuring locking: sizing the system" section of the Berkeley DB Reference Guide, included in your download package and also available at:
http://download.oracle.com/docs/cd/E17076_01/html/programmer_reference/lock_max.html
To see what locks are held in the database environment at any time, you can dump the lock table using the -Cl options:
% db_stat -h [database environment directory] -Cl -N
Additional documentation:
db_stat: http://download.oracle.com/docs/cd/E17076_02/html/api_reference/C/db_stat.html
set_lk_max_locks: http://download.oracle.com/docs/cd/E17076_01/html/api_reference/C/envset_lk_max_locks.html
Bogdan Coman

Failed to lock pinned key...

Similar Messages

Maybe you are looking for