Fatching Schema Password into Forms

We want to get information about fetching password of database
user / password / connect string in to forms for dynamic
connection . This will also facilitate in case of the password
is changed by DBA and should reflect to the application
dynamically without changing existing code for connect string.

The passwords are kind-of encrypted and there's no facility to
decrypt them. Actually, there is an algorithm that generates a
hash-value (number) for the given password. Aparently the hash-
value generating algorithm is one-way and there doesn't appear
to be an inverse function that would return the password when
receiving the hash-value as in param.
Otherways, once on is logged-on in forms, he may use the
get_application_property built-in to get the username, password
and connect string and some other things.

Similar Messages

  • How do I stop Firefox entering my username and password into other fields on pages that are not the log-in page?

    On a website I need for my work, I must log-in with username & password. Firefox remembers my name & password perfectly. However, in another section on that same website, when I am filling in calendar information, it enters my my username in the "Location" field. Unfortunately, that is my work ID which is confidential. When I don't notice, it posts it on the very public calendar. Also, it enters my password into a password field (masked), so that no one can rsvp.
    It doesn't appear that I can edit the Saved Passwords/Exception in Firefox Options, so I am looking for suggestions!
    I want the saved name password at http://workname.com
    but not incorrectly at http://workname.com/info/*.*

    If there is a password field on a web page and you have saved a password then Firefox may try to fill that password and enter the name in the field just above that password field.
    You can look at:
    * Saved Password Editor: https://addons.mozilla.org/firefox/addon/60265
    *Form History Control: https://addons.mozilla.org/firefox/addon/12021
    You may want to disable saved form fill to prevent Firefox from filling the name.
    * [[Form autocomplete]]
    * http://kb.mozillazine.org/Deleting_autocomplete_entries

  • When logged into forms webpage getting Internal server error

    hi all,
    recently we have configured reverse proxy setup to access portal from internet and now after logging into forms i am getting Internal server error where portal is the virtual host name https://portal.localdomain.com/forms/frmservlet?config=sso_form. the error which i am getting is
    (the server encountered internal error or misconfiguration and was unable to complete your request. error may be available in server log
    oracle application server 10g/10.1.0.2. oracle http-server server at portal.localdomain.com port 443)
    following are the errors
    Apache/Apache/logs
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[0]: Accept, header_value[0]: */*.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[1]: Accept-Encoding, header_value[1]: gzip, x-gzip, compress, x-compress.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[2]: Accept-Language, header_value[2]: en-us.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[3]: Connection, header_value[3]: Keep-Alive, TE.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[4]: Host, header_value[4]: rlap1s2k.poloralphlauren.com:7788.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[5]: TE, header_value[5]: trailers, deflate, gzip, compress.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[6]: User-Agent, header_value[6]: Mozilla/4.0 (compatible; MSIE 6.0; Windows).
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1000): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0040: Request: header_name[7]: Oracle-ECID, header_value[7]: 1224810459:10.98.35.34:897262:0:75,0.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1053): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0044: Request: query string: type=System.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1078): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0045: Request: jvm_route: e3iQch8KbN4Re34SahuQaNaNaO1ynknvrkLOlQzNp65In0.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1240): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0050: Request: env_name[0]: OC4J_UNPARSED_URI, env_value[0]: /webapp/servlet/EMDServlet.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1253): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0109: Request: ajp13 command: FF.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1270): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0098: Have successfully sent out all the ajp13 headers to the web container.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1859): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0063: Response status line: 200 OK.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1862): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0064: Response number of headers: 5.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1898): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0067: Response header_name[0]: Date, header_value[0]: Date: Fri, 24 Oct 2008 01:07:39 GMT.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1898): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0067: Response header_name[1]: Content-Type, header_value[1]: text/html.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1898): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0067: Response header_name[2]: Content-Length, header_value[2]: 14.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1898): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0067: Response header_name[3]: Set-Cookie, header_value[3]: JSESSIONID=0a62232230d76881608e0f264a5db01fd8741646fd2b.e3iQch8KbN4Re34SahuQaNaNaO1ynknvrkLOlQzNp65In0; path=/webapp; secure.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(1898): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0067: Response header_name[4]: Cache-Control, header_value[4]: private.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(752): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0034: After handling ajp13 response message, got a returned value: 0.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(752): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0034: After handling ajp13 response message, got a returned value: 0.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ajp13_worker.c(752): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0034: After handling ajp13 response message, got a returned value: 5.
    [Thu Oct 23 21:07:39 2008] [debug] oc4j_ac_worker.c(391): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0122: Serviced request with network worker: home_15.
    [Thu Oct 23 21:07:39 2008] [debug] mod_oc4j.c(786): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0014: Serviced the request by worker: home.
    [Thu Oct 23 21:07:39 2008] [debug] mod_oc4j.c(807): [client 10.98.35.34] [ecid: 1224810459:10.98.35.34:897262:0:75,0] MOD_OC4J_0374: Response was started, returning OK.
    [Thu Oct 23 21:07:44 2008] [debug] mod_osso.c(3998): [client 127.0.0.1] [ecid: 10.98.35.34:66740:1224810464214:1483,2] \n[OSSO] ===== REQUEST =====\n[OSSO] GET /dms0/Spy?format=tbml&operation=get&value=false&units=true&description=true&version=9.0.4 HTTP/1.1\n
    [Thu Oct 23 21:07:44 2008] [debug] mod_osso.c(367): [client 127.0.0.1] [ecid: 10.98.35.34:66740:1224810464214:1483,2] \n[OSSO] D26: process_idle_time()\n
    [Thu Oct 23 21:07:44 2008] [debug] mod_osso.c(808): [client 127.0.0.1] [ecid: 10.98.35.34:66740:1224810464214:1483,2] \n[OSSO] D03: update_request()\n
    [Thu Oct 23 21:07:44 2008] [error] [client 127.0.0.1] [ecid: 10.98.35.34:66740:1224810464214:1483,2] File does not exist: /u01/oracle/midtier/Apache/Apache/htdocs/dms0/Spy
    J2EE/OC4J_BI_Forms/application-deployments/formsapp/OC4J_BI_Form~island-1/application.log
    08/10/23 19:42:31 formsweb: Started
    08/10/23 20:27:33 formsweb: Stopped
    08/10/23 20:27:33 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
    08/10/23 20:27:39 Started
    08/10/23 20:27:44 formsweb: jsp: init
    08/10/23 20:27:44 formsweb: frmservlet: init
    08/10/23 20:27:44 formsweb: FormsServlet init():
    configFileName: /apps/oracle/Prd/midtier/Prd_midtier/forms/server/formsweb.cfg
    testMode: false
    08/10/23 20:27:44 formsweb: Started
    server.log
    08/10/23 23:44:13 Published an event: C_101.98.3.35.2164a99a.11c5210156f.-8000#usncpas2k.localhost.localdomain.com#181863334#D#OC4J_BI_Forms#default_island&localhost.localdomain.com&HTTP:localhost.localdomain.com#12504&RMI:localhost.localdomain.com#12404&JMS:localhost.localdomain.com#12605
    default-web-access.log
    [23/Oct/2008:23:50:00 -0500] "GET /reports/rwservlet/pingserver HTTP/1.1" 200 3

    Hi Matt,
    Thanks for you answer.
    Yes, I agree error log is not that helpful.
    There are no errors or any log for that matter in IDM Console side, so I am guessing that error is occurring entirely in Java side.
    I am trying to reset password for ABAP and IDM UI.
    Backend is IDM UME.
    Thanks
    Aditi

  • Accessing Multiple Identical Schemas from Single Form

    Hi,
    I'm working with oracle 9i.
    My question is as follows:
    If one has muliple schemas that are all identical, is it possible to setup an oracle form (Oracle Forms 9i) that is able to switch between schemas by selecting the schema from an objecton the form like a drop down list etc..I'm wondering if it is possible to design 1 form that can be used to access all schemas from a single logon. if so, how would I go about doing this? Any help would be greatly appreciated!
    I hope my question above is clear. If not I am happy to supply more info.
    Kind Regard,
    Damian

    Your question is not very clear. Of course your logon will determine which schema. If you want to switch schemas, when the form is already running then you can use ALTER SESSION as Aleksandar indicated, but I would not recommend using it unless all form changes were committed. Another alternative is to create another session in the same schema by using OPEN_FORM, then logout of schema in this second session and login into new schema.

  • Password-protected form autocompletion was available on PC, not on MAC?

    I just switched from PC to iMAC. I was able to autofill password-protected standard info into forms on the PC. I think this was a Firefox function. Is this supported for the MAC?

    *Autofill Forms: https://addons.mozilla.org/firefox/addon/4775

  • Connect Notifications - Add user password into the email?

    When creating a training notification for a curriculum, do you have access to add the user password into the email? I know this is not a great idea for security purposes, but we have a few cases where we may need to do this. Fields are available to add using the brackets like {description}. So I was wondering if user password is available to use.

    setRequestProperty essentially modifies the http-headers sent to the server.
    You play with headers named Username and Password - these do not exist in the standard (see http://www.w3.org/Protocols/rfc2616/rfc2616.html).
    It is not too unlikely that the server you want to connect to uses the so-called "Basic" authentication scheme.
    In that case (see http://www.ietf.org/rfc/rfc2617.txt) you have to add a header looking like
    setRequestProperty("Authorization", "Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==")
    where the cryptic character sequence is just the base64 encoding of username:passowrd (in fact here it is "Aladdin:open sesame").
    hope this helps
    hagman
    P.S.: I think this page shows some code that looks like what you are up to:
    http://home.tiscali.nl/~bmc88/java/sbook/045.html
    Edited by: hagman on Oct 9, 2008 8:26 AM

  • HT3964 When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.

    When typing into forms, such as filling out a contact sheet on a website, my first few letters will not appear when i start typing. For example, if I wanted to type "explanation", i might end up with "laxation". This happens in all browsers.
    If i backspace everything and start typing again in the same area, it will work properly the second time.
    I am using a ~7 month old macbook air with mavericks.
    Any tips to get rid of this issue would be greatly appreciated.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d; s/^ */   /; s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//p;};/^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/(.*: )(.*)/ \(\2\)/;H;};/Apple|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(awk '/^D/{print $2; exit}' "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=\* || e=; echo $d ${f%_$d*} ${f##*.} "$e"; done | tail`; Pm "${A[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|Throt|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed -E 's:/Users/[^/]+/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test will take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Unable to import the excel template into form in HFM

    Has any one came across this issue that I am facing now?
    I have a form in HFM and I exported the form to Excel and the export works fine. but when I import the excel template into form, it was not successful. I have 250 rows in the template. I deleted 50 rows and tried to import and it worked fine . Is there any row limit on this?
    Below here is the error message that I am getting
    An error occured. Please contact your administrator
    Error Number: - 2147467259
    Error Description:007~Unexpected error~The function returned |.
    Error SOrce: request Object
    Page on which error occured:/hfm/data/processImportWdeffromExcel.asp
    I appreciate any ideas on this

    What version of HFM and Excel?
    Make sure you honor the file extension requirements for 2007 docs and import the same as they are exported.

  • My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    Then try DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • MS Word smart quotes don't paste the same into Forms 10g as Forms 6i

    Hi all,
    I have users who write text in Microsoft Word and then cut-and-paste it into Oracle Forms.
    After some prodding by the developers, the users have switched to using the 10G version of their application instead of the 6i version.
    As a background you should know that Microsoft Word uses Smart Quotes by default, which you can turn off. Smart Quotes are different ascii characters than the ascii 39 single quote and ascii 34 double quote.
    When the users cut-and-paste the Microsoft Word text into the Forms 10G field, the single apostrophe smart quote does not convert to ascii 39. I wouldn't be surprised about this except that in Forms 6i the form does convert the single apostrophe smart quote into ascii 39.
    So if the users use the 6i Form they can cut-and-paste and the form/database has the character as ascii 39. If the users paste into Forms 10G then the database shows the character as ascii 191 (hex 0xBF), which is an inverted question mark.
    Does anyone know of any settings in Forms 10g to revert back to 6i functionality for this?
    Thanks much,
    Troy

    I am afraid that Jan is right.
    And this might be a bit of a hassle, since it might affect your forms. If you are using some standard Windows lettertype in your forms, though, you should be OK.
    Bare in mind, that you the NLS_LANG.characterset will have to be compatible between database and forms (the latter at both compiletime and runtime).
    Good Luck!
    Remco

  • I created an apple id online on my computer, all is well and it is functional, however when i enter this same id and password into my iphone 5c it continues to ask me to sign in. Any suggestions on what i need to do?

    I created an apple id online on my computer, all is well and it is functional, however when i enter this same id and password into my iphone 5c it continues to ask me to sign in. Any suggestions on what i need to do?

    I created an apple id online on my computer, all is well and it is functional, however when i enter this same id and password into my iphone 5c it continues to ask me to sign in. Any suggestions on what i need to do?

  • If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also?

    If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also? My laptop got stolen so I changed my password and wanted to be sure it's safe to enter in the new one on my phone. I don't want it to snyc to my laptop.

    Hi loro,
    Thanks for visiting Apple Support Communities.
    I'm sorry to hear that your laptop was stolen. Changing your password was a good step. 
    Entering your new password on your iPhone will not affect the laptop, as mentioned in this article:
    Apple ID: Changing your password
    http://support.apple.com/kb/HT5624
    The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
    Best Regards,
    Jeremy

  • HT201320 How do I enter a new password into my ipad mini?

    My BtYahoo account was "compromised" on the evening of 4th Feb......it affected tablets etc.   As requested by BT Internet I changed my password and did all the other listed checks without finding anything untoward.  I can use my desktop and iphone, but I don't know how to put the new password into my ipad mini.  I tried deleting the old password from mail etc in settings, and putting the new one in, but still can't send mail.  I'm assuming the password is the problem....I'm sure that there must be a correct way of changing it that I haven't discovered.   Help please!   Ariesowl

    I'm not familiar with BtYahoo specifically, but generally speaking, there are two passwords for an email account.  One is for receiving and one is for sending email.  Check Settings > Mail, Contacts, Calendars > [your email account] > [Advanced --- or outgoing mail server]
    ... and look for a password in that area.

  • Get xml data from a web service into Forms?

    Hello folks! I am reading active directory info from a web service into forms via imported java classes. I can read from functions that return strings just fine, but I have to get the output from getGroupUsers which returns an XmlDataDocument. How do I read this in and parse it in Forms?
    I will be grateful if y'all could point me to an example.
    Thank you,
    Gary
    P.S. Here is a snippet of how I get the full name by passing an ID:
    DECLARE
    jo ora_java.jobject;
    rv varchar2(100);
    BEGIN
    jo := ADSoapClient.new;
    rv := ADSoapClient.getUserName(jo, 'user_ID');
    :block3.fullname := rv;

    Hello,
    Since you are already dealing with server-side JAVA, I would suggest you create a method that would do the parsing server-side and what your PL/SQL will be dealing with is just the return string.
    Here is a method I use to read an XML file (actually, it is an Oracle Reports file converted to XML) and from the string version, I will do search, replace and other things.
    So, from getGroupUsers which returns an XmlDataDocument, you can adapt this method to get your data server-side and let the form module read the output data.
    <blockquote>
    private String processFileXml(String fileName, int iFile) throws ParserConfigurationException, SAXException,
    IOException, XPathExpressionException{
    try{                
    DocumentBuilderFactory domFactory = DocumentBuilderFactory.newInstance();
    domFactory.setNamespaceAware(true);
    InputStream inputStream = new FileInputStream(new File(fileName));
    DocumentBuilder builder = domFactory.newDocumentBuilder();
    Document doc = builder.parse(inputStream);
    StringWriter stw = new StringWriter();
    Transformer serializer = TransformerFactory.newInstance().newTransformer();
    serializer.transform(new DOMSource(doc), new StreamResult(stw));
    return stw.toString();
    catch (Exception e){
    System.err.println(e);
    System.exit(0);
    return "OK";
    </blockquote>
    Let me know if this is of nay help.
    Thanks.

  • How to upload data into form of Oracle EBS R12 using ATS ver 9.0

    Hi experts,
    Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
    For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
    Thanks in advance
    Best Regards
    Hieu

    Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
    For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
    when you record one iteration the name of any object would be ObjectNAME_(0)
    You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
    Thanks

Maybe you are looking for