Fault messages in target web service (microsoft visual studio) -experience?

Hi guys!
We use async scenario : SAP_R3 (ABAP Proxy) -> XI -> Web Service (SOAP). Target web service is created in microsoft visual studio. Standard scenario worx fine. We send data from r3, the web service processes them. However, we want to use also fault messages in case, there will be exception rised in the target web service and let operator in sxmb monitor know, that there's a problem. These fault messages should be used as acknowledgement. But we have serious problem with implementing fault messages in the target web service in the visual studio. Does someone have experience with this?
Thanx a lot for info!
Olian

Hi
see the below links
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0d7349b6-0901-0010-ddbe-ec43178a61ff
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee5bc490-0201-0010-e9b5-a258cf083bca
Troubleshooting SOAP Message - XI - /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
Troubleshooting - RFC and SOAP scenarios-/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
Regards
Chilla

Similar Messages

Create BCS External Content Type or a list based on a WCF Web Service using Visual Studio

Hi ,
How to create a BCS External Content Type or a list Based on a WCF Web Service using Visual Studio.
The link provided here shows the requirement through Designer. http://msdn.microsoft.com/en-us/library/office/ee556431(v=office.14).aspx but I want this to be through VS code..
Please help ..Appreciate your help..
Thanks,
Satheesh

HI Sateeshlt,
You can see the below link also;
http://www.fabiangwilliams.com/2013/10/14/part-2-of-3-blog-update-on-sharepoint-bcs-with-full-crud/
Best Regards,
Brij K

Problem while Adding the SAP Web service in Visual Studio 2005

Hi all,
I have created the web service thru SOAMANAGER.
Now I am just trying to access that web service in Visual Studio 2005.
I am not able to access...
Please give me the procedure , if any body knows.
-Balajee Jeyaraj.

- Start Tcode SOAMANAGER
- Now it depends on your setup, you might have to press "Logon" and.......logon
- Click tab "Business Administration"
- Click "Web Service Administration"
- Choose "Service" for "Search by"
- Enter a search pattern (E g Z*) and press "Go"
- Mark the line of your web service
- Press "Apply Selection"
- Click the link "Open WSDL document for selected binding"
- your web browser opens.
- copy and paste the link into Visual Studio.
I'm always adding &wsdl=1.1 at the end of the link.

Error when adding BI XMLA service as a web service in Visual Studio

I have Visual Studio 2003 and I am trying to add the XMLA web service via a URL using Add Web reference.
Visual Studio is able to locate the service and methods but I also get the following error message. Can anyone help with this issue. Thanks in advance for your assistance.
message in left panel indicates it found the methods
"MsXmlAnalysis" Description
Methods
Discover ( RequestType As string , Restrictions As , Properties As )
Execute ( Command As , Properties As PropertiesType )
actual error message in right panel
There was an error downloading 'http://bid01.citus.sharp.com:8000/sap/bw/xml/soap/xmla?sap-client=100'.
The request failed with the error message:
Moved Temporarily !DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"

Hi,
Thanks for posting here.
Upgrading Web and Business Databases
Upgrading Web or Business databases to a new service tier/performance level does not take the database offline. The database will continue to work through the upgrade operation. At the time of the actual transition to the new performance level temporary
dropping of the connections to the database can happen for a very small duration (typically measured in seconds). If an application has transient fault handling for connection terminations then it is sufficient to protect against dropped connections at the
end of the upgrade.
Upgrading a Web or Business database to a new service tier involves the following steps:
Determine service tier based on feature capability
Determine an acceptable performance level based on historical resource usage
Why does existing performance for my Web or Business database map to the higher Premium levels?
Tuning your workload to fit a lower performance level
Upgrade to the new service tier/performance level
Monitor the upgrade to the new service tier/performance level
Monitor the database after the upgrade
Refer:
http://azure.microsoft.com/en-us/documentation/articles/sql-database-upgrade-new-service-tiers/
https://msdn.microsoft.com/en-us/library/azure/dn741336.aspx
Hope this helps you.
Girish Prajwal

How to send the SOAP Fault Message to the Web Service Consumer

Hi,
I have configured SAOP to Proxy Syncronous Scenario in PI 7.1 and using XML Validation in Adapter Engine to Validate the Structure of the Message Payload.The scenario is working fine.When some of the Filed's Length increses the maxLength specified in the Data Type . We are getting the Following error.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.
3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1164)
My question is How does the Web Service Consumer can handle this Soap Server Error in the SOAP Fault.Or How can we provide a specific information like 'The value '123456789' of element 'CompanyCode' is not valid.It exceeds the Maximum Length'.
I read this /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client blog .Where it is mentioned that the Web Service Consumer can handle while calling the Web Service.Is there any other solution?
Kindly appreciate your help.

Thank You Stefan for your kind reply.
So you mean to say if we use the XML Validation .we cannot provide proper error information to the calling Web Service Consumer .And While calling a Web Service they cannot Extract the Exact Message in the Text Filed(<text>) present under the Detail Element (<detail>) in the <SOAP:Fault> node. as
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.**
3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
That is why we have to use the Fault messages and Field Lengths has to be Validated in the Server proxy.
Please Correct me If I am wrong.

Unable to retreive the fault message returned by web service

Hi,
We are working on Proxy to SOAP synchronous scenario. The WSDL provided by the third party has 3 messages - 1. for request structure, 2. response structure and 3. Error message to track the exceptions, if any. The interface working fine for positive test cases but we are facing issues when trying to capture the error message returned by the web service.
We have configured the error message(provided in WSDL) as fault message in our Inbound interface. In the outbound interface, we have configured standard Fault message type provided by XI. we have mapped the two structure.
Now when error is returned by the web service, we are able to see the blank response structure in the payload in MONI in XI. Also the SOAP Error Message structure is there in XI.
But when we trying to retrieve the same in our proxy, it is giving the blank structure.
Please help how to get the error message returned by the web service in proxy....
Please help..
Thanks in advance.

>>>I am getting the error message as the fault message, in the response from the web service.
>>>Now I want to forward the same message to SAP R/3 system. For this I have configured the standard fault message in the >>>outbound interface and have mapped the same with the web service error message. So if I am not wrong, the transformed >>>>structure according to the rules in message mapping should be sent to SAP R/3 system. But I am unable to see the result >>>>of this mapping in XI MONI. Neither is this passed to Client proxy.
You are consuming the third party webservice. Third party webservice WSDL has request, response and fault message. if the third party application logic capture the exception and pass the response as fault mesg, then the above specified target fault mesg mapping with your Standard fault message mapping will be sent to sender or client proxy.
Suggestions:
Having fault message in WSDL does not mean that target system sends fault message during application exception. Check in the SXMB_MONI whether your response during exception is occuring in the fault message structure publised as WSDL. If not then doing mapping will not help. It gives only blank.
If you notice response in fault message structure from third party in SXMB_MONI, then you need to check that at the client proxy side, are you handling/done coding for fault message methods similar to response strucutre for capturing data.
Hope that helps.

Consuming Web Service In Visual Studio

Hi there:
I'm using the sneak preview of SAP NetWeaver 2004s ABAP Server and am able to consume in Visual Studio 2005 (C#) all the 'delivered' Web Services without any problems. However, when I create a Web Service through SE37 or SE80 (Wizard WS_WZD_START) using a BAPI or Remote enabled RFC (ie RFC_READ_TABLE) I am getting a error when I try to call it in Visual Studio. In Visual Studio, I am able to add the reference (http://localhost:8000/sap/bc/srt/rfc/sap/ZRFC_READ_TABLE?WSDL) no problem. When I call it though, I get {"Unable to connect to the remote server"}, with inner exception {"No connection could be made because the target machine actively refused it"}.
I am providing the credentials (username and password) in the code which are the same as when I go to retrieve the reference.
Any help would be greatly appreciated.
Thanks
Russ

Hi Russ,
I had similar problems. You should download the WSDL file to the local file system. Then you can add the downloaded WSDL file as a Web reference rather than using a URL.
Please note the following issue:
You have to provide the full qualified path <b>including</b> the file name in the text box for the URL and then press Go.
For example:
<i>
C:\Documents and Settings\USERID\My Documents\downloads\SAP\WebServices
Z_BAPI_CUSTOMER_FIND_VI.wsdl
</i>
If you just provide the path and try to select the WSDL file this probably does not work. At least it was not working for me.
Best regards,
Andre

FInding the Reporting Services 2014 Web Service in Visual Studio 2013

Hello
I am trying to figure out how to Find the webservice for my SSRS 2014 Installation from Visual Studio 2013.
I looked at this article
http://msdn.microsoft.com/en-us/library/ms155398.aspx
And it seemed to say I should use:
http://<machine name>/Reports_<Machine Name>/ReportService2010.asmx?wsdl
I am doing this from the Add Web Reference part of Visual Studio 2013
When I do this I get the error
There was an error downloading 'http://<machine_Name>/Reports_<machine_Name>/ReportService2010.asmx?wsdl/_vti_bin/ListData.svc/$metadata'.
The request failed with HTTP status 404: Not Found.
Thanks in Advance.
-Dick

http://<machine name>/Reports_<Machine Name>/ReportService2010.asmx?wsdl
Hello Dick,
The second <Machine Name> should be the "<Instance Name>" instead, if you are using a named instance of SSRS. If it's a Default instance, then use simply
http://<machine name>/Reports/ReportService2010.asmx?wsdl
Olaf Helper
[ Blog] [ Xing] [ MVP]

Problems with Web Services in Visual Studio

(Cross-posted from WAS forums)
I'm using VB.NET to access SAP BAPI's via web services from a 4.7 system. This works really well (and in my view is simpler than the .Net connector) until I try and add a Web reference to a SAP web service that returns a BAPIRET2 structure - as soon as I add the reference, I get a load of "Reference to a non-shared member requires an object reference" errors - one for each line in the BAPIRET2 definition that VS automatically adds.
Specific Example (guess who's been using OSS too long!):
1. Browse the R/3 Web Service Repository at:
http://yourmachinename:8000/sap/bc/bsp/sap/WebServiceBrowser/search.html
2. Search for BAPI_USER_GET_DETAIL, click the small "wsdl" link.
3. Copy the resulting URL, in VS add a web reference and type the necessary security details
4. Immediately in the task list 15 build errors show - one for each line of the BAPIRET2 definition.
Would be very grateful for any help on this!
Thanks
Martin Dolphin
Bentley Motors Limited
[email protected]

Did you ever get this figured out? I am having exactly the same problem in code generated by VS, with the BAPIRET2 structure.
Any help you could provide would be greatly appreciated.
Thanks!
Leighton Wingerd
Adirondack Solutions, Inc.
[email protected]

How to debug ABAP Web services from Microsoft Visual Studio

When developing .NET based Web services clients using Visual Studio that call Web services in SAP NetWeaver .NET developers would like to be able to debug inside SAP. In my blog <a href="/people/andre.fischer/blog/2007/02/07/how-to-debug-abap-web-services-from-microsoft-visual-studio to debug ABAP Web services from Microsoft Visual Studio</a> I would like to point .NET developers to the fact that SAP NetWeaver offers the option of external debugging to perform this task. Though the steps that have to be performed are described in the SAP Online Help I am sure that this option is not well known amongst the .NET developer community.

Hello WilliamIV,
>>How can I "configure" Visual Studio debugger to allow validation to work?
Since I do not have a VS2012 environment, according to your provided link, I created a test demo with VS2013, however, both ways catch the validation error:
If possible, you could have a try with VS2013 to see if it works or run the example on other machine with VS2012 to see if this is caused by the VS environment, in my side, I do not change any configuration, all are default.
If I misunderstood this issue, please feel free to let me know.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I keep getting the following message: Runtime Error...Microsoft Visual C + Runtime Library Program C:\Program Files\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now. Help!!

I keep getting the following message:
Runtime Error...Microsoft Visual C++ Runtime Library Program C:\Program Files\iTunes\iTunes.exe
R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
Please could someone help with this query as I am at a loss as to why this problem is now occurring? Thank you.

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

ERROR: MyService.jws:715:There are two or more operations with the same schema-element 'ns0:MyNameSpace' on the input message in a web service file or callback interface.

I have two web service operations that have the same complex type as their input
parameter. I want to map this type to an existing schema. I can successfully
do this with the first operation using XQuery but when I attempt to do this with
the second operation I get the following error:
ERROR: MyService.jws:715:There are two or more operations with the same schema-element
'ns0:MyNamespace' on the input message in a web service file or callback interface.
ERROR: SUGGESTION: Use different schema-element values for each of those operations.
How can I use different schema-element values? The input parameters are to be
mapped to the same schema and same element since they are the same for both operations....

I am having the same problem. How did you resolve this..?? could you please tell me the solution??
Thanks
Shari

How to view the SOAP message in a web service call + Urgent

Hi All,
Iam trying to test a web service call(Iam using CXF). But I need to view SOAP message sent to web service or need to debug the web service call. Please help me on this regard with example.

Yes. to find any tcp monitor, define a listen port number, task host and port number, changing your request to listen post, then you can monitor TCP/IP like
HTTP/1.1 200 OK
Set-Cookie: JSESSIONID=7A00BD65EF7516AD8947359A25C4D98B; Path=/ComponentName
Content-Type: text/xml;charset=utf-8
Date: Wed, 20 Oct 2004 15:45:03 GMT
Server: Apache-Coyote/1.1
Connection: close
<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<ns1:testObjectResponse soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="urn:ComponentName">
<testObjectReturn href="#id0"/>
</ns1:testObjectResponse>
<multiRef id="id0" soapenc:root="0" soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:type="ns2:MyObject" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns2="urn:ComponentName">
<name xsi:type="xsd:string">Set Name</name>
<value xsi:type="xsd:string">set Value</value>
</multiRef>
</soapenv:Body>
</soapenv:Envelope>
Lixin

Consume abap based web Service in Visual composer 7.0

Hi All,
Can any one provide me sample example or PDF on "consume abap based web Service in Visual 7.0 composer" not WSDL based
Help will be appricated by awarding point.
Thanks

Hi,
Try the below link.
Consuming WebService in Visual Composer-1
Hope it helps...
Regards
Basheer

Unable to connect Biztalk service from Visual Studio

I am trying connect to the BizTalk Adapter Service from My VS2012.
I am sure connect information are correct with ACS Nnamespace/Issue name/Issue Secert
But got some errors
Exception Code: BadRequest
Error:Code:400:SubCode:T0:Detail:ACS50000: There was an error issuing a token. ACS50001: Relying party with identifier 'http://xxxxxxxxx.biztalk.windows.net/default' was not found.:TraceID:fda3d29f-911c-4b63-8733-98c59ee4f685:TimeStamp:2015-04-24 15:51:23Z
How can I do?

Thanks Girish,
I can connect Biztalk service from Visual Studio now.
but I have an another issue with add SQL Target.
How can I fix it?
error below:
500
Code: '13'
Message: 'Error occurred while trying to bring up the relay service. Error Message: '要求的名稱正確，但找不到所要求類型的資料。
'/twtestbs~_order_9fe15fb881964e3fafa9f79c7128daa9' 應用程式中發生伺服器錯誤。
要求的名稱正確，但找不到所要求類型的資料。
描述:
在執行目前 Web 要求的過程中發生未處理的例外狀況。請檢閱堆疊追蹤以取得錯誤的詳細資訊，以及在程式碼中產生的位置。
例外狀況詳細資訊:
System.Net.Sockets.SocketException: 要求的名稱正確，但找不到所要求類型的資料。
原始程式錯誤:
在執行目前 Web 要求期間，產生未處理的例外狀況。如需有關例外狀況來源與位置的資訊，可以使用下列的例外狀況堆疊追蹤取得。
堆疊追蹤:
[SocketException (0x2afc): 要求的名稱正確，但找不到所要求類型的資料。]
System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) +8767461
System.Net.Dns.GetHostEntry(String hostNameOrAddress) +191
System.ServiceModel.Channels.DnsCache.Resolve(Uri uri) +535
[EndpointNotFoundException: 主機 twtestbst0379-bts.servicebus.windows.net 沒有 DNS 項目。]
System.ServiceModel.Channels.DnsCache.Resolve(Uri uri) +17434161
System.ServiceModel.Channels.SocketConnectionInitiator.GetIPAddresses(Uri uri) +211
System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout) +329
System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout) +31
System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout) +951
System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout) +104
System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) +742
Microsoft.ServiceBus.NetworkDetector.CheckTcpConnectivity(Uri baseAddress, Exception& exception) +733
[AggregateException: 發生一或多項錯誤。]
[CommunicationException: Unable to reach twtestbst0379-bts.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443)]
Microsoft.ServiceBus.NetworkDetector.DetectInternalConnectivityModeForAutoDetect(Uri uri) +648
Microsoft.ServiceBus.ConnectivityModeHelper.GetInternalConnectivityMode(ConnectivitySettings connectivitySettings, HttpConnectivitySettings httpConnectivitySettings, Uri uri) +149
Microsoft.ServiceBus.ConnectivityModeConnectionElement..ctor(TokenProvider tokenProvider, SocketSecurityRole socketSecurityMode, BindingContext context, NameSettings nameSettings, ConnectivitySettings connectivitySettings, HttpConnectivitySettings httpConnectivitySettings)
+169
Microsoft.ServiceBus.TcpRelayTransportBindingElement.BuildInnerBindingElement(BindingContext context) +647
Microsoft.ServiceBus.TcpRelayTransportBindingElement.BuildChannelListener(BindingContext context) +40
Microsoft.ServiceBus.HttpRelayTransportBindingElement.BuildChannelListener(BindingContext context) +429
System.ServiceModel.Channels.Binding.BuildChannelListener(Uri listenUriBaseAddress, String listenUriRelativeAddress, ListenUriMode listenUriMode, BindingParameterCollection parameters) +177
System.ServiceModel.Description.DispatcherBuilder.MaybeCreateListener(Boolean actuallyCreate, Type[] supportedChannels, Binding binding, BindingParameterCollection parameters, Uri listenUriBaseAddress, String listenUriRelativeAddress, ListenUriMode listenUriMode,
ServiceThrottle throttle, IChannelListener& result, Boolean supportContextSession) +393
System.ServiceModel.Description.DispatcherBuilder.BuildChannelListener(StuffPerListenUriInfo stuff, ServiceHostBase serviceHost, Uri listenUri, ListenUriMode listenUriMode, Boolean supportContextSession, IChannelListener& result) +572
System.ServiceModel.Description.DispatcherBuilder.InitializeServiceHost(ServiceDescription description, ServiceHostBase serviceHost) +1908
System.ServiceModel.ServiceHostBase.InitializeRuntime() +90
System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout) +182
System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout) +742
System.ServiceModel.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity) +126
System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity) +901
[ServiceActivationException: 編譯期間發生例外狀況，因此無法啟動服務 '/twtestbs~_order_9fe15fb881964e3fafa9f79c7128daa9/RuntimeService.svc'。例外狀況訊息: Unable to reach twtestbst0379-bts.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443)。]
System.Runtime.AsyncResult.End(IAsyncResult result) +650220
System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +210733
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +166
版本資訊:
Microsoft .NET Framework 版本:4.0.30319; ASP.NET 版本:4.0.30319.17929'.'

Fault messages in target web service (microsoft visual studio) -experience?

Similar Messages

Maybe you are looking for