Faulty Powerline Adaptor - no response from techni...

Hello,
One of my Comtrend Powerline Adaptors gave up the ghost on Monday 8th March, not showing any lights at all. When I unplugged it, I found that the two plastic mounting pins had basically disintegrated and the whole front of the unit came off in my hands.
After consulting the troubleshooting guide, I only got a very dim power light and the unit wouldn't reset. I followed the advice given and reported the problem to the BT Vision Technical Help Desk via their online form.
I received an automated reply but have had nothing else in reply since Monday. What's the usual response time for the technical help desk? Is is worth pursuing my original report or is it likely to be lost in the system somewhere!?
Any help from the moderators would be gratefully appreciated
Cheers,
Clare

Phone up on 08001114567

Similar Messages

Using Time Capsule to create a wifi network from a Powerline Adaptor

OK, before I ask my question, I just have to 'paint the picture'.
I live in a work residential complex, with wifi provided. However this wifi is awfully weak, to the point that I can only sit in one spot to receive it, and then it still drops out. I tried using an airport express to extend the signal, but the wifi router won't allow it.
Through the company that provide the service, I am know using a powerline adaptor ( you know the sort; one ethernet cable from router to adaptor, and another from adaptor in room to laptop) and I get broadband.
I'd like to find some way of getting wifi from that, to my mbp, iphone and appletv all on the same network.
Ok, the crux, I want to buy a Time Capsule, if I do so, by plugging the ethernet cable from powerline into it, will I be able to create a wifi network that 1. Allows devices to connect to it, and 2. Access the Broadband service.
Hope that's clear ;-)

I want to buy a Time Capsule, if I do so, by plugging the ethernet cable from powerline into it, will I be able to create a wifi network that 1. Allows devices to connect to it, and 2. Access the Broadband service.
Yes and yes.

Time Capsule and Powerline Adaptors - Internet periodically freezing

Hi all,
I hope you can help with a problem I am having with my home network. The Virgin Media broadband in my home arrives in my home office and, in the past, when I connect my Time Capsule to the VM router and use it to generate a wireless network I get a very poor wifi signal in the rest of the house - the office is at one end of the property and I suspect there are several metal beams in the wall blocking the signal.
So, to improve the network I bought some TP-Link Powerline adaptors. I have run an ethernet cable from the VM router to one adaptor, put the second adaptor in the living room and attached an ethernet cable from the adaptor to the Time Capsule. The wifi signal from the Time Capsule is now excellent in all parts of the house, but, for some reason, the internet periodically "freezes" on any wifi or wired device that I attach to the TC. There is no issue with the wifi reception - all the devices continue to be attached to the TC with great reception. The broadband service is also not at fault - I have an iMac connected directly to the VM router in the office and the internet continues to run perfectly on that computer during these outages. Each outage lasts 1-2 minutes, occurs about every 5 minutes and during that time I am not able to do anything on the internet - it is not related to a particular site
Does anyone have any suggestions as to what is going on?

Powerline adapters are not ethernet cables.. they have their own issues.
Test the setup by plugging a laptop/nearby computer into the powerline adapter and see if you have issues at all. Load it up since the TC is going to run it fairly hard with multiple computers connected.. ie Run a few downloads and do browsing etc at the same time.. check the actual speed of the link and how stable it is.
If it is fine, then the issue is the TC.
Alternatively just get another router, eg TP-Link WDR3600 which is only about $70-80. Borrow one from a friend. If that has no problems then you can pretty well say the issue is TC.
In that case we need to know exactly which TC running exactly which firmware. This issue is well known in the later AC model.. it is caused by some issue with the WAN port not holding the line correctly. You may need to do a bit of work on it and sadly apple have removed logging and lots of abilities from the TC so it is now pretty hard to do any realistic testing. Hence if the new router works.. keep it and set the TC as a Wireless AP.

Powerline Adaptor Failure Rate

There have been a few threads now regarding the failure of Powerline Adaptors.
I recently spent £20 for a second hand replacement from the well known auction site, but others seem to be asking or getting BT to replace these, presumably for free even after they are over a year old?
Now we all know these run quite hot, and electronics and heat are not a good match for long life, so if we are going to see more of these fail, can we expect BT to supply a better version or superior make in the future, or replace the current Comtrends if they are proving unreliable?
Its a little worrying that as they run so hot, some of the increasing number of faults might result in a fire?
Mine failed after 1 year and 10 months of use, left on 24/7.
Any thoughts guys...........?

Has anyone out there had success with addition of said Powerline adaptor?
The performance of Ethernet powerline adapters cannot be predicted in advance. One brand might work great in one home, but the same brand and model in another home just won't work.
Your best bet is to make sure that you understand the stores' return policy before you buy, since you cannot know how well.....or IF...any given adapters will work in your home until you try them out in your home.

Powerline adaptor issue

Hi,
We want to move our BT Vision box from the kitchen to the lounge.
In the kitchen it works on a powerline adaptor as it is too far from the hub to hardwire.
When we transfer it to the lounge, the powerline adaptor looks like it is working fine - all the same lights as when connected in the kitchen - but we get the message ' Not Online' on the TV, and cannot pick up our Vision service.
If we move it back to the kitchen again, it works fine.
We have plugged an extension into the kitchen and run it through to the lounge, plugged the poweline in so it is effectively working on the kitchen electricity circuit and it again works fine.
We have one consumer unit, nothing complicated, and cannot understand why the lounge will not work!!
Can anyone help??
Thanks

There are many threads on this forum about the use of Powerline adapters. If you are lucky they will work, but there is no guarantee that they will. The best chance of them working is if they are on the same ring main, but even then they can cause problems. Bt does not now approve their use.

BT Ethernet Powerline Adaptor Issue

I have had a BT Home Hub 5 setup in my hallway for over a year now and I used to connect my computer and laptop to the internet via three Netgear powerline adaptoss which worked okay. I love online gaming so reliable high speed internet connection is essential. But, problems kept arising so I decided to replace the Netgear powerline adaptors with BTs broadband extender 500 kit.
Currently, I have one adaptor connected directly to my router, and two more upstairs in different rooms. I managed to setup the kit after some time due to a really unclear instruction manual and got the three lights on all of the adaptors green. However, the ethernet green light is continuously blinking...
The first day I experienced okay connection speeds, but today was the complete opposite! This happened throughout the day and I finally decided to try again later during an off-peak time at 11pm. Same result.
Firstly, the data light on the adaptor connected directly to the router sometimes goes orange, I understand this means medium transfer speed, but this didn't happen at all yesterday. Next, the adaptor in another room upstairs had an orange data light and sometimes all the lights switched off then back on again as if the adaptor was reseating itself?! My laptop connected to this adaptor could not connect to the internet at times and when I tried to view a simple Youatube video, it buffered and lagged! This has never happened before. Also, in the same room, when I tried to access the internet via the Wi-Fi with my tablet and laptop, the same issue arised - very slow internet. Let me remind you that I have not experienced this slow internet speed before.
Meanwhile, someone was watching Netflix in another room upstairs using the third BT ethernet adaptor. They said the streaming was buffer-free and perfectly fine.
I am very confused as to why the internet connection with was fine for someone else in my house using the broadband extender, but not for me. Could it be because I am using three BT broadband extender adaptors instead of the two? But when I used the Netgear adaptors, I used three as well and there were not as many issues than I am facing now...
Any help would be greatly appreciated. Thank you for reading.
p.s. All the BT powerline adaptors are coronary enacted directly to the lead rival rockets and I know for a fact that there are no problems with my devices that I use to try and access the internet.

Powerline adaptors are tricky things, as they rely on your mains wiring to carry the signal. All sorts of things can affect the signal strength, and consequently the speed.
Interference from nearby appliances can affect the signal. If possible, try another socket in the room.
As a general rule, sockets on the same ring are best. The adaptors should work on different rings off the same consumer unit (mine do), but at a lower speed.
If you have a complicated wiring system with multiple distribution boards, then that may affect the speed a lot. If you have a three-phase mains supply, then they are unlikely to work on different phases.

How do you get a RESPONSE from Verizon?

How does one get a response from Verizon? Here's my situation...
Given the amount of trouble that I have had with a recent order, you would think that I was trying to land a 747 jet on my roof. In reality, all I was aiming to do was to cancel the $19.99 per month phone service that I never used. I do not even own a phone, for that matter. I also had enhanced high speed Internet, and I wanted to retain the high speed Internet. A few days before January 13, 2012, I called Verizon and spoke to the 1st sales representative, who ensured me that it was no problem to cancel the phone service and yet retain the high speed Internet for the same monthly price. 24 hours later, my high speed DSL service was no longer functioning. I will try to briefly explain the disastrous customer service that ensued.
The first several phone calls to Verizon were not productive as I was transferred to the wrong department, and then at least one of my phone calls was dropped by the Verizon server. The representative did not call me back. I finally got in touch with a technical support representative, the 2nd Verizon representative, who informed me that the high speed Internet had been turned off and that I had to speak to a sales representative to solve the issue. Another sales representative, the 3rd Verizon representative, informed me that the 1st representative had cancelled my phone line, and thus cancelled all of my services. Great. The 3rd representative informed me that he was absolutely capable of handling the problem and that he would simply add a new order for high speed Internet, which was to be activated the next morning. The next morning came and went, and guess what? No Internet. I called again. The 4th Verizon representative told me that everything that had been done previously was incorrect and that the sales department is not capable of making such changes. She told me that she could not help me and that my claim had to be submitted to a different department, which has the authority to un-do all of the previous changes. She told me that I would receive a call back the same day to resolve the issue. Given my previous experiences with Verizon, I was confident that I would not, in fact, receive a call back and so I asked her how I could get transferred to this department, if I needed to call again. She said that I could not be transferred. Okay. So then I asked her what to ask for so that next time I called, I could be transferred to the correct department without dealing with yet another sales representative who gives me yet a different story. She informed me that she could not provide that information to customers. The Department That Shall Not Be Named (and that I cannot contact) did not call me, and I was not surprised. Unfortunately, I did not know how to go about contacting them, because, as I was told, customers aren’t allowed to do that.
The 6th phone call to Verizon was dropped by the Verizon server. The 7th phone call to Verizon went to the 5th Verizon representative, a sales associate who placed us on hold for the first 15 minutes only to inform us that she could not find any record of our Internet service. What the heck was she doing, checking her Facebook account? She finally returns, puts us on another extended hold, and then adamantly tells us that we need to speak with technical support, which, if you recall, was the first Verizon party that I spoke at the beginning of this debacle. The 5th representative transfers me again to technical support. Of course, the technical support personnel, the 6th Verizon representative said what the first one did, that the account was inactive and that we needed to talk to the sales department. My husband was on the phone at this point because I was DONE. When the 6th technical support representative tried to transfer him back to the sales department, my husband insisted that the 6th technical support representative remain on the line while we spoke to yet another sales representative, the 7th Verizon representative. The 6th technical support representative patiently waited with us while we sat in yet another long queue to speak with a member of the sales department.
The 7th sale representative, from the retention department based out of New Jersey, found that all previous orders had been set up erroneously. She cancelled the old orders and reinstated a completely new order. The DSL began working a few days later. MAGIC. She then left me a voicemail message saying that she would eliminate the activation and shipping fee (duh) as I never canceled the account to begin with and as I already had the equipment. She also applied a coupon to reduce the price to around $30 per month, assured for the next 2 years. I was relieved.
You can imagine our frustration then when we received the bill for $79 on February 6, 2012, which included a much higher monthly rate (around $45) and the shipping and activation fee of $19.99 that we were assured we would not pay. Again, nothing was shipped to us because we already had the equipment.
Our next phone call to Verizon landed us with a guy, the 8th Verizon representative, who had no intention of helping us. According to him, there was no record of these wrongs, and despite the fact that we had an old account number and three order numbers that were screwed up, he did not deem that there was enough evidence to change our monthly bill. (Unfortunately, the 7th Verizon representative did not make notes or appropriately document the situation on the new account.) The 8th Verizon representative then had the audacity to comment that we could be lying to him, yet he was unwilling to view the evidence that we could have presented. Instead, he suggested that we call tech support again and try to go through the same process to get connected to the mysterious “retention department” which he knew nothing about.
At this point, I was beyond fed up. The attitude of the 8th Verizon representative put me over the edge. I filed a complaint with the Better Business Bureau (BBB) with an abbreviated version of this story. I did not file the complaint to get back at Verizon. Instead, I filed the complaint because I knew that another phone call to Verizon would be useless. I’ve been dealing with this issue for over a month, and I’m sick of it. I have better things to do with my time, believe it or not, and this situation has resulted in a significantly waste of my time over what, in my opinion, was a very simple issue to resolve.
The BBB processed the complaint and I was contacted last Friday afternoon by a Verizon representative (the 9th) who said that she was looking into the matter and that she would respond to me within two to three business days. Well, it’s almost the end of the week, and I have received no response. Again, after all of this, how could I be surprised?
I have been a Verizon customer, wireless and residential, for as long as I can remember, but I am reaching the point of outrage. This situation is truly unacceptable.
You would think that, in 2012, with all of the technology available to us and the fact that Verizon is a COMMUNICATIONS COMPANY, that at least Verizon employees would be able to make a basic change to an existing order and that at least one out of 9 Verizon representatives would be able to solve this issue in a span of over four weeks. Think again.
How does one get a response from Verizon?

dougiedc wrote:
It boggles the mind. The Verizon store on L Street downtown Washington, D.C. cannot access my Verizon account. They can only sell cellphones then it's up to me to contact Verizon on my own to get the hook up. I even asked "Are you Verizon employes? Is this a vendor store or is it really a Verizon owned and operated store?" The answer "Yes, we are Verizon employes, yes this is a Verizon owned and operated store" ...
Yes, it indeed boggles the mind. I'm of course referring to the fact that your post concerns Verizon Wireless products and services. This forum is dedicated exclusively to Verizon Communications services. As you probably know, Verizon Wireless and Verizon Communications operate as separate companies.
If you need help for a Verizon wireless product or service, it's best to direct questions to the Verizon Wireless forums. You can reach them by clicking on "Wireless" (either here or at the top of the page).
Good luck and I sincerely hope you get your issue resolved.

Acrobat 9: compiling responses from multiple questionnaire responses into spreadsheet

I want to send out a questionnaire to 150+ individuals, then compile responses from all parties into one spreadsheet. The form uses drop down options and text fields.

You can compile the data from multiple PDF forms into a single spreadsheet in Acrobat, if that's what you're asking. I can't say for sure where that command is in Acrobat 9, but it should be somewhere under Document or Advanced...

Unable to get the response from dynamic partnerlink

Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
Srikanth

Hi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

Issue with receiving response from web application

Hi,
I have configured B2B with business protocol as 'Custom document document over Internet', document exchange protocol as AS2-1.1 and transport protocol HTTPS1.1 to invoke a web application deployed in Oracle Application server. B2B is able to invoke the web application with HTTPS request which contains an xml.
I have set the acknowledgment mode as 'Sync' and 'Is acknowledgement handled by B2B' as true. But while receiving the response from web application which is an xml, B2B is showing the error as
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3244)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1665)
     at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2382)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1825)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:974)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
I have added headers as present in the wire message of the request. In B2B, it is showing the wire message for response as follows.
TO_PARTY=XXX
AS2-To=XXX
DOCTYPE_NAME=TestAS2DT
DOCTYPE_REVISION=1.0
Date=Tue, 03 Nov 2009 06:09:22 GMT
AS2-Version=1.1
AS2-From=YYY
Content-Transfer-Encoding=binary
[email protected]
ACTION_NAME=TestAS2_BA
Content-Type=application/xml
Server=Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
MIME-version=1.0
User-Agent=AS2 Server
FROM_PARTY=YYY
Content-Disposition=attachment; filename=1.0
Connection=Keep-Alive
From=YYY
Keep-Alive=timeout=15, max=100
<?xml version="1.0" encoding="UTF-8"?>
<Books>
<Book>
<BookTitle>Ajax Hacks</BookTitle>
<Author>Bruce W. Perry</Author>
<PubDate>March 2006</PubDate>
</Book>
</Books>
I am able to see the xml sent as response from web application in Payload as follows.
<?xml version="1.0" encoding="UTF-8"?>
<Books>
<Book>
<BookTitle>Ajax Hacks</BookTitle>
<Author>Bruce W. Perry</Author>
<PubDate>March 2006</PubDate>
</Book>
</Books>
I am able to see the HTTP response in b2b_dc_transport.log. In transport log it is not showing any error. Please help me to fix this issue.

Hi,
Request and Response should be part of same agreement. I hope you are not confused between Acknowledgement and Response. Acknowledgement can be received in the same session (sync mode) but Response will always come in a different session and will be treated as a different document. If, for request, party A is initiator and B is responder then for response party B will be initiator and party A will be responder (as Requset and Response are two docs in case of Custom Document)
For configuring X-Path, please refer section 8.3.11 Configuring the XPath Expression for a Custom XML Document at below link -
http://download.oracle.com/docs/cd/B14099_19/integrate.1012/b19370/busact_coll.htm#sthref784
Please let us know whether you are trying to receive a response or Ack?
Regards,
Anuj

Discoverer Portlet Provider, No Response from Application Web Server

I must have some odd configurable incorrect. I hope one of you can help me out and point me in the right direction.
My issue involves the "Discoverer List of Worksheets" portlet. It will display all the workbooks and I can drill in and see the worksheets, but, when I click/choose a worksheet, it will return within a couple seconds and display "No Response from Application Web Server" in bold red letters, then "There was no response from application ...", then "Please notify the site's webmaster ...". I have spent the day trying to lock down a log on the http server, j2ee, web cache and used enterprise manager to see logs which changed immediately after the error but didn't seem to find much.
What am I missing? Is there a timeout somewhere? Does it look like I missed something when I configured anything?
Below are the configurables and answers to some of the obvious questions.
Thanks,
BC
Windows 2003 sp1
App Server 10.1.2.2.0
Discoverer 10.1.2.54.25
ssl -> no
sso -> yes
provider registration:
http ://luke.xxx.com/discoverer/portletprovider (actual does not have a space after "http")
"cookie domain" not checked
"user has the same identity ..."
user/session --> "once per user session"
from web cache log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKC ... 4hUQ%3D%3D HTTP/1.1" 302 1909 "6959909483946,0"
10.2.2.226 - - [18/Jul/2007:18:17:37 -0700] "GET /osso_login_success?urlc=v1.4~534 ... 774851DD HTTP/1.1" 503 40
2 "6959909483946,0"
from middle tier http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKCk ... a4hUQ%3D%3D HTTP/1.1" 302 1921
from infrastructure http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~BFE8 ... HTTP/1.1" 302 4998
url being passed from provider:
http ://luke.xxx.com/discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_samewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F1048&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NAME_241292&vw_partitionid=241292&&vw_return_url=eNr ... 1z9AEA6Dsegw%3D%3D
url that returns:
http ://luke.xxx.com/osso_login_success?urlc=v1.4~0C549F ... 3E94
the rest should be obvious:
Processes in Instance: rc_luke_mt1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 5352 | Alive
OC4J | home | 2764 | Alive
OC4J | OC4J_Portal | 2452 | Alive
OC4J | OC4J_BI_Forms | 3644 | Alive
WebCache | WebCache | 5372 | Alive
WebCache | WebCacheAdmin | 2608 | Alive
HTTP_Server | HTTP_Server | 5204 | Alive
Discoverer | ServicesStatus | 5860 | Alive
Discoverer | PreferenceServer | 5580 | Alive
wireless | performance_server | 5216 | Alive
wireless | messaging_server | 4872 | Alive
wireless | OC4J_Wireless | 6116 | Alive
DSA | DSA | N/A | Down
Processes in Instance: rc_luke_infra1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 2768 | Alive
OC4J | oca | 2312 | Alive
OC4J | OC4J_SECURITY | 5348 | Alive
HTTP_Server | HTTP_Server | 3036 | Alive
DSA | DSA | N/A | Down
OID | OID | 2492 | Alive
Congratulations! You have successfully reached your Provider's Test Page.
Recognizing Portlets...
default_gauges_portlet_name
default_worksheet_portlet_name
default_list_of_worksheets_portlet_name
Recognizing initialization parameters...
oracle.portal.log.LogLevel : 7
Recognizing component versions...
ptlshare.jar version: 10.1.2.0.2
pdkjava.jar version: 10.1.2.0.0

hi,
i also got the same error on my IE when i want to run VPE Workbench 5.6
the error :
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
The error came up after i update the windows server (restart server), before that everything is running fine and ok.
I dont know where the problem is. Is it because the update? or Application Server?
I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

No Response from Application Web Server - j2ee when running a long report

Using Oracle Application server, 10.1.2 and a j2ee application which uses Oracle Reports to create pdf report output.
When a report takes 5 mins or more to be produced, the following error message occurs, ending the session. The report request however does continue to run, and the pdf is eventually
produced on the server, but the user cannot retrieve it. So I know the report server is still going after getting this error:
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
I'm assuming this is a timeout setting in a configuration file, but where?
Thx,
Tim

Hi Tim,
Take Backup of httpd.conf from Oracle_home2(midtier)
Now Edit httpd.conf, set timeout 1200 ie 20 mins (this depends on you how much time u need to set Note: Values are in seconds)
Now restart entire Mid tier
Then run the report again.
Regards
Fabian

Firefox freezes about five seconds after I open it, and whenever I use Ctrl+alt+delete to close it I get told that it is waiting for a response from me.

I am having a problem with Firefox. Whenever I open it, it runs fine for about five seconds and then freezes. A small white rectangle appears in the upper left corner of the browser window. The screen still scrolls fine, but whenever I try clicking on anything (including the menus in the toolbar), it just gives me an unresponsive 'ding' sound. When I try closing the programme with Ctrl+alt+delete, I get a message saying 'The system cannot end this programme as it is waiting for a response from you'. I originally had this problem with an earlier version of Firefox and tried installing Firefox 4 to see if this helped. It worked for two days and began doing it again. I have already tried un- and re-installing Firefox and restarting my computer, and Firefox will not run properly for long enough to let me disable any add-ons or plug-ins. What can I do to fix this?
I've added a couple of screencaps of the problem. (or tried to)
[http://i53.tinypic.com/161hvh2.jpg The white rectangle]
[http://i51.tinypic.com/dwsq1.png Error message]

Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

One socket and two ports, not getting response from the server

Hi everyone,
I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port. My problem is that i can't create another socket using this port and therefore not getting the response from the device.
Can you people tell me how to handle such socket communication in java ?
Thanks in advance.

I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.Are you sure? That's not usual. It would be usual for it to use the same port for listening, reading, and writing.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port.I would try just reading from the same socket you are sending on. I suggest you have misunderstood how the device works.

Server 2012 R2 - No response from the UmRdpService service and more...

Hi!
We have a Remote Desktop Services Deployment with the following:
LIC01 – Windows 2012 R2 - Licensing
RDCB01 – Windows 2012 – Connection Broker
RDWA02 – Windows 2012 R2 – Web Access
RDG01 – Windows 2012 R2 - Gateway
RDG02 – Windows 2012 R2 - Gateway
RDG03 – Windows 2012 R2 – Gateway
RDSH01 – Windows 2012 R2 - Session Host
RDSH02 – Windows 2012 - Session Host
RDSH03 – Windows 2012 R2 - Session Host
RDSH04 – Windows 2012 R2 - Session Host
RDSH05 – Windows 2012 R2 - Session Host
RDSH06 – Windows 2012 R2 - Session Host
RDSH07 – Windows 2012 R2 - Session Host
RDSH08 – Windows 2012 R2 - Session Host
RDSH09 – Windows 2012 R2 - Session Host
RDSH10 – Windows 2012 R2 - Session Host
We have two Session Collections:
Office-R2 (All Server 2012 R2 RDSHs)
"Office (RDSH02, Closed for users)"
User Profile Disk are enabled to a SOFS Share (Server 2012).
Client Settings: Everything except "Plug and play Devices" are enabled
Problem:
Suddenly, one or more of RDSH
servers (in the Office-R2 Collection) get the following error:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
After this, we get similar error messages
to other services, such as:
AudioEndpointBuilder, NcbService, ScDeviceEnum, WPDBusEnum, Netman
Users logged into the server, looses Redirection
services as local drives and local
printers, and they also have problem signing out of the server. (Hangs on signing out)
New Users that tries to sign in to that server are also having trouble (Hangs on signing in).
After using the logoff tool to sign out every user on that server, I end up With the following:
It
appears that there are no users logged on,
yet there are many Disconnected sessions...
Looking at the SOFS file share I still see that RDSH04 has read/Write to the .VHDX file that hold the User Profile.. And If the user try to log on to another server in that Collection, it get a temporary profile.
If I kill the Conncetion to the VHDX files, Users can then sign in normally to another node it that Collection.
Trying to restart the server With "Shutdown -r -t 0 -f" does not work, It just hangs on Shutdown (waited 3 days), so All I can do is Press and Hold.We
have also seen BSoD on these nodes, but I'm sure if they are related to this error:
WinDBG is saying:
BugCheck 3B, {c0000005, fffff803538fa84e, ffffd0002711cb00, 0}
Probably caused by : dfsc.sys ( dfsc!DfscCacheStore+6f )
I found https://support.microsoft.com/kb/2925981 and
http://support.microsoft.com/kb/2525246, but they are not for Windows Server 2012 R2.
Any Idea?
Thanks
Anders

Hi,
Firstly, dfsc.sys indicates the DFS clients. It means that your systems use DFS service to access the file share.
Please let us know if you configured the DFS service on your file server.
Also, what is the format of file path you configured for UPD?
\\FileServer\FileShare
Or
\\Domain.com\DFS NameSpace\File Share
Thanks.
Jeremy Wu
TechNet Community Support

Faulty Powerline Adaptor - no response from techni...

Similar Messages

Maybe you are looking for