FDM keeps give me DCOM Security Error when I configure the Load Balance

Hello, everyone.
I installed FDM on the Windows 2008 Server.
When I configure the Load Balance Server for FDM.
It keeps give me error:
Unable to create Load Balance Manager Object!
Please verify that the user name, password, and domain name are correct.
However, I am pretty sure the user name and password input are correct.
I have tried the solution provides on Oracle Support. And changes the DCOM component's security settings.
However, the issue is still existed.

If after clearning out the security on the DCOM object and attempting to reset the Load Balance Config the same issue occurs, you will need to un-install FDM using the EPM System Un-installer and reboot. Following the reboot you will then choose to install FDM again, configure FDM using the EPM System Configuration utility, and then reset the FDM configuration items.

Similar Messages

I keep getting an internal server error when I try to load pages in live preview in edge code...

I keep getting this message every time I try to laod a page using live preview in Edge Code with Google chrome...
"The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log."
I'm using google chrome Version 33.0.1750.152. I'm running mac osx 10.9.2. I've installed Apache.
in the project settings I have this url... http://127.0.0.1/~spencer/butterville_website/
I had this working flawlessly with an earlier version of a website I was working on. I haven't changed any settings, the only thing that has changed is that I'm working with a new sub folder in the root directory. Every time I try to load the page, I get that error message. I can't figure out what I'm doing wrong. Please help! Thanks.

This query seems to be related to Edge Code. you can get help from this forum.
Also EdgeCode doesn't have troubleshooting page but you can get help from Brackets trouble shooting page.

I keep receiving security errors when trying to open a pdf.

I keep receiving a security error when trying to run my javascript program, the function previously worked, but now creates an error after I entered the addWaterMark function. I have put my whole code below for my script.
The basic function is to load a text file into an array which has the path and file location, open the document, add a watermark, save the file, close the file, then repeat for the next array position.
I am using Acrobat Standard so I am unable to debug using the console, therefore I am struggling to understand what I am doing wrong. I will point out that I am not a fluent programmer, only have a basic knowledge of programming.
Code
app.addSubMenu(
cName:"Extras",
cParent:"Edit"
app.addMenuItem(
cName:"Import File",
cParent:"Extras",
cExec:"main()"
function main()
var fileCount = 0
var listOfFiles = []
listOfFiles = importData()
amountOfFiles = listOfFiles.length
for (var i =0; i<listOfFiles.length; i++) //calculates amount of entries in the array listOfFiles
newFile = openFile(listOfFiles[i]) //Opens current file
var d = app.activeDocs; //Gets current document title name
addWater(d[0]);
app.execMenuItem("Save");
for( var x in d ) d[x].closeDoc();
function addWater(myName)
{ app.alert("watermark",0);
myName.addWatermarkFromText(
cText: "OBSOLETE",
cFont: "Arial",
nFontSize:36,
aColor: color.red,
nOpacity: 0.5
//function SaveFile saves the current file but with an addition of WM to the filename
saveFile = app.trustedFunction(function(currentDoc, currentFileName)
{ app.alert("savefile",0);
app.beginPriv();
currentDoc.saveAs(currentFileName);
app.endPriv();
//function openFile which opens the file named in the variable currentFilename
openFile = app.trustedFunction(function(currentFileName)
{app.alert("openfile" + currentFileName,0);
app.beginPriv();
app.openDoc(currentFileName);
app.endPriv();
//importData function imports the paths and filenames contained in the list.txt located on the desktop
importData = app.trustedFunction(function()
{app.alert("import",0);
app.beginPriv();
cFilePath = "/C/Users/103019944/Desktop/File_List.txt";
var stmData = util.readFileIntoStream(cFilePath);
var cData = util.stringFromStream(stmData);
var cMsg = cData;
var fileArray = cMsg.split("\r\n");
for (var i =0; i<fileArray.length; i++)
return(fileArray);
app.endPriv();

I have found the error, you are quite correct I had an extra letter in the filename, I thought I'd checked this but just shows that sattention to detail is the key.
The script works perfectly now, thanks you for your help, really appreciated.
Thanks again
Ben

Security Error when starting the server - WPLS 7.0

Security Error when starting the server - WPLS 7.0
what may be the reason ...
console :
BUILD SUCCESSFUL
Total time: 3 seconds
Starting WebLogic Server...
<May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
<May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
c.portalServer.log>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
.jks does not exist.>
<May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
<May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
<May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
tion:java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
itialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.SecurityException: Authentication for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
agerDelegateImpl.java:411)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
ateImpl.java:539)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
C:\cpDomain\bin>
Thanks
Thanks & Regards,
Siva VP,
[email protected]

Looks like you cannot connect to LDAP. Are you configured correctly?

I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

I keep getting errors when updating from the Creative Cloud (49)

I keep getting errors when updating from the Creative Cloud (49).
" Update Failed" and when I click on Learn More. The error messages says there is a download error with (49) I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

Error 49 https://forums.adobe.com/thread/1491394
-and https://forums.adobe.com/thread/1353632
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

Hi la recruiter,
There are a few types of files that Acrobat can't convert--and PDF files with security applied is one on them. I'm happy to cancel your subscription, if you decide that it's not going to work out for you. Please confirm that you'd like me to proceed with the cancelation, and I'll take care of it right away.
Best,
Sara

HT1926 I keep getting an msvcr80.dll error when trying to download newest version of iTunes.

I keep getting an msvcr80.dll error when trying to download newest version of iTunes.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99595)

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

Algebra CD keeps displaying "Script run-time error" when I try to open it

I have a CD that came with my Algebra book (I bought it used) for Technical School and it keeps displaying Scrip run-time error when I try to open it. I have updated Quick-time player, just in case that was the problem.

b noir wrote:
Is CoreGraphics.dll cited in the iTunes events?
Also check for error events happening a few seconds prior to the iTunes events. Open those events. Do they all cite the same .ttf file? If so, what's the precise spelling of the .ttf (font) file?
YES! There is a CoreGraphics.dll cited in the iTunes event. This is what exactly the window said
"Faulting application iTunes.exe, version 9.0.3.15, faulting module CoreGraphics.dll, version 1.0.60.0, fault address 0x00266560."
For the .ttf file, this is what it showed.
"Windows cannot access the file C:\WINDOWS\Fonts\ARIALUNI.TTF for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program ARIALUNI.TTF because of this error.
Program: ARIALUNI.TTF
File: C:\WINDOWS\Fonts\ARIALUNI.TTF"
I hope this will help. I still cant open iTunes.

HT4972 I keep on getting a unknown error when I go to app store?

I keep on getting a unkown error when going to app store?

Here are a number of things to try. Try signing out and back in again first.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.

Flex encounters "Security error accessing url.Unable to load WSDL"

i have created a flex application which connects to SAP via web service.
when i try to run my flex application i encounter the following error.
"Security error accessing url.Unable to load WSDL"
i went through various posts relating a BSP application and crossdomain.xml
i have created the crossdomain.xml file in the application and
i tried those options and still not able to figure out the problem.
the security error is because of the absence of the crossdomain.xml file, and in which path should i be saving the file?
Kindly help me solve the problem.
Thanks in advance.

Have you seen this blog
"Crossdomain.xml" in ABAP Web AS Server cache

Error when I deployed the java EAR application in NWDS 7.1

HI All,
I got the error when I deployed the java EAR application in NWDS 7.1 version..help me out...........................................
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=[ERROR CODE DPL.DCAPI.1023] AuthorizationException.
Reason: , An error occurred during the deployer retrieval. Cause =[ERROR CODE DPL.DC.3151] The user LJ4PJW could not be authorized, because doesn't own the (com.sap.engine.interfaces.security.ServiceAccessPermission dc) permission for deploy controller. at com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
Thanks
Costa

The user LJ4PJW could not be authorized, *because doesn't own the* (com.sap.engine.interfaces.security.ServiceAccessPermission dc) *permission for deploy controller. a*t com.sap.ide.eclipse.deployer.dc.ComponentManagerImpl.getDeployProcessor(ComponentManagerImpl.java:62)
The user is not have proper authorizations. Use some other administrators user id which has all admin roles and authorizations assigned and try to deploy.
Regards,
Ravi

I am unable to connect to my WIFI.It keeps asking for a password and when i enter the password it says that is unable to connect or i have entered an incorrect password

I am not able to connect to my Wifi. It keeps asking for a password and when i enter the password it either says Unable To Connect or Incorrect Password.
This occurred only after installing a new Wifi router from Qtel (service provider). any assisyance is greatly appreciated.

You should call Qtel technical support and ask for help.
Where did you get the password that you are trying? What does it look like? (Length, type of characters)
Do you know what type of security is being used? WEP, WPA, WPA2

FDM keeps give me DCOM Security Error when I configure the Load Balance

Similar Messages

Maybe you are looking for