FDMEE 11.1.2.3 data rule schedules not picking up the periods

Hi,
I am facing a strange issue in FDMEE 11.1.2.3 data rule schedules. When I create a schedule for the data load to use the POV periods, it works fine for the first month. After I change the default periods in FDMEE , data rule scheduler doesn't pick up the latest period. It still loads data to the previously set period. I have tried using the Periods in the data rule schedule to a new month, but this issue exists. Please advise.
Thanks
Kannan.

Are you scheduling the DLR from Data Load Rule page or have you created a batch definition with POV period checked and then schedule it?
Regards

Similar Messages

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new?

My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?

http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go.....

The UniquekeyValidator Rule is not working in the EO edit dialog.

The UniquekeyValidator Rule is not working in the EO edit dialog. We have Jdeveloper9i V. 9.0.3.2. The unique flags are checked in the primary key attribute and the custom message is never showed.
Is there a Known bug about that? if yes.. does exist any patch to fix that?
Thank u

Thank u for your answer.
Yes, of course .. i�ve already apply the unique key validator for the entity.. so that custom error message is the error im trying to get in the application.
Other issue is when im trying to edit that error message: when im going to edit the message the previous error im entered is not there. Is it normal?

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

Clean-up all data that did not match with the selection.

Hi Everyone,
In my requirement I need to Clean-up all data that did not match with the selection from my internal table lt_cdpos.....in this case wat can i use like.'Refresh' or ' Clear' or 'DELETE ADJACENT DUPLICATES FROM lt_cdpos'.
Pls suggest me...

Hi Meenakshi
Try delete lt_cdpos where kunnr NE KUNNR (from selection screen) .
Before Checking <condition> make sure both comparing field type match with each other.
You can use FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT' for append leading zeros in compare condition before comparing kunnr from selection screen
Regards
Parveen

The data target is not appeared in the Infopackage under datatagets tab.

Hi thanks for your response, i eloboreted my problem below pl see,
In the Info Cube structure i check the Trassactinal check box, In the Infopackage level under the data targets tab i selected the 'Select data targets' radio button icon but the data target is not appeared in the table.pl give me a suggetion in which location can i make a change.
Thanks & Regards
Bhaskar

The same question in data source is not appeared in the Infopackage.

Data source is not appeared in the Infopackage.

Hi Experts,
I am trying to load the data into the transactional infocube, in the infopakage level data source is not appeared in the table, pl give me the suggetion for this problem.
Thanks & Regards,
Herald

HI,
I think you are trying to load data into and cube but that cube is not showing the info package level so you are unable to select the data target. It may be because your cubes real time behaviors is set in planning mode you need to change the real time behavior into data loading mode then you can see this cube in your info package.
Regards,
Ravi

InfoPath form load rule is not checking all the rows in form library

Hi,
Requirement:
We have a form library named "HR Annual Review". In the InfoPath form we have two buttons "Save" and "Submit". User is allowed to Save multiple times and only once using Submit button. The file name of form library "HR
Annual Review" will be stored in the format “<username>+<mm>+<dd>+<yy>.xml”. Say for example, an user named Mike Walt submitted a form then the file name will be as “MikeWalt012314.xml”. If the same user (Mike Walt)
submits the form and tries to open the form for subsequent edit, then we need to show a view which has an error info saying “The Appraisal is already submitted for the current appraisal cycle”.
Solution we tried:
To achieve the above requirement, we tried using InfoPath Form Load and add a rule to check whether the combination of current user name and the year already exists in the filename column of the form library. But the rule we applied is not checking all the
rows in the form library. The rule is always checking the first row of the form library.
What we need:
We need the validation using InfoPath rule or some other way/solution to check whether the combination of current login username and current year file already exists in the form library.
Thanks in advance.
Srivignesh J

Hi Srivignesh,
Submit button Uses the Main Data connection to submit the data to the list. This is what you are using and naming the file in the format. You can create secondary data submit that will update the exiting item in the list. With this, you don't have to create
any rules to check all the rows which is also not possible in OOB InfoPath.
Once you have the two data connection, hide the toolbar from the form and display these two on the button. For The Submit button, apply the rule to hide the button if created by is not empty. For Save button, apply the rule to hide the button if Created
By is empty. This way, when a new form is created, you will see the Submit button, and when the user have to update the form, they will see Save button. Hope it help.s
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

Customize Dates recurrence pattern not picking up changes.

Hi,
For process scheduler, I have a recurrence set up with custom dates. This recurrence worked fine all through 2009 but now that I've deleted last year's dates and added dates for this year it is not working correctly. When I schedule a query using this modified recurrence it only schedules the last date (December). The recurrence is set up to schedule the next instance on completion of the last. I am used to having the query run immediately and then have an intance scheduled for the next defined date.
Help is greatly appreciated!

From KB ID 659082.1:
SPECIFIC TO: Enterprise, PeopleTools 8.48 +
Symptoms:
Once a recurrence definition has been configured to use the 'Run on Specific dates' option, at submission time, the processes are not queued for the first date. Instead, the processes are queued for the last date in the sequence.
Solution:
This is a known issue and development has included the fix in Tools 8.50.
REPORT ID: 1631169000
WORKAROUND:
Once the processes are queued for the last date in the sequence, modify the RUNDTTM field based on the newly assigned process instance number in the following Scheduler tables: PSPRCSRQST and PSPRCSQUE by using the following sql statements.
1) UPDATE PSPRCSRQST SET RUNDTTM='first date/time in the sequence' WHERE PRCSINSTANCE='newly assigned process #'
2) UPDATE PSPRCSQUE SET RUNDTTM='first date/time in the sequence' WHERE PRCSINSTANCE='newly assigned process #'
Once the RUNDTTM has been updated to reflect the initial run's start time/date, subsequent iterations using the affected recurrence will proceed as expected according to the time/dates specified.
Regards,
Bob

Periodic Alert scheduler not picking up 3 Check period Alerts out of 46

Hi All,
Please help me on this. It is rellay urgent.
In production we have 46 period alerts on one username. Due to recent changes in organization that user transferred to other organization. Now I need to cancel all these jobs on his name and need to assign on my user account since I am the owner of the applicaitons now.
I went to Periodic alert scheduler and deactivated the scheduler and activated again with today date. So now new request id came on periodic scheduler and all 43 jobs are showing scheduled on my user account . Even periodic scheduler also shwoing 'scheduled' on my user account . But some how only 3 alerts not picked up by scheduler.
Only difference I found for those 3 Alerts are they have start time and end time. Can anybody let me know how to schedule these 3 alerts again. Why did n't scheduler picked up these 3 alets.
Alert details:
Frequency-evey n calender days,Days-1,start time :05:00:00, end time : 22:00:00,Check interval : 01:00:00
I need the resoluciton asap . Appreciate your help and many thanks to looking into this issue.
Thanks,
SJP

Hi,
Please review these documents and see if it helps.
Note: 2059482.7 - Set Information and make Sure Periodic Alert Scheduler is Running
Note: 1016672.102 - Periodic Alert does not Run at Scheduled Time, Runs when Periodic Alert Scheduler Runs
Note: 427965.1 - Periodic Alert Scheduled for On Day of the Month, Runs on Day Enabled
Regards,
Hussein

I had my iphone 3gs unlocked so i could use it in Oz, however although i can phone works ok, i cant get internet, but i the option of Cellular Data Network does not appear with the new sim? Can anyone help pls?

Hi Just wondered if anyone can help with the above question? I had O2 phone unlocked and bought a local sim card, but although the calls are fine i have no option for internet etc. I have done searches and got the info details from the sim provider to activate, but instructions say i go to : Settings; General; Network and then Celluar Data Network, but I dont get that option ? When i put back my O2 sim card, the option reappears?
Can anyone help me please? Off to Australia again soon and really could do with it working properly this time.
Thanks everyone
Ronnie

Hi Ronnie, was wondering what brand sim card you bought?
Was it from Telstra, Optus, Vodafone, Virgin or Mayasim?
I have a 4 S running iOS 5.01 is there an option in Settings - Network - Carrier? As this should be set to the supplier of the sim card. In my Settings - Network there is no option for Celluar Data Network.
What version of the iOS are you using?
Some prepaid sim cards may not have a lot of data, so I suggest searching the companies websites for the best deals before you come here. Telstra usually have good plans. If you take your phone to the shop you purchased the sim card from they will usually set it up for you.
Telstra runs on a different frequency to others and offers the best coverage in Australia.
Just for the record I am not an employee of any mobile company.

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Data Origin Types not filled in the tab "Control Data" of BP interface

Hello experts,
I have loaded the clients from ECC6.0 to CRM 4.0.
Before I have loaded the clients I have maintained the data origin type for the BP in spro -> cross application components -> SAP Business Partner -> Business partner -> Basic settings -> Data Origin -> Maintain Data Origin Type.
After I have done the load initial of clients, the field "Data Origin" is empty in the tab "Control Data" in BP interface. If I do F4 in the field appear the configuration that I did in spro appear.
For this field will appear filled I'll need to do more configurations in spro?
Best regards,
Mary

Hi Mary,
The middleware does not fill this field in BP master data. You can maintain data origin type in SPRO, however the mBdoc does not use this customizing in order to fill this field.
Please try to use the BADI CRM_DATAEXCHG_BADI in order to fill this field during master data download.
It hope it helps.
Regards,
Gabriel Santana

Why does the sum of data in subfolders not add to the top folder?

I am trying to remove folders in my primary drive of my MacPro so as to free-up space on the primary drive. I have been using the Info button for each folder to see the total amount of data for that particular folder. When I add up the data contained in each folder they sum to a substantially lower amount of Gigabytes that is shown by the info button for the top folder. If you add the data shown in each of the top folders on the drive, the sum is considerable less than is shown for the drive in its info tab. Why is there this difference in the sum of individual folders and the drive Gigabytes shown? Is there data that is not apparent because hidden folders not shown in the Finder?

Suppose you had folder with three one-byte files in it. GetInfo reports three bytes in the folder. But each file takes a whole number of allocation blocks on the drive, probably something like 12K total.
Mac OS X also blurs exactly what is meant by a folder. For example, an Application is typically presented to you as one file, but if you look inside it, you would see that it may contain a hundred files in folders.
Some Users have reported better luck using OmniDiskSweeper (run as admin) to show how much real disk space is taken up by various items -- the GetInfo byte counts can be hard to deal with.

FDMEE 11.1.2.3 data rule schedules not picking up the periods

Similar Messages

Maybe you are looking for