FEP 2010 install on Windows server 2012 R2
I am trying to install FEP 2010 client on Windows server 2012 R2 from 2007 Server ( SP2 R3)
FEP deployment package fails to install. Error in execmgr is
Program exit code -2147156220.
Is there a way of installing FEP 2010 client on Windows Server 2012 R2 from SCCM 2007 ?
Thanks
Hi,
Are you running FEP 2010 update rollup 1?
https://blogs.technet.com/b/configmgrteam/archive/2013/09/16/support-questions-about-win-8.1-and-winsvr-2012-r2-for-configmgr-and-endpoint-protection.aspx
And the latest version of the FEpinstall.exe which is updated with this hotfix
http://support.microsoft.com/kb/2907566/en-us
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Similar Messages
-
FEP 2010 installation on Windows server 2012
Hi all,
Is there any step- by step guide to install FEP 2010 on windows server 2012 R2?
We need to have this in place till the time, we get our FEP upgraded.
RegardsHi,
It seems that you can only follow the official document to install FEP on Windows server 2012 R2.
Please verify that your environment meets the prerequisites before installation.
http://technet.microsoft.com/en-us/library/gg412482.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification
I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.
Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered -
Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface. -
Is Exchange 2010 supported on Windows Server 2012 R2?
According to the
Understanding Exchange 2007 upgrade prerequisites, https://technet.microsoft.com/en-US/Library/ee958305
these are the supported windows operating systems
64-bit edition of Windows Server 2008 Standard Service Pack 2
64-bit edition of Windows Server 2008 Enterprise Service Pack 2
64-bit edition of Windows Server 2008 Standard R2
64-bit edition of Windows Server 2008 Enterprise R2
has this list been
upgraded to include Windows server 2012 R2?? I am planning to migrate my Exchange 2007 server to 2010.
I have a downgrade license to 2008 STD R2, so i am wondering if i will have to downgrade the OS.
Thanks
B
BobbyIt's supported on Windows Server 2012 but NOT R2
https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx -
SharePoint 2013 with sp1 install on windows server 2012 R2
Hi All:
excuse me I have a question about sharepoint installation. I install sharepoint 2013 with sp1 on windows server 2012 R2,but i always got "Configuring Application Server Role, Web Server (IIS) Role"
message. I refer to this article <http://support.microsoft.com/kb/2765260>. I still got this message ... Which I did wrong step ?? I have been troubled for a long time, thanks to the help ...Hi TiM,
According to your description, my understanding is that you got an error when you installed the prerequisites for SharePoint 2013 SP1 on Windows 2012 R2.
Please make sure that you have installed .NET Framework 3.5 on Windows Server 2012 R2, and enable .NET Framework 3.5 by using the Add Roles and Features Wizard.
Here is a blog you can refer to:
http://blog.migrationking.com/2013/11/how-to-install-net-framework-35-on.html
Reference:http://social.technet.microsoft.com/Forums/en-US/55589deb-cddf-445f-be41-b4c97f06ff4d/sharepoint-2013-sp1-on-windows-2012-r2?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support -
Exchange Server 2013 SP1 Install on Windows Server 2012 R2
I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.
Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic -
SQL Server 2012 Express SP1 will not install on Windows Server 2012 Essentials R2
I have been attempting to install SQL Server 2012 with SP1 Express Edition for about a two weeks and have been unsuccessful. My organization recently purchased a new Dell PowerEdge T320 Server (64 Bit) with Intel Xeon Proc.-E5-2420; 2.2Ghz, 32 Gb RAM,
1 Tb RAID 5 H/D, and Windows Server 2012 R2 Essentials (preinstalled). The server will be configured as an on premises server. We are running a small church management application that requires SQL Server 2012 SP1 Express. Per the direction
of our application vendor, we downloaded the SQL Server 2012 SP1 Express file (SQLEXPRADV_x64_ENU.exe) from the Microsoft SQL Server Website. We ran the file "As Administrator" and the SQL Server 2012 Setup program began.
We selected New SQL Server Stand-Alone Installation, successfully installed the needed Product Updates, and accepted the MS SQL Server 2013 Express License terms.
When the Feature Selection Page appeared we checked only the "Data Base Eng Services". The
Instance Configuration Page was displayed and we inserted a "Named Instance= Shelby",then pressed next. On the
Server Configuration Page the only change was setting the "sql server browser = automatic". The Database Engine Configuration Page appeared
and we inserted the following settings:1] Server Configuration Tab; a) mixed mode, b)inserted SQL Server Admin pswd, c) added current user as administrator: 2] Data Directories Tab; default/no changes: 3] User Instanced Tab; default/no
changes: and 4] Filestream Tab; default/no changes. Next the
Reporting Services Configuration Page came up and the reporting services native mode was set to
"install and configure". The Error Reporting Page appeared and was left as the
"default". The SQL Server 2012 Setup program proceeded to Installation Progress Page and started to install. Just before the install program ended it displayed a message saying that there
were errors and the Database Eng Services did not succeed. I uninstalled SQL Server 2012 SP1 Express three (3) times, ran Windows Update after every uninstall, attempted to install the Database Engine and got the same results. Are there any patches or
special procedures for correctly installing SQL Server 2012 SP1 Express on my hardware configuration or Windows Server 2012 Essentials R2? Any insight would be greatly appreciated.Can you post the setup Summary and detail logs, which will help to figure out the problem? The details about the location can be found at https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Satish Kartan www.sqlfood.com -
Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks EverybodyHi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
How to install Windows Server 2012 as a Virtual Machine on Window 7 64 bit machine
Hi All,
I need to install virtual Window Server 2012 on Window 7 machine(8gb ram,64 bit machine).
Please give me the list of required softwares to install. If possible the please give download link as well.
Thanks
mitSince you're on Windows 7 I'd probably go for using VirtualBox
https://www.virtualbox.org/ to host the virtual machine.
Downloading 2012 depends what you're after really, if you've got TechNet / MSDN then you can download it from there, otherwise you'd need to have a licenced copy. You can download 180 day evaluation versions from the Microsoft website here :
2012 - http://technet.microsoft.com/en-gb/evalcenter/hh670538.aspx
2012 R2 -
http://technet.microsoft.com/en-gb/evalcenter/dn205286.aspx -
ProClarity 6.3 PAS install fails on Windows Server 2012
We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
KevinI have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas -
CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM
I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM
-
Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2
I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
past that.
In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
Tried all things explained here but didn't work
KrisSI voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
@Microsoft, as a former PFE I think you could have done better. -
SharePoint Foundation 2010 SP2 running on Windows Server 2012 R2
Hello
I have upgraded a standalone Windows Server 2008 R2 running SharePoint Foundation 2010 SP2 to Windows Server 2012 R2. The upgrade completed OK and SharePoint Foundation 2010 SP2 is running OK as before upgrade.
Is anyone aware of any issues running SPF 2010 SP2 on WS2012 R2?Hi
no issues using SP2
For more details check this official doc
http://support.microsoft.com/kb/2724471
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you. -
Install SQL Server 2014 in Windows Server 2012 R2
Hi,
I had install a Windows server 2012 R2 Standard version in my VM and i make it as my domain server as well. I had create another account "ABC" and login with this new created account "ABC" in the same machine to install SQL server 2014,
it give me a warning for rule "Computer domain controller" which I understand that I'm installing the SQL server in the domain controller is not recommended. I continue to install and when reach to Server Configuration, I found that SQL Server Analysis
Service account is missing where I cannot found it.
May I know is there any features that I missing or any way to make it done?
Thank you.I found that SQL Server Analysis Service account is missing where I cannot found it.
May I know is there any features that I missing or any way to make it done?
Thank you.
IIRC (If I remember correct)Configuring Analysis service account is after you have passed the Server configuration page. Did you selected analysis service checkbox when on feature selection page. What editoon of SQL server 2014 you are installing are
you installing express edition ? SSAS is not present in express edition
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles
Maybe you are looking for
-
I have music on my iPad, but I can no longer find it in itunes on my mac. How do I get those "CDs" back in my library? I cannot listen to them on my Mac or put them on another device!
-
[ Mac OS 10.4.8 - G$ QuickSilver Dual 2.0 - two large monitors ] I just tried Lightroom for the first time today, and was shocked to see that there is no support for detaching panels onto a second monitor. This is a deal-breaker for me -- lots of gli
-
BB Mac Desktop Manager -- Developer Team Lead -- Help Wanted
This guy has a hard job. Start from scratch to meet an arbitrary deadline to get an arbitrary software package out. This software is nothing. Dear RIM, please give this guy & his developer team the support they need to do the job right. Thank you!
-
Hi Gurus I am trying to compile a simple java code,it compiles properly.But I am not able to run it. the error is below. C:\javaTest>java GraphTester Exception in thread "main" java.lang.NoClassDefFoundError: GraphTester (wrong me: javaTest/GraphTest
-
When I try to view a document the reader opens then closes without displaying the document, why?