FGAC with Flashback queries

Hi! All,
I was just wondering whether we could use FGAC (Fine Grained Access control or VPDs) with Flashback queries.
Example: 1) User 1 performs changes to a table on rows that he owns in a DB
2) User 2 performs changes to a different set of rows on the same table that he owns.
3) User 1 does a flash back query to undo his changes.
4) Will user 2's changes be affected by the flashback done by user 1?
Thanks

Thanks Justin for the reply.
sorry i didn't explain the this paet.
FGAC - comes into the picture, basically transaction would be identified by user's that would be set thru context. So user2 cannot see user1's data. we got FGAC working, but now the problem is rollbacking the data.
We are building a Testing frame work, where developers would run different testcases and then we want the data to be rollbacked to the original state.
Savepoints won't work as Commits will remove the savepoints, but we could consider that as an alternate if nothing else will work !
I tried flashbacking the tables to point in time but the problem is we would have to manually apply all the changes to all the tables....any help ??

Similar Messages

Bursting a report with multiple queries

Hi,
I need to set-up bursting in BIP for a report with multiple queries. The output format is pdf and delivery is through e-mail. Since the queries need to be linked, I'm trying to do this using data template. I've set-up split and burst based on a field (store_id) from the first query which is used as a bind variable in the subsequent queries. So I'd ideally want the report to be split based on store_id. The report works fine if I use a parameter for store_id and view the output by store_id. When I try to schedule the report for bursting, it generates and e-mails the reports but only the last report appears to have correct data output while the others have only the output from the first query (and all other queries appear to return nothing in the report).
Any suggestions on what could be the issue here? Thanks!
Here is the data template for the report:
<dataTemplate name="Report" description="Report" dataSourceRef="ReportDB">
<dataQuery>
<sqlStatement name="STORE_VENDOR">
<![CDATA[SELECT STORE.STORE_ID Q1_STORE_ID, VENDOR.VENDOR_ID Q1_VENDOR_ID, VENDOR.VENDOR_DESC Q1_VENDOR_DESC, PERSON.NAME Q1_NAME
               FROM STORE, SERVICE_TICKET, VENDOR, ROLE, ROLE_TYPE, PERSON, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET.SOURCE_ID = VENDOR.SOURCE_ID AND SERVICE_TICKET.VENDOR_ID = VENDOR.VENDOR_ID)
               AND (STORE.SOURCE_ID = ROLE.SOURCE_ID AND STORE.STORE_ID = ROLE.STORE_ID)
               AND (ROLE.SOURCE_ID = ROLE_TYPE.SOURCE_ID AND ROLE.ROLE_TYPE_ID = ROLE_TYPE.TYPE_ID AND ROLE_TYPE.TYPE_DESC = 'PIC')
               AND (ROLE.SOURCE_ID = PERSON.SOURCE_ID AND ROLE.PERSON_ID = PERSON.PERSON_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               GROUP BY STORE.STORE_ID, VENDOR.VENDOR_ID, VENDOR.VENDOR_DESC, PERSON.NAME
               ORDER BY STORE.STORE_ID]]>
</sqlStatement>
<sqlStatement name="WO">
<![CDATA[SELECT STORE.STORE_ID Q3_STORE_ID, 'Nightly Cleaning' Q3_NIGHTLY_CLEANING, 'Nightly Cleaning' Q3_DESCRIPTION, SERVICE_TICKET.TICKET_ID Q3_TICKET_ID, TO_CHAR(SERVICE_TICKET.END_DATE, 'MM/DD/YYYY') Q3_END_DATE, 'Excellent' Q3_QUALITY_RATING_1, 'Satisfactory' Q3_QUALITY_RATING_2, 'Unsatisfactory' Q3_QUALITY_RATING_3
               FROM SERVICE_TICKET, STORE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4']]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_1">
<![CDATA[SELECT STORE.STORE_ID Q4_STORE_ID, ZONE.ZONE_DESC Q4_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q4_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q4_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q4_WO_END_DATE, 'Excellent' Q4_QUALITY_RATING_1, 'Satisfactory' Q4_QUALITY_RATING_2, 'Unsatisfactory' Q4_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'ABC'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_2">
<![CDATA[SELECT STORE.STORE_ID Q5_STORE_ID, ZONE.ZONE_DESC Q5_ZONE_DESC, SERVICE_TICKET_LINE.SERVICE_COST Q5_SERVICE_COST, SERVICE_TICKET_LINE.TICKET_ID Q5_TICKET_ID, TO_CHAR(SERVICE_TICKET_LINE.WO_END_DATE, 'MM/DD/YYYY') Q5_WO_END_DATE, 'Excellent' Q5_QUALITY_RATING_1, 'Satisfactory' Q5_QUALITY_RATING_2, 'Unsatisfactory' Q5_QUALITY_RATING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'XYZ'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TICKET_LINE.SOURCE_ID, SERVICE_TICKET_LINE.TICKET_ID, SERVICE_TICKET_LINE.LINE_ID]]>
</sqlStatement>
<sqlStatement name="SERVC_TYPE_3">
<![CDATA[SELECT STORE.STORE_ID Q6_STORE_ID, ZONE.ZONE_DESC Q6_ZONE_DESC, 'Excellent' Q6_QUALITY_RATING_1, 'Satisfactory' Q6_QUALITY_RATING_2, 'Unsatisfactory' Q6_QUALITY_RATING_3, 'One' Q6_QTY_MISSING_1, 'Two' Q6_QTY_MISSING_2, '3 or More' Q6_QTY_MISSING_3
               FROM SERVICE_TICKET_LINE, SERVICE_TICKET, STORE, SERVICE_TYPE, ZONE, PERIOD PERIOD_FROM, PERIOD PERIOD_TO
               WHERE (SERVICE_TICKET.SOURCE_ID = SERVICE_TICKET_LINE.SOURCE_ID AND SERVICE_TICKET.TICKET_ID = SERVICE_TICKET_LINE.TICKET_ID)
               AND (SERVICE_TICKET.SOURCE_ID = STORE.SOURCE_ID AND SERVICE_TICKET.STORE_ID = STORE.STORE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = SERVICE_TYPE.SOURCE_ID AND SERVICE_TICKET_LINE.SERVICE_TYPE_ID = SERVICE_TYPE.TYPE_ID)
               AND (SERVICE_TICKET_LINE.SOURCE_ID = ZONE.SOURCE_ID AND SERVICE_TICKET_LINE.ZONE_ID = ZONE.ZONE_ID)
               AND SERVICE_TYPE.TYPE_DESC = 'PQR'
               AND SERVICE_TICKET.START_DATE BETWEEN PERIOD_FROM.START_DATE AND PERIOD_TO.END_DATE
               AND STORE.STORE_ID = :Q1_STORE_ID
               AND PERIOD_FROM.PERIOD_DESC = 'Cal Week 1'
               AND PERIOD_TO.PERIOD_DESC = 'Cal Week 4'
               ORDER BY SERVICE_TYPE.TYPE_ID]]>
</sqlStatement>
</dataQuery>
<dataStructure>
     <group name="G_STORE_VENDOR" source="STORE_VENDOR">
          <element name="Q1_STORE_ID" value="Q1_STORE_ID"/>
          <element name="Q1_VENDOR_ID" value="Q1_VENDOR_ID"/>
          <element name="Q1_VENDOR_DESC" value="Q1_VENDOR_DESC"/>
          <element name="Q1_NAME" value="Q1_NAME"/>
     </group>
     <group name="G_WO" source="WO">
          <element name="Q3_NIGHTLY_CLEANING" value="Q3_NIGHTLY_CLEANING"/>
          <element name="Q3_DESCRIPTION" value="Q3_DESCRIPTION"/>
          <element name="Q3_TICKET_ID" value="Q3_TICKET_ID"/>
          <element name="Q3_END_DATE" value="Q3_END_DATE"/>
          <element name="Q3_QUALITY_RATING_1" value="Q3_QUALITY_RATING_1"/>
          <element name="Q3_QUALITY_RATING_2" value="Q3_QUALITY_RATING_2"/>
          <element name="Q3_QUALITY_RATING_3" value="Q3_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_1" source="SERVC_TYPE_1">
          <element name="Q4_ZONE_DESC" value="Q4_ZONE_DESC"/>
          <element name="Q4_SERVICE_COST" value="Q4_SERVICE_COST"/>
          <element name="Q4_TICKET_ID" value="Q4_TICKET_ID"/>
          <element name="Q4_WO_END_DATE" value="Q4_WO_END_DATE"/>
          <element name="Q4_QUALITY_RATING_1" value="Q4_QUALITY_RATING_1"/>
          <element name="Q4_QUALITY_RATING_2" value="Q4_QUALITY_RATING_2"/>
          <element name="Q4_QUALITY_RATING_3" value="Q4_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_2" source="SERVC_TYPE_2">
          <element name="Q5_ZONE_DESC" value="Q5_ZONE_DESC"/>
          <element name="Q5_SERVICE_COST" value="Q5_SERVICE_COST"/>
          <element name="Q5_TICKET_ID" value="Q5_TICKET_ID"/>
          <element name="Q5_WO_END_DATE" value="Q5_WO_END_DATE"/>
          <element name="Q5_QUALITY_RATING_1" value="Q5_QUALITY_RATING_1"/>
          <element name="Q5_QUALITY_RATING_2" value="Q5_QUALITY_RATING_2"/>
          <element name="Q5_QUALITY_RATING_3" value="Q5_QUALITY_RATING_3"/>
     </group>
     <group name="G_SERVC_TYPE_3" source="SERVC_TYPE_3">
          <element name="Q6_ZONE_DESC" value="Q6_ZONE_DESC"/>
          <element name="Q6_QUALITY_RATING_1" value="Q6_QUALITY_RATING_1"/>
          <element name="Q6_QUALITY_RATING_2" value="Q6_QUALITY_RATING_2"/>
          <element name="Q6_QUALITY_RATING_3" value="Q6_QUALITY_RATING_3"/>
          <element name="Q6_QTY_MISSING_1" value="Q6_QTY_MISSING_1"/>
          <element name="Q6_QTY_MISSING_2" value="Q6_QTY_MISSING_2"/>
          <element name="Q6_QTY_MISSING_3" value="Q6_QTY_MISSING_3"/>
     </group>
</dataStructure>
</dataTemplate>

Hello user6428199,
When you use ":Q1_STORE_ID" in your queries, BI Publisher looks for a report parameter named Q1_STORE_ID. Change all your report queries to get data for all the store_id's available. As you are bursting the report using the store_id as the bursting key, BI Publisher will split the report based on the stored_id and delivers content based on it. No matter how many queries you may have, BI Publisher will loop through all the store_id's available and all the queries will return data for that particular id in a report.
Thanks,
Machaan

Report with Multiple queries too slow in BI Publisher 11g

Hi, I have a report in 11g where i need to create multiple queries to show them in report. I tried to combine everything in one query, but i found that the query is too huge and hard to understand and maintain. I created 3 data sets and linked them together. In SQL dev, the main query is returning about 315 records and first detail query returns less than 100 records and second detail query is returning one record which is BLOB. Each query returns data within a couple of seconds from SQL Developer. The entire report from BI Publisher should be just 21 page PDF output. Did anyone face performance issues while running reports with multiple queries in 11g? I ran reports that have single query which returned 10K pages PDF and never had an issue while everthing is in one query. This is the first time Iam attempting to create multiple queries. Can someone help me understand what i might be doing wrong or missing here. Thank you.

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

Im trying to reorder divs when in the mobile version of my site, is it possible to do it with media queries?

Im trying to reorder divs when in the mobile version of my site, is it possible to do it with media queries? Here is the layout in desktop view, red being what would be images. And when i rescale, the content stacks together to place two of the same boxes together, like so;
Is it possible to apply a rule so when scaled the boxes reorder to show red, black, red, black, red, black?

<div class="productcontainer3">
<div class="product3"></div>
</div>
<div class="productcontainer4">
<div class="product4"><h6>Manta Soledo</h6><p1>In here will be the Manta blurb! Not too much technical info, save that for product page. Make it sleek and elegant. </p1></div>
</div>
<div class="productcontainer1">
<div class="product1"><h6>Manta Soledo</h6><p1> In here will be the Manta blurb! Not too much technical info, save that for product page. Make it sleek and elegant.</p1> </div>
</div>
<div class="productcontainer2">
<div class="product2"></div>
</div>
<div class="productcontainer5">
<div class="product5"></div>
</div>
<div class="productcontainer6">
<div class="product6"><h6>Manta Soledo</h6><p1>In here will be the Manta blurb! Not too much technical info, save that for product page. Make it sleek and elegant. </p1></div>
.productcontainer1 {
float: left;
clear: both;
max-width: 604px;
width: 49%;
margin-right: 1%;
margin-bottom: 4%;
margin-top: 1%;
@media all and (max-width: 600px) {
.productcontainer1 {
width: 100%;
.productcontainer2 {
float: left;
max-width: 604px;
width: 49%;
margin-bottom: 4%;
margin-top: 1%;
@media all and (max-width: 600px) {
.productcontainer2 {
width: 100%;
.productcontainer3 {
float: left;
clear: both;
max-width: 604px;
width: 49%;
margin-right: 1%;
margin-bottom: 4%;
@media all and (max-width: 600px) {
.productcontainer3 {
width: 100%;
.productcontainer4 {
float: left;
max-width: 604px;
width: 49%;
margin-bottom: 4%;
@media all and (max-width: 600px) {
.productcontainer4 {
width: 100%;
.productcontainer5 {
float: left;
clear: both;
max-width: 604px;
width: 49%;
margin-right: 1%;
@media all and (max-width: 600px) {
.productcontainer5 {
width: 100%;
.productcontainer6 {
float: left;
max-width: 604px;
width: 49%;
@media all and (max-width: 600px) {
.productcontainer6 {
width: 100%;
.product1 {
Width: 100%;
padding-bottom: 50%;
float: left;
background-position: center;
    background-size: cover;
    background-repeat: none;
.product2:hover {
background-image:url(../Graphics/iMod-rollover.jpg);
.product2 {
Width: 100%;
background-image:url(../Graphics/iModindex.jpg);
padding-bottom: 50%;
float: left;
background-position: center;
    background-size: cover;
    background-repeat: none;
-webkit-transition: background-image .8s ease-in-out;
-moz-transition: background-image .8s ease-in-out;
-ms-transition: background-image .8s ease-in-out;
-o-transition: background-image .8s ease-in-out;
transition: background-image .8s ease-in-out;
.product3 {
Width: 100%;
padding-bottom: 50%;
float: left;
background-position: center;
    background-size: cover;
    background-repeat: none;
background-image:url(../Graphics/Ilanoindex.jpg);
-webkit-transition: background-image .8s ease-in-out;
-moz-transition: background-image .8s ease-in-out;
-ms-transition: background-image .8s ease-in-out;
-o-transition: background-image .8s ease-in-out;
transition: background-image .8s ease-in-out;
.product4 {
Width: 100%;
padding-bottom: 50%;
float: left;
background-position: center;
    background-size: cover;
    background-repeat: none;
.product3:hover {
background-image:url(../Graphics/Ilano-rollover.jpg);
.product5 {
Width: 100%;
background-image:url(../Graphics/Soledoindex.jpg);
padding-bottom: 50%;
float: left;
background-position: center;
    background-size: cover;
    background-repeat: none;
-webkit-transition: background-image .8s ease-in-out;
-moz-transition: background-image .8s ease-in-out;
-ms-transition: background-image .8s ease-in-out;
-o-transition: background-image .8s ease-in-out;
transition: background-image .8s ease-in-out;
.product5:hover {
background-image: url(../Graphics/Soledorollover.jpg);
.product6 {
Width: 100%;
padding-bottom: 50%;
float: left;
background-position: center;
    background-size: cover;
    background-repeat: none;

Want to use ldb selection screen with select queries

I want to use ldb selection screen with select queries since ldb having performance issue .How can I use the fields of the dynamic selection of LDB in the select queries

Hi,
Check the code snippet below: Here 'XXXX' is the table for your select query.
DATA L_DS_CLAUSES TYPE RSDS_WHERE.
MOVE 'XXXX' TO L_DS_CLAUSES-TABLENAME.
READ TABLE DYN_SEL-CLAUSES WITH KEY L_DS_CLAUSES-TABLENAME
                             INTO L_DS_CLAUSES.
SELECT * FROM XXXX
          WHERE field1 IN ...
           AND   field2 ....
           AND (L_DS_CLAUSES-WHERE_TAB).
      PUT XXXX.
ENDSELECT.
You can also try using the FM 'RS_REFRESH_FROM_DYNAMICAL_SEL' passing SY-CPROG in curr_report and 'M' for mode to get the dynamic selection screen values.
Regards,
Munesh.

What is the risk, and how to detect, Trojan infection with Flashback/Flashfake? (PowerMac G5 OS X 10.5.8)

What is the risk, and how to detect, Trojan infection with Flashback/Flashfake? (PowerMac G5 OS X 10.5.8)

Hey Kappy, without even looking I can tell you anything is better than the GeForce4MX cards, but see
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
Rated slowest on top, fastest on bottom, hopefully japamac will drop in shortly.
Oh, & they need way more RAM...
http://www.everymac.com/systems/apple/powermac_g4/specs/powermac_g4_933_qs.html
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=155&type=Memory

Poor Performance 7.0 Workbook with multiple queries

Hi all,
I've got the following issue. Our users have workbooks which contain serveral queries on different sheets. (One on each workbook sheet)
When a workbook contains 5 or more queries, the overall workbook performance will decrease drastically. Workbook with 8 or more queries result in time-outs and messages like unsufficient shared memory.
Does anyone have the same kind of problems with multiple queries in a Bex 7.0 workbook? Do any one have a solution?
Any suggestions are welcome.
Thanks!
Cheers,
Ron

Bill,
Tried to make a workbook according to your advise. It certainly makes a difference in workbook size. The new workbook is 50% smaller than the older version based on the standard SAP template.
However, my workbook contains 17 queries, and after 5 minutes it breaks the BW connection. So basic conclusion is that BW 7.0 workbook can't work with a large number of dataproviders/ queries. This did work in BEx BW 3.x.
If any one has any other suggestion, more than welcome.
Cheers,
Ron

Workbook with multiple queries on multiple tabs

Scenario: There is a workbook with multiple queries on multiple tabs.
In 3.x, it was possible to refresh only a select query within the WB but I'm not finding this to be the case in the NW04s BEx Analyzer. It seems that it will always refresh all queries on all tabs.
Do any of you know a way around this?

Hi Bigtoja (and others).
This is not possible in BI/2004s.
Please refer to https://websmp106.sap-ag.de/~sapidb/011000358700004483762006E page 23. It seems that it will be implemented in a stack sometime in 2008.
BR
Stefan

Creating report with multiple queries in clear quest

Hi,
I am new to reports and currently working with creating reports that connect to clear quest(CQ).
I have successfully created several reports, that connect to the CQ, but they all have data from only one query.
Now I am trying to create a slightly complex report where I need to fetch data from multiple queries. All these queries use 2 parameter to filter their data. I have dynamic cascading parameters to get them. When just connecting they all work ok. I used the link tab to link them to two fields of one query, to make sure that they all filter to fields from same query.
The problem is when I drop the fields from the various queries on the form, the data is fetched multiple times.
I also played with links to make them outer links but in that case I get error and unable to run the report completely.
Any ideas on how to work with multiple queries and provide same parameters to all of the queries?
Thanks in advance.
-PAP

- How do I make sure that the relationship is not one to many?
You don't. That's the nature of the data. For example a single person can order multiple items. A simple one to many relationship.
- In the link tab, I can only point to queries, is there a way I can point the fields to report params?
You should be seeing tables... I think you're having a tough time with the basic terminology.
- How does these Enforce Joins (4 options) work.
There is rarely if ever any reason to switch from the default "not enforced". Leave it alone. The only one you'll touch 90% of the time is the Join Type.
PAP,
Based on the questions you're asking, it sounds like you are missing some major database fundamentals. My suggestion would be to step away from CR for the time being and read a little bit about relational databases (what makes them relational) and database normalization. This will also give you an idea about the various join types and when to use one over the other.
You can know every feature and function in CR, but until you have at least a basic knowledge of how data relates, you'll never pull in the data you need.
Jason

I have a report with 2 queries and prompts on same object tell me how many times it request for I/P?

Hi
i have a report with 2 queries and prompts on same object tell me how many times it request for I/P? can any one please guide me.
Regards,
Mahendra

Is this question related to Dashboards or webi ?

Help with these queries

Hi all,
I need a help with these queries, because is happening a strange problem when I try to execute it.
This first query is executed faster than the other one, around 30 minutes faster.
The queries are the same, but there is a single difference, I switch the hard code value '5.93218%' in a like condition by a variable P_COD_RAIZ || '%', because it can't be hard code.
SELECT max(oh.ohipp) as mesano_ultfatura
INTO V_MESANO_FATURA
FROM sysadm.orderhdr_all@dl_bsc oh,
customer_all@dl_bsc ca
WHERE ca.custcode like '5.93218%'
and ca.customer_id = oh.customer_id
and oh.ohipp = (select max(yy.ohipp)
from orderhdr_all@dl_bsc yy
where yy.customer_id = oh.customer_id
and oh.ohinvtype = 5);
SELECT max(oh.ohipp) as mesano_ultfatura
FROM sysadm.orderhdr_all@dl_bsc oh,
customer_all@dl_bsc ca
WHERE ca.custcode like P_COD_RAIZ || '%'
and ca.customer_id = oh.customer_id
and oh.ohipp = (select max(yy.ohipp)
from orderhdr_all@dl_bsc yy
where yy.customer_id = oh.customer_id
and oh.ohinvtype = 5);
What I want to know is, why the execution time of the second query is greater than the first, if the only difference between it is a variable instead of hard code?
Thanks,
Murilo.

I assume column custcode is also varchar2. Then it looks like a problem with bind values and not evenly distributed data.
When you first run the query with the parameter = '5%' you may get many values and another execution plan as with '5.93218%' on a second run. However the execution plan is saved between the first and second run and not adopted to the new values.
There are ways out of this "bind" problem. But all have to do with providing us a good execution plan first.
However you can start by yourself with forcing the use of the index on the column custcode.

Map the user exit variables with the queries/cubes using them

Hello Friends,
What are the post unicode conversion tests that you can perform on front end/existing queries?
is there any added advantage for queries due to unicode?
is testing the working of variable enough? is there any table to map the user exit variables with the queries/cubes using them?
Thanks
Tanya

Guys, any clue about this? Answer are appreciated.
Thanks
Tanya

How to create a graph(9i reports) with 3 queries in 1 Chart

Hi, i have 3 query's which creates three groups.
The x-as is de month,month1,month2.
The Y-as ClaimsInEURO.
There has to be one BAR which displays the top10 reasons.
And two lines one with Total Claim and one with SUM Claim.
Can onyone explain me the settings and especially how to set the groups?

Hi,
You may not be able to create one graph with multiple queries. You must get all the data into ONE query, and create a graph based on that query.
Navneet.

(Urgent)Report with 2 Queries

Hi all,
I have a report which run from 3 tables: STUMST (student master table), STUDET (student detail table) and STUREDET (student result detail table). The STUMST is the parent table which has a child called STUDET. STUDET has a child which is STUREDET.
STUMST---> STUDET ---> STUREDET
The query I have written will select the records from the STUREDET. These records will be displayed in the repeating frame of the report. The report will be generated by 1 student name (or student ID) per page.
Let say I have found 4 records matching with the STUDENT_ID from STUREDET. Due to certain conditions, I need to take the records from STUDET, parent of STUREDET. The desired result from the STUDET is actually 2 records which is matching with the STUDENT_ID. How do I "go back" to the parent table?
Please help. Thank you in advance.
Cheers,
Joey

Are the queries producing independent results or are they tied to each others' results?
If they are tied to each other, you would be better building them in BI Publisher proper as that is the easiest way to build reports with linked queries (probably as a Data Template). Then once it works there, just generate a link document only to the report and put that in your apex page. However there is a catch, for security you would really need to be running SSO through OID so that once users login to APEX they are also logged in to the report server.
I have a similar question out on the forums (APEX Downloadable Reports is why I say this. Maybe someone else has a better answer but as far as I have been able to find out when the queries are closely tied to each other the only true answer is to build the report directly in BI Publisher.

Responsive Background Images with Media Queries

Hello,
I'm creating a mobile website in Dreamweaver and would like to use an image which will change with different device widths. I'm using media queries with background images. My problem is that in order for the background images to display, I need to assign a height to the div. When the image is scaled down the height stays static, leaving white space beneath it. There will be content below the image so the white space will push it down and look wrong. Is there a way to use multiple images with media queries keeping the height responsive? Thank you!
@media screen and (max-width: 1024px) {
#mainImage {
          background-image: url(../images/mainImageLarge.jpg);
          background-repeat: no-repeat;
          background-position: center top;
          background-size: 100%;
          height: 272px;
          border-top-width: 3px;
          border-top-style: solid;
          border-top-color: #FFF;
@media only screen and (max-width : 480px) {
#mainImage {
          background-image: url(../images/mainImageMed.jpg);
          background-repeat: no-repeat;
          background-position: center top;
          background-size: 100%;
          height: 107px;
          border-top-width: 3px;
          border-top-style: solid;
          border-top-color: #FFF;
@media only screen and (max-width : 320px) {
          #mainImage img {
          background-image: url(../images/mainImageSmall.jpg);
          background-repeat: no-repeat;
          background-position: center top;
          background-size: 100%;
          height: 150px;
          border-top-width: 3px;
          border-top-style: solid;
          border-top-color: #FFF;

Like this example:
http://alt-web.com/FluidGrid/Fluid-4.html
METHOD:
Insert 2 images -- one for desktops and one for mobile. Assign classes to each image.
<img id="banner" class="desktop" src="desktop_image.jgp" />
<img id="banner" class="mobile" src="mobile_image.jpg"/>
In your CSS, use display:none and display:block to show/hide.
.desktop {
    display:block;
.mobile {
    display:none;
/* Special Rules for mobiles */
@media only screen and (max-width: 480px) {
    .desktop {display:none}
    .mobile {display:block}
Feel free to set your break points however you wish.
Nancy O.

FGAC with Flashback queries

Similar Messages

Maybe you are looking for