Field catlog Change

HI all,
I am working on Interactive ALV. I am going to add 1 field to secondary list.
When ever i click on Any filed in the basic list, the added filed is appearing in every seconadry list. But my req is When i click on perticular filed only, the added filed has to appear.
How can i change the field catlog?
regards,Ram

Hi,
In the event handler, toggle the NO_OUT field ( with 'X' and space ) in the Fieldcatalog and refresh the table display (If needed).
Regards,
Basu.

Similar Messages

Change field catlog after the first display

Hello,
I am trying to change field catlog after the first display.
Problem I am facing is at runtime fild catlog is not changing. Could some one suggest where I might have gone wrong.
Thanks in advance.
Regards,
Vimal.
IF sy-ucomm = 'CATLOG'.
    CALL METHOD g_alv_grid->get_frontend_fieldcatalog
      IMPORTING
        et_fieldcatalog = it_fieldcat[].
    LOOP AT it_fieldcat INTO str_fcat .
      IF str_fcat-fieldname = 'EBELP' .
        str_fcat-hotspot = 'X' .
        MODIFY it_fieldcat FROM str_fcat .
      ENDIF .
    ENDLOOP .
    CALL METHOD g_alv_grid->set_frontend_fieldcatalog
      EXPORTING
        it_fieldcatalog = it_fieldcat[].
ENDIF.

In that You change the Field catalog and
call this method..
CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
    EXCEPTIONS
      FINISHED = 1
      OTHERS   = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
try this...

FBL3N - ALV Field Catlog

I have modified the FBL3N standard Zprogram RFITEMGL to add some fields for display in the report. I have changed the input parameters for the Function Module FI_ITEMS_DISPLAY in RFITEMGL like it_items = My_table_item to display modified table values. But when I try to append the field catlog gt_fieldcat using the following code I am not able to see these fields in the report layout but I have it in My_table_item.
gt_fieldcat-TABNAME = 'IT_POS1'.
gt_fieldcat-FIELDNAME = 'NAME1'.
gt_fieldcat-OUTPUTLEN = '20'.
gt_fieldcat-SELTEXT_L = 'Vendor Name'.
APPEND GT_FIELDCAT.
gt_fieldcat-TABNAME = 'IT_POS1'.
gt_fieldcat-FIELDNAME = 'MAKTX'.
gt_fieldcat-OUTPUTLEN = '20'.
gt_fieldcat-SELTEXT_L = 'Material Desc.'.
APPEND GT_FIELDCAT.
What Should I do? Kindly help me

Hi,
Just check your code in subroutines
perform make_fieldcatalog
perform make_fieldcatalog2
There may be chance that it is getting deleted in another routine. Also this program used REUSE_ALV_FIELDCATLOG_MERGE
check how it is populating values.
Regards,
Atish

Problem in ALV Field catlog

Hi Experts,
I have an internal table with 20 fields, i used that internal table in REUSE_ALV_FIELDCATALOG_MERGE.
It's diplayed the output properly. But now i added a new field in the internal table, but its not displaying inthe output even its not comming in the field catlog itself. How to add this one field inthat field catlog list?
FORM build_field_catalog TABLES   r_field_cat LIKE g_field_cat[].
CLEAR r_field_cat[].
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = g_repid
      i_internal_tabname     = 'IT_DATA'
      i_client_never_display = 'X'
      i_bypassing_buffer     = 'X'
      i_inclname             = g_include
    CHANGING
      ct_fieldcat            = r_field_cat[].
I used the above code..
Can any one help this issue?
Mohana.

Can u pl tell me how u have declared this new field? If possible pl. paste ur code.
If it is declared with TYPE statement then may be the REUSE_ALV_FIELDCATALOG_MERGE cannot process it. It should be declared with LIKE statement.
Pl. check.
Regards,
Joy.

Query regarding in Field catlog of my oops report

Hi Experts,
i developed a program to maintain ZTABLE. When we excute the report i need all fields of table should be non-editable.I done this. but when choose CREATE NEW ENTRY icon all fields should be editable.
How can i done this dynamical field catlog setting..
Thanks in Advance...
Siva.

hi
go through this code this is for editable alv
*& Report ZDEMO_ALVGRID_EDIT                                          *
*& Example of a simple ALV Grid Report                                 *
*& The basic ALV grid, Enhanced to display specific fields as          *
*& editable depending on field value                                   *
REPORT ZDEMO_ALVGRID_EDIT                 .
TABLES:     ekko.
TYPE-POOLS: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat,     "slis_t_fieldcat_alv WITH HEADER LINE,
      wa_fieldcat TYPE lvc_s_fcat,
      gd_tab_group TYPE slis_t_sp_group_alv,
      gd_layout    TYPE lvc_s_layo,     "slis_layout_alv,
      gd_repid     LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM set_specific_field_attributes.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
wa_fieldcat-fieldname   = 'EBELN'.
wa_fieldcat-scrtext_m   = 'Purchase Order'.
wa_fieldcat-col_pos     = 0.
wa_fieldcat-outputlen   = 10.
wa_fieldcat-emphasize   = 'X'.
wa_fieldcat-key         = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'EBELP'.
wa_fieldcat-scrtext_m   = 'PO Item'.
wa_fieldcat-col_pos     = 1.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'STATU'.
wa_fieldcat-scrtext_m   = 'Status'.
wa_fieldcat-col_pos     = 2.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'AEDAT'.
wa_fieldcat-scrtext_m   = 'Item change date'.
wa_fieldcat-col_pos     = 3.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'MATNR'.
wa_fieldcat-scrtext_m   = 'Material Number'.
wa_fieldcat-col_pos     = 4.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'MENGE'.
wa_fieldcat-scrtext_m   = 'PO quantity'.
wa_fieldcat-col_pos     = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'MEINS'.
wa_fieldcat-scrtext_m   = 'Order Unit'.
wa_fieldcat-col_pos     = 6.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'NETPR'.
wa_fieldcat-scrtext_m   = 'Net Price'.
wa_fieldcat-edit        = 'X'. "sets whole column to be editable
wa_fieldcat-col_pos     = 7.
wa_fieldcat-outputlen   = 15.
wa_fieldcat-datatype     = 'CURR'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname   = 'PEINH'.
wa_fieldcat-scrtext_m   = 'Price Unit'.
wa_fieldcat-col_pos     = 8.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra             = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
       EXPORTING
            i_callback_program      = gd_repid
           i_callback_user_command = 'USER_COMMAND'
            is_layout_lvc               = gd_layout
            it_fieldcat_lvc             = it_fieldcat
            i_save                  = 'X'
       TABLES
            t_outtab                = it_ekko
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
   UP TO 10 ROWS
    FROM ekpo
    INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form set_specific_field_attributes
      populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The NETPR field/column has been set to editable in the fieldcatalog...
The following code sets it to be disabled(display only) if 'NETPR'
is gt than 10.
LOOP AT it_ekko INTO wa_ekko.
    IF wa_ekko-netpr GT 10.
      ls_stylerow-fieldname = 'NETPR' .
      ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
                                             "set field to disabled
      APPEND ls_stylerow TO wa_ekko-field_style.
      MODIFY it_ekko FROM wa_ekko.
    ENDIF.
ENDLOOP.
endform.                    " set_specific_field_attributes
regards
anil chaudhary

Field catlog in V/03

Hi,
Can we add new field catlog in the list (V/03 - create table)?
if yes how can we add?
regards,
Akshay

Hi,
For adding field into Field catalogue:
For example if you want to use field PSTYV ('Sales document item category') that is included in structure KOMP ('Pricing Communication Item') as a key for a condition table.
When you create a condition table (Transaction V/03), however, the system does not propose the field in the field catalog.
Prerequisites:
For technical reasons, field PSTYV was included in structure KOMP, however, not in structure KOMG ('Allowed Fields for Condition Structures').
To solve the problem, proceed as follows:
1. Call up the ABAP Dictionary (Transaction SE11) and create data type ZZPSTYV. Choose PSTYV as a domain.As a short text, you can use, for example, 'ZZ - sales document item category' and as a field label, you can use the field labels of PSTYV.Save, check and activate your entries.
2. Call up structure KOMPAZ in the ABAP Dictionary (Transaction SE11) in the change mode and make the following entry:
Component   Component type
ZZPSTYV     ZZPSTYV
Save, check and activate the change you made.
3. Note:Because of the change in structure KOMPAZ, field ZZPSTYV is now known in structures KOMG and KOMP because structure KOMPAZ is included in both structures.
4. Call up Transaction SPRO. Navigate to 'Sales and Distribution -> Basic Functions -> Pricing -> Pricing Control' and execute 'Define Condition Tables'. Choose 'Conditions: Allowed fields' and include ZZPSTYV as a new entry.
5. Note:Now you can use field ZZPSTYV as a key field when you create a condition table Axxx.
6. Supply the new field you defined by including the following source code line in USEREXIT_PRICING_PREPARE_TKOMP:
              MOVE xxxx-PSTYV TO TKOMP-ZZPSTYV.
In order processing you find the user exit in Include MV45AFZZ, and in billing document processing you find it in Include RV60AFZZ.
Consider that you can also use this note as a help if you want to use other customer-specific fields as key fields in a condition table.For header fields, use structure
KOMKAZ instead of structure KOMPAZ and USEREXIT_PRICING_PREPARE_TKOMK instead of USEREXIT_PRICING_PREPARE_TKOMP.
For more information, see Transaction SPRO via the path 'Sales and Distribution -> System Modifications -> Create New Fields (Using Condition
Technique) -> New Fields for Pricing' and Note 21040.
Regards

What is field catlog...

Hi all,
   anybody explain field catelog.
    how to use in reports,what is the use of field catlog.
regards.
krish

Maintaining the Field Catalog
Storing aspect fields in the field catalog
The characteristics and basic key figures are stored in a field catalog when they are saved. This catalog can be seen as a EC-EIS/EC-BP-specific supplement to the ABAP Dictionary. Report-relevant attributes for the fields are also stored in the field catalog. The field catalog is aspect-independent. Once a field is contained in the field catalog, it may be copied to other aspects but may no longer be changed. This guarantees a uniform, cross-area use of evaluation groups and key figures.
You can create field groups to structure the fields in the field catalog. A Field Group is a user-defined grouping of characteristics and basic key figures.
Reorganization of the field catalog
The field catalog and ABAP Dictionary information on the aspect data structures must be consistent with one another - each data structure field must also exist in the field catalog. If this is no longer the case, you should reorganize the field catalog in order to restore the consistency. When you do this, the system reads the aspect structure from the ABAP Dictionary and reconciles it with the field catalog.
Deleting fields from the field catalog
Characteristics and basic key figures, that are no longer used in any aspect, can be deleted from the field catalog. Any relevant master data, comments, generated ABAP Dictionary objects will be deleted at the same time.
You can find more information on the field catalog in Customizing.
We can implement Field catalog by calling Function modules or classes..
See the sample code
REPORT ALV_FM.
TYPE-POOLS: SLIS.
DATA:
BEGIN OF FS_SPFLI,
    CARRID    TYPE SPFLI-CARRID,
    CONNID    TYPE SPFLI-CONNID,
    COUNTRYFR TYPE SPFLI-COUNTRYFR,
    CITYFROM TYPE SPFLI-CITYFROM,
    AIRPFROM TYPE SPFLI-AIRPFROM,
    COUNTRYTO TYPE SPFLI-COUNTRYTO,
    CITYTO    TYPE SPFLI-CITYTO,
    AIRPTO    TYPE SPFLI-AIRPTO,
    FLTIME    TYPE SPFLI-FLTIME,
    DEPTIME   TYPE SPFLI-DEPTIME,
    ARRTIME   TYPE SPFLI-ARRTIME,
    DISTANCE TYPE SPFLI-DISTANCE,
    DISTID    TYPE SPFLI-DISTID,
    FLTYPE    TYPE SPFLI-FLTYPE,
    PERIOD    TYPE SPFLI-PERIOD,
END OF FS_SPFLI.
DATA:
T_SPFLI LIKE STANDARD TABLE OF FS_SPFLI.
SELECT * FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE T_SPFLI.
DATA: T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      FS_FIELDCAT LIKE LINE OF T_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
I_CALLBACK_PROGRAM                = ' '
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
   I_STRUCTURE_NAME                  = 'SPFLI'
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
IT_FIELDCAT                       = T_FIELDCAT
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Pavan P.

VA05 - Addiional Fields and Field Catlog

Hello All,
I have added the few Z fields as per requirements in the ALV out put as per the OSS notes 350068.
I need to change the Field catalog for these Z fields. I have one way to change by creating the Zdomain and assiging the same to those Zfields, but is there any other option other than this?
Please let me know.
Also I am having one more issue I have added Ship to party in the selection screen using Config. But when I use that in the section the data is not being picked for hte value enterered there.
REgards
Ramesh

Hello,
Modify the field catlog in the program.

Serv. Desk: Action: send an email only when a value in a field has changed

Hello,
In Soution Manager 4.0, Sevice Desk, I would like to create an action which creates an email only when a value of a certain field has changed.
- only in change mode relevant
- only when a value of one field has changed (e.g. Message Processort has changed from Buss. Partner 4 to 5. Than a mail should be sent to BP 5).
- it should only send this kind of email when the field value has changed in change mode. In other words: it should not sent the email e.g. when the status has changed.
I tried all kinds of things but I do not know on how to define the COnditions for an Action, so I can compare e.g.
if <old value> <> <new value>
Any ideas or experience on how to implement this without major modifications ?
Thanks
Christian

Hi Christian,
check out my question on SDN.
Email on Status Change
it has details on how to send an email when the status changes. I believe you are going to have to do something like this for each of the fields you want to create an Action Starting Condition for.
regards,
Jason

PDF form text fields' options change when opened in READER on a MAC.

I created a PDF form using Adobe X PRO. All fields are UNCHECKED for Property/Options/ "scroll long text". I save and distribute the form as a "reader extended pdf/enable additional features" so it can be saved and returned using READER.
When a Mac user opens the extended form in Adobe READER, ALL the text fields change to scroll. When he returns the completed form to me, every text field, even signature and date fields, are changed to scroll text.
What is happening in the transition from PC to MAC?

Preview is the default PDF viewer on the Mac. It should never be used with PDF forms. Just let them know that they should use Adobe Reader. Provide a link or URL where it can be downloaded and let them know that it's free.
There are things you can do so that it doesn't work in Preview, but it involves some scripting. If interested in this approach, post again.

Update Field On Change For A SQL Query (updateable report)

Hi,
I'd like to request help from anyone with ideas on how to solve this.
We are using APEX 4.2, 10GR2, RedHat5.
I have a report that comes from SQL Query (updateable report).
I'm using the apex_item.text and apex_item.hidden on fields.
I'm using a button to submit and after submit process to add some logic that I need.
There could be 1 - 10 records in the report.
There is only 1 field that is needed to enter a value, but the value of this field determines the value of another field.
I think that I can do this with a submit button and an after submit process where I loop through all the records. I think I have this handled.
This is the question
When the value of that field is changed then the value of another field in the same row changes immediately.
Is this possible?
All the examples I've seen so far are for a single record and that doesn't work for us.
I guess this is a MRU process but I haven't seen an example where a dynamic action is possible on a Multi Row Update.
Could anyone direct me to where I can see an example or help me get directions?
I appreciate all your help an comments and I thank you in advance.

Yes why not...what you looking for is a ajax call
See {message:id=10390979}
Please note:-you can also do this as a dynamic action as shown below
Event: Change
Selection type: jQuery Selector
jQuery Selector: input[name="f01"]
True action with Execute JavaScript Code and put all code inside the test funtion, you may need to amend the code to use this.triggeringElemnt in place of this

Posting Key Field Status changes - unable to generate Transport request

Dear All,
I did posting key field status change from suppress to optional ( P.Key 24).
However I am unable to generate a transport request.
Please share your inputs
Thanks
Sanjai

Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
Regards
Abhay

Suppress Non Changed Fields in change pointer triggered IDOC

I have a requirement to clone message type MATMAS as ZMATMAS. This ZMATMAS is the message type I used to create change pointer triggering outbound idoc for change/create of materials.
When i change a material, all fields are sent instead of the fields only changed(of course key fields should be sent as well). Is there a way via configuration that I can suppress fields which are not changed? Or do i need to clone FM MASTERIDOC_CREATE_SMD_MATMAS and suppress the fields via program
Thanks in Advance!

i'll clarify the requirement again.
Let say i changed a field BRGEW in the material master.
Currently, all the segements which contains BRGEW is sent, but these segements contains other data which are not changed in the material master.
How do i suppress it?
Thanks,

Problems Validating User Fields in Change Lease-Out

Good Morning,
I've defined two Date Fields in Change Lease Out (transaction FOV2).
I need that when the first date field is empty the system returns a error message stating that the first data field should have data.
The second fill can be with or without data.
The problem is that, right now, the system returns the error message in every case except if both fields are filled.
Here is the code done by the developer:
FUNCTION field_exit_usrdate_1.
*"*"Local interface:
*" IMPORTING
*"     REFERENCE(INPUT)
*" EXPORTING
*"     REFERENCE(OUTPUT)
DATA dt_usr08 TYPE vzsort-usr08.
IF input IS INITIAL.
    MESSAGE e005(z3_re).
ENDIF.
SET PARAMETER ID 'DT_USR08' FIELD dt_usr08.
ENDFUNCTION.
Why the system always return the error message except if both the data fields are filled? Any clue?
Best Regards,
Pedro Gaspar

Solved Myself

Adding Custom Fields for Change Request in EHS

Hi,
I need to add custom fields in Change request screen, where I am not able to identify for BO and node to do same.
Its Configuration name /MOC/F_ISS_ROOT_OBJECT_INFO.
I tried with /IAM/ISSUE and /IAM/ACTIVITY BO.. but it is not working.
Not able to identify the correct table for adding fields.Pls help me on the same.
Regards,
Reny Richard

Reny,
Why don't you check for the ST05, so that you can grasp some of the table names. Should be useful to you
http://scn.sap.com/community/abap/testing-and-troubleshooting/blog/2007/09/05/the-sql-trace-st05-quick-and-easy
BR,
RAM.

Field catlog Change

Similar Messages

Maybe you are looking for