Field MWSKZ and related description.

Hi,
in what tables can I found the field MWSKZ (VAT) and the related description?
Best regards

The list below contains this filed in the tables.the description is Taxes on sales/puchases code
/SAPPCE/DPCMWSKZ                 Sales Tax Code for Final Invoice
/SAPPCE/DPCTMWKZ                 Sales Tax Code for Partial Invoice
ALT_MWSKZ                        Alternative Tax Code
AUSMW                            Input VAT Indicator 0 Percent
BAPI_JBD_DTE_MWSKZ               Sales Tax Indicator
CMWSKZFREI                       EDI: Tax Code for Tax-Exempt Transactions
CRMWSKZ                          Card Document: Tax on Sales/Purchases Code
DZMWEA                           Target Tax Code for Deferred EU Acquisition Tax, Output Tax
DZMWEE                           Target Tax Code for Deferred EU Acquisition Tax, Input Tax
DZMWSK                           Target Tax Code (for Deferred Tax)
DZMWSK_007                       Target Taxes on Sales/Purchases Code
FAGL_MWSKZ                       Tax Code
GRP_MWSKZ                        Retail VAT Code
JV_TAXCRP                        CRP Tax Code
JV_TAXIN                         Input Tax Code (Usually used when posting expense)
JV_TAXOUT                        Output Tax Code (Usually used when posting revenue)
J_1AIMWSKP                       Input Tax Code for Inflation Adjustment Documents
J_1AMWSKZ                        Tax code for SD documents
J_1AOMWSKP                       Output Tax Code for Inflation Adjustment Documents
J_1BINMWSKZ                      Tax Code at Goods Receipt
J_1BOUTMWSKZ                     Tax Code at Goods Issue
J_1ITXCODE                       Export tax code
LMWSTKZ                          Input tax indicator for opening entry leasing
MRAUS                            Tax code for foreign country (text)
MRINL                            Domestic tax code (text)
MWKZF                            Input Tax for Travel Flat Rate
MWKZU                            Input Tax for Accommodations per Diem
MWKZV                            Input Tax for Meals per Diem
MWSKX                            Tax Code for Distribution
MWSKZ                            Sales Tax Code
MWSKZAA                          Output tax code - asset is exempt from tax (unused)
MWSKZAG                          Dummy: Is no longer used (3.0)
MWSKZD                           Sales tax code, customer
MWSKZVA                          Input tax code - Assets without input tax
MWSKZ_BNK                        Tax code for delivery costs
MWSKZ_EBBE                       Tax code for bank charges
MWSKZ_FREE                       Tax on Sales/Purchases Code for Non-Tax-Relevant Transaction
MWSKZ_LF                         Agency business: Tax code (input tax)
MWSKZ_MRM                        Tax code
MWSKZ_MRMO                       Obsolete: sales tax code
MWSKZ_NSTA                       Output Tax Code for Non-Taxable Transactions
MWSKZ_NSTV                       Input Tax Code for Non-Taxable Transactions
MWSKZ_RB                         Agency business: Tax code (output tax)
MWSKZ_T                          Transferred Value-Added Tax Indicator
PAUMW                            Input Tax Indicator for Flat-Rate Taxation
REEXFIREFTAXCODE                 Assigned Input Tax Code
REEXFITAXCODE                    Multilevel Tax Code
REEXVALUEADDEDTAX0               OBSOLETE
RM08_MWSKZ                       Tax code
R_MWSKZ                          Tax on sales/purchases code for rounding
SH_TAX_COD                       Shipping/handling tax code
SPSKZ                            Tax Code for Taxes on Bank Charges
STAXA                            Input tax indicator interim expense from incid.expenses
STAXF                            Receivables input tax indicator
STAXK                            Tax code for net expense postings
STEKZ                            Tax Category of the Tax Line Item
VVEFFMWSKZ                       Sales tax code
VVGMWSKZ                         Sales tax indicator setting for commercial rent agreement
VVMSKZ                           Tax code for vendor posting
VVMWSKZ                          Tax code for unqualified down payment
VVMWSKZ0                         Value added tax code with tax rate 0
VVMWSKZUST                       Management contract: Sales tax code (posting to cust. acc.)
VVMWSKZVST                       Management contract: Input tax code (posting to vendor acc.)
VVTAXMWSKZ                       Multilevel Tax Indicator
VVTAXRMWSKZ                      Input Tax Code
VVVSTKZ0                         Input tax indicator with tax rate 0%
VVWMWSKZ                         Sales tax indicator default value for private rent agrmnt
VVXVSTBER                        Input tax indicator for input tax correction postings
WEREEINS                         Input Tax Code for the Posting
WERENULL                         Input tax code with 0 percentage rate
WMWKZ                            Tax code for bill of exchange charges

Similar Messages

Which table stores field names and their description?

When I go to se11; I can get information about a table; its field names and field description.
How can I access same information using an ABP Program? I have a third party tool which connects to SAP; it can pull data from any SAP Table or view. I do not know which table or view stores information displayed in SE11.
Thanks a lot.

Hi zigzagdna,
The field names and their description are strored in table DD03L and DD03T.
SAP DDIC dictionary informations are generally store in DD* tables. You can search this kinds of DD* tables in SE11 using F4 search help.
With Best Regards
Julia

I want to know the table name and field name of this description

i want to know the table name and field names of this description
supplieriddomain

Hi SV,
Try this:
1) Go to SE15 (Repository info system)
2) Expand ABAP Dictionary
3) Expand Fields
4) Click on Table Fields
5) Enter the field name you want to search in field name or use wild cards with keywords in short decription field (like supplier ) and Execute.
OR
If it's a screen field, do a F1 on the field and click on Technical information on the help window popped up from Menu..this will tell you the field name along with structure or table name.
Hope this helps you.
Regards,
Vivek

I want to know the table name and field names of this descriptions

i want to know the table name and field names of this descriptions
FPAApprover.UniqueName,FPAApprover.PasswordAdapter

Hi Ramana,
Go to the system table DD03T , use the table contents..
In the field ' DDTEXT ' , give your keywords...
for ex : say Unique name... as UniqueName* in field DDTEXT
Execute.. u will find the entries....
May be ur problem will be solved...
Thank u...
Reward if useful and close the thread..
Rajiv

UI use my field for drag and relate

Hi.
I am not able to use my own fields I created via UI for drag and relate.
I can hold the left mousebutton pressed on the field but I don't get the
border around the field to drag it.
I know that this is currently not supported by the SDK.
Can you please implement this?
Best regards,
Manuel Marhold
SoftChip EDV-Systeme GmbH
Gutenbergstr. 25
49479 Ibbenbueren GERMANY
Fon: +49 5451-54703-40
Fax: +49 5451-54703-22
Web: www.softchip-edv.de

My suggestion is to move you entire home directory on to the hdd and leave the ssd for the os and your key applications.
How to Move the Home Folder in OS X – and Why
Move your home directory to another location

How to display name of the table and the description and the table type

Hi,
Can you people tell me how to display the name of the table and the description and the table type (View, structure, etc...) used in the program.
I want to display in a list.
Kind Regards

use this program
TABLES : TSTC, tstct.
TABLES : DD03l, DD02l.
DATA : Program like sy-repid.
DATA : BEGIN OF I_FINAL OCCURS 0,
tabname LIKE dd02l-tabname,
TABCLASS LIKE dd02l-tabCLASS,
TEXT LIKE DD02T-DDTEXT,
END OF I_FINAL.
DATA : BEGIN of ITAB Occurs 0,
name like dd02l-tabname,
END OF ITAB.
DATA : TCD(100) TYPE C.
DATA : var1 LIKE dd02l-tabname.
DATA : DESC LIKE TSTCT-TTEXT.
selection-screen skip.
SELECTION-SCREEN : BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : r1 RADIOBUTTON GROUP r DEFAULT 'X'.
Parameters : Tcode like sy-tcode.
selection-screen skip.
PARAMETERS : r2 RADIOBUTTON GROUP r.
Parameters : Prog like sy-repid.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options : Type for dd02l-tabclass .
SELECTION-SCREEN END OF BLOCK B1 .
at selection-screen.
if r1 = 'X' and Tcode is initial.
message e001(00) with 'Enter Transaction Code' .
elseif r2 = 'X' and Prog is initial.
message e001(00) with 'Enter Program Name' .
endif.
START-OF-SELECTION.
if r1 = 'X'.
Prog = ' '.
select single * from TSTC where tcode = tcode.
if sy-subrc = 0.
program = TSTC-PGMNA.
select single TTEXT from tstct into desc where tcode = tcode and SPRSL = 'E'.
else.
Write :/ 'Invalid Transaction Code'.
exit.
endif.
elseif r2 = 'X'.
Tcode = ' '.
program = Prog.
endif.
CALL FUNCTION 'GET_TABLES'
EXPORTING
PROGNAME = Program
TABLES
TABLES_TAB = itab.
if itab is initial.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
ELSE.
PERFORM : categorize.
endif.
END-OF-SELECTION.
LOOP AT I_FINAL.
WRITE :/4 I_FINAL-tabname COLOR 2 INTENSIFIED OFF NO-GAP HOTSPOT ON, 35 I_FINAL-TABCLASS COLOR 2 INTENSIFIED OFF NO-GAP,
50 I_FINAL-TEXT COLOR 2 INTENSIFIED OFF NO-GAP.
ENDLOOP.
AT LINE-SELECTION.
TCD = SY-LISEL.
var1 = TCD+3(30).
set parameter id 'DTB' FIELD VAR1.
call transaction 'SE11' and skip first screen.
TOP-OF-PAGE.
WRITE :/45 'TABLE DETAILS RELATED TO THE TRANSACTION CODE' COLOR 7 .
WRITE :/2 'DATE : ' COLOR 1, SY-DATUM COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TRANSACTION CODE : ' COLOR 1, Tcode COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'TCODE DESCRIPTION : ' COLOR 1, desc COLOR 1 INTENSIFIED OFF NO-GAP.
WRITE :/2 'PROGRAM NAME : ' COLOR 1, PROGRAM COLOR 1 INTENSIFIED OFF NO-GAP.
SKIP 1.
WRITE :/1(140) SY-ULINE.
WRITE :/4 'TABLE NAME' COLOR 5 INTENSIFIED OFF NO-GAP,35 'TABLE TYPE' COLOR 5 INTENSIFIED OFF NO-GAP,
55 'DESCRIPTION' COLOR 5 INTENSIFIED OFF NO-GAP.
WRITE :/1(140) SY-ULINE.
*& Form categorize
text
--> p1 text
<-- p2 text
FORM categorize .
SELECT dd02ltabname dd02ltabCLASS DD02T~DDTEXT
FROM dd02l INNER JOIN DD02T ON dd02ltabname = dd02Ttabname
INTO TABLE I_FINAL
FOR ALL ENTRIES IN itab
WHERE DD02L~TABNAME = ITAB-NAME AND TABCLASS IN TYPE AND DDLANGUAGE = 'E'.
if sy-subrc <> 0.
skip.
skip.
skip.
skip.
skip.
WRITE :/40 'No Data Found' color 6 INTENSIFIED OFF.
endif.

Maintain Field Mapping and Conversion Rules//LSMW

Hello Friends,
I want to add new fields in the step.no.5(Maintain Field Mapping and Conversion Rules).
Indetail i'm going to upload the GL balances, for DR and CR line item fields are same so system is not accepting the same field value, so i have added 1 for the CR line item fields like in the below example.
BSEG-WRBTR(Dr line item)
BSEG-WRBTR1(Cr line item)
but BSEG-WRBTR1(Cr line item) field not displaying in the step.no.5 to mapping to source field.
please let me know the solution for this.
thanks
swapna.

Hi,
I would like to ask few questions.
1. Are you using batch input recording or using any program for uploading. (through LSMW)
2. Whether all your debit or credit line items are same every transactions. I believe they should be same, because you are uploading the balances.
You should not have two similar fields for example, if it is WMBTR, then again WMBTR should not be there, it should WMBTR1 and WMBTR2. Make sure you have done the field mapping properly. When you have done the field mapping all the fileds must have been mapped. If any one of the fields are not mapped, then it will not be uploaded.
Please see the following LSMW sample guide:
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Maintain Object Attributes Do the recording - Make sure that you do not have two fields with the similar name. If you have two fields with the same name double click on the field name and add1 or 2 to differentiate between field names. Just Copy those fields and descriptions in excel sheet, delete the blank lines, then in excel data => text to columns, your field names and descriptions will be now in two columns. Copy them, then put your cursor on the next sheet, then edit => Paste Special => Transpose, all the columns will become your rows. Now your file structure is ready. Maintain Source Structures Give some unique structure name and description Maintain Source Fields Here you add the fields that are being used in EXCEL first sheet, just copy them and make all the fields as C (Constant) and then give length of 60 for all fields. Maintain Structure Relations Though structure relations are already created just go to this step, click on edit, then click on create structure relation, just accept the message stating that the structure relation has already been created. Maintain Field Mapping and Conversion Rules Do the field mapping for all the fields, all the fields willl be stretched and you will see five rows against each row. In case if there is any row that has NOT stretched means, there is something wrong in the mapping. Maintain Fixed Values, Translations, User-Defined Routines There is nothing to be done at this step. You can simply ignore this. Specify Files Make you must have saved your excel file as .txt (before saving make sure you have copied data from sheet2 to sheet 3 and then sheet 3 is saved at tab delimited file. Text (Tab delimited) Select your file, make SURE that you have select "TABULATOR" radio button and say OK. Assign Files Go to this step and click on Create assignment button and accept the message and say ok. Read Data Remove two check boxes and just click on execute button. See the log. Make sure you have number of entries (lines) in your excel file are matching with this. Display Read Data Display data give 1 to 999 lines and double click on one of the line and see whether fields are mapped correctly are not. Convert Data Execute and see the log match the number of entries. Display Converted Data Display converted data, give 1 to 999 and double click on one of the line and see whether fields are mapped correctly or not. Create Batch Input Session Check on Keep Batch Input sessions check box, then execute. If you select that check box, even after execution it will be there and you can analyze what happened. Run Batch Input Session (Takes you to SM35) Go to SM35 select the batch and click on process button (execute), make sure you have checked right hand side first three check boxes and FOREGROUND (because you want to save what it is creating) Say OK Keep on press ENTER on your key board in order to move the session further. If you follow these steps along with the guide, surely you should be successful. There may be small difference between the file and what I have explained but ultimately the purpose is same. Hope this is useful and let me know in case if you have any issues.
Regards, Ravi

MB5S and related tables.

Hi,
I'm looking for a table related to trx MB5S.
I found EKBES but is a structure.
What is the respective table of structure EKBES ?
Yours faithfully

Hi,
There will not be any direct representation of a structure e with atable.
However, u can take some fields of this structure, go to SE84, and in ABAP dictionary from there, in the table fields, enter the fields, and execute.
System will list u out all tables , where these fields exist, with their descriptions.
By means of this description of the table one can easily choose the table
Regards
Krishna

TABLE FOR DIVISION AND ITS DESCRIPTION

Dear Mates,
My client wants to add a Division and its Description to the Z report -Daily Collection Report from Customers.
Can anybody help out for table name and its fields for Division and Description
Thanks in anticipation
Subbu

Hi,
I guess your question is about divisions within a Sales Organization. The related tables are listed below:
TSPAT - organizational unit: Sales Divisions (Text)
TVTA - Organizational Unit: Sales Area(s)
TVKOS -Organizational Unit: Divisions per Sales Organization
Hope you find the information relevant and useful. If so, please close the message.
Muraleedharan.R

Field names and table names

Hi Experts,
What r the table names and field names for
FLSA Description
Stock Option Eligible
Career Level
Full time/Part time

> Full time/Part time--> T503T-PSERK
~Suresh

QA32 Tcode i want to one more field which is material Description .in our o

In QA32 Tcode i want to one more field which is material Description .in our output . how to do it please guide .

Only exit I am aware of is IWOC0004 / EXIT_SAPLIREP1_001 to change the layout, to add customer field, i dont know any exit/badi, so i suggest you copy the report, copy the structure QALS_D02 to a Z-structure, and complete the field catalog and fill the new field in the code of the copied report.
You could append fields to the structure (QALS_D01 or D02) and use Enhancement method to adapt field catalog and filling new fields (in RQEEAL10 at END-OF-SELECTION or an adequate GET statement)
Regards,
Raymond

How to show statistics of main item and related items with less filter?

Hi experts,
Have any of you come thro' similar requirements before?
To show the statistics of a main item in different aspect in a document and show the comparison of this item in a particular aspect with other related items as inputted at prompt.
You can image that, for the comparison, if I build another query for the related items, there will be duplicated dimensions, which we aim to avoid as duplicated dimension confuse end users.
However, if i build the main items and related items in same query, for those reports of main item only, I need to add a report filter one by one!
Any one of you have better idea?
Thanks and Regards,
Cherry

You Should use Formatted Search in this case.
You must create and associate a query for your field.
click on the field you want items to be listed and press Shift + F2
catch the keydown event of this field and check pval.charpressed = 9 (tab key press)
then execute
SBO_Application.SendKeys("+")

Field mapping and value mapping - Basic

Hi,
Assuming I have a repository containing a main table with 3 fields
1)Product
2)Description
3)Manufacturer (lookup field)
When i map the source file to the destination repository
1) i map fields product and description of the source file and destination repository.
2) map the manufacturer field between the source file and destination repository.
3)Value map the contents of the manufacturer field between the source and destination.
If i have a source file like this.
Product                                         Description                                Manufacturer
a                                                         a                                              Hindustan lever
b                                                         b                                              Hindustan lever
a                                                         a                                              P&G
b                                                         b                                              P&G
Since i have made the manufacturer field a lookup field, it can hold the lookup values Hindustan lever and P&G.
what happens to prduct ? i have made only a field mapping. Will the values a & b be stored in the destination repository this way?
Is a value mapping required for product as well to hold both the values?
Please help
Thanks,
Vignesh

Hi Vignesh,
You do not have to value map it. Import managerwill automatically assign both the values to product a and b. Basically it is set in the configuration options of the import manager. There is a setting "merge source records based on matching field". If that option is set to yes, both the values will be assigned to product a and b respectively.
Best Regards,
Dheeraj

Table for TDS sections and its description

Hi,
Is there any table where both TDS section and its description is getting stored? If this is possible can we relate the same to Vendor through any link?
Thanks & Regards,
Tapan

HI
J_1ITDSSEC is the table for TDS section and description.
TDS sections will be assigned to tax codes, so you can link through tax codes whatever is assigned to a vendor.
Relation will be -- Vendor-- Taxcode--tDS section.
Cheers
Mukta

Field Symbols, Field String, and Field Group.

Hi,
Can you differentiate between filed symbols, field strings and field groups,
With regards,
Bharath Mohan B

Hi,
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
FIELD GROUPS
are used to hold/handle large amount of data when the internal table are not useful
we use EXTRACT statement, HEADER structure in them
see the example
REPORT demo_extract.
NODES: spfli, sflight.
FIELD-GROUPS: header, flight_info, flight_date.
START-OF-SELECTION.
INSERT: spfli-carrid spfli-connid sflight-fldate
            INTO header,
          spfli-cityfrom spfli-cityto
            INTO flight_info.
GET spfli.
EXTRACT flight_info.
GET sflight.
EXTRACT flight_date.
END-OF-SELECTION.
SORT STABLE.
LOOP.
    AT FIRST.
      WRITE / 'Flight list'.
      ULINE.
    ENDAT.
    AT flight_info WITH flight_date.
      WRITE: / spfli-carrid , spfli-connid, sflight-fldate,
               spfli-cityfrom, spfli-cityto.
    ENDAT.
    AT flight_date.
      WRITE: / spfli-carrid , spfli-connid, sflight-fldate.
    ENDAT.
    AT LAST.
      ULINE.
      WRITE: cnt(spfli-carrid), 'Airlines'.
      ULINE.
    ENDAT.
ENDLOOP.
FIELD STRING is nothing but a string with one row of records.
Reward points if useful
regards
Anji

Field MWSKZ and related description.

Similar Messages

Maybe you are looking for