File 2 File configuration scenario failed. Need Solutions

Thanks for Advance.
As I am new to SAP XI. Trying to exchange the data from File to File. I defined everything correct in IR and ID. but while doing testing it says that "Message is Incomplete. No Sender File" and got failed. No output file is generated. Can anyone see and let me know what is i am missing anywhere to execute the scenario.
This is the URL where u can see the snapshot of the error message.
http://picasaweb.google.com/shyamalk2000/SAPXI?feat=directlink
Please reply as soon as possible.
Thanks
Shyamal

Hi Kumar,
Then please check in FCC Parameters in ID, Also check the xml instance of your input file executing correctly or not. May be the problem with xml input structure varying to output structure.
Also refer the following links will be useful
Re: Regarding FCC
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
Venkat Rao .G

Similar Messages

  • RFC to XI to File (FTP) Scenario ? Need your help

    Hi XI Experts,
    currently I am into one the problem where I am doing one scenario which has the case of executing RFC on the SAP RFC side and based on which I will be getting the output table which will converted to XML by SAP XI and then we get that to download to FTP server as xml file only initally.
    error I am facing below:
    11/14/09 18:00     Success     The message was successfully retrieved from the call queue.
    11/14/09 18:00     Success     The message status set to DLNG.
    11/14/09 18:00     Error     Received XI System Error. ErrorCode: NO_MAPPINGPROGRAM_FOUND ErrorText:   ErrorStack: Interface mapping Object ID 18C33445E45E347387DC803834A96D42 Software Component 8E59D621C60211DEA247C2AB0A60051A does not exist in runtime cache
    11/14/09 18:00     Error     Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:.
    11/14/09 18:00     Error     Transmitting the message using connection http://tpxidq.mycompany.com:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:.
    11/14/09 18:00     Error     The message status set to FAIL.
    11/14/09 18:00     Error     Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:
    11/14/09 18:00     Error     MP: Exception caught with cause com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:
    And this is first time we are doing this type scenario if any help regarding whole scenario is also welcome.
    Thanks in advance guys, I appreciate your time and effort.
    Thanks & Regards,
    Gaurav Patwari
    Edited by: GauravPa on Nov 14, 2009 2:15 PM

    NO_MAPPINGPROGRAM_FOUND
    1) Open Interface Determination in ID and check if correct source and target interfaces are entered there.
    2) Also check the name of the Interface/ Operation Mapping whic is included in the Interface Determination
    3) Make some dummy change to this Interface Determination and again activate
    4) Check the ache Status in ID --> Environment --> cache Status Overview
    5) In SXI_CACHE check if the Interface mapping and Interface Determination are present
    6) If needed perform a cache refresh
    Regards,
    Abhishek.

  • File JDBC - scenario, no need of response

    File  to  JDBC scenario insert Async scenario....
    i dont want response back..but i am getting response and throws error ..how to make it without response?

    i was using file adapter as sync with requestresponse bean..which caused the issue..I removed it and issue resolved...

  • Dynamic Configuration-File to File in scenario

    Hi Experts,
    As per the requirement needs to supress the numeric extensions of the files and transfer to the receiver.
    Example: file name is XXX123.txt , but after picking up by sender communication channel in XI that file needs to converts XXX.txt and transfer to the receiver. Finally in the receiver end the file name should be Mahesh.txt only.
    Please share the inputs how to do dynamic configuration in XI in File to File scenario.

    Hi,
    First you need to have a UDF as shown below. No need to put any arguments in the UDF.
    public String getFileName(Container container){
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    //get file name in string s
    String s = conf.get(key);
    //remove all numeric values
    int i,l;
    l=s.length();
    String a="";
    for(i=0;i<l;++i)
    if(s.charAt(i)>='0' && s.charAt(i)<='9')
    continue;
    a=a+s.charAt(i);
    s=a;
    conf.put(key, s);
    return s;
    Now you need to map this UDF to any root element or dummy element of the target XML structure.
    Ensure that
    1. Sender Comm Channel has ASMA and file name ticked
    2. Receiver Comm Channel  has ASMA and file name and "fail if ASMA missing" ticked
    3. in receiver communication channel -> File access parameters-> File name scheme -
    > put any value say "*". This step is not compulsory.
    Hope this solves your problem.
    regards
    Anupam

  • Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi

    I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
    the error message got when it runs on another controller is "Error -32810 occurred at  The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
    I wonder by what it is caused?
    Thanks

    Hi Matthew,
    As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
    I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
    Please keep us posted on your troubleshooting steps. Have a great day!
    Amanda Howard
    Americas Services and Support Recruiting Manager
    National Instruments

  • I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution ?

    I downloaded the 32 bit version of photoshop cc 2014. When trying to install I get the message that installer failed to initialize and that this could be due to a missing file. Has anybody a solution>?

    Did you unzip the entire contents of the download zip file onto your hard drive before running the installer?  You need to do that.
    I have installed it myself and it went in just fine.
    -Noel

  • BizTalk Runtime configuration error - "Creation of Adapter FILE Configuration Store entries failed"

    Hi,
    I am trying to install Biztalk Server 2006 R2 on a Vista Ultimate
    edition machine. I completed the installation successfully, and have
    configured "Enterprise SSO" and "Group" features. I am getting the
    following error while configuring the BizTalk Runtime feature.
    "Creation of Adapter FILE Configuration Store entries failed.
    The SSO system is currently disabled."
    I have already done/tried the following:
    1. I tried different settings - Inprocess only, Inprocess and
    isolated, each trusted, each with a regular user account and each with
    an administrator user account. In all cases I get the same error.
    2. I have made the changes suggested here (related to rpc
    authentication changes after Windows XP SP2) but it still doesnt
    change anything: http://blogs.msdn.com/scottwoo/archive/2004/05/19/135453.aspx
    Any suggestions?
    Thanks in advance,
    Anand

    I'm having a similar installation error on an XP SP2 box and was getting the same error message (Creation of Adapter FILE Configuration Store entries failed. The SSO system is currently disabled.).  I checked and the Enterprise SSO application is not appearing in the list of services, and doing a command line "net start ENTSSO" returns an invalid service error.
    So going on the theory that SSO did not install correctly and get registered as a server, I went ahead and uninstalled BizTalk/SSO, blew away BTS/SSO databases, and tried to reinstall (selected all options for install).
    After BizTalk installed, I entered a local admin account and chose "Custom" installation.  Because the error message pointed at an SSO problem, I tried to apply the SSO configuration ONLY, using the default SSO Administrator/Affiliate Administrator accounts with the default admin account, but it keeps failiing at the same point in the install log when it tries to start SSO (see log below).
    [10:30:51 AM Info ConfigHelper]  Creating service: ENTSSO, start type: 2, exe: "C:\Program Files\Common Files\Enterprise Single Sign-On\ENTSSO.exe", dependencies: RPCSS,COMSysApp,MSSQLSERVER, account: .\bizservice
    [10:30:51 AM Info ConfigHelper] bizservice is a local entity.
    [10:30:52 AM Info ConfigHelper]  Created service: ENTSSO
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7370) CSSOServerCfg::ConfigureSCP
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7445) NetScheduleJobAdd: nRc = 00000000, dwJobId = 1
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5697) CSSOServerCfg:tartService
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5721) The SSO service is starting.
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5852) ENTER: CSSOServerCfg::WaitServiceState
    [10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is starting (SERVICE_START_PENDING)
    [10:30:53 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is not running (SERVICE_STOPPED)
    The SSO database does get created, but the SSO Administrators and SSO Affiliate Administrators local groups do not.
    So my theory here is that for some reason SSO cannot start, the exception is caught and the app rolls back.
    Any ideas?

  • XI error: adapter.file.configuration.DynamicConfigurationException

    Hi all,
    I have an scenary of file process between an NFS and an a FTP server.
    I need these files will conserve these original names, so it's configured with "Adapter-Specific Message Attributes" Options ticked:
    X-> Use Adapter Specific Message Attributes
    X-> Fail if Adapter Specific message attributes missing
    X-> File Name
    <b>The error at communication channel monitoring it's:
         Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: The Adapter Message Property 'FileName' was configured as mandatory element, but there is no 'DynamicConfiguration' element in the XI Message header</b>
    Any ideas?
    I had another interface, with similar CC (the fail one it's a copy of this that goes OK) and it's working fine.
    Thanks in advance for your help

    Hi,
    i am working on MQ-XI-file Scenario.
    i use jms send adapter and receive the file with file reveive adapter.
    in the receive file adapter i set Adapter-Specific message attributes.
    but i get the error in the communication channel monitoring:
    The Adapter Message Property 'FileName' was configured as mandatory element, but was not supplied in the XI Message Header.
    Any one know what shoud i do with the jms send adapter?

  • HTTP-FILE synchronous scenario

    Hi,
    I want to configure a Http to file synchronous scenario.
    Message will be sent through the HTTP test tool. I have selected BestEffort as the QoS.
    We do not want to use the repository objects.
    Sample file say(<tag>this is a sample file</tag>) will be sent through HTTP test tool.
    This file should be received by the File Receiver channel and dumped on the FTP.
    In response, a file from some other folder on FTP should be sent.
    How can this be achieved?
    Regards,
    Pratibha.

    Hi Pratibha,
    the standard sap help side is here very good
    [Integration Processes (ccBPM)|http://help.sap.com/saphelp_nw2004s/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm]
    You need a receive step (synchronous) for for your http request.  For this you need 3 abstract interfaces: 1 synchr IF, 1 async for request container, 1 async for resp container. You need to correlate with a unique number which the http sender has to send (f.e. date/time stamp)
    Next may be a transformation (mapping) but not required.
    Then a async send step to send the file.
    The response file need to be created, the corresponding adapter should have a short poll intervall. The response file need to send the unique id as well.
    The BP correlates the second receive step, next you can - like before optional - execute a transformation step.
    Finally u close the sync/async bridge and send the response back. This will take assumedly a minute or more.
    The whole design is may be not sufficient. Better ask if the requierments are changeable.
    Regards,
    Udo

  • ALE Settings For File-IDOC  Scenario

    Hi All,
    While Doing IDOC-File Scenario we have to do the Following Settings
    In XI
    1) Create RFC Destination towards R/3
    2) Create Port
    3) Load Meta data
    In R/3
    1) Create RFC Destination towards XI
    2) Create Port
    3) Create PF
    Q1) Coming to File-IDOC Scenario do we need to do the Same Settings ????
    Q2) In this File-IDCO Scenario do we need to create RFC Destination in R/3 towards XI ????
    Clarify me these Confusions
    Regards
    Bopanna

    HI,
    for IDOC TO FILE
    We need to create the rfc destination at XI side so as to send the acknowledgement to sap r/3 as soon as idoc has been received.This is the reason WHY WE NEED RFC DESTINATION AT XI SIDE
    There are are only 2 major difference in Ale settings for FILE TO IDOC AND IDOC-FILE
    i.e for FILE-IDOC
    1) No need to Distribute the modal view
    2) For partner profile Specify the INBOUND PARAMETERS
    FOR STEP BY STEP U CAN SEE THE SETTINGS GIVEN BELOW
    We need to do the following settings in XI
    1)   Create an RFC Destination to the Receiving System in transaction code (SM59)
    a)   Choose create
    b)   Specify the name of the RFC destination
    c)   Select connection type as 3 and save
    d)   In the technical settings tab enter the details SAP SID/URL and system number#
    e)   Enter the Gateway host as same details above SID/URL
    f)   Gateway service is 3300+system number#
    g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
    h) Test the connection and remote logon.Both should be succesful
    2) Create Port Using Transaction Code  IDX1
    a)   Select Create New button
    b)   Enter the port name as SAP+SID (The starting char should be SAP)
    c)   Enter the destination client
    d)   Enter the RFC Destination created in XI towards R/3
    e)   Save
    3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
    a)  Create new
    b)  IDOC Message Type
    c)  Enter port created in IDX1
                        SETTINGS IN SAP R/3
         We need to do the following settings in R/3
         Logon to Sap R/3 System
    1)   Create an RFC Destination to XI in transaction code  (SM59)
    a)   Choose create
    b)   Specify the name of the RFC destination
    c)   Select connection type as 3 and save
    d)   In the technical settings tab enter the details SAP SID/URL and system number#
    e)   Enter the Gateway host as same details above SID/URL
    f)   Gateway service is 3300+system number#
    g)   In the Logon /Security tab, enter the client, user & Password details of Destination system
    h)   Test the connection and remote logon.Both must be succesful
    2)   Create communication Port for Idoc processing Using Transaction(We21)
    a)   First Select Transactional RFC and then click create button
    b)   Enter the destination port name as SAP+SID (The starting char should be SAP)
    d)   Enter the RFC Destination created in SAP R/3 towards other system.
    e)   Save
    3)   Create Partner Profile with Inbound Parameters (WE20)
    a)   Create New
    b)   Create the Partner no. name as same the logical system name of the destination system
    c)   Select Partner type LS
    d)   Enter details for Type: US/USER, Agent, and Lang
         Then Save
    e)   Select Partner no. and LS which were create above
    f)   Now we have to give some Inbound Parameters.So click on ADD TO Create Inbound Parameter
    g)   Select Message type
    h)   Double click on Message Type and Then Enter the details  for Message Type and Process Code.
    I)   save
    4)   In Transaction SALE, Create Logical System
    a).  Go to Basic Settings-> First Define logical systems
         and then assign logical systems
    b)   Double click on Define the logical systems
    c)   Give data for your Logicaal System and Name
    d)   Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
    e)   Assign the logical system name to the client
    ALSO WE NEED TO CONFIGURE THE IDOC ADAPTER AS RECEIVER TO CONVERT THE IDOC-XML TO IDOC
    PLZ REFER THE LINK BELOW.
    PLZ REWARDS THE POINTS
    VIKAS JAIN
                                                                                    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098]
    Edited by: vikas jain on Jan 22, 2008 11:49 AM

  • Business Systems for File to File Configuration

    Good day.
    We need to created two (2) Business Systems for our File to File Configuration.
    Configuration Details:
    SWCV must be attached to a Product.
    Technical Systems must be Third Party.
    Business Systems must be identified as an Application System.
    Problem is that i don't know where to start. Can you help me.
    Thanks.

    Hi Abe
    Pls. follow below steps -->
    In SLD
    1. Create the Product & Software Component for File Systems.
    2. Create the Technical systems as Third Party & select the Installed Products for File systems accordingly.
    3. Create the Business Systems & select the corresponding technical system.
    In IR
    1. Import the SWCV from SLD using Tools --> Transfer from SLD option
    2. Create the Data Type & Message Type for source & destination .
    3. Create the Inbound & Outbound message interfaces
    4. Create the Message Mapping & interface Mapping.
    In ID
    1. Create the scenario
    2. Using context menu of Business System. Assign Business system for Source & target systems
    3. Create the Sender & receiver file adapter.
    4. Create the receiever determination, interface determination
    5. Create the Sender & receiver agreement.
    - Lalit -

  • Syncronous RFC to File Server Scenario

    Hello,
    I have this requirement for the XI Scrnario.
    SAP 4,6 (RFC) needs to pick up XML file placed on Remote File Server.
    RFC need to be executed on SAP which should make a call to XI and in turn File server, pickup the XML file from the server, bring it back to XI , do mapping and send the structure back to RFC.
    This is Syncronous scenario.
    Can naybody tell me how to do it.
    i have searched it, but got more confused.
    Appriciate your help.
    Thanks.
    DK

    there exist a way around for this,but there are few(may be lot) constraints on it.
    first of all you should know all the directories before hand from which you can get files,secondly you should know about the filenames too
    what you can do is give all the directory names in the sender file adapter,similarly give the corresponding fileanames as well,XI will pick all the files in all the directories which satisfy the criteria one thing you need to make sure here is that if you don't want a certain file to be picked by XI,then it must either not exist in the directory or it must have a different names.
    even though this is not completely dynamic but it solves the prupose if all the constraints are fulfilled and sender file adapter has been configured properly
    Thanx
    Aamir

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • File-to-File/RFC scenario with reading filename

    Hi,
    i have a File-to-File/RFC scenario which causes some problems in desining it correctly. Maybe some of you has an idea how to do this.
    Scenario:
    - A file is picked up by a File-Adapter. The files are different: pdf, doc, tiff, jpg, txt, ...
    - The file must now go through a business process (not necessary the file, but i need the filename in the business process).
    - The process has to contact several backend systems (SAP R/3) to collect some data. To achieve this the filename has to be send to this systems.
    - The collected data are send via SOAP to a receiver system
    - The file itself has to be stored in a directory via File-Adapter.
    Here's my problem:
    - Is it possible to transport the binary file content within a message which contains other elements (e.g. filename)?
    - Is it possible to do graphical mappings with such a payload (only 1 to 1)? Or must i use Java Mappings only?
    - How to generate a Message from the sender File Adapter which contains binary file content AND filename? Is this possible with a Module?
    - Is it better to create 2 messages with an adapter module? One with the image the other with the filename. Or is it better to split them later in a Mapping?
    Thanks in advance,
    ms

    If all that you need is the file name, use adapter specific settings in the sender file adapter. Then you can access the file name in mapping runtime in UDFs. If you want to have content of the pdf, jpg etc images, i do not think there are ready modules available except for reading pdfs ( you might have to research on this).
    For look ups etc with R3 systems, you can use the file name that you got from the adapter and store it in mapping fields.
    VJ

  • XI is not able to archive file in file-idoc scenario

    Hello friends,
    I have an issue in my file->idoc scenario. When a file is placed to XI's filesystem using FTP, it is placed under xiftpuser user. Owner of all directories in this structure wher the file is placed is xiftpuser. XI is not able to archive the file because of the permissions on the archive directory. But the problem is, permissions on this directory are 775 and xiftpuser and xipadm user are in the same group. So this should work. But it doesn't. When I change permissions to 777 everything works fine.
    Do you have any idea what could be wrong?
    Does it matter, that xipadm user has been added to the common group with xiftpuser "later", when XI was up a long time before? Do we need to restart j2ee to take these new permissions into account?
    Thank you,
    Olian
    Edited by: Olian Saludew on Sep 23, 2008 11:46 AM

    Hi,
    If archive directory Path is d:\archive
    Put a '\' after it.
    e.g. "D:\archive\"
    It will work.
    Regards,
    Akshay.

Maybe you are looking for