File adapter not writing the file correctly

Hi,
I am facing an issue where the file created on the destination is not with the correct data. eventhough the payload that was sent out from XI to the adapter is correct.
Issue was with a mltiple element which was written once eventhough the payload shows multiple existance.
we had changed the occurance of that element from 1 to unbounded.
If anyone has any idea do let me know
Regards
Nikhil

I tried to redo the config objects but still the same issue is there. anyone has any idea

Similar Messages

Sender file adapter not polling the file

hi all,
i have configured a filexifile scenario....
but the file sender adapter is not polling the file at all....
i dont c any message either in RWB or in SXMB_MONI
i checked the adapter framework url at http://<ximachine>;<port>/AdapterFramework....and the status for the file adapter is green...
but the message it gives there is
Sender Adapter v1014 for Party '', Service 'TASL_FILE_SENDER':
Configured at 03:07:24 2006-02-02
Up and running - no message processing until now
last poll interval started 04:01:24 2006-02-02
length 60,000 secs
y is the sender adapter not polling the file..
i am using NFS as my File System....i gave the source directory as d:/test_dir/
is this way of specifying the source directory on a windows machine correct...
thanks
pavan

There is probably something wrong with the File Adapter. You will need to go to the RunTime Workbench >> Component Monitoring >> Display >> Click on the Adapter Engine >> More information will display and click on the button 'Adapter Monitoring' >> A new window will display and click on the arrow next to your adapter engine. This displays a list of adapters running on your system. Green light means good; Red, you have a configuration problem. Look at the error and try and resolve it.

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

File Adapter Not picking the files

Hi All,
We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
Any idea why the files that are dazzled with the same name are not being picked up.
Thanks in Advance...!!

Hi,
While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
"Includes files with name pattern" "Excludes file with name pattern" file name..
let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
cross check the schema element of the file pattern.

FTP Adapter not writing the file in FTP directory

We have desiged BPEL Process which will get data from Oracle and write in txt file in FTP directory.
For last few days, we are getting following error when we invoke the BPEL Process:
file:/u102/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_XXADS_INT033_DEL_EBS_OUT_1.0_0be42a99260084d9bd5104929a8ac1b2.tmp/DELFTPservice.
wsdl [ Put_ptt::Put(opaque) ] - WSIF JCA Execute of operation 'Put' failed due
to: Error saving control file.
Error saving control file: "/u102/product/10.1.3.1/OracleAS_1/j2ee/home/fileftp/controlFiles/ZmbNdvlpVkaee+
OddQzH2Q==/outbound/controlFile_ob.properties"
; nested exception is:
ORABPEL-11080
Error saving control file.
Error saving control file: "/u102/product/10.1.3.1/OracleAS_1/j2ee/home/fileftp/controlFiles/ZmbNdvlpVkaee+
OddQzH2Q==/outbound/controlFile_ob.properties"
Please make sure that a valid control file exists.
Can anyone help me to resolve this?
Thanks,
Hariharan Ramakrishnan

I tried to redo the config objects but still the same issue is there. anyone has any idea

File Adapter not picking the file

Hi Experts,
I am trying to create a Legacy-XI-R/3 scenario. I am using a file adapter as the sender communication channel and a ABAP proxy at the receiver end. I have given the path of my input file in the legacy system, but the file is not picked up by the adapter. Can any one tell me where I might have gone wrong?

Hi,
Just want to add one more suggestion.
Check the Host name, where the File is kept and try to use the directory path as
<HostName>\<DirName>.
Hope this help.
Aj.

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

Setting the UNIX file permissions after writing the file to a directory

Hi Experts,
Can we set the UNIX file permissions after writing the file to a directory using Receiver File Adpater in SAP PI 7.1 ?
Thanks in Advance.
Regards,
Jyoti

Hi
you can use the option "Run Operatiing system Command after File Processing" in the file adapter.
Thanks
Rinku Gangwani

Sender File adapter not deleting the source file after reading

Hi everyone,
In the sender Communication channel i have choosen the "Delete" option after reading the source file. But it is reading the file, but it is not deleting the file. I have checked the file status. it is with full persmission.
can anyone give solution to this.
Thanx
Bala

Hi,
1. set the mode to delete
2. make sure the file is "deletable"
3. check xiserver:port/MessagingSystem/monitor log to see what happens with the file
(chec both audit and log in that link)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

File adapter reading while the file is still being written....

Hello BPEL Gurus,
I had a quick question around BPEL or ESB file adapter. Does BPEL file adapter starts reading a huge file that is being written or it waits until the writing process is completed and file is complete?
Any response is highly is appreciated.
Thanks.
SM

It goes like this. At every polling frequency, the adapter looks into the directory for the files with specified pattern (e.g. *.csv, MYCOMPANY*.txt) and specified condition, e.g. minimum file age. This means if there will be 2 files available with matching criteria, the both will be picked up and processed simultaneously in two different BPEL instances. No specific order of execution. However you will find the instances in BPEL console with little delay based on file size.
Perhaps you can elaborate your scenario further. Do we have knowledge of the file name that are to be picked up from the folder. You may use synchronous read option. If you are using 10.1.3.4 version then you can specify the file name before file adapter makes a synchronous read into the give directory.

OSB file Write, not naming the file with specific name.

Hi ALL,
I have a requirement, i should accept the data or XML file from from JMs queue and place it in a location specified. For this i have build the PS and BS.
Where PS will De-queue the JMS queue and route using Service call out to BS. And the BS will place the file in location. I could do this easily. BUT the thing is that i could not name the file perfectly with the intended file name. to build the BS i used .JCA file , .WSDL file, XML file from Jdeveloper. and imported to osb console. i could write the file as follows..
MY business Services:
services TYPE : ANY XML services
transport
Protocol ==> file
Load Balancing Algorithm ==> round-robin
Endpoint URI ==> file:///oracle/Middleware/user_projects/domains/Agile
Request encoding ==> utf-8
this is the file name i am getting:
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
 <tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
 <tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
 <file:filePath xmlns:file="http://www.bea.com/wli/sb/transports/file">
 /oracle/Middleware/user_projects/domains/Agile/POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml
 </file:filePath>
</con:metadata>
the file NAME : POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml ( POTest is prefix and .xml is Sufix)
3338620552690675292--411054fa.1363686ca89.3e8d i dont know y the this garbage file name is created...
please give suggestions to avoid garbage name
thanks --
ANIL

Hi ALL,
I have a requirement, i should accept the data or XML file from from JMs queue and place it in a location specified. For this i have build the PS and BS.
Where PS will De-queue the JMS queue and route using Service call out to BS. And the BS will place the file in location. I could do this easily. BUT the thing is that i could not name the file perfectly with the intended file name. to build the BS i used .JCA file , .WSDL file, XML file from Jdeveloper. and imported to osb console. i could write the file as follows..
MY proxy services:
services type : any XML services
protocol :jms
MY business Services:
services TYPE : ANY XML services
transport
Protocol ==> file
Load Balancing Algorithm ==> round-robin
Endpoint URI ==> file:///oracle/Middleware/user_projects/domains/Agile
Request encoding ==> utf-8
this is the file name i am getting:
<con:metadata xmlns:con="http://www.bea.com/wli/sb/test/config">
<tran:response-code xmlns:tran="http://www.bea.com/wli/sb/transports">0</tran:response-code>
<tran:encoding xmlns:tran="http://www.bea.com/wli/sb/transports">utf-8</tran:encoding>
<file:filePath xmlns:file="http://www.bea.com/wli/sb/transports/file">
/oracle/Middleware/user_projects/domains/Agile/POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml
</file:filePath>
</con:metadata>
the file NAME : POTest3338620552690675292--411054fa.1363686ca89.3e8d.xml ( POTest is prefix and .xml is Sufix)
3338620552690675292--411054fa.1363686ca89.3e8d i dont know y the this garbage file name is created...
i am getting this error when i process test from proxy services then i may use route and change it as Use Routing Options on the Service Callout and override the header (jca.file.FileName).
but the thing is when i test from Business services also i am getting the same garbage name on both window and linux.
please give suggestions to avoid garbage name
thanks --
ANIL

File Receiver Adapter is not writing the file?

Hi All,
I am having a file to file scenario using NFS as both the source and destination are on server.
File is getting picked up from server but not reaching the destination.
In RWB for Receiver channel it only shows Channel active and started correctly.
In SXMB_MONI it shows the message scheduled for some later time.
On reaching that time it tries again and reschedules :(.
Please guide.
Regards,
Sumit

Sumit,
Now do one thing, just for check the directory for read/write permission by putting the test file manually on your target directory.
The porcedure to put a file on server is as shown below:
1. Save your file in your local machine.
2. In XI server, enter the tranaction code "SXDA_TOOLS".
3. In the input screen, enter:
i) Object Type "DXPROJECT".
ii) Program Type "BAPI".
iii) Program "CREATE".
4. Press Copy (Ctrl+F5) button.
5. Now, you will get another screen in which you will see 3 blocks called as "Source", "Target" and "Copy with/without conversion".
6. In Source block, choose the radio button "Presentation Server" and then take F4 help to select your source file. (file which you have saved on your local machine)
7. In source block select the radio button "Application Server", check the box "Remote server" and take F4 help to select your application server.
8. In the same block under "File Type" select "P physical file name" and under "File Name" write the path/directory name which you have mentioned in your communication channel along with the file name.
Example: suppose file name in your Comm Chanel is "demo.xml" and directory path is "/abc/testfiles/XML/", then in step 8 write "/abc/testfiles/XML/demo.xml".
Note: need not to do any thing in 3rd block.
After doing all the above, let me know the results.
Regards,
Sarvesh
****Reward points, if it helpd you.

File Adapter not writing file when processed from one node in a clustered environment

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

In our environment, we have 4 server nodes running. We are using a file adapter to write file to a location in the server. the adapter is writing files when its processing data in all nodes except one.
Below is the JCA File
<connection-factory location="eis/FileAdapter" adapterRef=""/>
<endpoint-interaction portType="Write_ptt" operation="Write">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
<property name="PhysicalDirectory" value="/data/prd"/>
<property name="FileNamingConvention" value="Sample.dat"/>
<property name="Append" value="true"/>
</interaction-spec>
</endpoint-interaction>
the File Adapter health is running OK. What would be the potential cause

JMS adapter not picking the file

Hello,
I am working jms to jms scenario on PI7.0 Service Pack13. file is not able to pick up sendar JMS Channel. I am using WebSphereMQ Transport Protocol. JMS drivers are installed.
I checked all parameters of JMS Adapter. no mistake in parameters. What is the problem. Please suggest as soon as possible.
Thanks

Hi,
Whether the Driver file has been mentioned in Provider XML file and check the messages are in the right sender Queue.
Check the Port and Protocol are right one.
Regards
Agasthuri Doss

Sender File Adapter Not Picking Any File

Dear Expert,
I am newbie in PI. Just tried to create File Content Conversion Scenario. Details as follow :
1. Source Directory ..\file\log\test_q.txt
2. Target Directory ..\file\log\xml\test_q.xml
Transport Protocol : NFS
Message Protocol : File Content Conversion
Adapter Engine : Integration Engine
I have completed all the design and configuration in IR and ID. However, when I produce the log file in the directory, nothing happen.
Hacing checked in the RWB as well, I could not find any clue. simply nothing happen.
Would you please advise me on how to trigger the interface? As per my understanding, sender file adapter will be activated directly once the file is created.
Thank you very much in advance.
Best Regards,
Y

Hi Yonisiwa,
Things you should check here are:
1) If the sender file adapter is active or not.
2) If the source directory is correctly spelt or not. (Check if you are using the correct slash \ or /)
3) The file name/mask is correct or not.
4) The polling interval is too long.
Alternatively, you can check the message monitoring in RWB at the adapter level and go into the audit log if the message.
There you can see the reason for the file not being picked up.
Also check the Communication Channel status in the Component Monitoring link in RWB.
Regards,
Ravi Kanth Talagana

File adapter not writing the file correctly

Similar Messages

Maybe you are looking for