File adapter polls before the processing is finished in R3

Hi,
Polling in sender file adapter is set as 4 secs. The problem arises when more than one files with same Service Order number are uploaded and the corresponding IDOCs are simultaneously received in R3 system. As one IDOC is already processing the Service Order, the other IDOC fails as the Service Order is already being processed.
Kindly suggest if there is a way to resolve this issue.
Regards
Pravesh

Hi,
Check below link:
File adapter should pick a single file at a time
can file adapter pick files sequentially
Amol
Edited by: AMOL BHARTI on Apr 14, 2010 11:38 AM

Similar Messages

File Adapter polls all the files from the directory when deployed again

Hi,
File Adapter polls all the files from the inbound directory irrespective of the timestamp when deployed again.
For ex. when the BPEL process with file adapter is deployed, it starts polling the directory based on the timestamp as and when the directory is written with the files. I did not opt for deleting the files after read by the File Adapter.
But, when BPEL process is modified and deployed again, this time, the file adapter picks up all the files in the inbound directory and doesn't consider the timestamp.
My guess is that it should not pick all the files but based on timestamp only.
I guess I can observe the same behavior if I bounce the Application Server also
Do I have an option to achieve this?
Thanks,
Sasi Bhushan.

try this:
1- create a File object for the directory. (look at isDirectory() )
2- create a File[] that represents the files in that directory. (.listFiles())
3- if (file[x].isDirectory()) {recursive method call;}
4- else {
process file;
If you want more help--do some work on it, and come back with specific questions relating to specific lines in your code and specific error messages you've been receiving.

The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message

Hello,
Please help me figure this out. I'm very unhappy at the moment. I'm fustrated and don't have any idea how to revert to the original version before the update was done on iMovie 10. I NEVER hated APPLE until NOW!! I love APPLE products and apps so please help me stay in that mindset. So I worked on some movie projects when I got my macbook pro 6 months ago. I update reguarly. I saw the update prompt and honestly, I did not think I would have ANY issuess with opening my previous files that I created only a few months ago with this updated version.The new updated version of iMovie 10 won't let me open my previous files I created before the update today. I have a wedding that I'm trying to finish and deliver and now I can't because that file version won't open. I keep getting an error message and the iMovie app closes. Last night I saw the file and tried to open it but no luck. Error message came up again. I reboot and turned off my laptop for the evening and tried again just now but nothing!! I need that video. My job depends on it! I worked so hard on this wedding video and now it's lost and won't open. I work another job and don't have much time. I really don't want to start all over again. Please help me. Thanks so much for your assistance.
Fustrated APPLE customer
Jolly A. Rupp

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

XI file adapter polling faster than poll interval

Hi,
We are facing a issue with the file adapter/authorization of the FTPUSER.
We FTP a server and pick up a file from a particular folder.
My polling interval is 2 minutes
My retry interval is space.
Processing mode : ARCHIVE
We are archiving it on a Network attached server(NAS) mounted on our XI server.
When XI polls for the first time it picks up the file but the sender file adapter shows following error in RWB.
<b>2006-01-20 11:31:08 GMT: Error: Deleting of file 'ARUCSjnewb80.txt' failed - cannot proceed: FTPEx: ARUCSjnewb80.txt: Access is denied.</b>
The picked up file gets processed but at the same time just within 12-13 seconds of the first poll XI picks up the file second time and then in another 3 seconds for the third time.
After this the file gets archived thrice in the archive directory and then gets deleted from the source directory.
We are unable to understand why XI is polling again after few seconds of the first poll.(As per my understanding it should have polled after 2 minutes).
I am able to delete the file manually from the Ftp server.
Could anyone give a pointer towards what we are missing or what probable reasons could be?
authorization issue?( XIADM /ftpuser have full authorization)
Some adapter setting?
Regards,
Sulakshana

Hi,
Could you let me know how frequent the file gets loaded to the FTP server.
Is your file size too large to get loaded.. If so try to increase the polling interval. Also make sure that you have provided the polling time in sec and not in minutes...i.e for 2 minutes it should have been specified as 120 sec as polling interval
Regards,
Nithiyanandam

File adapter instances for BPM processing

I have two doubts. If I have a single file adpater polling an Input folder and the reciever is the BPM,and i have multiple files in the same folder to be picked up by the File adapter. Will the files be qued up to be picked by the file adpter, or will there be a multiple instances of the file adapter internally ?
The second issue is that, if i have multiple instances of BPM using the same outbound file adpater, then will the outbound messages be qued up or sent parallely
Please share any ideas on this.
Regards

Hi,
1) Files with the same name cannot be in 1 folder. so if you need to pick up (say 3 files) u need to create 3 File sender channels and associated these channels to the corresponding sender agreements. So when ever an adapter find sthe file it will pick it up. So there will be queuing up at Adapter level.
2)In the secod case, all instances of BPm will send to the same file adapter, and the files will get overwritten unless you specify somethign like "append messad" or "add time stamp"
3)Each instance of your BPM is an indivual process. It doesn't care if the instace1 RFC has been suceessfully processed or not. So when file2 is sent, BPMInstance2 is created and RFCadapterInstance2 gets started processing....
Hope this helps you.
Cheers,
Siva Maranani.

DB adapter polls all the records regardless of the MaxTransactionSize

Hi All,
I have a requirement that I need to poll only 10 records per minutes from DB2 database, regardless of how many ever records in the database at the time of the polling. I used the DB polling with custom sql, to fetch only first 10 records, as well as MaxTransactionSize set to 10 and PollingInterval to 60 (sec), PollingStrategy as LogicalDeletePollingStrategy. But when I test it out, if I have 100 records in the database, it updated all 100 records with the MarkReadValue and gave me all 100 records. I tried with disabling the SkipLocking as well, but doesn't seem to work. I also tried using the throttling in DB adapter in the composite.xml, but though the composites are showing up one by one based on the throttling time interval, in the database, it updated all the records right away, which is unacceptable as per business logic. Can someone please guide me how I can implement this? Thanks in advance.
Note: I am using SOA 11.1.1.5. In 10.1.3.4, we have implemented this and it is working well, but can't make it to work in 11.1.1.5.
Hruthayah

Thanks for responding, Narsing.
Please Note that MaxRaiseSize property doesn't behave the same in Database Adapter as it does in File Adapter Polling...
MaxTransactionSize = Database Rows Per Transaction
MaxRaiseSize = Database Rows Per XML Document
In Database Adapter, MaxRaiseSize means the maximum number of records it can get in an XML Document...Yes, I do understand that, and that is why since I want one record per each instance, I have MaxRaiseSize set to 1.
in the steps of configuring DB Adapter, you can select the 'Do Synchronous Post to BPEL' option in the 'Operation Type' screen in the adapter configuration wizard. This will generate an empty response message type for output variable. In the BPEL process add the reply activity at the end of the process by selecting output variable and also add the reply activities in the end of catch and catch all blocks in the exception handling.I had done what you have suggested. But I have seen two issue.
1. Although only one instance is being showing up for the first time in EM, in database, all the records are being marked as "Reserved". (which is unacceptable as per the business requirement)
2. Next instances are showing up right after first one is done. (meaning, all the instances are showing up one by one without waiting for the polling interval)
Is this because of the DB2 database? I even tried updating the "PoolingService-or-mappings.xml" file to include the custom sql so that it will exactly fetch first 10 records.
<query name="EOneEvents" xsi:type="read-all-query">
<timeout>0</timeout>
+<call xsi:type="sql-call">+
+<sql>SELECT E1GS2A, E1VALU, E1UKID, E1ACTN, E1AA20, E1GPSP, E1LL, E1GS1A, E1GS1B, E1HBST1, E1HBST2, E1HBST3, E1HBST4, E1HBST5, E1CRTU, E1CRTJ, E1CRTT, E1WRKSTNID, E1HBOPID, E1UPMB, E1UPMJ, E1UPMT, E1JOBN, E1PID FROM F57MTE01 WHERE ((E1GS2A = 'LOT') AND (E1GPSP = '0')) ORDER BY E1CRTJ, E1CRTT ASC fetch first 3 rows only</sql>+
+</call>+
<reference-class>PollingService.F57mte01</reference-class>
<cache-usage>primary-key</cache-usage>
<lock-mode>none</lock-mode>
<container xsi:type="list-container-policy">
<collection-type>java.util.Vector</collection-type>
</container>
</query>
</queries>
I would appreciate if you can guide me if I am doing something wrong here.
Hruthayah

Faults generated by Oracle file adapter not reaching BPEL process

Hi,
I have a process that uses the Oracle file adapter to receive the contents of a file, and am suffering from a number of problems when it is not able to parse the source file.
The process is initiated by a receive activity associated with the file adapter partnerline that has the create instance flag ticked.
One problem is that if the file adapter encounters an error when reading the file, there is no record of anything happening from the BPEL Console. I presume this is because no instance of the process has been created as the error was encountered before invoking the process. The only record I have of a problem ever occuring is in the logfiles.
To make matters worse, if you select the Delete files after successful retrieval, the source file is deleted even though an exception has been encountered. If you specify the Archive processed files options, it does not archive the file.
So to summarise the problems:
* there is no record of an attempt to read, or of a faulty read occurring when trying to read the file from the BPEL console when a faulty read does occurs.
* no instance of the process is ever created, so it is not possible to implement a fault handler to send out a notification of the problem.
* when a problem is encountered, the source file is deleted and not archived.
I assume that this is a bug, so can anyone advise if there is a patch to address these problems?
Thanks
Toby

Ok, so now I'm using a rejection handler to invoke a BPEL process, and have defined the inputVariable type to be rej:RejectionMessage and imported RejectionMessage.wsdl.
The process is being invoked successfully, and I can see that the processes input contains data.
So I am writing the opaque MessagePayload to a file successfully using a file adapter, and can see the file content that is written is as I would expect (it matches the file used as input that would have caused the fault - although the content is truncated).
Now I want to modify the file adapter so that the file's filename is set to the RejectionId attribute of the BPEL process. However, I'm receiving the following message:
xpath variable/expression expression "/ns2:RejectedMessage/@ns2:RejectionId" is empty at line 50, when attempting reading/copying it.
Please make sure the variable/expression result "/ns2:RejectedMessage/@ns2:RejectionId" is not empty.
I can see from the console that the RejectionId is in fact populated, and the copy from the RejectionMessage's MessagePayload is completed ok.
Does anyone know what's going on here?
Thanks
Toby

File Adapter Not picking the files

Hi All,
We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
Any idea why the files that are dazzled with the same name are not being picked up.
Thanks in Advance...!!

Hi,
While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
"Includes files with name pattern" "Excludes file with name pattern" file name..
let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
cross check the schema element of the file pattern.

Need file adapter polling with read operation to be triggered by a BPEL without using synchronous read

The scenario is:-
Web Service Client -->input-->BPEL-->if input valid-->trigger file adapter with read operation--> receive file
i am not able to stop the polling until it is required to trigger the polling.
As soon as i deploy the composite the file adapter starts polling without waiting for input.
Since i am using two receive activities, the second one which is suppose to receive file from file adapter is always showing pending state. (asynchronous callback)

Hi there,
IMHO the traditional read is used only as inbound operation, that means
that it starts polling the input folder as soon as the composite gets
deployed - which is the same you are experiencing.
In your case you need an outbound operation that needs to be invoked at
a certain moment. I don't know what are the reasons not to use sync
read, but this is the only outbound read operation supported by the
adapter. If you can not use the sync read, then you would have to design
some custom solution where you call a web service or EJB for instance
that reads the desired files.
Another option I can think of, though have not use personally is using
the adapters programatically in Java - take a look at this blog post as
it seems related to this topic -
https://technology.amis.nl/2012/01/22/using-the-oracle-weblogic-technology-adapters-with-custom-java-message-driven-bean-mdb-triggered-by-file-adapter-part-of-the-story/.
Hope this helps,
A.

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

Sender File adapter not picking the file ABCD.PRN extension file

Hi
Am doing File to Abap Proxy scenario. My source will be in text format of fixed length of fileds 7.
My souce file will be generated by a third party machine with the extension EEE150809.PRN. In my scenario my file adapter should pick the file and update the same in ECC via a Proxy.
I have configured the Sender File adapter with Message Protocol - Content Conversion but file adapter is not picking the file. I have checked the Communication channel and status is fine. But the same Communication Channel works for .XML file.
What are the parameters that I have to consider with the file extension .PRN using File adapter?
Thanks.
S.

Hi Swarna,
You dont need to worry about the extension when picking the file. You can try using EEE* so that is picks all the files starting with EEE. If you have the fixed name then you can try giving EEE150809.*. Also EEE150809.PRN should not have any issue. Try to see in sender commu ication cahnnel for anyerrors. Probably there might be some network issues or authorisation issues. If you are reading with NFS then ask them to give necessary permissions. If you are reading through FTP check the user id and pwd you are using.
Regards,
---Satish

When bad file is created then the process stops

hi all,
through interface while we transfer data to a table , if the bad file is created, then the process stops .we want to execute further with all the correct data records excluding records which are in bad file, is it possible ? if yes then how. Because out of 10,000 records if one record is errorneous why the process will stop.
I checked LKM and found the jython script where it checks the return code <> 0 can I do something there to meet our requirements.
regards,
Palash

Hi,
You can do this by implementing error checking in the tool, so that only the bad records will be moved into E$ table and remaining records will insert into the target tables. I hope this will meet your requirements.
Thanks,
Saravanan Rajavel

Flash play installation not work - The exe file deelete automaticly and the process is still running

Flash play installation not work - The exe file deelete automaticly and the process is still running

Why i get no answer?

Can XI process the sold-to IDOC before the processing the ship-to IDOC

Hi Experts,
Can XI process the sold-to IDOC before the processing the ship-to IDOC? For example if I have 10 IDOCs for both sold-to and ship-to, Can XI process all Sold-To IDOCs first, then process the ship-to IDOCs right after? I know that this can be acheived by using BPM. Is there any other way?
Thanks and regards,
Prasad

There exist a possibility to serailize the idocs based on various criteria
http://help.sap.com/saphelp_erp2004/helpdata/en/0b/2a66c9507d11d18ee90000e8366fc2/frameset.htm
Regards,
Prateek

I have a site with m4v files that played before the upgrade to 10.6.7, now just sound

I have a site with m4v files that played before the upgrade to 10.6.7, now when accessed the sound plays but no video. Is there a different file type I should create or is this a glitch w/this version? Played before & still plays-Mac b4UG-PC/Iphone/Ipad.
Page Link: http://www.myfarrah.com/My_Farrah_Actress.php
You can click the video link to play or...
Video Link: http://www.myfarrah.com/ACT7.php
Code:
<table width="444px" border="0" cellpadding="0" align="left"><object width="444" height="285" border="0"><param name="movie" value="http://www.myfarrah.com/bbed/bb2.m4v"></param><embed src="http://www.myfarrah.com/bbed/bb2.m4v" type="application/movie" width="444" height="285" border="0"></embed></object><p>

Are you using Safari or Firefox? It runs as expected in Firefox, but in Safari I too get just the sound, and going to the m4v link causes the movie to download rather than play (it downloads fine and plays in Quicktime once downloaded). I checked some of my own m4v movies, and they were playing fine in Safari. For one embedded in a complex web page, see here:
http://www.pinkmutant.com/articles/snowleo.html
The next m4v has its very own very simple page, with the movie called using an embed tag with various options set (you can see the details by going to View->View Source) and also plays:
http://homepage.mac.com/francines/Movies/duomo.html
There was a problem with a Safari plug-in misbehaving very early in Snow Leopard, but I no longer remember the details. But see this archived discussion:
https://discussions.apple.com/thread/2158092?start=0&tstart=0
It was a rather complex problem, but I had thought one of the updates fixed it.
Francine

File adapter polls before the processing is finished in R3

Similar Messages

Maybe you are looking for