File Adapter strips XML Schema content?

I'm currently using WLI 7.0 and the File Adapter. When I create an event through
WLAI and attach my xml schema, WLAI is stripping values from my schema. Is this
by design?
Node before import:
<xsd:any processContents="skip" minOccurs="0" maxOccurs="unbounded">
Node after import:
<xsd:any minOccurs="0" maxOccurs="unbounded">
The processContents value is very important since I don't want validation to occur
on this node. Any ideas?
Thanks.

Similar Messages

Adapter Engine XML Schema Validation Error Surpression

We recently developed a number of web services that are called by 3rd parties outside our network. The web service request once made is picked up by a Web Dispatcher which then forwards the request to the de-central adapter. Both of these components reside within within a DMZ.
We have, as an additional security measure made use of the new Adapter Engine XML Schema validation available with PI 7.1, to ensure that the payload of incomming messages is checked to ensure that it is a known structure.
Now here is my problem, we recently had these services penetration tested by a 3rd party to ensure that they were secure and whilst the report was very good showing no major weaknesses they did pickup on a couple of items including that the fact that if the XSD to be used during payload message validation cannot be found an 'ADAPTER.JAVA_EXCEPTION' is returned to the web service consumer that highlights the path details of where the XSD should be (but could not be found).
This was viewed as useful to an attacker for a number of reasons:
1. Feedback in SQL injection attempts via verbatim DB error messages greatly improves attacker efficiency
2. Path information is useful to the attacker for OS fingerprinting, directory traversal attempts
3. Other miscellaneous stack trace information is useful to an attacker to understand how the application works
Is there anyway this can be surpressed so that the adapter does not show this information in the returned error message - see example message below ?
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema MaintenanceOrderByIDQuery_sync.xsd not found in E:\usr\sap\DPI\DVEBMGS40\j2ee\cluster\server0\validation\schema\f7cd3b50a87411e08830ed9d0af006a5\urnstw.contractor.wfm.workorderretrieval\MaintenanceOrderByIDQueryRequest_Out\httpsap.comxiSAPGlobal20~Global\MaintenanceOrderByIDQuery_sync.xsd (validation\schema)
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)
     at sun.reflect.GeneratedMethodAccessor497.invoke(Unknown Source)
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: Schema Schema1.xsd not found in E:\usr\sap\DPI\DVEBMGS40\j2ee\cluster\server0\validation\schema\f7cd3b50a87411e08830ed9d0af006a5\urnstw.contractor.wfm.workorderretrieval\MaintenanceOrderByIDQueryRequest_Out\httpsap.comxiEA-APPLSEGlobal\Schema1.xsd (validation\schema)
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)

Hi,
We are having the same problem, so you are not alone.
I had an extensive call with Azure premium support and we where able to determine that:
- Nothing is missing or in the wrong place in my exported .xml file.
- Any changes to the VNET's using the web gui interface of https://manage.windowsazure.com is not possible when you have dns servers and use an gateway
- You can download the .xml configuration file of the network and make manual changes to it, then import it again , to add/remove dns servers and or subnet's.
I am currently waiting for an solution, i have let them lower the urgency from A to B (because i can make changes trough xml) and responded to the next support contact (saying he will continue with the issue) that the problems seems to be with azure and
he should speak with the previous person helping me. I have not heard from Azure support since.
SR Number:115021812414226
Open on:02/18/2015 09:28
> There are networks with and without gateways created and the issue is happening on all the networks.
> We are unable to add or remove the DNS servers. (by web gui)
> Also not able to add or remove any subnets. (by web gui)
> Every time the error message is same but the DNS server name is different. (from another subnet then the one we are changing)
> Created CRI- 3405931, but they said it will need WATS team.
> Confirmed with WATS engineer as well and moving case to WATS.
> Cx agreed to lower the severity of the case as they are able to make changes through the network configuration file.
> But they still want to get this resolved soon.
> Agreed and dropped off, reducing severity to B 24/7.
I hope microsoft is going to resolve this soon, as i do not want to edit my xml for little things like adding a subnet all the time. I have requested an status update in the issue.
Should anyone have more information on this, please share it here.

File Adapter - Attribute xml.documentName

Hi,
We are on XI 2.0 SP05. We are having trouble with the inbound file adapter configuration of the attributes xml.documentName and xml.structureTitle.
Identified in the file adapter are:
xml.structureTitle=DT_XXX
xml.documentName=MT_XXX
But, the flat file gets converted with the standard
<resultset>
<row>
<test />
</row>
</resultset>
Any help in this matter is greatly appreciated.
Thanks in advance,
Doo

Hi Doo,
I am assuming you are using mode FILE2XMBWITHROWCONVERSION.
Only xml.structureTitle can be set in this mode. the XML document will look like this:
<resultset>
<structureTitle>
<fieldName1>...
If you are using mode FILE2XMBWITHSTRUCTURECONVERSION, you have to set
xml.recordsetStructure=<nameA,nA,nameB,nB...>
xml.recordsetName=<rsName>
xml.recordsetNamespace=<rsNamespace>
xml.documentName=...
xml.nameA.structureTitle=...
Please follow carefully the adapter documentation.
Regards,
Hart

OESB File Adapter (Read .xml file to Write .xml)

Hi All,
The fileRead adapter of reading xml format file not writing the content to another xml file.
In detail, I have a xml file of type (myschema.xsd) to pick using read operation will transform to output directory as xml format (pls find attachment as myschema1.xsd) is not writing the content in out xml file rather writing an empty elements. The same thing working with CSV to CSV.
Has anybody come across the same? Also found out the same issue with BPEL file adapter as well.
Any light on this will very much appreciated
myschema.xsd
+<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.example.org" targetNamespace="http://www.example.org/readFile" xmlns:ns1="http://www.example.org/readFile" elementFormDefault="qualified">
<xsd:element name="Opportulity">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Customer" type="ns1:Customer" />
<xsd:element name="Account" type="ns1:Account" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="Customer">
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Account">
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>+
myschema1.xsd
+<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://www.example.org" targetNamespace="http://www.example.org/writeFile" xmlns:ns1="http://www.example.org/writeFile" elementFormDefault="qualified">
<xsd:element name="Customer">
<xsd:complexType>
<xsd:sequence>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>+
Regards
Venkata Madhu

xslt
<?xml version="1.0" encoding="UTF-8" ?>
<?oracle-xsl-mapper

<mapSources>
<source type="WSDL">
<schema location="readFile.wsdl"/>
<rootElement name="Opportulity" namespace="http://www.example.org/readFile"/>
</source>
</mapSources>
<mapTargets>
<target type="WSDL">
<schema location="writeFile.wsdl"/>
<rootElement name="Customer" namespace="http://www.example.org/writeFile"/>
</target>
</mapTargets>

?>
<xsl:stylesheet version="1.0"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:ehdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.esb.server.headers.ESBHeaderFunctions"
xmlns:ns0="http://www.w3.org/2001/XMLSchema"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/writeFile/"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:imp1="http://www.example.org/readFile"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:orcl="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:ns2="http://www.example.org/writeFile"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/readFile/"
xmlns:hdr="http://xmlns.oracle.com/pcbpel/adapter/file/"
exclude-result-prefixes="xsl plt pc ns0 jca imp1 tns hdr ns1 ns2 bpws ehdr hwf xp20 xref ora ids orcl">
<xsl:template match="/">
<ns2:Customer>
<ns2:RoleType>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:RoleType"/>
</ns2:RoleType>
<ns2:FirstName>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:FirstName"/>
</ns2:FirstName>
<ns2:LastName>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:LastName"/>
</ns2:LastName>
<ns2:CustomerID>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:CustomerID"/>
</ns2:CustomerID>
<ns2:Nationality>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:Nationality"/>
</ns2:Nationality>
<ns2:Phone>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:Phone"/>
</ns2:Phone>
<ns2:EmailAddress>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:EmailAddress"/>
</ns2:EmailAddress>
<ns2:AddressLine1>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:AddressLine1"/>
</ns2:AddressLine1>
<ns2:AddressLine2>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:AddressLine2"/>
</ns2:AddressLine2>
<ns2:City>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:City"/>
</ns2:City>
<ns2:State>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:State"/>
</ns2:State>
<ns2:County>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:County"/>
</ns2:County>
<ns2:Postal>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:Postal"/>
</ns2:Postal>
<ns2:Country>
<xsl:value-of select="/imp1:Opportulity/imp1:Customer/imp1:Country"/>
</ns2:Country>
</ns2:Customer>
</xsl:template>
</xsl:stylesheet>
Venkata Madhu

One File Adapter, many xml types

Hi,
I have to use file sender adapter to read files from a directory. The files are in XML format. Each file has a different XML structure and I can not distinguish by the name file the type of XML that goes into the file. How can I do that ?.
Thanks.
Best regards

Hi Francisco,
hopefully you solved the issue already, but maybe someone else has the same issue.
I just faced the same challenge.
In my scenario the all message types have the same receiver but different inbound interfaces and mappings should be used.
I solved it by checking the root element with a xpath content based routing in the interface determination.
It's important that you register the different namespaces used by the message types and then just insert the root element name and as compare operation select EX
In my sample I have to deal with two message types which use different namespaces.
message type1 eCH-0020:delivery xmlns:eCH-0020="http://www.ech.ch/xmlns/eCH-0020/2"
message type2 eCH-0078:eventReport xmlns:eCH-0078="http://www.ech.ch/xmlns/eCH-0078/2"
Therfore I inserted both namespaces in the table of the expression editor
prefix eCH-0020 namespace http://www.ech.ch/xmlns/eCH-0020/2
prefix eCH-0078 namespace http://www.ech.ch/xmlns/eCH-0078/
the value of the prefix is up to you, I decided to use descriptive namespaces
and then insert follwing XPATH expressions
/eCH-0078:eventReport EX
/eCH-0020:delivery EX
that's it
hope this helps.
Best regards,
Jochen

How do you create an xsd file for an xml schema in BI Publisher?

Helllo.
I hope this is a really daft question for somebody..
How I create an xsd file to be used as an xml schema to attach to a Data Definition that Ive created? I've obv. got the xml and rtf files ready and attached. I've looked through the relevant docs (XML Publisher Report Designer's Guide.pdf & XML Publisher Administration and Developer's Guide.pdf) but can't find where..
Once this has been done then I can run the template via ORACLE Financials for the reports I've converted.
many thanks..
Steven

I don't think you need to have an XSD it's an optional field. If you really want to create one use this site: http://www.hitsw.com/xml_utilites/
I believe I answered your question, don't forget to give me the points.
Ike Wiggins
http://bipublisher.blogspot.com

How to generate a XML file from a XML schema...?

Hi guys...!
I have a XML schema and I want to write a XML file based on that schema. I have heard about this feature that eclipse has, which given a XML schema, can generate a XML file for you.
Does anyone of you know about this feature? or is there another way to do it. The schema that I have is very huge...
I will really appreciate any help from you guys...
Thank...you..
--- Spirit Away...

don't cross post
http://forum.java.sun.com/thread.jspa?threadID=649205&tstart=10

File adapter problem - xml file

Is there a way to define in the sender file adapter the document name for a XML file?
This is the xml file that arrives to XI,
<?xml version="1.0" encoding="UTF-8" ?>
<dataroot generated="">
<Materials1>
<CODE>FAMILY</CODE>
<TYPE>A75</TYPE>
<NAME_EN>LUBRICANT</NAME_EN>
<NAME_ES>LUBRICANTES</NAME_ES>
<NAME_DE>LUBRICANT_GERMAN</NAME_DE>
</Materials1>
</dataroot>
I have to define the name of the Message Type as "dataroot" in order to avoid problems at mapping time. The problem is that I get from MDM the same structure begin each time,
<dataroot generated="">
Is there a way to define the XML Document Name in the Sender File Adapter?

Hello Rob,
FOr ""dataroot" element "generated" is the attribute.... define this attbute in the datatype as well..
Thanks,
Himadri

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

File Adapter write XML file with special characters

Hi,
I have a BPEL processes which use DB adapter to retrieve record and output in a XML document using File Adapter.
In the table, some records contain these special characters - ">" , "<" , "." . I was expecting the file adapter will convert it to escape characters, but it didn't happen. it just put the same value back to the XML file, which cause other system to reject the file. Do anyone know how to resolve this ?
The version of SOA is 10.1.3.4
Thanks for the help.
Calvin
Edited by: user12018221 on May 25, 2011 1:48 PM

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

Error in xml file validating to xml schema

Hey,
I am getting the following error while validating xml file to its schema:
The error is:
SAMPLEITEMDLFILE.xml:2,139: no declaration found for element 'WMWROOT'
The XML document SAMPLEITEMDLFILE.xml is NOT valid (1 errors)
schema file:
<?xml version="1.0" encoding="utf-8" ?>
<xs:schema id="ItemDownload" targetNamespace="http://www.manh.com/ILSNET/Interface" elementFormDefault="qualified"
xmlns="http://www.manh.com/ILSNET/Interface" xmlns:xs="http://www.w3.org/2001/XMLSchema" version ="2007">
<xs:include schemaLocation="Item.xsd" />
<xs:element name="WMWROOT" nillable="true" type="WMWROOT" />
<xs:complexType name="WMWROOT">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" name="WMWDATA" type="WMWDATA" />
</xs:sequence>
</xs:complexType>
<xs:element name="WMWDATA" nillable="true" type="WMWDATA"/>
<xs:complexType name="WMWDATA">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" name="Items" type="ItemList" />
</xs:sequence>
</xs:complexType>
<xs:element name="Items" nillable="false" type="ItemList" />
<xs:complexType name="ItemList">
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" name="Item" nillable="true" type="Item" />
</xs:sequence>
</xs:complexType>
</xs:schema>
This is the part of PL/SQL code thru which I am generating the xml:
UTL_FILE.put_line (l_out_file, '<?xml version="1.0" ?>');
UTL_FILE.put_line (l_out_file, '<WMWROOT');
UTL_FILE.put_line (l_out_file, 'xmlns="http://www.manh.com/ILSNET/Interface"> ');
UTL_FILE.put_line (l_out_file, '<WMWDATA>');
UTL_FILE.put_line (l_out_file, '<Items>');
I am validating it in stylus studio tool.
Can any1 tell me where I am goin wrong?

Hi,
I am using databse version 10.2.0.03. I am getting the output of xml file like tis:
<?xml version="1.0" ?>
<WMWROOT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.manh.com/ILSNET/Interface ItemDownload.xsd">
WMWDATA>
<Items>
<Item>
<action>Save</action><UserDef8>10074</UserDef8><active>Y</active><availableonweb>N</availableonweb><cost>285.93</cost><desc>HP DESKJET PRINTER (EMBLA)</desc><HarmCode><Identifier>9019.20.0000</Identifier></HarmCode><Item>R145-794</Item><InventoryTracking>Y</InventoryTracking><LongDesc>HP DESKJET PRINTER (EMBLA)</LongDesc><LotControlled>Y</LotControlled><SerialNumTrackInbound>Y</SerialNumTrackInbound><SerialNumTrackInventory>Y</SerialNumTrackInventory><SerialNumTrackOutbound>Y</SerialNumTrackOutbound><StorageTemplate><Template>Each</Template></StorageTemplate><XRefs><XRef></XRef></XRefs>
</Item>
</Items>
</WMWDATA>
</WMWROOT>
My plsql code is like tis:
SELECT /*rule*/
XMLELEMENT (
"Item",
XMLFOREST (action AS "action",
Userdef8 AS "UserDef8",
active AS "active",
availableonweb AS "availableonweb",
cost AS "cost",
description AS "desc"),
XMLELEMENT ("HarmCode",
XMLFOREST (Identifier AS "Identifier")),
XMLFOREST (
Item AS "Item",
inventorytracking AS "InventoryTracking",
Longdesc AS "LongDesc",
lotcontrolled AS "LotControlled",
serialnumtrackinbound AS "SerialNumTrackInbound",
serialnumtrackinventory AS "SerialNumTrackInventory",
serialnumtrackoutbound AS "SerialNumTrackOutbound"),
XMLELEMENT ("StorageTemplate",
XMLFOREST (Template AS "Template")),
XMLELEMENT (
"XRefs",
XMLELEMENT ("XRef", XMLFOREST (XRefItem AS "XRefitem")))).
getclobval ()
----------------------------------------writing to utl file-------------
l_out_file :=
UTL_FILE.fopen (lv_path,
-- lv_out_file,
'testingitemsdl.xml',
'W',
32767);
UTL_FILE.put_line (l_out_file, '<?xml version="1.0" ?>');
UTL_FILE.put_line (l_out_file, '<WMWROOT');
UTL_FILE.put_line (l_out_file, 'xmlns="http://www.manh.com/ILSNET/Interface"> ');
UTL_FILE.put_line (l_out_file, '<WMWDATA>');
UTL_FILE.put_line (l_out_file, '<Items>');
FOR i IN lc_item_info
LOOP
UTL_FILE.put_line (l_out_file, i.item);
END LOOP;
UTL_FILE.put_line (l_out_file, '</Items>');
UTL_FILE.put_line (l_out_file, '</WMWDATA>');
UTL_FILE.put_line (l_out_file, '</WMWROOT>');
UTL_FILE.fclose (l_out_file);

Receiver File Adapter: Problem with NewLine Content Conversion Parameter

Hello Everybody
On our SAP-XI (SAP NetWeaver 2004s, sp14) I have the scenario to send a price catalogue (IDoc PRICECATALOGUE.PRICECATALOGUE02) from SAP R/3 as csv PRICAT file to a file share.
In the receiver communication channel I have defined
Message Protocol = File Content Conversion
using the following RecordSet:
RecordSet = HeaderRow,MainBody
One header row is followed by one or more main body rows. The csv PRICAT message format demands that there is an empty row (i.e. one carriage return) between header and main body and another carriage return after the last main body row:
<Header Row>
carriage return
<MainBody 1>
<MainBody 2>
carriage return
As content conversion parameters I tried to use NewLine ('nl') to create the carriage returns in the file:
HeaderRow.fieldSeparator = ,
HeaderRow.endSeparator = 'nl'     " new line
MainBody.fieldSeparator = ,
MainBody.endSeparator = 'nl'
Using the settings I have been able to created the carriage return at the end of the file but not the one between header and main body.
As workaround I have used the following approach:
" Add the following XSLT mapping between header and body:
            <SeparatorLine>
                <value>
                    <xsl:value-of select=" '' "/>
                </value>
            </SeparatorLine>
RecordSet and parameters have been changed accordingly:
RecordSet = HeaderRow,SeparatorLine,MainBody
HeaderRow.fieldSeparator = ,
HeaderRow.endSeparator = 'nl'
SeparatorLine.fieldFixedLength = 0,0   " sic!
MainBody.fieldSeparator = ,
MainBody.endSeparator = 'nl'
Has anybody an idea why I failed to receive the first carriage return and has somebody a more elegant solution?
Kind Regards
   Uwe

Hi,
Thanks for reply. I have already used 'nl'.
When i open into the notepad it is showing [] boxes rather then new line.
e.g. 1 [] 2 []
but when we open into wordpad it opens properly.
Customer wants when he opens in notepad it should show line by line.
e.g.
1
2
How should i convince to customer ?

Need help with reading XML using File Adapter

I have created a simple BPEL process that uses a file adapter to read files containing XML messages of a simple xsd schema. But when reading the xml, I get the following error message:
[2010/03/01 23:43:13] Invalid data: The value for variable "Receive_1_Read_InputVariable", part "revision-report" does not match the schema definition for this part.The invalid xml document is shown below: More...
[2010/03/01 23:43:13] "{http://schemas.oracle.com/bpel/extension}invalidVariables" has been thrown. less
-<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>
9710
</code>
</part>
-<part name="summary">
<summary>
Invalid xml document.
According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.4: Attribute 'doc' must appear on element 'revision-report'.
Error::cvc-complex-type.4: Attribute 'model' must appear on element 'revision-report'.
Error::cvc-complex-type.4: Attribute 'pubdate' must appear on element 'revision-report'.
Error::cvc-complex-type.2.4.b: The content of element 'revision-report' is not complete. One of '{"http://xmlns.oracle.com/xmlfile":alternategroup}' is expected.
Please make sure that the xml document is valid against your schemas.
</summary>
</part>
</invalidVariables>
It seems that there is some issue with the namespace, but even after trying out various combinations, I am not able to resolve this.
Here the message schema (xsd):
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/xmlfile"
xmlns:tns="http://xmlns.oracle.com/xmlfile"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="revision-report">
<xs:complexType>
<xs:sequence maxOccurs="unbounded">
<xs:element name="alternategroup">
<xs:complexType>
<xs:attribute name="name" use="required" type="xs:string"/>
<xs:attribute name="Desc" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="doc" use="required" type="xs:string"/>
<xs:attribute name="model" use="required" type="xs:string"/>
<xs:attribute name="pubdate" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:schema>
And here is the xml file to be read by the file adapter:
<?xml version="1.0" encoding="UTF-8" ?>
<revision-report doc="doc2" model="model4" pubdate="pubdate5">
<alternategroup Name="ABC" Desc="ABC-Desc">
</alternategroup>
<alternategroup Name="DEF" Desc="DEF-Desc">
</alternategroup>
<alternategroup Name="GHI" Desc="GHI-Desc">
</alternategroup>
</revision-report>
Appreciate any help.
Thanks in advance for your attention.
Jay

Thanks for your response.
I am not sure if there is any easier way, but I tried out the following tool available on the net to check an xml against a xsd:
http://tools.decisionsoft.com/schemaValidate/
There were a few issues, that I corrected and finally had a xsd and xml that were matching and valid. I tried this out in my file reading BPEL process, but the error still remained the same!
Here is my updated/simplified xsd and xml:
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema targetNamespace="http://xmlns.oracle.com/xmlfile"
xmlns:tns="http://xmlns.oracle.com/xmlfile"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://xmlns.oracle.com/xmlfile">
<xs:element name="revision-report">
<xs:complexType>
<xs:sequence>
<xs:element maxOccurs="unbounded" ref="alternategroup"/>
</xs:sequence>
<xs:attribute name="doc" use="required" type="xs:string"/>
<xs:attribute name="model" use="required" type="xs:string"/>
<xs:attribute name="pubdate" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
<xs:element name="alternategroup">
<xs:complexType>
<xs:attribute name="Name" use="required" type="xs:string"/>
<xs:attribute name="Desc" use="required" type="xs:string"/>
</xs:complexType>
</xs:element>
</xs:schema>
<?xml version="1.0" encoding="UTF-8" ?>
<revision-report doc="doc2" model="model4" pubdate="pubdate5" xmlns="http://xmlns.oracle.com/xmlfile">
<alternategroup Name="ABC" Desc="ABC-Desc"/>
<alternategroup Name="DEF" Desc="DEF-Desc"/>
<alternategroup Name="GHI" Desc="GHI-Desc"/>
</revision-report>
I even tried the option that is available in JDeveloper to generate a sample xml from a xsd (when in the context of a Transformation activity). The xml generated by this also seems exactly like the one above.
So, I am not able to figure out why my BPEL process errors out with the message Invalid xml document.

Logon Error in importing XML file by import type - Schema in import Manager

Hi,
I am trying to import the xml file by selecting type XML Schema. I have already created an XML Schema in console based on the XSD file from my desktop and the same is visible in dropdown of XML Schema Tab while importing.
But I am not able to import the XML file based on the XML Schema. I got the Logon Error As : "Cannot load XML file"
Content of the error is like -
(Error:
Commerror80004005 Unsepcified error
Source=mdxml4.dll Description= file:///C:/DOCUM...............
The Namespace provided Differs from the schema's 'http://n............)
Please have you inputs as this is a very critical requirement to pull the XML file based on XML schema automatically based on the ports created in console.
Response wud be highly appreciated.
Thanks & Rgds/Pawan

Hi Jason,
Thanks for your response!
I don't mind you in taking my thread to core MDM stuff. It would be big relief for to have an response on my query.
Actually this is a problem with respect to SRM MDM Catalog.....
I am waiting see the following response threads based on my query..
Thanks once again!
Best Rgds/Pawan

File Adapte picking up XML if XSD valid without verifing the XSD in adapter

hi',
I am facing one issue
I have a sample XML file which I want to read through BPEL process
for this I have configured the file adapter with the schema and reading the file adapter with the receive activity
next I have created one XSD file (which file adapter referes to) and one XML file,
File adapter reads it after the XML file gets validated with the XSD which is kept in a location *'/test/xsd/emp.xsd'*,
now the issue is that the file adapter is picking up and initiating the process without verifying the XSD mentioned in the adapter
it is only checking the XML file with the XSD mentioned in the XML,
for example if I have a xml file which is refering to some other schema it also gets read by file adapter without worring about what schema is mentioned in file adapter
please advice me is this the way File adapter works in Oracle BPEL or I am doing some thing wrong
I am using SOA suite 10.1.3.3.0 which is deployed in UNIX enviornment.
thanks
Yatan

thanks Ketan ,
as you suggested, after adding validateXML to true, the XML is getting validated to the XSD in the adapter,
the process is getting invoked and the receive activity is throwing error of 'Invalid XML', this is perfect as I expected
however now the issue is, the file which is invalid in terms of XSD present in the file adapter is still being archived to 'success dir' i.e. 'LogicalArchiveDirectory', ideally it should have moved to fail directory,
but if the XML file is not complete or having some error in terms of the XSD it is refering to 'target namespace' and 'target location'
then it will move to the fail directory and the receive activity is also showing the error,
see this is how I have configured my bpel.xml file for the file adapter.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="Read_Tph_ProdTrans_File">
<property name=*"prod_trans_success_file" type="LogicalArchiveDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/success</property>
<property name=*"prod_trans_incoming_file" type="LogicalDirectory"*>/aaa/bb/ccc/wis/tph/bpl_inbound/adjust/new</property>
<property name="portType">Read_ptt</property>
<property name="rejectedMessageHandlers">file:///aaa/bb/ccc/wis/tph/bpl_inbound/adjust/fail</property>
</activationAgent>
please advice how to bring this adapter to proper behaviour.
thanks
Yatan

File Adapter strips XML Schema content?

Similar Messages

Maybe you are looking for