File Content Conversion - Multiple KeyField
Hi Experts,
I have the following structures with 2 keyfields
<Structure1>
keyfield1 - value 1
keyfield2 - value 1
<Structure2>
keyfield1 - value 1
keyfield2 - value 2
<Structure3>
keyfield1 - value 2
keyfield2 - value 1
<Structure4>
keyfield1 - value 9
keyfield2 - value 1
Pls advise me, is it possible to have multiple keyfield in our FCC?
If so, advise me how to handle this.
Thanks in advance.
Regards
Bala.
Bala,
The best thing would be if it is a fixed length file then take field1 and field2 as concatened and as one field which would be your key field. Once when you pick up you can take a substring in the mapping for this field and can map. If you are reading a csv then go with the same approach and take a substring after comma.
Regards,
---Satish
Similar Messages
-
Receiver File Content Conversion - Multiple Hier. Levels, Several Files
you can create several files using single message execution.
one source message structure and target multiple messgae types(0..1) occurance
and same thing you can implement in your Interface mapping.
1 -> Multiple Inbound interfaces
your target final strcture would be with Header,lineitems.
your JDBC->XI Intermedicate.
XI Intermediate ->XI final (this final structure will create the your file)
that way you can design your scenario.
Regards,
Venu.Hello Venu, thanks for answering,
When you talk about intermediate structure you are referring to the approach I mentioned in the link above or to something that can be done using the same scenario structure I have right now?
I am going I little bit deeper in my scenario just in case I havent been so clear in my first explanation:
Lets suppose I have 3 stores: 1001,1002,1003
For each store there are 2 items: 999,888
So XI retrieves the information from the DB thru a stored procedure. This is the output:
STORE--PLU
1001--999
1001--888
1002--999
1002--888
1003--999
1003--888
Please note the information is coming in a flat structure. In the beginning I tried to separate it into several outputs (selects) as shown below but I relaized that was not possible to be handled by XI:
STORE--PLU
query 1
1001--999
1001--888
query2
1002--999
1002--888
query
1003--999
1003--888
That would have been the best approach as I would have generated one single file for each message and thats it, but unfortunately, Xi does not work that way with MSSQL Queries. So I had to made something up based on the answers I got from the SDN experts (Link is below in first message). There was when I used context handling for generating the structures myself within one single message.
In the scenario shown above I would have just needed to generate the following structure for creating messages from the source:
Level1: Main Node
Level 2: Header
Level 2: Body
But now, As I am forced to generate my 3 structures within 1 single message, I had to insert one more node to wrap header and body in per iteration (as a file would do):
Level1: Main Node
Level2: File
Level3: Header
Level3: Body
And that is the problem I am asking help for, that allegedly, XI File Content conversion can just handle up to 2 levels.
Thanks again for answering Venu.
Regards.
Edited by: Anibal Granado on May 12, 2010 11:34 PM -
File Content Conversion - Error in keyfield Value
Hello experts,
I am doing file content conversion for a file to file scenario. The input file is a csv file which is converted to xml using the file content conversion. The key field of input file is used for implementing conversion.
While testing the FCC, I noticed that if the keyfield value is wrong for a record in the file, the record is ignored altogether without throwing any errors or warnings. Is there any way to notify if any records have been ignored as a result of incorrect keyfield value??
Thanks in advance!
RRThere seems to be NO way to handle it in FCC.
File Content Conversion - Key Field Value
u can think of work arounds by handling it in mapping....
-santosh. -
File Content Conversion in Reciever Adapater for multiple element
Hi folks,
My Source file structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:file_sender_mt xmlns:ns0="urn:filetofiledemo">
<recordset>
<data1>
<name1>a</name1>
<age1>b</age1>
</data1>
<data>
<name>c</name>
<city>d</city>
<age>e</age>
</data>
</recordset>
</ns0:file_sender_mt>
in my file reciever adapter i am uisn file content conversion and these are the parameters that i have given
reordesetStructure -->
recordset,data1,data,FileNameNode
Name value
recordset.fieldSeparator '0x09'
data1.fieldSeparator '0x09'
data.fieldSeparator '0x09'
data.endSeparator '0x09'
'0x09' is the hex vale for tab
My o/p file is coming as
a b
c d e
the desired o/p is
a b c d e
Any idea on this
Thanks
AmitHi Amit,
You can try using this approach.
You can create two data types.
The input data type is of the input file format.
The output data type can have all the five tags (Name1, Age1, Name, City and age) under one header tag(data1), instead of two tags(Data1, data) in the input file.
Then in the receiver channel u can define the reordesetStructure -->
recordset,data1,FileNameNode
This will produce the output data in one line.
Regards
Neetu -
File content conversion in Sender Adapater for multiple occurances
Hi ,
I am mapping from flat file to idoc .
My flat file is a tab demilited
Since the idoc would have structure
like header , lineitem , schedule
in my flat file conversion
i am giving recordset structure
as header,1,lineitem ,,schedule,
since lineitem would be repeated many times
Bt if i give * i need to give a keyfieldname
which would mean that keyfieldname has to appaer in header and schedule .
since in my case my Column values in header , lineitem and schedule are different
how can i do the file conversion in this case
i can doing something like this
header.keyFieldValue ""
schedule.keyFieldValue ""
header.keyFieldInStructure ignore
schedule.keyFieldInStructure ignore
i am not even sure if thats the correct way
Thanks
AmitHi Amit,
Take a look at these...
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
cheers,
Prashanth
P.S Please mark helpful answers -
Problem with file content conversion for multiple substrcture. Please help!
Hi Experts,
I am using file content conversion in file sender communication channel. The input file is a flat file with data like this:
A01 AA8I0NBVDA 20090704 84900
A02 AA8I0NBVDA 20090704 84900
A03 AA8I0NBVDA 20090704 84900
I want the data in sender side after content conversion to be like this:
<ns:Receive_Schedules xmlns:ns="http://mynamespace">
<ScheduleData>
<line>A01 AA8I0NBVDA 20090704 84900</line>
<line>A02 AA8I0NBVDA 20090704 84900</line>
<line>A03 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
</ns:Receive_Schedules>
I have tried many options in file content conversion but getting the data like this:
<ns:Receive_Schedules xmlns:ns="http://mynamespace">
<ScheduleData>
<line>A01 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
<ScheduleData>
<line>A02 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
<ScheduleData>
<line>A03 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
</ns:Receive_Schedules>
Following are the settings/properties have configured in content conversion:
Document Name Receive_Schedules
Document namespace http://mynamespace
Document Offset <no value>
Recordset Name <no value>
Recordset namespace <no value>
Recordset structure ScheduleData,*
Recordset sequence Ascending
Recordsets per message 1
Key field Name <no value>
Key Field Type String
ignoreRecordsetName true
ScheduleData.endSeparator 'nl'
ScheduleData.fieldNames line
ScheduleData.fieldSeparator 'nl'
How to get the desired message? What changes I need to do in content conversion settings? Please help!
thanks
Gopal
Edited by: GOPAL BALIGA on Jul 1, 2009 12:11 PMHi Ranjan,
My structure is like what you ahve defined.
scheduledata...1.1
...line....0...Unbound
I also tried the parameters you gave but still getting the same.
<ns:Receive_Schedules xmlns:ns="http://mynamespace">
<ScheduleData>
<line>A01 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
<ScheduleData>
<line>A02 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
<ScheduleData>
<line>A03 AA8I0NBVDA 20090704 84900</line>
</ScheduleData>
</ns:Receive_Schedules>
Following are the settings/properties have configured in content conversion:
Recordset structure ScheduleData,* -
> Is the value correct?
Recordset sequence Ascending -
> Is the value correct?
Recordsets per message 1 -
> Is the value correct?
ignoreRecordsetName true
ScheduleData.fieldSeparator nl
ScheduleData.fieldNames line
ScheduleData.endSeparator nl
Edited by: GOPAL BALIGA on Jul 2, 2009 5:28 AM -
File Content Conversion with Multiple structures
Here is the scenario
Legacy to XI -> XI to R/3 (App Server)
txt file and fixed length.
<b>Test file</b>
100WELCOME 0430000960603201321
2000000000040008000803
<b>Table2</b>
RecordType
PriorityCode
Destination
BankOrginNo
CreationDate
CretionTime
Spaces
<b>Table2</b>
RecordType
Destination
BankOrginNo
ReferenceCode
ServiceCode
RecordLength
CharactersPerBlock
PartialCompression
CompressionSpaces
<b>Content Conversion Parameters:</b>
Document Name: Details
RecordsetName : recordset
Recordsetstructure : Table1,1,Table2,*
Recordsetsequence: Ascending
RecordsetperMessage: *
Keyfieldname : KF
Kefieldtype : String(Case-Sensitive)
Table1.keyFieldValue :'1'
Table1.fieldFixedLengths:1,2,10,10,6,4,47
Table1.fieldNames :RecordType,PriorityCode,Destination,BankOrginNo,CreationDate,CretionTime,Spaces
Table2.keyFieldValue :'2'
Table2.fieldFixedLengths: 1,10,10,10,3,3,4,1,38
Table2.fieldNames:RecordType,Destination,BankOrginNo,ReferenceCode,ServiceCode,RecordLength,CharactersPerBlock,PartialCompression,CompressionSpaces
ignoreRecordsetName :true
When I am trying with first structure it is working fine, where as 2 structures it is not.
in the adopter monitoring it show it pics the file from Legacy(file adopter display green), where as SXMB_MONI it is not showing any thing.
can any body help on this do I need to maintain any other parameters for file content conversion.
Thanks
MHI,
I can see that.
The number of characters in the file for TABLE2 is lesser then the number of field size given.
for eg. if the table2 fixed field length sum is 20 ,your file contains only 10 characters. Please give complete data for table2
Test file
100WELCOME 0430000960603201321
<b>2000000000040008000803</b>
Table2.fieldFixedLengths: 1,10,10,10,3,3,4,1,38
Ragards
vijaya
Message was edited by: vijaya kumari -
File content conversion: nodes have multiple occurence and is jumbled
Hi,
Here is one structure used in file content conversion.
Header
Dataline1
Dataline1
Dataline1
Dataline2
Dataline2
Dataline2
Header, Dataline1 and Dataline2 are nodes containing more than one fileds.
We have mentioned 'fieldSeparator', 'EndSeparator' and 'keyFieldValue' for each of the nodes Header, Dataline1 and Dataline2 .
Now the requirement has changed and the source file structure is as given below.
Header
Dataline1
Dataline2
Dataline1
Dataline2
Dataline1
Dataline2
Now with the same communication channel, the content conversion picks up only the first occurence of Dataline1, Dataline2 ie only this much
(Header
Dataline1
Dataline2)
is being picked or read.
The other occurences are lost, even though logically it should pick all of them, since 'keyFieldValue' is specified for each node..
Should I give any extra parameters in the communication channel for file content conversion.? or else what is the best way to proceedHi John !
Have you checked the recordset structure in the file content conversion parameters?? like "Header,1,Dataline1,,Dataline2, " to specifiy that it should be 1 header structure, N dataline1 and N dataline2 ??
Regards,
Matias. -
File content conversion in File-to-RFC without BPM
Hi,
I am using FCC for file to RFc scenario.
My input record is in the following format:
Header record
data rec1
data rec2
Trailer record..
The parameters are used in File content conversion:
Recordset Name : Header,item
Recordset Structure: Header,1,item,*
key field name : data1
and in additional parameters:
Header.fieldNames HI,GenDate,Ftype,Fname,Fdate
Header.keyFieldValue Fname
Header.fieldFixedLengths 1,8,1,50,8
Header.endSeparator nl
item.endSeparator nl
item.fieldNames DATA1,DATA2,DATA3,DATA4
item.keyFieldValue item
item.fieldFixedLengths 231,240,241,120
item.lastFieldsOptional YES
Can anyone check whether any parameters are left, b'cos the file is not being read with this settings. and in the C.C its just showing file processing successfully but not able to see the actual file.Hi,
I assume you have header, item and trailer structure in source file.
Source Data Type will be as follows.
RecordSet
--> Header
--> KeyField(Value OH)
--> H1
--> H2
--> Item
--> KeyField (Value OL)
--> I1
--> I2
-->Trailer
--> KeyField (Value OT)
--> T1
--> T2
Where Item Strucutre can come multiple times.
Please use following settings.
Recordset name: RecordSet
RecordSet Structure: Header,1,Item,*,Trailer,1
Key Field Name: KeyField
Header.fieldNames: KeyField,H1,H2
Header.fieldFixedLengths: 2,3,4
Header.processFieldNames: fromConfiguration
Header.keyFieldValue: OH
Header.LastFieldsOptional: YES
Item.fieldNames: KeyField,I1,I2
Item.fieldFixedLengths: 2,5,6
Item.processFieldNames: fromConfiguration
Item.keyFieldValue: OL
Item.LastFieldsOptional: YES
Trailer.fieldNames: KeyField,T1,T2
Trailer.fieldFixedLengths: 2,8,9
Trailer.processFieldNames: fromConfiguration
Trailer.keyFieldValue: OT
Trailer.LastFieldsOptional: YES
Regards,
Gouri -
File Content Conversion Problem
Hi
I have a flat file having 10 fileds with fixed length of field 7 characters
abc bcd dce cef ecf fgi
123 234 343 233 434 343
322 222 222 222 222 222
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
<abc>343</abc>
<bcd>343</bcd>
<dce>434</dce>
<cef>3434</cef>
<ecf>343</ecf>
<fgi>434</fgi>
</SEND>
</ns0:MT_send
As per the client req I'm going with FCC. The file is picking fine with the FILE. But not picking with the FCC.
The parameters which I gave are as follows.
SOURCE I feel it is fine since file is picking fine and keeping the same for FCC also.
PROCESSING
QOS -- Exactly Once
Poll Interval -- 10
Processing Mode -- Delete
Empty-File Handling -- Process empty files
CONTENT CONVERSION Parameters
Document Name -- (am giving sender data type name) DT_send
Document NSpace -- http://OTO-Continue.com
Recordset Name -- SEND
Recordset Structure -- SEND,*
Recordset Sequence -- Ascending
Recordset per Message -- 0
And in the table the parameters am settings are
SEND.fieldNames abc,bcd,cde,def,efg,ghk
SEND.fieldFixedLengths 7,7,7,7,7,7 (because each and every field has 7 characters)
SEND.keepIncompleteFields No
SEND.fieldFixedLengthType char
SEND.fieldContentFormatting trim
SEND.fieldEndSeparator 'nl'
This was the configuration. But this is not working I monitored the Communication Channel and file is not reading and not getting deleting.
What actually went wrong in above configuration. Why it is not working.
Thanks.Hi Swarna,
CONTENT CONVERSION Parameters
Document Name -- ?
DocumentNSpace -- ?
Recordset Name -- ?
Recordset Structure -- ?
Recordset Sequence -- Ascending
Recordset per Message -- ?
Document Name - <Message Type> eg:- (MT_ABC)
DocumentNSpace - Name space of your MT
Recordset Name - The root node( Which has one occurence)
Recordset Structure - The parent node of the fields(can have multiple occurences)
Recordset Sequence -- Ascending
Recordset per Message -- 1/* (No.of records per each record set)
In your structure
+++++++++++++++++++++++++++++++
XML CODE FOLLOWS
+++++++++++++++++++++++++++++++
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_send xmlns:ns0="http://OTO-Continue.com">
-<SEND>
<abc>343</abc>
<bcd>343</bcd>
<dce>434</dce>
<cef>3434</cef>
<ecf>343</ecf>
<fgi>434</fgi>
</SEND>
</ns0:MT_send
There is no root node, so in your FCC you need to mention your RecordsetName and you can ignoreRecordSetName in result structure. Check the following blog simulates your requirement.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
Regards,
Prasanna -
Problem with File Content Conversion
Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PMYou will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ -
File Content Conversion Error in PI 7.1 (file to Proxy)
Hi
I am working on File to Proxy Scenario and I gave the File content conversion as below, File is picking up by the PI Server when I look at Communication Channel Monitoring, However when I open the Message ID in the CC monitoring it says as
404 Not Found
The requested resource does not exist.
and I do not see any message SXMB_MONI(Because the content is not converted), Can anyone give an idea how to debug this
Thanks
PR
Please find the details below which I gave in the content Conversion
Document Name : MT_TW_AK
Document NameSpace : http://aiwcd.com/Claims_Management(CM)_Rel2.0
RecordSet Name : FROISROIAcknowledgement
RecordSet Structure : Header,1,Record,*,Trailer,1
Recordset Sequence : Ascending
KeyField Name :TransactionSetID
Key Field Type : String (Case Sensitive)
IgnoreRecordsetName : true
Header.fieldNames :TransactionSetID,SenderID,ReceiverID,DateTransmissionsent,TimeTransmissionsent,OriginalTransmissionDate,OriginalTransmissionTime,TestProductionCode,InterchangeVersionID
Header.fieldFixedLengths: 3,25,25,8,6,8,6,1,5
Header.keyFieldValue : H
Record.fieldSeparator :
Record.fieldNames : TransactionSetID,RecordSequenceNumber,DateProcessed,TimeProcessed,InsurerFEIN,ClaimAdministratorPostalCode,ClaimAdministratorFein,AcknowledgementTransactionSetID,ApplicationAcknowledgmentCode,InsuredReportNumber,ClaimAdministratorClaimNumber,JuridictionClaimNumber,MaintenanceTypeCode,MaintenanceTypeCodeDate,RequestCode,FreeFormText,NumberofErrors,MaintenanceTypeCorrectionCode,MaintenanceTypeCorrectionCodeDate,JurisdictionBranchOfficeCode,ClaimAdministratorAlternatePostalCode,NumOfErrors
Record.fieldFixedLengths: 3,9,8,6,9,9,9,3,2,25,25,25,2,8,3,60,2,2,8,2,9,19
Record.keyFieldValue : A
Trailer.fieldNames:TransactionSetID,DetailRecordCount,TransactionCount
Trailer.fieldFixedLengths: 3,9,9
Trailer.keyFieldValue : T
ignoreRecordsetName: truePR,
Can you check the error in sender communication channel?
Go to RWB ---> Component Monitoring ---> Adapter Engine ---> Communication cahnnel monitoring --> it displays new page. Then give your file sender communication cahnnel name. There you will definitely see some error.
The error what you are getting is a different to this one. Can you please check the error what I have given above path.
Regards,
---Satish -
Sender adapter: File content conversion suggestion
Hi all,
I require your suggestion on File content conversion with Sender File adapter. I am having a scenario where I would be getting multiple orders data i.e., header and item information in a single file. Suppose, we have given a chance to design the source structure. So, which would be the better way for having the source structure so that it would be easy for file content conversion and mapping. Is it like Method 1 or Method II?
Method I:
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Method II:
Orderno,FieldA,FieldB,FieldC
Orderno,FieldA,FieldB,FieldC
Orderno,FieldA,FieldB,FieldC
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
If you suggest method I, can you let me know how the content conversion parameters look like?
Thanks in Advance,
Adithya K
Message was edited by:
Adithya KAdithya,
Looking at your input file I think a structure as below would be better.
<Order_Data>
<Orderno>
<Orderno/>
<FieldA/>
<FieldB/>
<FieldC/>
</Orderno>
<Items>
<Orderno/>
<OrderItem/>
<Field1/>
<Field2/>
<Field3/>
<Field4/>
<Field5/>
</Items>
</Order_Data>
Content Conversion Parameters for this would be:
RecordSet Structure OrderData,,Orderno,1,items,
OrderData.fieldNames Orderno,items
OrderData.fieldSeparator 'nl'
OrderData.endSeparator 'nl'
Orderno.fieldNames Orderno,FieldA,FieldB,FieldC
Orderno.fieldSeparator ,
Orderno.endSeparator 'nl'
items.fieldNames Orderno,OrderItem,Field1,Field2,Field3,Field4,Field5
items.fieldSeparator ,
Items.endSeparator 'nl'
ignoreRecordsetName true
Depending on which are your key fields you will have to put two more parameters:
Orderno.keyFieldValue
items.keyFieldValue
Hope this would be of some help.
Thanx,
Manju. -
File Content Conversion - Key Field Value
Hi Experts,
I am using File to Idoc scenario for my mapping. In the receiver Communication channel, I am using File Content Conversion. My scenario is as follows :
I have a recordset with Header and Line items with Key Field Indicator as 'H' and 'L'. In some cases, the value for this Key Field is coming in as something other than 'H' and 'L'. I need to throw an exception when this Key Field is not 'H' or 'L'.
In the 'Content Conversion' tab, my attributes are as:
Header_Structure.keyFieldValue = 'H' and Line_Structure.keyFieldValue = 'L'. Is there any more attributes that I need to add ?
Please advise. Thanks a lot.
Regards,
Freddy.>>multiple key field values in FCC configuration i.e Line_Structure.keyFieldValue = H or L
AFAIK it is not possible but lets wait for other experts to comment on this...
>>Can keyFieldInStructure (add, ignore) parameter help me in this case ?
No. this parameter is only used when you want to include key filed in ur XML structure(add) or not (ignore)...
Chk this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm -
File content conversion for file with hierarchical structure
Hi
I want to read a flat file in the following message structure using file content conversion.
Message structure is :
01 ( occurence = 1)
_ 1B (occurence = unbounded)
_ 1G (occurence = unbounded)
_1H (occurence = 1)
_1N ( occurence = unbounded)
99 (occurence = 1, trailer record)
In short there will be one 01 ( header record) in file. There will multiple 1B records. Under one 1B record there will multiple 1G records. Under each 1G record there will be one 1H recoprd and multiple 1N record. At the end there will one 99 record.
File format : Fixed length
Data in the text file would be as follows :
01Test
1BF0001MS005 4855390859
1GF000172075F31501 GBPINV 040806
1HF000172075F
1NF000172075F0011MS0051125002FOOUKSTFOOD
1NF000172075F0021MS0056540003ICOMSIEARCA
1BF0111TT005 3454390859
1GF011172075F31501 INRINV 040806
1HF011172075F
1NF011172075F0011MS0051125002FOOUKSTFOOD
1NF011172075F0021MS0056540003ICOMSIEARCA
99002187004855390859
Is it possible to do above using file content conversion or is there any method to do it. Please suggest.
Thanks
Varunyou cant acheive this heirarchy using the file adapters cont. conv, cos it supports only to a single level.
Maybe you can have a module or use the conversion agent !!
Some good reads on the Conv. agent!!!
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/18/conversion-agent-a-free-lunch
/people/alexander.bundschuh/blog/2006/03/14/integrate-sap-conversion-agent-by-itemfield-with-sap-xi
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
Maybe you are looking for
-
TS1369 ipod not recognised on pc or in itunes tells me to format disc k then windows wont do it
when i plug ipod in it is not recognised in either itunes or pc
-
Can't see icloud drive folder in Windows 7
Hi all, I'm running Windows 7 and icloud 4.0. I'm familiar with apple products, and have followed all requirements to enable icloud drive on my ipad and iphone. However I am unable to find the icloud drive icon/folder in Windows explorer on my PC. Wh
-
Hi All, I am using SOA 11g(11.1.1.3). I am trying to insert data in to a table coming from a file. I have encountered the fallowing error. Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding ex
-
Please tell me that I can sort my contacts by "Company,Last Name"
I just purchased a Treo 650 I depend on being able to sort my Contacts by "Company, Last Name" where is this preference feature on the Treo 650 in Contacts. If this is not possible the Treo becomes useless to me. Please tell me I am missing something
-
Can I keep backups when migrating to a new Mac?
I have an existing Mac with several years of backups in Time Machine. I've bought a new Mac. I'm going to use Setup Assistant to migrate everything from the old Mac to the new Mac (directly, not through Time Machine), and will retire the old Mac. Wil