File editing RDS(?) error

I am having a rather unusual problem while editing CF files
in Dreamweaver CS3. On a number of files, when I try to edit,
Dreamweaver crashes and gives me a generic error message. There's
no real rhyme or reason and it appears to getting worse. At first,
I could edit a file and save it. Then when I try to make other
changes it crashes immediately. In other cases, DW crashes as soon
as I click the mouse on the line I want to edit.
I am not the only user at my company experiencing this. A
remote user is also experiencing the same issue. We use RDS for the
connection. This problem has just started in the last couple of
days. We have rebooted the server, in the hopes that maybe it was
an RDS connection issue, but the problem persists.
Any ideas on what's going on?
Thanks,
Chris

Never mind. It turns out it's Daylight Savings Time bug
that's affecting our systems. Everything's workingnow.

Similar Messages

Cannot edit MP4 files, maybe compression error?

Hi, I'm new to Final Cut Express. I just bought it to replace iMovie. But I'm having a issue - only had it open for not even a hour and I started getting a "General Error", specifically "Out of Memory". It was a mp4 clip, like this:
MPEG-4 MOVIE
1280x720
H.264, MPEG 4 HIGH EFFICIENCY AAC
2 (Audio Channels)
3,127 (Bit rate)
45.5 MB
I browsed the forums for a bit, trying to figure out what I could do to make the errors go away. I've never had problems with compression or anything like this before. I saw somewhere that I should use MPEG Streamclip to convert the clip to .mov using Apple Intermediate, but MPEG couldn't edit the file either, although it played it fine. I tried going in and trying to export to .mov via Quicktime, but it only exported a completely white video with normal audio. I have no idea what to do now.
Why is this happening, how do I fix or prevent it from happening??
Message was edited by: BreatheHorror

I think you missed me a little here... from MPEG Streamclip, I took the original dimensions and tried to convert it to quicktime with the following settings:
APPLE INTERMEDIATE CODEC
QUALITY 100%
UNCOMPRESSED SOUND
1280x720 UNSCALED
FRAMERATE 29.97
When I try to convert like this, using any of the clips (the clip I had originally talked about was one out of a batch of twenty, I tested them all last night after posting a realized they all get the same error) I get a empty, 0kb file and a Error that says it can't prepare the movie.
FCE won't even open the video at all. I can import it, but when I try to open it with the viewer it doesn't open, it simply spits out a general memory error. It's my Quicktime that does the white screen every time I try and convert the movie through it.
I will however, try to change the setup of my FCE Sequence... when trying to use this clips I was using HDV-APPLE INTERMEDIATE CODEC 1080i50. I was using it because I need the 1080p (this is for Youtube) and it was the only easy setup that was the size I needed. I'm a noob, I don't have any idea on how to change the size of the video (just any easy setup gives me the old square video, so if I try to change it when rendering the clips would be all placed weird with possible gaps).

V8.2.1: generic file i/o error while loading VI's

Hello,
I had a large LV application open and running fine. I closed it, and upon re-opening the top-level VI it gives "Generic File I/O Error" on several sub-VI's (belonging to me, not LV). Opening those sub VI's individually reveals no problem at all, and in any case the whole code base lives in a Subversion repository and I have tried checking out a fresh copy of the whole source code tree and the problem re-appeared. Before Labview displays the "File I/O error" it will hang for several minutes with no disk or CPU activity.
I just tried checking out a fresh copy of the source tree on a separate computer. Now Labview is hanging while loading "<vilib>:\DAQmx\create\channels.llb\DAQmx Create Channel (CI-GPS Timestamp).vi" after having managed to load 920 VI's. On edit: I spoke too soon. It is now duplicating the "Generic File I/O Error" on one of my sub VI's.
If anyone has any clue to this strange behavior please let me know.
Thank you,
-Brian
Message Edited by brian_g on 04-08-2008 11:43 AM
Message Edited by brian_g on 04-08-2008 11:44 AM

What I found was this...
My code calls a bunch of subVI's in another directory. Those subVI's in turn had some unwise paths saved in some of them that loaded other subVI's from a network shared drive instead of the local disk directory.
The network shared drive had been taken off line since the computer was delivered to a customer last Friday. When LV tried to load the VI's from the shared drive, it would hang for about 5 minutes, then give the "Generic File I/O Error" with an "Ok" button to continue. I eventually sat and did this for about 13 VI's, taking most of an hour while waiting for the network reads to timeout.
Once my now-broken application loaded I was able to successfully re-direct the missing VI's to the local disk, resolving the problem.
The "Generic File I/O Error" message could not be less useful in this case and I'm rather irritated by the genericity of the message. Something like "Network read failed" would have immediately illustrated the problem and kept me from wasting a whole lot of time deciphering it.

The document could not be saved. A file I/O error has occurred

Hello,
I have scanned PDF files varying in size from < 1,000 pages to > 5,000 pages. I seem to experience this issue on and off on various files regardless of the size. The issue is when I OCR the pdf using Adobe Acrobat X Pro, when it's completed the OCR process and I go to save it errors out with: "The document could not be saved. A file I/O error has occurred"
I have tried:
1. Saving to local hard drive
2. Saving to network drive
3. Renaming file and repeating steps 1&2
4. File/Save as and reducing (but it won't allow me to do so without saving first, lol)
Any thoughts? Thanks so much.
Phil
System specs:
Windows 7 Professional
16 gb RAM
500Gb Hard drive (409gb free)
Adobe Acrobat X Pro
Message was edited by: bldfb024 (system specs included at bottom)

No it is from a disk drive.
Robb Hanke
[signature deleted by host]

404 File Not Found error following 1.0.2.2.1 migration

I am on RDBMS 8.1.7.1.1 on Windows NT 2000 Server.
I attempted to migrate from 9iAS 1.0.2.1 Portal 3.0.8 to 9iAS
1.0.2.2.1 Portal 3.0.8.
There were not any errors in the migration logs.
When I attempt to test the Apache/Jserv the 'Is It Working'
appears. When I attempt to test the mod_plsql I can get to the
login/password screen and into the gateway administration but
when I click the home link I receive the Http: 404 File Not
Found.
The mod_jserv logs:
[01/12/2001 18:58:08:410] (ERROR) ajp12: Servlet Error:
NoClassDefFoundError: oracle.webdb.page.ParallelServlet
In the portal_home/apache/jserv/servlets/zone.promperties file:
servlet.page.code=oracle.webdb.page.ParallelServlet
Here are my upgrade steps:
From Rdbms 8.1.7 to Rdbms 8.1.7.1.1
From 9iAS 1.0.2.1 to 9iAS 1.0.2.2.1
From Portal 3.0.8 to Portal 3.0.9
1)     Rdbms 8.1.7
2)     Set systemtrig_enable=FALSE in init.ora
3)     Install patchset 1711240 for 8.1.7.1.1
4)     Execute $oracle_home/rdbms/admin/catalog.sql &
catproc.sql scripts
5)     Set systemtrig_enable=TRUE in init.ora
6)     Execute the 9iAS 1.0.2.2.1 installation. An upgrade will
take place.
7)     Stop the Apache HTTP Service
8)     In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jserv/conf/jserv.properties so
that it
Contains one occurrence of the following lines:
# Oracle Portal
wrapper.classpath=E:\portal30\portal30\bibeans\jewt-opt-4_1_2.zip
wrapper.classpath=E:\portal30\portal30\bibeans\share-opt-
1_1_7.zip
wrapper.classpath=E:\portal30\portal30\bibeans\utility.jar
wrapper.classpath=E:\portal30\portal30\bibeans\utilitygui.jar
wrapper.classpath=E:\portal30\portal30\bibeans\utilitypersist.jar
wrapper.classpath=E:\portal30\portal30\bibeans\utilityxml.jar
wrapper.classpath=E:\portal30\portal30\bibeans\swingall.jar
wrapper.classpath=E:\portal30\portal30\bibeans\graph.jar
wrapper.classpath=E:\portal30\portal30\bibeans\graphgui.jar
wrapper.classpath=E:\portal30\portal30\bibeans\LW_PfjBean.jar
wrapper.classpath=E:\portal30\portal30\bibeans\bivisbeans.jar
wrapper.classpath=E:\portal30\lib\http_client.jar
wrapper.classpath=E:\portal30\jlib\javax-ssl-1_2.jar
wrapper.classpath=E:\portal30\jlib\jssl-1_2.jar
wrapper.env=WV_GATEWAY_CFG=E:\portal30
\Apache\modplsql\cfg\wdbsvr.app
9)     In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jserv/conf/jserv.properties so
that it
Contains one occurrence of the following lines:
# Oracle BC4J
wrapper.classpath=E:\portal30\Apache\BC4J\lib\ordim817.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\ordhttp.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jndi.jar
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jbomt.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\javax_ejb.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jdev-rt.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jbohtml.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jboremote.zip
wrapper.classpath=E:\portal30
\Apache\BC4J\lib\connectionmanager.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jbodomorcl.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jboimdomains.zip
wrapper.classpath=E:\portal30\Apache\BC4J\lib\jboorasql.zip
wrapper.classpath=E:\portal30
\Apache\Apache\htdocs\onlineorders_html
#wrapper.classpath=E:\portal30
\Apache\Apache\htdocs\OnlineOrders_html\OnlineOrders.jar
9) In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jservlets/zone.properties and
Remove the following line:
repositories=E:\portal30\Apache\Jserv\servlets\Parallel.jar
10) In referencing the 9iAS Migration Guide A90222-01
Section 5.2 Common Configuration Files:
Edit the $portal30_home/apache/jservlets/zone.properties and
Remove duplicates of the following line:
servlet.page.code=oracle.webdb.page.ParallelServlet
11)     In referencing the 9iAS 1.0.2.2.1 Release Notes A92199-01
Section 1.5.4.1.4
Edit the $portal30_home/apache/jservlets/zone.properties and
Remove duplicates of the following lines:
repositories=E:\portal30\Apache\Jserv\servlets\Parallel.jar
(this line is actually removed completed per step 9)
repositories=E:\portal30\Apache\Jserv\servlets\ChartServlet.jar
repositories=E:\portal30\Apache\Jserv\servlets\AppLoader.jar
servlet.chart.code=oracle.webdb.chart.ChartServlet
servlet.apploader.code=oracle.webdb.apploader.AppLoaderServlet
servlet.ojsp.code=oracle.jsp.JspServlet
servlet.ojsp.initArgs=alias_translation=false
12)     In referencing the 9iAS 1.0.2.2.1 Release Notes A92199-01
Section 1.5.1.36
Edit the $portal30_home/apache/jserv/conf/jserv.config
Insert:
# PTG 1.1.1 Begin
ApJservGroupMount /ptg balance://group1/root
# PTG 1.1.1 End
13)     In referencing the 9iAS 1.0.2.2.1 Release Notes A92199-01
Section 1.5.2.9
Edit the $portal30_home/apache/apache/conf/httpd.config
Add the following directive:
Alias /soapdocs/ “c:/portal30/soap/”
14) Start the Apache HTTP service

In the web.xml you mapped the HelloServlet to the
/sampleapp url so you should call the servlet with the
url:
http://localhost:8080/<webapp>/sampleapp
The directory structure of sampleapp is as follows,
e:\sampleapp\WEB-INF\classes\
WEB-INF\lib
WEB-INF\sourcefiles
WEB-INF\web.xml
I dont have a webapp folder in my directory at all.
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/sampleapp</url-pattern>
</servlet-mapping>As the below lines would suggest

Generic file I/O error. Cannot save VI "filename.VI"

Hi, I have LV 8.2. I am having problems saving VI's after editing them. I am getting the message:
Generic file I/O error. Cannot save VI "filename.VI"
I can recreate the problem by creating a blank VI, placing a property node on the block diagram, right clicking on property and choosing, select property and in the window that pops up expanding Application and clicking on Directory path and clicking OK. I save this VI to disk. Then I load the file again and delete the property node. Now if I try to save that I get: Generic file I/O error. Cannot save VI "filename.VI"
Furthermore with the real VI that I am having problems with. If, when I get the cannot save message, I do a "Save as" and save a copy as "filename backup" and then quit labview without saving the "filename" vi, when I run LabVIEW again I get:
The last time you ran LabVIEW, an internal rror or crash occured at save.cpp, line 821.
I click investigate internal error message now and get told there is a logfile of the error. The contents of the file on one occasion were, quote:
#Date: Thu, 9 Nov 2006 10:56:40 a.m.
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 8.2
#AppKind: FDS
#AppModDate: 07/27/2006 00:08 GMT
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 43 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x008CCBB6 - LabVIEW <unknown> + 0
0x008D17CE - LabVIEW <unknown> + 0
0x0100F864 - LabVIEW <unknown> + 0
0x00528E26 - LabVIEW <unknown> + 0
0x00529342 - LabVIEW <unknown> + 0
0x0052960C - LabVIEW <unknown> + 0
0x004D6D2F - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004D7CD8 - LabVIEW <unknown> + 0
0x004DBA95 - LabVIEW <unknown> + 0
0x004DBD50 - LabVIEW <unknown> + 0
0x0051FD4C - LabVIEW <unknown> + 0
0x0051FD6F - LabVIEW <unknown> + 0
0x0122CA73 - LabVIEW <unknown> + 0
0x77E735DD - kernel32 <unknown> + 0
.\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics 9 nov BU1.vi" (0x05332ed0)] ident: [LinkIdentity "Instance 45 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
$Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
0x00D0FE4B - LabVIEW <unknown> + 0
0x008C8E17 - LabVIEW <unknown> + 0
0x008D1726 - LabVIEW <unknown> + 0
0x008D212C - LabVIEW <unknown> + 0
0x00C41E5E - LabVIEW <unknown> + 0
0x00C46F31 - LabVIEW <unknown> + 0
0x00C4796D - LabVIEW <unknown> + 0
0x00C497C6 - LabVIEW <unknown> + 0
0x004CCB39 - LabVIEW <unknown> + 0
0x004D7C95 - LabVIEW <unknown> + 0
0x004DF19A - LabVIEW <unknown> + 0
0x77D48654 - USER32 <unknown> + 0
0x77D48723 - USER32 <unknown> + 0
0x77D48999 - USER32 <unknown> + 0
0x77D48FD2 - USER32 <unknown> + 0
End of Quote:
Any ideas?

Hello,
Sorry you've encountered this problem. The cpp error is a known issue, which is filed under corrective action request number : 42BI4OO5. In a nutshell, this means R&D is looking into the problem. I attempted to reproduce the problem as you described below, but I did not get the "Generic file I/O error" as you did.
If you have any further insight or detail which perhaps is the key to reproducing this, please repost, and I'll try to reproduce this again! In the mean time, does it help to copy and paste your code to a new VI, or does that VI suffer the same problem?
Thank you,
Best Regards,
JLS
PS -
Standard CAR Response:
"This was reported to R&D (42BI4OO5 CAR ID) for further investigation. Thanks for the feedback!"
Best,
JLS
Sixclear

The file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

the file is not compatible with this version of photoshop / CS2 error -- Same File : CS6 no error / CS2 error , I need trouble shooting method, Please

Save with Maximize Compatibility in CS6.
Choose Edit > Preferences > File Handling (Windows) or Photoshop > Preferences > File Handling (Mac OS).
From the Maximize PSD and PSB File Compatibility menu, choose any of the following:
Always
Then re-save your file so it can open in CS2

OIF - can I edit specific error messages back to user?

I've had a request from end-user support to change a specfic error message generated by OC4J /shareid app.
At present if a user tries to access a session that's been invalidated (logout, session timeout, etc.) they are presented with an error:
Identity Federation Error
The signon or signoff to the partner domain could not be completed. Contact your administrator. (Error ID TSE016)
I'd like to change that to something more actionable like "Please close your browser and try to access resource again."
Is anyone aware of how to edit these error messages?

Alright. If you can share the mod_rewrite approach you are planning, that would be great.
In any case, you got me curious enough to poke around for the message catalog in question. The message is from shareid-user-messages*.properties inside $ORACLE_HOME/jlib/idmbridge.jar.
To update these, you'll just need to update the jar file -
cd $ORACLE_HOME/jlib
jar -xvf idmbridge.jar shareid-user-messages_en.properties shareid-user-messages.properties
Change both files to edit the message with ID ERP001 (it's the first one in the catalog) as you need, save the files, and then..
jar -uvf idmbridge.jar shareid-user-messages_en.properties shareid-user-messages.properties
Restart OIF and you should be done. In case you have users with browser languages other than English, you can update the other catalogs (shareid-user-messages_fr.properties, shareid-user-messages_de.properties etc.) as well.
I can see why Oracle would rather have customers not do this, but I'm not sure why the user-facing messages are jarred up in the first place.
Hope this helps.
-Vinod

When I call VI on Linux from Teststand on Windows using TCP/IP I get "file not found error".any sugeestions?

I am trying to execute a VI running on Linux from Teststand running on windows 2000 prof ,both running on two different machines.I used TCP/IP for the interface using the following steps on Labview VI:tools>options>VIserver>TCP/IP and gave the ip address of both the machines.When I gave the file path as c:\home\test.vi in Edit labview Vi call window(the Vi in linux is stored in /home/test.vi)and also in remote vi path:/home/test.vi,I get a file not found error.The teststand version is 3.0 and labview is 7.0.Any idea why this is happening and any solutions?

priya guru,
Here is a knowledge base that addresses your question: �How do I call test VIs that reside on a non-Windows platform from TestStand?�
You also need to set TCP/IP Access found in Tools->Options->'VI Server: TCP/IP Access'. Make sure that you list the IP address in the Access List to allow TCP/IP access to that machine. Finally you need to specify which VIs are accessible to remote applications. Open up Tools->Options->'VI Server: Exported VIs' and provide paths to the VIs you wish to be remotely accessible.
I have attached an example VI that demonstrates VI Server in action. Please post back if you are still having problems. Good luck!
Cr
aig H.
National Instruments
Attachments:
Remote_Run_--_VI_Server.zip ‏88 KB

File Edit View Missing

I know this is a very beginner question but where is File - Edit - View etc, the window menus?

I would try #12 and #4 from this KB article to re-create the configuration folders.
https://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
However, if that doesn't work, I think you may need to re-install.

Help with "The end of file was reached" error message in Outlook 2011

Hello, I am having an issue with Outlook 2011 that after 24 hours or so I am getting a “The end of file was reached” error message code -17895.
Right after this error I get a disconnected from Exchange server and even after re opening the client it stays like this for about 5 minutes then restores. Has anyone else seen this error? I am able to reproduce this on multiple machines with multiple Exchange
2010 mailbox accounts.

Same situation here:
Outlook 2011 for Mac using Office 365, 3 users have reported the End of File Reached error when trying to send email.
I have logged a ticket with Microsoft support and they have followed up with the following directions.
1.
Repair Disc Permissions On A Mac
o
1
Log in to your computer with the administrative account. Open the hard drive, go into the "Applications" folder and then open the "Utilities" folder. Now launch the Disc Utility application.
o
2
Select your main hard drive. You'll probably see two options--one is the manufacturer's name of the disc and the other name is what you've called it. Choose the name of your hard drive.
o
3
Click on "Verify Disc Permissions" and the computer will perform a diagnostic test. After a few minutes, the problems with disk permissions will be reported in the Disc Utility window.
Click on "Repair Disc Permissions" to fix them.
o
4
Insert your Mac OS X installation disk and restart your computer. Hold down the "C" key on your keyboard to boot from the disk rather than your computer's hard drive. Cancel the OS
installation and open Disc Utility.
o
5
Click on "Verify" to have Disc Utility check your computer's hardware. Notice that this option is only available when the program is run from the CD. You can only test the hardware
of a computer that isn't running the program locally.
o
6
Use Disc Utility to try and repair any hardware errors that it detects. Usually fixing the permissions will be enough to maintain your computer. If you still experience frequent lockups
and crashes, then you should try repairing it with this method.
Tips & Warnings
If you use your computer for high-performance work, such as software compiling or video editing, then you may want to check the permissions weekly. Most computer users will only need
to fix permissions after noticing problems with applications or the operating system.
If the computer's performance does not improve after repairing permissions, then you'll have to troubleshoot for other issues. You may want to purchase more RAM for your computer to
help speed it up.
Permissions repairs will not correct problems caused by applications that did not use Apple's installer. Try deleting all files associated with the application and then reinstalling
it.
Avoid repairing the permissions after you've booted the computer from the OS X CD. It won't cause problems to your drive, but the version of "Disc Utility" on the CD may not be updated
to address permission changes that are required by certain software updates.
Secondly, the information for repairing an Outlook 2011 database is as follows:
http://support.microsoft.com/kb/2360509

Is it possible to use JSF file as as error page.

I am using jsf file as an error page.It is working in fine in websphere. But if i am using that only the exception is raised it is not going to error page.
In Web.XML file,
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<error-page>
<error-code>403</error-code> <location>/faces/unauthorized.jsp</location>
</error-page>
jsf codings are placed under *.jsp files. In the time submitting form data to server a method throws NumberFormatException. This exception information is displayed in console. but blankpage is coming . It is not redirected to error.jsp fle which is under faces/error.jsp.
If i am directly giving /error.jsp then it is giving Faces context is not created error.
So i tried use simple jsp(pure jsp) file wihtin the folder and i set path like /pages/foo.jsp. It is working.
Tell me is it possible to use jsf as error page.

What would you hope to do with the reference? The Mathscript node doesn't have a file reading capability. You need to read the file and pass the data into the Mathscript node.
EDIT: I stand corrected. You need to use the fopen and fclose functions inside of the MathScript node to be able to read a file inside of it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I keep getting the "No such file or directory" error when files really

I keep getting the "No such file or directory" error when files really
i did some research online and found nothing yet, can anyone help, this has been happening with new files for like a week. thanks

additional information needed.
solely stating "i hav problemz plz halp" never leads to a solution
read this:
http://www.catb.org/~esr/faqs/smart-questions.html
Last edited by robmaloy (2009-04-21 07:16:16)

[SOLVED] Generated grub file contains syntax error

I haven't touched any of /etc/default/grub and /etc/grub.d/*
Here's generated file containing syntax errors:
http://pastebin.kde.org/p39g742cg/kn73gf
Last edited by dlh (2013-12-09 18:59:57)

Well the errors show up when:
grub-mkconfig -o /boot/grub/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-ck
Found initrd image: /boot/initramfs-linux-ck.img
Found Windows 8 (loader) on /dev/sda1
error: out of memory.
error: syntax error.
error: Incorrect command.
error: syntax error.
Syntax error at line 159
Syntax errors are detected in generated GRUB config file.
Ensure that there are no errors in /etc/default/grub
and /etc/grub.d/* files or please file a bug report with
/boot/grub/grub.cfg.new file attached.done

EXPDP generates new dmp file and reports "file already exists" error

Hello everyone,
Hope you all had a wonderful holiday. I got some problems with datapump expdp 10.2.0.4. It would be appreciated if you could provide some advice. Thanks in advance.
I newly created a 10.2.0.4 database. The database can startup and be connected via Toad without problem. I can also use impdp to import some data to the new database. But when I'm trying to use expdp to export a schema from the database, I got the following errors:
expdp parfile=expdp_scott_mfp1.parExport: Release 10.2.0.4.0 - 64bit Production on Monday, 26 December, 2011 22:10:49
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, Data Mining and Real Application Testing options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/u02/exports/mfp1/expdp_scott_mfp1_12262011.dmp"
ORA-27038: created file already exists
Additional information: 1
Every time I run the expdp, it just creates the dmp file (expdp_scott_mfp1_12262011.dmp) specified in the parfile under the EXPORT directory and reports "file already exists " error.
Your advice is highly appreciated.
Thanks.
Edited by: 904668 on Dec 27, 2011 8:47 AM

i thought I found the problem. Used same file name on dump file and log file. How stupid of me. Sorry for bothering. Thanks and happy new year!

File editing RDS(?) error

Similar Messages

Maybe you are looking for