File formatting using File adapter
Hi we are using a sender / receiver file adapter to recive file from source and post file to the target location
This is the expected format in the target system
<?xml version="1.0" encoding="utf-8"?>
<YYY_TIME_XML>
<YYY_TIME_DATA>
<CLIENTID>1</CLIENTID><EMPLID>7454</EMPLID><EMPL_RCD>1</EMPL_RCD><SEQNO>2</SEQNO><COMPANY>765</COMPANY><BUSINESS_UNIT/><DEPTID/><LOCATION/><JOBCODE/><PAYGROUP>XI1</PAYGROUP><OFF_CYCLE>Y</OFF_CYCLE><PU_TXN_TYPE>R</PU_TXN_TYPE><MANUAL_CHECK>S</MANUAL_CHECK><ERNCD>KEG</ERNCD><DATEWORKED>19970303</DATEWORKED><EARNS_BEGIN_DT>20050624</EARNS_BEGIN_DT><EARNS_END_DT>20040630</EARNS_END_DT><OTH_HRS>5</OTH_HRS><ADDL_PAY_SHIFT/><ADDL_SEQ>0</ADDL_SEQ><COMPRATE>10</COMPRATE><DISABLE_DIR_DEP>R</DISABLE_DIR_DEP><AMT>80</AMT><CREATION_DT>20070401101234</CREATION_DT><BATCH_ID>200777251</BATCH_ID><STATE> </STATE><LOCALITY> </LOCALITY><GB_GROUP_ID> </GB_GROUP_ID>
</YYY_TIME_DATA>
<YYY_TIME_DATA>
<CLIENTID>1</CLIENTID><EMPLID>127454</EMPLID><EMPL_RCD>3</EMPL_RCD><SEQNO>5</SEQNO><COMPANY>149</COMPANY><BUSINESS_UNIT/><DEPTID/><LOCATION/><JOBCODE/><PAYGROUP>SW1</PAYGROUP><OFF_CYCLE>T</OFF_CYCLE><PU_TXN_TYPE>Q</PU_TXN_TYPE><MANUAL_CHECK>S</MANUAL_CHECK><ERNCD>BEG</ERNCD><DATEWORKED>20050707</DATEWORKED><EARNS_BEGIN_DT>20050624</EARNS_BEGIN_DT><EARNS_END_DT>20040630</EARNS_END_DT><OTH_HRS>52</OTH_HRS><ADDL_PAY_SHIFT/><ADDL_SEQ>0</ADDL_SEQ><COMPRATE>8</COMPRATE><DISABLE_DIR_DEP>Q</DISABLE_DIR_DEP><AMT>90</AMT><CREATION_DT>20070401106784</CREATION_DT><BATCH_ID>200788851</BATCH_ID><STATE> </STATE><LOCALITY> </LOCALITY><GB_GROUP_ID> </GB_GROUP_ID>
</YYY_TIME_DATA>
But we are getting the data in a line string format.
<YYY_TIME_XML><YYY_TIME_DATA><CLIENTID>1</CLIENTID>......................
Any ideas on how to fix this.
Thanks,
Hi Nandini !
As far as I understand, the "CRLF" characters (Hexa 0D and 0A for carriage return and line need) are not needed for the XML parser to understand the target file structure as a unique line...maybe your target system is parsing manually the file reading it line by line instead of using an XML parser.
If you try to open your received xml file in Internet Explorer? are you seeing it correct?
An XML file with all info in one line is still a valid XML file.
Regards,
Matias.
Similar Messages
-
How to read MS-Excel file by using file Adapter
hi friends,
I have an issue on read Operation by using file Adapter.
It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
So friends, please help me how to solve this problem?
Thanks in Advance..See also this post:
Read Excel File Using FileAdapter in SOA 11g
It might help you -
Help needed while exporting crystal reports to HTML file format using java
Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanksthe ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM -
Plz tell me which sound file format uses minimum memory of a director file
plz tell me which sound file format uses minimum memory of a director file. bcoz on adding sound the projector file becomes a large memory file .
so i am confused that which file format should be used.saramultimedia,
Are you certain that you're asking your question in the right place? This forum is about the Adobe Media Encoder application. Most of the people who answer questions here are familiar with the digital video and audio applications such as After Effects and Premiere Pro.
If you have a question about Director, it's probably best to ask on the Director forum. But I see that you already know that, since you already have a thread on that forum to ask this question, and it got an answer:
http://forums.adobe.com/thread/769569 -
Record Audio in mp3 file format using FMS
I am Recording Audio Using FMS which will record Audio file in FLV File Format default But I like to Record in MP3 File Format. Is it Possible.
And I also Record Video In MP4 File Format using h264 encode. Which Give me Video File in MP4 File Format but When i will try to play that MP4 File it Didn't play. So, I post-processed video with a tool called F4V Post Processor. Now That MP4 Video File Play But Didn't Give me Sound in that Video.
My Code is:
var h264Settings:H264VideoStreamSettings = new H264VideoStreamSettings();
h264Settings.setProfileLevel(H264Profile.MAIN, H264Level.LEVEL_3);
ns.videoStreamSettings = h264Settings;
ns.publish("mp4:"+FILENAME+".mp4","record");
I search Lot but didn't get the solution. So, Please Give me Solution for Both thing.The .flv format is a "container" format, not a video format.
So that means that inside the container, you can have a video file and/or an audio file or even just an audio file.. which most likely is already an mp3 file. Use something like "FLV Extract" to break open the container and see:
http://moitah.net/
But really, for any Web delivery of audio, the .flv (audio only) method works just fine. Lots of media players available for the Flash .flv file.
For example:
Sounds from my bunk on the Lady Washington
http://exploreolympics.com/reports/?p=2857
Scroll down to third media player.
A little quiet to start with... but this is a .flv file with just an mp3 audio file inside.
Best of luck!
Adninjastrator -
Same file name using JMS adapter on sender side.
Hi Friends,
I got a requirement to capture file name using JMS adapter on the sender side.
Can some one help me in resolving this issue.
Regards,
Jeevan.Hi ,
You can use Dynamic Configuration in mapping.
Create a UDF with input as file name and copy/paste this code
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//conf.removeAll();
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String filename= conf.get(key);
conf.put(key, fileName);
key= null;
return fileName;
Thanks. -
Record audio file in a wav file format using QuickTime 7 Pro for Windows?
Is it possible to record audio file in a wav file format using QuickTime 7 Pro for Windows? The system I want to upload audio files that I record to requires they be in a wav file format / PCM - 112025kh / 8 bit mono / 11.05khz
Something tells me no...and I bought this upgrade for nothing...GRRRRRRRQuickTime Pro for Windows allows you to make audio recordings from some input devices.
You can then "export" these new files to .wav format at any setting you choose. -
Hi,
I have a excel file that I have been using since beginning of year.
Yesterday, I tried to open it but a message comes out "
Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
After I click yes, the page is blank. The file is about 400kb in size.
I have try open and repair and third party repair program and not working also.
I would appreciate a lot if you can help me.
Thank you very much.Per your post, this problem might be caused by malware on the affected machine.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
If this is not the case, feel free to post back and let me know. Thanks.
Tony Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Upload file without using file upload UI Element
Hi all.
I need upload a .txt file without using file upload UI Element because filename is not insert by user. The filename is generated by program. I try to use 'GUI_UPLOAD' and 'WS_UPLOAD' but don't work.
Many thanks in advance.As you correctly pointed out we cannot use the gui_upload and gui_download fm's in webdynpro because they require sap gui and WD Components generally run in a HTML or Portal environment.
The only option available is File Upload Element -
Hoe to logical file name using "FILE" transcation
I want to create a logical file name using "FILE" transaction , i have file path '/xfer/OUT/IDD0230 ' that cureently hard coded in program but i want to avoid hard code .
You need to go to FILE transction, create new entry.
You need to specify Physical name i.e value hardcoded in your program
and corresponding new Logical Path which enduser will be entering.
In code u ned to decode Logical path to physical path as its actual path.
Award points if helpful.
Shital -
Flat File to Flat File Scenario using File Adapter
Hi Experts,
In my scenario, requirement is Flat File to Flat file through File Adapter in PI. At sender end, we would need to use Sender File Adapter (NFS) and receiver end we would need to use Receiver File Adapter (FTP). File would be coming as a encrypted format, and the file needs to be sent in encrypted format.
Any idea how to proceed with this requirement would be helpful.
Thanks and Regards
SoumyaHi Soumya,
You need to choose the FTP in the "transport protocol" option. Then in the FTP connection parameters choose the option Connection Security and assign the value "FTPS for control and Data Connection". Then the "Command Order" will show up below that option and you could leave the default value itself. If you are using Public private key certificates of X.509 then you could choose the option "Use x.509 certificate for client authentication" and assign the values to the "keystore" and "certificate & private key" fields.
Note: To use the FTP with SSL you need to add the CA certificate to the TrustedCAs keystore view.
Regards,
Vishnu. -
Duplicate File issue using FTP adapter - BizTalk 2010
Hi We encountered an Issue of picking Duplicate files in BizTalk 2010 from the FTP Location. Need your assistance on this.
Mainframe sends multiple files a 0 KB file to FTP and BizTalk picks during a particular service window using FTP Adapter.
Receive Location has a pipeline component which decodes the MF file(EBCDICRow format).
Send Port transmits the file which is decoded in the Receive location. There is no mapping or orchestration involved.
When 2 files are placed in FTP Location. BizTalk Transmits the files successfully
No suspended messages in BizTalk but we see below error in event log. we tried reproduce the issue but no luck.
Host Instance running FTP Location is Clustered
There was a failure executing the receive pipeline: "XXXX.XX.Pipelines.Receive_XXX_TransactionsMC_passthru, XXX.XX.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c2d1f476d5c2f97d"
Source: "EbcdicRowDeCode" Receive Port: "XXX.XX.MCSTransactionsMC" URI: "ftp://XXXXXXXX:21/'XXXX'/MCSDT.DEFKOP.R001.D*.T*" Reason: Unable to cast object of type 'Microsoft.BizTalk.Streaming.BasicStreamWrapper' to type 'XXX.BizTalk.Pipeline.Components.Streams.V3.VirtualStream
MF Puts below Files at FTP Location
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
BizTalk Picks ( at specified Service window) and Transmits as
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T009000
PSNOX.MCSDT.DEFKOP.R001.D150406.T002100
Regards
-SriHi Sri,
There could be two reason for such a behavior:
1) Using Non-Clustered Hosts: It is always recommended to use the clustered host for FTP adapter. Because FTP don't allow
any locking mechanism on the files so in case of non-clustered with multiple host instances you might receive same file multiple times through different host instances.
2) If the original document is still being written to the FTP server by the host application, the FTP adapter cannot
delete the document and will retrieve another copy of the document at the next polling interval that is configured for the receive location. This behavior causes document duplication to occur.
Workaround could be:
Configure the host application to write to a temporary folder on the same hard disk as the public FTP folder and to periodically move the contents of the temporary folder
to the FTP folder. The temporary folder should be on the same hard disk as the public FTP folder to make sure that the move operation is atomic. An atomic operation is an operation that is functionally indivisible. If you write data to the public FTP folder
by using the BizTalk Server FTP adapter, you can do this by specifying a Temporary Folder property in the FTP Transport Properties dialog box when you configure a send port. If you specify a Temporary Folder property, make sure that this folder is on the same
physical disk as the public FTP folder.
Configure the FTP receive location to operate within a service window when the host application is not writing data to the FTP server. You can specify the service window
when you configure the receive location properties.
Refer: Known Issues with the FTP
Adapter
Rachit
Please mark as answer or vote as helpful if my reply does -
Two Files merging using File adapter in Bpel 2.0
Hi All,
I have two different files (File 1 and 2) of same format(Two columns each) , now i want to merge these two files using their data and form a consolidated file (File 3 with four columns).
Please advise on how to make it possible using file adapter.
Example:
File 1 Format: A1 and A2 - are two columns of number and sring type
File 2 Format : B1 and B2 - are two columns of number and string type
Consolidated File 3 Format : A1 B1 A2 B2 - forming a single row if A1=B1 and also populating A2 and B2.
Thanks
Karthick.Hi Karthick,
I would say read both files completely. Then create a transform and select both messages as an input creating one output. With XSLT it should not be too hard to combine the two inputs. You could loop on one file and then select each row from the other file. That output can be written to file.
I don't know what triggers the process, but you could either let bpel be triggered by the polling on one file and read the other synchronously. Or read both files synchronously.
Regards,
Martien -
So, I search the binary matlab file format('*.mat').
Title:
Moving Data Between MATLAB® and LabVIEW
Problem:
How can I share data between LabVIEW and the MATLAB environment?
Solution:
MATLAB users can move data between the
MATLAB environment and LabVIEW, you have several options. Prior to
LabVIEW 5.1, the only way to transfer data between these two
environments was to use the Save and Load functions. Those are discussed herein.
Beginning
in LabVIEW 8.0, MathScipt was introduced. MathScript is an integrated
part of LabVIEW that you can use to combine intuitive graphical
dataflow programming with math-oriented textual programming. See the
attached links below for more information on MathScript.
Beginning
in LabVIEW 5.1, the MATLAB script node was introduced into the LabVIEW
programming environment. The MATLAB script node makes ActiveX calls to
the MATLAB software from within LabVIEW. This requires that both MATLAB
be installed on the same machine and that a valid license is obtained.
More information on the MATLAB script node can be found in the attached
KB's.
For all versions of LabVIEW, this data transfer can be
performed by saving the data in a file using the MATLAB software and
reading it directly from LabVIEW, or vice versa. In the MATLAB
environment, the command "save" allows you to save the data in
binary format (*.mat) or ASCII format. You also have an option of
saving it in ASCII format using a tab delimiter between data points and
the command "load" allows you to read in the data.
ASCII Format
Complete the following steps to import or export data between LabVIEW and the MATLAB environment using an ASCII file format.
From the MATLAB environment to LabVIEW
To save a vector or a matrix X in tab-delimited ASCII format, enter the following in the command window or m-script file in the MATLAB environment:
>>SAVE filename X -ascii -double -tabs
This creates a file named filename containing data X in tab-delimited ASCII format.
Import the file into LabVIEW using the Read From Spreadsheet File VI located on the Functions»File I/O palette.
From LabVIEW to the MATLAB environment
To export a matrix X from LabVIEW to the MATLAB environment, first save the data in ASCII format in LabVIEW using the Write To Spreadsheet File VI on the Functions » File I/O palette.
Enter the following in the command window of the MATLAB environment, or in the m-script file:
>> LOAD filename
This reads the data into the MATLAB environment.
Binary Format
Complete the following steps to import or export data between LabVIEW and the MATLAB environment.
From the MATLAB environment to LabVIEW
As mentioned above, LabVIEW does not save multiple variables to one
data with extra manipulation, and will not be discussed here.
Therefore, the only way of sending the data from the MATLAB environment
to LabVIEW without tampering with the MAT binary file structure is
using the ASCII format. Also, please bear in mind that you need to have
one file for one variable.
From LabVIEW to the MATLAB environment
Because
the MATLAB software saves data in its own binary format, the "MAT"
file, binary LabVIEW data must be converted to this format prior to
transferring the data. The attached examples can be used to save
LabVIEW data in the MATLAB software format. The convenience of the .MAT
file format is that more than one variable can be saved in the same
file. The example shows saving seven variables to .MAT format; the
example can be modified for any number of variables.
Once this data is saved from LabVIEW, it can be read into the MATLAB environment, using the following command:
>>LOAD filename
The Who
command can then be used to display all the seven variable names, and
you can display the content of them by entering the variable names at
the command prompt as usual.
MATLAB® is a
registered trademark of The MathWorks, Inc. Other product and company
names listed are trademarks and trade names of their respective
companies.
| Michael K | Project Manager | LabVIEW R&D | National Instruments | -
How to get the incoming file name using JMS adapter and SOAP adapter
Hi Everybody,
In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to SAP IDOC.
my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
EX:
<IDOC
<REF>price<DateTimestamp>.txt</REF>
</IDOC>
Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
Thanks
rajIf they are passing it in message id or correlation id,
you can access it using
<xsl:variable name="dynamic-conf"
select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key"
select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
<xsl:variable name="dynamic-value"
select="dyn:get($dynamic-conf, $dynamic-key)" />
Check this:
http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
Thanks,
Beena.
Maybe you are looking for
-
Key Mapping activates Versus Import Manager
Hello, I have Key mapping activated in the console and Supress Unchaged Records activated in my syndication map. Case : I import files (suppliers catalogs) to MDM via Import Manager manually. I am not sure about it, but since I activated Key mapping
-
I have just bought an Ipad and Apple TV and am wanting to have a Keynote presentation playing through the TV from the Ipad, but be able to open other applications on the Ipad without them also being mirrored and interrupting the presentation. I know
-
Password problems [subject edited by moderator]
Has anyone had trouble getting password changes to take? I've tried to change it 3 times, and it APPEARS to be accepted, but does not let me install software updates.
-
Photoshop CC 64 bit memory usage
I have just built a Windows 7 64 bit PC (Windows 7 Professional) with 16Gb of Ram. However the 64 bit version of Photoshop CC only sees 4gb (or there abouts). This is the same as the 32 bit version.
-
My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?