File server machine

We are running windows sbs 2008 r2 in our network. We would like to bring up another server for file sharing within the network. Can we run windows 7 on a hp proliant dl360 g6 to do the file sharing?

I just wanted to add to this, yes you can use Windows 7 as file server. Something that you MUST do is tell Windows 7 that it will be used for file storage or you will have problems within about a week. Here is what you need to do to the registry:
Navigate to: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
Set that key to "1"
Navigate to: HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
Set that key to "3"
To make things easier, you can copy and paste this text into notepad and save it as a .reg file and run that file.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters]
"Size"=dword:00000003
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
"LargeSystemCache"=dword:00000001

Similar Messages

To upload a file from client machine to server machine

Hi everybody!
Could anyone plz help me. I am struck in a problem
I want to transfer a file from client's machine to server but I am not able to upload
It is tranferring the file only to the local machine
I am using orielley package It is transferring files only to my local machine but not to the server .Can anyone correct it. It's very urgent
how to write the relative path for server
I am using this path and it is not uploading
MultipartRequest multi = new MultipartRequest(request, "../<administrator>:<dev2daask>@dev2:C:/123data/", 5 * 1024 * 1024);
Here is my code:
<%@ page import="java.util.*" %>
<%@ page import="javax.servlet.*" %>
<%@ page import="javax.servlet.http.*" %>
<%@ page import="java.io.*" %>
<%@ page import="com.oreilly.servlet.MultipartRequest"%>
<%
try {
// Blindly take it on faith this is a multipart/form-data request
// Construct a MultipartRequest to help read the information.
// Pass in the request, a directory to saves files to, and the
// maximum POST size we should attempt to handle.
// Here we (rudely) write to the server root and impose 5 Meg limit.
MultipartRequest multi = new MultipartRequest(request, "../<administrator>:<dev2daask>@dev2:C:/123data/", 5 * 1024 * 1024);
out.println("<HTML>");
out.println("<HEAD><TITLE>UploadTest</TITLE></HEAD>");
out.println("<BODY>");
out.println("<H1>UploadTest</H1>");
// Print the parameters we received
out.println("<H3>Params:</H3>");
out.println("<PRE>");
Enumeration params = multi.getParameterNames();
while (params.hasMoreElements()) {
String name = (String)params.nextElement();
String value = multi.getParameter(name);
out.println(name + " = " + value);
out.println("</PRE>");
// Show which files we received
out.println("<H3>Files:</H3>");
out.println("<PRE>");
Enumeration files = multi.getFileNames();
while (files.hasMoreElements()) {
String name = (String)files.nextElement();
String filename = multi.getFilesystemName(name);
String type = multi.getContentType(name);
File f = multi.getFile(name);
out.println("name: " + name);
out.println("filename: " + filename);
out.println("type: " + type);
if (f != null) {
out.println("length: " + f.length());
out.println();
out.println("</PRE>");
catch (Exception e) {
out.println("<PRE>");
out.println("</PRE>");
out.println("</BODY></HTML>");
%>

you have not understood my point
how does this code will run on servlet when I want to upload a file from client's
machine to server machine
what I am doing is I am giving an option to the user that he/she can browse the file and then select any file and finally it's action is post in the jsp form for which I have sent the code
All the computers are connected in LAN
So how to upload a file from client's machine to server's machine
Plz give me a solution

How to upload file from client machine to server machine?

i am developing one web application.I have one html file with browse option. client can browse any type of file. what ever file the client will browse it going to be stored in server machine. for storing the file want to use servlet. my html form is of multipart type.
can any one send me the servlet code? i am using tomcat 5.5 as web server.

[http://commons.apache.org/fileupload]
Start reading 'User Guide' and 'Frequently Asked Questions'.
Good luck :)

How to download a file from server machine to client machine using jsp

Hi,
In my application, I have an excel file stored on my server machine. How can I download that excel file on to my client machine using jsp. Is there any other way I can open that file from my machine and save it in my machine using jsp/java?
Its an emergency for me to do this.
Can anyone provide me the full code to download a file from server machine as I don't have
time to browse through various sites.
thanks in advance,
Tiijnar

Please post your code using code tags (click on CODE above the text area, when posting)
response.setContentType("application/octet-stream");Why octet-stream? Set the correct mime-type.
String disHeader = "Attachment; Filename=\"filename\"";The filename should just be the file's name. Not the complete path to the file! This will tell anyone where the file is located on the server. It's also inconvenient because by default,the browser will suggest it as the name for the download.
Your way of writing to the output stream is just plain wrong. See this snippet (picked from [http://balusc.blogspot.com/2007/07/fileservlet.html])
        BufferedInputStream input = null;
        BufferedOutputStream output = null;
        try {
            // Open streams.
            input = new BufferedInputStream(new FileInputStream(file), DEFAULT_BUFFER_SIZE);
            output = new BufferedOutputStream(response.getOutputStream(), DEFAULT_BUFFER_SIZE);
            // Write file contents to response.
            byte[] buffer = new byte[DEFAULT_BUFFER_SIZE];
            int length;
            while ((length = input.read(buffer)) > 0) {
                output.write(buffer, 0, length);
            // Finalize task.
            output.flush();
        } finally {
            // Gently close streams.
            close(output);
            close(input);
        }

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Using Time Machine to backup a production file server

Does anyone have any recommendations for using Time Machine to back up a production file server? Right now we have an Xserve G5 with two internal 750GB drives in a RAID1 as our main file share to about 25 users, and a large external FW800 Guardian MAXimus drive to hold our backups. Our current backup system is a custom-written version of Mike Rubel's backup system -- http://www.mikerubel.org/computers/rsync_snapshots/ -- incremental backups done with rsync and cp with hardlinks exec'd via crontab, which seems to be very similar to what Time Machine does. Unfortunately, I've been finding it difficult to find any tech specs on Time Machine as far as:
* CPU and IO priority - This is a production file server, so I'd prefer to keep this from sucking power performance from the users. Just how much CPU, and more importantly IO, should I expect it to eat?
* How often it does a backup - The best answer I've found is "always", but I wanted to know if there was a more concrete response for this. Does the system hook into the kernel to see whenever a file gets written out so it doesn't have to continually scan the entire drive?
* Command line restoration - Are there any good utilities for recovering via SSH, or am I going to have to VNC to the server and do the BS magic flying screen just to restore a file?
Message was edited by: Gabetax

For mine I have 3x500GB drives in the server, two are RAID mirror and the third is time machine backup. I just turned on time machine in system preferences and set the backup drive, and after an hour it made the first backup.
Seems to work perfectly although I have heard a couple of rumours that the mail server causes the backup to grow forever, but havnt checked this. Im staging another machine, so perhaps will try this to make sure!
I am expecting the backup will only be useful to a system administrator, and am not sure how a user logged into a shared directory account (i.e 'roaming profile') would access the backup, and somehow suspect they wont be able to just seamlessly use the slick interface as if the backup were their own.
On a 2x2Ghz G5 it didnt seem to use the full load on either the CPU or the disk the first time it was run (copied at about 9MB/sec throughout). The incremental backups are very fast, and are often completed before I realise they have started. I gather it uses Apple's own spotlight API to find changed files, so isnt like an rsync which scans entire volumes. Worth checking the exclusion filters though, no point backing up any large cache/log files you may be storing.
James

Time machine and network file server

Hi,
Is it possible to set up the time machine to a network file server which my macbook is able to see and use? Right now, time machine is limited to be used with a delicated external HD or another Mac...
It would be convenient to share files between my 1st mac and other windows PCs.

armyedwrd wrote:
I believe I can do a work around by simply sharing my External HD so that that can happen. It's just very awkward to navigate to that shared drive each time we access it. If I had separate backup HDs for each MAC, I think I could use the TC as a media server (at least that's what I get from the marketing material here ).
You might want to try one of the workarounds in #Q3 of Using Time Machine with a Time Capsule.
Have you ever used Time Machine Editor? Is it worth downloading and using?
It's not recommended; Time Machine usually works best the way it was designed. See Time Machine - Frequently Asked Question #13.

Time Capsule both: Time machine and file server

Hi!
We have 3 macs that has access to a Time Capsule we use just as a file server.
Now, I'll like to do backups of all the data, and I was thinking about using Time Machine in all the computers to backup in Time Capsule.
My question is, can I use Time Capsule as both? With Time Machine and also as a file server?
Thanks,
Júlia

Time Machine can be used to backup your Macs to the Time Capsule. You set this up on each Mac by opening System Preferences (gear icon) on the dock and then opening Time Machine to select the Time Capsule as the destination for backups.
Time Machine will keep separate files for each Mac on the Time Capsule and your regular files on the TC will be left alone. Ideally, Time Machine needs about twice as much space for each Mac to allow for a good history of future backups.
Backup each Mac one at a time since the first backup will copy everything from the Mac over.
Things will go 3-5 times faster if you connect the Mac to the Time Capsule using an Ethernet cable for this procedure.
Once the "master" backup is completed for each, you can switch back to wireless to backup incremental changes since these will only take a few minutes on average.
As you know, Time Machine cannot be used to backup the regular files that you already have on the Time Capsule disk. If you need to backup these files, post back for a few suggestions on applications that can handle this task.

"file server is running on your machine" message

OK, this seems very weird & I can't figure out if the issue is in my new (simultaneous dual band) Airport Extreme or the Mac (iMac G5) I use to administer it.
When I try to connect to a USB drive connected to the Extreme from my iMac, & the iMac is connected to the Extreme by ethernet, I see the Extreme in the sidebar of Finder, but when I click on it to access the drive, I get a "connection failed" bar across the top of the Finer window. If I click on the "Connect" button at the end of that bar, I get the following message:
"This file server is running on your machine. Please access the volumes and files locally."
The volumes (the drive is partitioned into two volumes) are not showing up as local ones (in the "Devices" section of the sidebar), so I can't access them "locally."
BUT, if I turn on Airport on the iMac, I get the normal "Connected as ..." bar & the volumes appear as expected in the Finder.
The really weird part is if do not turn on Airport & I use the "Connect to server..." Go menu option & enter "afp://Extreme's_name.local" it connects & either or both volumes mount on the desktop as expected. ("Extreme's_name" is the actual name I have given the device.)
Weirder still, if I have one of these volumed opened in the Finder & click on the Extreme in the sidebar again, I still see the "Connection Failed" bar across the top +yet the volumes are there in the Finder window+, can be opened, & otherwise behave normally.
This behavior persists until I click the eject button in the sidebar, at which point the "Connection Failed" bar reappears & the volumes are no longer listed or accessible. Waaaaa?
FWIW, my MacBook has none of these symptoms. Whether connected by ethernet cable or wirelessly, clicking on the Extreme in the sidebar results in the expected "Connected as ..." behavior.
I tried researching the "running on your machine" message on the web & found some references the problem in connection with Windows (smb) sharing. Sure enough, looking in my keychain access file, I saw several passwords for the Extreme with the "where" info as smb://Extreme's_name. However, deleting these (& even all Extreme-related entries) had no effect.
I'm stumped. Any help or even just a clue would be appreciated greatly.

I seem to have eliminated the 'connection failed' problem & its accompanying 'file server is running on your machine' message as follows:
My Extreme was set up for its DHCP server to assign local IP addresses in the 192.168.2.100 to 192.168.2.199 range. This matched how my old SMC router had been set up for years. The SMC's DHCP server was set up to always assign 192.168.2.100 to my iMac's Ethernet MAC address. I did this because my iMac was set up as a webDAV server to publish an iCal calendar on my local network, using the address "webcal://192.168.2.100/ical/MyCalendar.ics." This worked fine with both the SMC & the Extreme.
I'm not sure why I decided to try it, but I changed the Extreme's DHCP server to assign local IP addresses in the 10.0.2.100 to 10.0.2.200 range. Obviously, this invalidated the address for the published calendar, but the iMac now connects to the Extreme's drive without any problems. (For those who care, changing the calendar's published address to "webcal://MyMac.local/ical/MyCalendar.ics." fixed that issue -- IOW, substitute the computer name for its local IP address. I probably should have done that to begin with, but hindsight is always 20/20, right?)
So my problem is solved, but I still would like to know why this worked. AFAIK, either IP range is equally valid for private networks. Any comments would be appreciated.

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

Save image file in server machine from client

hai
I am working in swing based applications on linux environment.
I can able to save the image file from java appln to local directories.
My doubt is
how to save that image file in another machine in the same network or in the server machine through java application insead of saving in the local machine.
if anyone can help me to findout the solution?
advance thanks,
Samy.

The file can be read in the weblayer if it is sent as a mutlipart request. So once u have it i the Webserver u can always send it to the app server by posting it in a location which the app server can read using URL api

Simple network: Windows 7 file server & several Macs and Linux machines- SAMBA bombing out?

Hi guys, i know this is really more of a windows support question, but here goes:
Windows 7 Ultimate 64bit acting as a file server, turned off all the usual MS authentication stuff so Macs and Linux systems connect with password without issues..
except when i start copying certain files/file types/names to the system, it will break the network connection, then refuse any more connections, all macs and linux machines on the network are booted, from the PC however i can still access the Macs shares volumes.. (the macs still see the windows machine & pinging is still there, but if i try to connect i get 'check the name/ip address' error
im no expert, but its as if the Samba service on the windows machine gets killed and im not sure what to do to get it to re-connect other then restarting the system, but as the system is also a terminal server users always have apps/documents open and its 'never a good time' to do it..
if there was an alternate Samba to install, or a buffer patch, or even a 'goto this service, stop and restart' etc.
Trying to get help from the 'windows' community comes down to 'well your on a mac what do expect etc etc' *sigh*
any help is appreciated
Richard

Hi, just thought id update my finding regarding this, and it maybe directly affected by my only system, but in case anyone else has this issue?
I thought it may be due to the file name thats causing the lockups, but I found while trying to backup my collection of install images and updates that sure enough a simple named file 'osx10.6.3.DMG' going to the server, 850MB in it stalls and fails, now im not able to connect.
but form the PC, without changing the name or location etc, i copied the SAME from the Macs hard drive through to the windows system, all 5.7GB.
so it is something to do with my windows 7 system, but maybe more related to the size of the file then the name or non-standard characters as first thought.
as suggested by Grant above i will check on the server boards as well.
thanks

Windows 7 'File server' disconnects when XP machine connects to network

Hi guys,
We have a small office setup here, we have two Windows 7 machines, three Windows XP machines and one Windows 7 machine that acts as a fileserver (folder sharing and an SVN repository).
Every morning, I turn up to work, turn on my Windows 7 machine and the system works fine, but, as soon as one of my collegues turn up and boot up their Windows XP machines, the fileserver disconnects. The only way to get the fileserver up and running is
to restart it, this is obviously tedious and irritating. It only happens when an XP machine connects to the network and not when a Windows 7 machine connects.
Does anybody have an experience with this sort of issue or have an suggestions to resolve it?
Thanks, Simon.

Firstly, I am a Tier III Computer Technician/Software Programmer/Network Engineer who has been working on MS OS' since DOS3.
Secondly, Someone named Alex Zhaozx gets the ID10T award as he marked this as a solution. Alex... How is posting a MS OS license a resolve?
There is no resolution posted here.
For understanding, all references to Windows 7 will be marked as TRAP7 in the following info. After reading, you will understand why.
The other major note Simon has not mentioned, is that when the "disconnect" happens, all Windows XP machines can still interface with each other over the network perfectly (accessing each others Shares and drive mappings with zero network connection
issues). The TRAP7 machines can interface will all facets of each of the TRAP7 and Windows XP computers on the network with zero connection issues. It appears MS has placed a condition or timer to cause the disconnect to XP on introduction to the network. Simon
is slightly incorrect is his statement this only happens when a XP machine is booted, as it happens on all connection methods (whether it be wake from sleep and attempt to reconnect or access TRAP7 share/drive, idle computer attempting to access TRAP7 share/drive,
Windows XP computer attempting to access files on the TRAP7 file server for the first time, after each have been up and running independently (on the network) perfectly for hours...
We have a larger scope than Simon with 45 machines and 17 of them being Windows XP, the others are TRAP7 (32 and 64 bit varied) with 1 on Vista (The beginning of the end for MS OS').
I have been searching all MS sites and the other techie sites for a resolve and there has not been one "valid" resolution to this problem they have caused. Or was is my fault for using Windows 7 on a near perfect network?
C'mon maaaan. (intended for Bill Gates) Get this resolved or get out of the OS game, there are so many better OS's out there. Stop TRYING to DO things and start DOING them the right instead.
Belief: This is an issue caused by MS with full intention of forcing everyone to fully convert all at once because they are not getting the money they used to, as the global economy is now whacked. You notice... They have never stepped up to say anything
in this post. They just quickly made an attempt to brush this under the carpet.
BTW Alex Z: When you are ready to step up and get involved, let me know. I will get you any technical information you need to get this resolved.
John

"This file server is running on your machine." Message on starting Classic

I am having a problem with Classic starting up. When it is almost done loading, i get the message "This file server is running on your machine. Please access the volumes and files locally." The only option is Ok, but upon clicking it the message pops up again. At first it would crash Classic after about three times. After disabling file sharing in OS9, it shows up about ten times before stopping, and Classic continues to run.
System specs are in the signature (the first one)

Have you ever had AppleShareIP installed on your OS 9 System?
When Mac OS X Server is installed, it tends to be perfectly happy with having the Server on the same machine.

How to run jar file from command task , located in informatica server machine

Hello All,I have executalbe jar file located in informatica server machine, I want to execute this jar from command task from powercenter.I am new to Informatica, so please help me with it.I have give all the permission to the file, but still the task fails with following error. Command task instance: execution of command [Command1] did not complete successfully with exit code 256.How can I execute this jar file please help. Thanks

ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 온라인 추천ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 온라인 추천 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노 ユ 나이트팔라스카지노 ◈ top015。ℂℴℳ 【Ƹ̵̡Ӝ̵̨̄Ʒ】 나이트팔라스카지노

File server machine

Similar Messages

Maybe you are looking for