File to RFC Error

Hi,
I done File->RFC scenario. It was showing WAITING in
Message Monitoring. But in CC Monitoring showing error
like No suitable sender agrement found. Y it is
showing like this? even I done Sender Agrement?
thx and regards,
Ansar.

Hi,
Now I gone through this link
Re: Unable to find the processed message
Here they mentioned to check in http://<host>:<port>/mdt
I checked it. Then I found the error in Audit Log
as Delivery of the message to the application using
connection AFW failed, due to: error while processing
message to remote
system:com.sap.aii.af.rfc.core.client.RfcClientException:
could not convert request from XML to
RFC:com.sap.mw.jco.JCO$ConversionException: (122)
JCO_ERROR_CONVERSION: Date '25.09.2006' has a wrong
format at field DELIV_DATE: Unparseable
date: "25.09.2006".
Now how to give the date format?
thx.

Similar Messages

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

File to RFC (Error Mail )

Hi,
I have a requirement like legacy system details ( flat file ) send to RFC/Bapi and the status ( Success or Error ) should be updated to the concerned people with the mail. How can we achieve this in XI?
I have done with the File to RFC scenario...need help on update the status (error/ success) with mail.
Where should we implement mail adapter settings for this scenario?
Can anybody share their experiences with me.
Cheers.,
Esha

Hi !
You can make it as a File - Mail scenario, and call the RFC synchronously using JCO during the graphical mapping (or java mapping) using a user defined function.
Then, based on the response of the RFC, decide what should be the content of the mail or maybe decide not to send it.
pros: no use of bpm
cons: need ad-hoc methods for managing connection parameters of the rfc connection.
other:
RFC Scenario using BPM --Starter Kit
Regards,
Matias
ps: please award points if helpful.
Please read the Forum's Rules of Engagement,
i.e.,
/thread/117188 [original link is broken]
and refrain from requesting points
SDN PI/XI Forum Moderator

File- XI- RFC (Error: Received HTTP response code 500..)

Hi,
I am working on File->XI->RFC scenario, getting Processed Successfully status in "SXI_MONITOR".
But Data is not posted in SAP R/3. I check Runtime Workbench Getting following Error in one step.
Can any one help me in analyzing the error.....??????
2006-06-09 14:36:32 Success output 1149888992513 Channel WEBMETHOD_SENDER_SOAPFMTEST: Send binary file "/usr/sap/transx42/data/xi_input.xml". Size 175 with QoS EO
2006-06-09 14:36:38 Success output 1149888998592 Application attempting to send an XI message asynchronously using connection AFW.
2006-06-09 14:36:39 Success output 1149888999757 Trying to put the message into the send queue.
2006-06-09 14:36:40 Success output 1149889000823 Message successfully put into the queue.
2006-06-09 14:36:40 Success output 1149889000824 The application sent the message asynchronously using connection AFW. Returning to application.
2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001577 The message was successfully retrieved from the send queue.
2006-06-09 14:36:41 Success output 1149889001591 File "/usr/sap/transx42/data/xi_input.xml" deleted after processing
2006-06-09 14:36:41 Success SAPEngine_System_Thread[impl:5]_12 1149889001745 The message status set to DLNG.
2006-06-09 14:37:47 Error SAPEngine_System_Thread[impl:5]_12 1149889067522 Transmitting the message to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW failed, due to: Received HTTP response code 500..
2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067585 The asynchronous message was successfully scheduled to be delivered at Fri Jun 09 14:42:47 PDT 2006.
2006-06-09 14:37:47 Success SAPEngine_System_Thread[impl:5]_12 1149889067695 The message status set to WAIT.
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 Retrying to send message. Retry: 1
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367587 The message was successfully retrieved from the send queue.
2006-06-09 14:42:47 Success SAPEngine_System_Thread[impl:5]_9 1149889367643 The message status set to DLNG.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368435 The message was successfully transmitted to endpoint http://SAPR3001.bently.com:8042/sap/xi/engine?type=entry using connection AFW.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368471 The message status set to DLVD.
2006-06-09 14:42:48 Success SAPEngine_System_Thread[impl:5]_9 1149889368472 The message was successfully delivered.
Thanks & Regards

Hi Umesh,
I think, the reason is because of huge number messages ..
Also just go to RFC adapter, activate the adapter,refresh the cache and try it..
following guide will help you to solve problem~
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Just refresh the cache-The following guide will help you on that~
https://websmp101.sap-ag.de/~sapidb/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Refer these SAP notes- 807000,803145
(some hints)
Regards,
Moorthy

File to RFC Error com.sap.engine.interfaces.messaging.api.exception.Messagi

Hi ,
I am doing File to RFC Scenario.
My file get picked and I able to view the audit log under RWB message monitoring.
Here I am getting the error
u201CTransmitting the message to endpoint dest://XI_INTEGRATION_SERVER using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message using HTTPTransmitter. Reason: java.net.MalformedURLException: unknown protocol: dest.
Can any one tell me what is the reason.
Regards, Navneet

Hi Prakasu,
I am using PI 7.1 version .
When I opened SMICM there I am finding the HTTP Port as 52000.and the BS at SLD are also using the same Port in URL..
And when i verified with the Basis they confirmed that Exchange profile is set correctly.
But My file adapter is still not able to send the data to IS.
Than I configured a scenario file to file without IR object and in this case data is coming to IS and it is succesfull also.
what is the reason that in this case file adapter not able to push the data to IS.
I used File adapter with NFS protocol.
regards,
navneet

Error while calling RFC adapter(FILE-XI-RFC scenario)

Hi,
I am trying for FILE-XI-RFC scenario. I am getting the following error. I have checked in message monitoring. The error is coming while calling the RFC adapter. Can any body tell what problem is this?
Regards,
Dhana
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.f23.sofd00001530a</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.u7a.us4296</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.f23.sofd00001530a</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi,
I did SLD check.
The status says 'Summary: Connection to SLD works correctly'.
But it fails while checking the access to XI profile.
Here is the status
Summary: Connection to SLD works correctly
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DZ1
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
/ CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679#Transaction program not registere

Error when executing FM in Target System for File to RFC flow

Hi,
I am doing File to RFC. I have given Dialog User(my user) login details in RFC reciver Comm Channel for Testing purpose.
I am getting the below error.
Receiver channel 'CC_P1EUNL_WRAPPER_RFC_Rcv' for party '', service 'INTEGRATION_SERVER_PID' (internal name 'RfcClient[CC_P1EUNL_WRAPPER_RFC_Rcv]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=001, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=iroy_adm, jco.client.sysnr=15, jco.client.ashost=pmichsappid01.app.pmi}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=001, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=iroy_adm, jco.client.sysnr=15, jco.client.ashost=pmichsappid01.app.pmi}
Current pool size: 0, maximum pool size : 1.
The message is showing as successfull but at node, its showing the above Message.
Let me know what could be the Problem.
Regards,
Varun

hi,
this is not an error - it's just RFC details message
Regards,
Michal Krawczyk

Error in File to RFC scenario: ATTRIBUTE_WRONG_INTF

Hello,
My scenario is going from File to RFC which is simply writing to an SAP table.
My mapping seems OK and tests OK but in SXMB_MONI I get red flag and error below:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>ZDWM_POS_UPDATE</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface ZDWM_POS_UPDATE</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The posts I see in the forums with this text have to do with an external deffinition being incorrect. I don't have an ED, it is mapping right to our custom RFC interface ZDWM_POS_UPDATE.
Does anyone have any ideas or pointers for troubleshooting this?
Many thanks,
Aaron

Hi Aron,
You should not create any message interfaces refering to RFC.Infact RFC acts both like Message type and Messge interface.
In interface determination choose ALL radio button and choose Idoc itself instead of interface.
Also the interface mapping should be b/w Fileinterface<-->RFC directly (no need of interface)
Hope this helps.
Regards,
Divya

ERROR IN FILE--XI--RFC SCENARIO. BAPI did not UPDATE the DATABASE TABLE

Hi
I have created a scenario FILE -XI- RFC
File is picked by file adapter - Its working fine
I have used BPM
In RFC side i used BAPI_INCOMINGINVOICE_CREATE
Its working fine and return an Invoice Number and Fisical year .
When i Check this in the R/3 System , in Invoice no Does not Exist .
Message mapping is ok
SXMB_MONI all are ok
Receiver file i got the invoice no and fisical year .
The Problem is " DATABASE TABLE DID NOT UPDATED "
So should i do BAPI_COMMIT seperately ........
Any solution ................
VERY VERY URGENT .....
thanks in advance
B.Jude

hi jude,
Commit Control for Single BAPI Calls
If you want to use this communication channel to call BAPIs as remote-enabled function modules that change data in the database, set the indicator.
If executed successfully, the transaction is written to the database by calling the function module BAPI_TRANSACTION_COMMIT explicitly. If an error occurs, the transaction is rolled back by BAPI_TRANSACTION_ROLLBACK.
The result is determined by the value of the field TYPE in parameter RETURN. If successful, the tables are empty and the values , S, I, and W are displayed. All other values are regarded as errors.
To change this setting, set the indicator BAPI Advanced Mode.
In the Successful RETURN-TYPE Values table, enter the values that should lead to a successful execution.
Regards,
Mandeep Virk

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

Error in file to rfc scenario

Hi
I am trying to execute a synchronous scenario of file to RFC. Actualy it worked in XI 7.0. I am trying to do the same thing in PI 7.1
I have done all the configurations, yet it shows the error.
Worst part is, it is not shown in sxmb_moni. The status is not displayed.
Where could the problem be? Did i miss somewhere either in installing or configuring?
Kindly let me know.
Regards,
Kevin

Hi
Hey but u said its a file to RFC???
in the module name write : localejbs/AF_Modules/MessageTransformBean
(see that it is the first module in the chain )select type as localejbs,
in the module key just add a simple name (it is the variable which depends on u e.g var)
This variable will be used ahead (see below in cc in module configuration part in ur channel )
now in the column module key below choose the key "var" from drop down
In Parameter Name add Transform.Class and the value as com.sap.aii.messaging.adapter.Conversion
second row add parameter Transform.ContentType
and value text/xml;charset=utf-8
for the same module key
Edited by: Progirl Progirl on Jul 18, 2008 12:53 PM

Error in Scenario File to RFC

Hi Experts,
I´m with a problem in a interface FILE->XI-RFC (assynchronous).
I created a file in FTP directory and configured adapter file with pool 60 sec.
I´m testing in MM is OK.
I´m testing in IM is OK.
In SXI_MONITOR is OK.
When I go to Runtime -> CC Monitoring, display following error:
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(1): com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing n.
Can someone help me??
tks

Hi peoples...
this problem was resolved...
My problem now is other...
I´m in RWB and now display this message:
Success     Channel CC_FILE_SENDER: Entire file content converted to XML format
Success     Send text file "sap_lims_file_1000000.txt" from FTP server "qtrsmrdev01:processar", size 431 bytes with QoS EO
Success     Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
Success     Trying to put the message into the send queue.
Success     Message successfully put into the queue.
Success     The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
Error     Attempt to process file failed with com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Does problem is tha absent module processor in adapter sender????
ROD

File to RFC(BAPI) asynchoronous strange error.

Hi,
Iam doing a File to RFC scenario. It is a sale order creation. We are using the BAPI BAPI_SALESORDER_CREATEFROMDAT2. I tried to execute the BAPI in R/3 manually with the mandatory fields like DocType, Material, Quantity, Parnertype & Partner number. It is executed successfully manually. But when implemented the same in XI with the same data. It is throwing some stange errors like
Order type not defined.,
TYPE='E', Message (ID:VP, NUMBER:112): "Please enter sold-to party or ship-to party", LOG_NO:, LOG_MSG_NO:000000 (PARAMETER:SALES_HEADER_IN, ROW:0, FIELD:, SYSTEM:ERDCLNT220)
TYPE='E', Message (ID:V4, NUMBER:219): "Sales document was not changed", LOG_NO:, LOG_MSG_NO:000000 (PARAMETER:, ROW:0, FIELD:, SYSTEM:ERDCLNT220).
Finally BAPI Executed with the errors. Manually it is working in R/3. But when I call it Xi it is erroneous. Please help me in resolving this.
Thank You.
Radhika.

>>Finally BAPI Executed with the errors.Manually it is working in R/3. But when I call it Xi it is erroneous.
It should be because of the DATA you are passing to the BAPI.
Try to execute the scenario by passing similar data to bapi that was executed manually and check what happens.
Also check if you have missed to map/pass some fields value to BAPI which is causing the BAPI to error out. Check you mapping again...
Thanks
SaNv...

RFC error in idoc to file scenario in PI 7.0

Hi Experts,
I am getting a RFC error message like this below
:u201D RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_XI_SEND_MAIL in remote system (RfcClient[RFC_REJECTION_MAIL]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.u201D
Here Z_XI_SEND_MAIL is a customised function module which is calling some classes. This function module is responsible for sending emails to a group of people. This function module is working fine in acceptance server and development server but throwing exception in production. Thus the users are unable to receive emails. There has been no code changes in the function module. Idocs are being triggrred from sap r/3 system into XI, then being processed by a BPM, finally RFC (Z_XI_SEND_MAIL ) is being called to send email messages. SXMB_MONI is showing that the email message is being send to the RFC properly but communication channel is showing the above mentioned error.
Please suggest me what might be the reason of such errors?
Regards
Anupam

Hello,
Have you tested the production data in your acceptance system or development system for the interface?
Is it working fine??
It seems that the function module is generating exception, which could be due to data.
-Rahul

Error loading fields in file to RFC (bapi) scenario

Hi,
I'm developing and testing a file to RFC interface
In message monitor all is processed successfully and payload in Technical Routing it's like:
- <IT_TAB>
- <item>
<WERKS>0001</WERKS>
<FECHA>20080129</FECHA>
<HORA>131250</HORA>
<FILENAME>filename</FILENAME>
<MATNR>000000000000000015</MATNR>
<SPEME>00000000.000</SPEME>
<LABST>00000432.000</LABST>
</item>
- <item>
... </item>
I've create a function in R3 which imput table has the same fields (werks, fecha, hora, filename, matnr, speme, labst)
However, when i try to process data, this function seems to load fields incorrectly:
werks = 0
fecha = 00000000
hora = 000000
filename = 0150001
matnr = filename
Why?
Carme

Hi Carme !
1) check that the imported RFC definition in XI is the current one and matches with the one of SAP R3.
2) check that you mapped the file message type to the imported RFC request message type object
3) check that the mappings are ok. Test mapping works ok?
4) try to use a file adapter instead of an RFC adapter in the receiver channel to have the content of the input file written on a file in the file system to check if the data is coming in the right format out from XI.
5) try your RFC manually in R3 and see if it works ok.
6) compare the data types of the parameters between the RFC that does not work and one that it does, to see if there is something strange
Regards,
Matias.
ps:please award points if helpful

File to RFC Error

Similar Messages

Maybe you are looking for