File transfer from PC to IMac

I am trying to transfer .jpg files from a PC to IMac. I am using an ethernet cable; configured the PC file folder to "Share this folder"; yet when I go to the "Go" menu in Finder and "Connect to Server" as some time I get the following error message:
"Can not complete because some data in (IP/file name) could not be read or written."
How can I get these files transfered directly? Thanks

Hi, I too am trying to transfer files from my old windows 98 pc to my new iMac but can't connect the two computers. I have opened file sharing on the pc and mac.
I have tried following all the instructions i can find but get an error -36.
When I run 'winipcfg' on my PC the PPP Adapter IP address is 0.0.0.0 and the Realtek IP address 192.168.1.2. I sometimes get the message 'Could not connect ot the server because the name or password in not correct."
Also, in the Mac instructions for doing this it tells you to type in the network address smb://IPaddress/sharename. I'm not entirely sure what the sharename is ....
This is the only way to get all the files off my old pc as the cd writer no longer works and the memory stick I got won't work on 98! Please help

Similar Messages

  • I have a new iMac and want to transfer files etc from my old iMac with an ethernet cable

    i have a new imac and want tot ransfer files etc from my old imac using an ethernet cable

    Connect them together with Ethernet cable and use Setup Assistant.

  • Original File transfer from G4 to new G5

    About to buy G5 20" this week -
    Apple Store says they can do file transfer from my imac G4 to new G5 for me at time of purchase, but cannot transfer any 3rd party apps (Photoshop, Ill, DreamW, Acrobat, Word, etc.). However in users manual it looks like if I do it originally myself with SetUp assistant, I can include these apps -- but perhaps not later using Migration Assistant after Apple Store has used the SetUp assistant. I'd like to avoid having to re-install all my apps if possible.
    Also, If I do it SetUp Assistant myself, is it best to use Firewire cable vs. Ethernet?
    Any intelligence/advice would be appreciated.
    thanks

    I would just drag app files over via Firewire (which is superior over ethernet).
    Here is how it is done:
    http://docs.info.apple.com/article.html?artnum=58583

  • File Transfer From Unix server to Windows Client System Using WebUtil

    Hi all,
    I want to Transfer a File from Unix Server to Window Client System using Webutil. But below mention code is not working.
    DECLARE
         V_Server_Path VARCHAR2(500) := Null;
         V_Client_Path VARCHAR2(500) := Null;
    BEGIN
         V_Server_Path := '/proj/oraapps/viper/dev/reports/cache/Saveauftr.txt';
         V_Client_Path := 'C:\Migration\EU_Applications\Lima\OAS_WorkArea\Client\Saveauftr.txt';
         IF WebUtil_File_Transfer.Is_AS_Readable(V_Server_Path) THEN
         IF WebUtil_File_Transfer.AS_To_Client(V_Client_Path,V_Server_Path) THEN
              Message('Downloading the File ..... .... ... .. .');
              Message('Downloading Was Successfull ...');
              Message('File Transfer from Server Was Successfull ...');
         END IF;
    END IF;
    END;
    Can anyone suggest me,Why the above code is not working and what to do for solve the Problem.
    Regards
    Gany

    Hello,
    You have more chances to get an answer in the Oracle Forms OTN Forum :
    Forms
    Regards

  • Getting error in file transfer from one system to another system

    Hi All
    One of my client (User) wants to transfer his file from  SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the  program he is getting error "File Transfer Failed due to Network chk with Admin"
    I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
    Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Please help me to resolve this problem. I any detail require I will provide the same.

    Guruprasad Wrote:
    He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
    If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
    Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
    Regards,
    Raghu

  • I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

    I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

    I was transering my album from version 10 to version 11.  I got on-line help and I and all set.  Thanks for getting back to me.  Dave
    Scott V <[email protected]> wrote:
    Scott V http://forums.adobe.com/people/Scott+V created the discussion
    "Re: I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?"
    To view the discussion, visit: http://forums.adobe.com/message/5105851#5105851

  • File transfer from one system to another system

    How can I use ODI to do file transfer from one system to another system ?
    Do I need to create Models or I have to simply use Jython procedure/script to do the same ? Kindly help. I have done DB to DB using Knowledge Modules. But I am not able to understand this piece.
    Kindly help.

    If you are asking about file transfer use ODI FTP tool to do it. If you are asking about file transformation..
    You can not do file transformation directly in ODI like we do in any other ETL tool like data stage or Ab Initio.. File transformation in ODI can be done using staging database in an interface(i.e ELT way).
    Create source and target data stores for the file to be transformed. Create an interface using File to SQL LKM to load the file into staging database and then use SQL to File Integration knowledge module.
    Thanks,
    D

  • File transfer from old G4 iBook to new MacBook Pro

    I hope this is the right place for this post/question....
    I am trying to do a file migration from my old iBook G4 PPC to my new MacBook Pro. The iBook does not have the migration utility and when I put the new OSX DVD in from my MacBook (as instructed to do in the Migration utility's steps) it does not read it (presumably because it is not the right processor, etc) so I had no luck doing the computer to computer transfer. I do not have the "Time Machine" utility on the old computer and using my regular back-up did not allow me to migrate using the "other drive" option (MacBook never saw the drive in the utility, but does mount it and allow me to access it as a drive). I can do this the hard way, file by file, but I have a couple of concerns that I want to check on before I spend hours going down a bad path.
    1) I have thousands of songs in my iTunes... can I drag and drop these? What about my play lists?
    2) iPhoto - I have thousands of photos - how do I easily transfer those over in their respective scrapbooks?
    3) Bookmarks, I can deal with by trying to find the file and importing them, or doing it manually, although there are a lot of them. Easier way?
    4) Outlook - I can try to export and import using the built in features, but not sure if that will pull all the folders and structure.
    Those are the big ones... I have had this computer for 8 years, so it is pretty embedded in my life and I am hoping for a utility or something that will help this process.
    Thanks in advance for any help.
    Keith

    The migration utility in the newer computer's OS X would usually allow
    the older Mac's info to be pulled into the new computer; the installer
    disc for the new Mac won't do anything for the old PPC Mac since it
    would be unreadable. Intel-based Mac machine-specific discs won't
    work in PPC-based Macs; and in general different machines can't
    or won't use the install-restore discs from other models.
    There may have been a way via ethernet, usb or firewire to share files
    using a System Preference panel setting to facilitate this action. The
    suggested method should be adequate. You can also put an iTunes
    library and iPhoto library on a suitable external drive to par-down the
    content and reduce clutter in a portable computer's hard disk drive
    and still be able to access those carefully moved libraries from there.
    Some good support documents in Apple Support tell how to do this.
    In Firefox, you will have to rename the old folder of bookmarks to the
    same name as the existing new apps folder for them to be seen. I
    just replaced folders, carefully, so if that didn't work the first time, the
    items were easy to find and try again later. Once you get the folder,
    the contents should appear in the new browser version as they had
    in the older one, to some extent, after the file or contents are moved.
    Good luck & happy computing!

  • File transfer from source to destination location using 11g b2b

    Hi,
    I have a requirement where I need to transfer a file(custom file format) from a source location to a destination location using 11g b2b.
    The problem here is I can't use any composite to push data to b2b, it has to be through b2b configuration alone.
    If i understand correctly, delivery channel (in this case transport protocol is FTP) is defined for a trading partner and we specify the hostname,destination folder etc in the transport protocol parameter.
    Is there a way I can specify the source location anywhere in the B2B configuration screens so that b2b understands what is the source and destination location to transfer the file.
    Steps that I have followed:
    1. created remote trading partner
    2. created document definition for a custom file format
    3. Configured Delivery channel for the remote trading partner.
    4. Created an agreement.
    Is there anything else I can do to solve this problem.
    Regards,
    Satrajit

    Hi Nitesh,
    Thanks a lot.
    I tried with Generic file and the file is getting picked up from the source location but its not getting delivered to the destination.
    Checked file permission in the destination and its fine, files can be created there. Also, checked the reports section and saw those messages in error with
    Error Code: B2B-50014
    Error Level: ERROR_LEVEL_COLLABORATION
    Error Text: General Error
    Steps I have followed:
    1. Created Internal Listening channel
    Protocol: Generic File-1.0
    Folder Name: Important.txt
    Folder Name: /home/applvis/dev/Inbound_dir and specified it as internal.
    This is working fine as file is getting picked up from the location
    2. Created Delivery channnel for the remote trading partner.
    Protocol: Generic File-1.0
    Folder Name: /home/applvis/dev/Outbound_dir
    Filename format: Ship_%FROM_PARTY%.txt
    3. Created and deployed the agreement.
    Am I missing any necessary step here?
    Regards,
    Satrajit

  • Photoshop Elements 10 installed on my computer. Ready to install elements 12. Will my digital files transfer from 10 to 12?

    I have Photoshop Elements installed on my Windows 7, 64 bit computer. I want to install Elements 12. Will my digital files in the Organizer transfer from Elements 10 to 12 with no problems?

    ccr306
    If your programs are Photoshop Elements, then you have posted in the wrong forum. This is the Adobe Premiere Elements Forum (video editing), not Adobe Photoshop Elements Forum (photo editing).
    Photoshop Elements
    If wrong forum, then please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
    If I were doing this I would probably have the two versions of Photoshop Elements on the same computer and convert the Elements Organizer 10 catalog in Elements Organizer 12. (See Elements Organizer 12, File Menu/Manage Catalogs/Catalog Manager/Convert. But, best ask the experts in the Adobe Photoshop Elements Forum.
    The following Adobe document on upgrading Elements Organizer catalogs may be of interest
    Common catalog upgrade issues | Organizer | Elements 6 or later
    ATR

  • How to transfer  from dongle to iMac

    how do i get  photos from usb to iMac
                                                                   regards Dunc

    Connect your dongle to your mac. Open your dongle, select files which you want to copy and paste them on your mac.

  • Transfer from older (2006) imac to newer (2011) macbook pro

    I have 2006 imac running Snow Leopard (10.6.8). I just bought a 2011 Mac Book Pro running Mavericks.
    Can I use the normal transfer procedure (firewire) to transfer from the older to the newer. The newer already has applications installed.
    Thanks

    Yes.
    Target Disc Mode

  • File Transfer from non-SAP System.

    Hi Experts,
    We have the requirement to copy/transfer file from non-SAP system to SAP system file server. Can we use these FMs FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT?
    or can we also use SXPG_COMMAND_EXECUTE?
    Thanks,
    Edson

    Hi Varma,
    Thanks. I'm looking at the FTP_COMMAND FM. If I got it right the 'command' parameter here should be the OS level commands? Example would be cp <file path from source> <file folder of destination> for unix. ?
    Thanks again,
    Edson

  • File transfer from client to AS

    hi,
    I want to transfer a text file from my c:\text.txt to application server c:\files\files.txt.
    Hw can I achieve this using oracle forms webutil file transfer?
    becasue when i read the file using client_text_io it takes a lot of time.
    thanks and regards
    Ajith

    Look at Francois's Blog
    Forms : TEXT_IO vs CLIENT_TEXT_IO
    http://fdegrelle.over-blog.com/article-1810290.html
    too.

  • Bluetooth file transfer from BB Z10 to Windows 7 Laptop

    I have my BBZ10 (OS 10.2.0.424) successfully paired with Windows 7 Laptop. I often use the BBZ10 BT Internet Teethering. It works very well.
    However, when I want to transfer a file from BBZ10 to my Laptop. I follow this process
    In the background the Internet Teethering is ON, and working
    select the file in Z10 File Manager.
    click on share icon to share using BLUETOOTH
    Before pressing the name of my paired devices on Z10. I click Bluetooth icon on laptop and select 'receive a file'. This opens a box showing the laptop is waiting in receive mode.
    Then I select my paired computer name on Z10 to initiate transfer.
    The transfer bar appears on Z10 showing the progress, but in 4-5 seconds, it says 'TRANSFER CANCELLED'.
     And on my laptop it says 'BLUETOOTH FILE TRANSFER NOT COMPLETED'.
    i have used exactly same process with my BB 9800 several times with success.
    Another thing I note is, if the Internet teethering is OFF, I cannot turn BT connection to the laptop on. It come up with error message ' Cant' connect , you must turn on internet teethering on yoru device.'
    Please troubleshoot.

    hi eddie-n200,
    Can you send a file from the laptop to the cellphone? If you can, check if the "Allow remote devices to browse, send, and receive pictures, music, and other files" option is enabled on the BT settings:
    Spoiler (Highlight to read)
    As an alternative, you may also want to try Bluesoleil or similar software to send/receive from the laptop.
    Edit: Added image
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for