File Write In Batches Is Not Consistent.

Hi,
Could you please explain why File Write in batches behaving like this:
http://lksoablogs.blogspot.com/2012/01/file-write-in-batches-is-not-consistent.html
Thanks.

The FileRead publishes a message after 2 "messages" / lines are read to the Mediator.
The Mediator sends these to the FileWrite.
The FileWrite starts to write output to the file after 2 messages are recieved (these messages contain 2 lines from the original file)....
What do you want to achieve? What results do you want to get?
hth,
Peter Paul

Similar Messages

File adapter polling frequency is not consistent in SOA 10g!

Friends,
I have used file adapter for polling files in a service in SOA 10G env. with polling frequency 3600 secs. However, i have noticed file polling is not happening at 60 mins interval, instead some times files getting polled in less than 30 mins but again after sometime its polling correctly in 60 mins interval. I am not sure what could be the reason but i need a solution urgently. Please help!

Could be the managed servers in the cluster are not in sync.
I faced DB JCA adapter sync issues because of Oracle soa suite bug.
You could check whether any sync issues are there with File adapters.

ICloud Notes app is logging lots of errors deny file-write-create externalrecordsworkfiles et al

I am getting intermittent error in the log, when using Notes in iCloud storage. When the errors come, they come in large batches.
Like this, many of them (dozens in one note-writing session)
2/11/13 1:04:17.525 PM sandboxd[1097]: ([363]) Notes(363) deny file-write-create /Library/Caches/com.apple.coredata.externalrecordsworkfiles
And fewer of these:
2/11/13 1:00:52.000 PM kernel[0]: Sandbox: sandboxd(1097) deny mach-lookup com.apple.coresymbolicationd
And one of these:
2/11/13 12:52:47.130 PM sandboxd[1090]: ([1091]) mdworker(1091) deny file-write-owner /Users/xxxxxxxx/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1.s toredata-wal (import fstype:hfs fsflag:480D100 flags:240000005F diag:0 uti:com.apple.notes.externalrecord plugin:/Library/Spotlight/Notes.mdimporter - find suspect file using: sudo mdutil -t 5593589)
It is clear to me Notes is having problems. I've seen this when using Notes since upgrading to 10.8, but also after upgrade to 10.8.2 recently (MBPro 2011 13", SRAM disk). I go typing away in toes but I see the Console icone bouncing in the dock while I'm working.
I'll run disk-verify-fix but I'm not seeing a lot of relevant entries, just this so far:
Verifying permissions for “Macintosh HD”
Group differs on “Library/Java”; should be 0; group is 80.
Permissions differ on “Library/Java”; should be drwxr-xr-x ; they are drwxrwxr-x .
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/CoreGraphics”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Resources”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
Permissions differ on “System/Library/Frameworks/CoreGraphics.framework/Versions/Current”; should be lrwxrwxrwx ; they are lrwxr-xr-x .
- all permissions now fixed.

When you say using the JDK you mean just using a simple text editor and command line to compile?
I'm not too bothered about decompilation as I doubt anyone would go though the effort to decompile this particular program. As it currently stands I'm the only one known in my college class to try my hand at Java anyway. Anyone else handing a java project in would be very suspicious.
How big would the program be if the JVM was included? Is it an intricate process to combine the two?
I am aware that any code can be decompiled but e.g. VB programs can only be decompiled into assembly... atleast I have yet to see a proper VB decompiler in action.
The app.path Java equivelant I need so the files needed by the program which should be in the same directory can be found with ease.
What compiler did JBuilder come with? It's own or did they simply include Sun's?
Whats the general opinion of V J++? is it pretty much Java or has M$ screwed it over and turned it into their own?
When an argument is passed to a method in Java is it referenced in memory or is a copy created? How do I pass an array to a method? and not create a copy of it? ref?
Can applets perform read and write actions on the machine it is stored? Can I refuse connections if a client is already connected?
Thanx

File Receiver Adapter Batch File Not Invoking:

Dear All,
I am trying to invoke a Batch file in the Receiver File Adapter after Message processing.
The Batch file is not at all getting invoked at all. i dunno whats the reason. Please help.
Below is the Format in which i gave the batch file:
F://Test//prakash//Endseperator.bat %F
then i tried:
F:\Test\prakash\Endseperator.bat %F
then i tried
F:
Test
prakash
Endseperator.bat %F each folder seperated by '
' whixh cannot be seen here.
below is the batch file content of Endseperator.bat :
F:
cd "Test\prakash"
java Endseperator "%F" "%F"
Its working perfect when i manual execute the batch file. But i am not able to invoke via Receiver file Adapter.
Please Advice.
Regards,
Senthilprakash.
Edited by: senthilprakash selvaraj on Dec 18, 2008 11:47 AM
Edited by: senthilprakash selvaraj on Dec 18, 2008 11:48 AM
Edited by: senthilprakash selvaraj on Dec 18, 2008 11:49 AM

Hi Senthilprakash,
I guess you must know that the batch file must exist on the XI server, not on your local machine.
if yes, try with one / like:
F:/Test/prakash/Endseperator.bat %F
Make sure the user <sid>adm (in case of Unix) or SAPService<SID> (in case of windows) has the execution right of your program.
Jayson

It seems like Illustrator may not consistantly be updating the embedded pdf file when we re-save..........

It seems like Illustrator may not consistently be updating the embedded pdf file when re-saving, even if the embedded illustrator file does. We are seeing a number of issues which seem to suggest this is going on..... I have a file I might be able to share with adobe's developers to really look at this problem. In short this file does not have a client change when viewed in reader or output through Photoshop image processor to generate raster copies, yet when we open the file we see the client changes. I would expect this to be a huge issue..... I have told my team to perform a save-as from now on to avoid what I think is going on-it seems to work.....
We are using Illustrator CS5.5 (15.1.0)

Post Author: fyz
CA Forum: Exporting
Hi,
I think your pdf file is probably damaged. There is a tool called Advanced PDF Repair. I have used it to repair many corrupt PDF files successfully. Its homepage is http://www.datanumen.com/apdfr/ Maybe you can have a try.
Alan

How to Upload a file in a Batch Mode ?

Hi, I want to upload a Comma separated value File via RFC to a BW system.
The scenario is the following: From a Portal server i call the BAPI using JC0/JCA.
The problem is that GUI_UPLOAD does not support a BATCH job. At least i get a error when calling the BAPI: Exception condition "NO_BATCH" raised.
How do i upload a file in a Batch Mode ?
Thanks,
Kai

Hi Kai,
Sorry for the delay. The delay was in trying to get to talk to the Basis team.
Here is how we have it.
On the message server of every instance, there will be a SAP admin id that is '<SID>ADM' or 'SAPSERVER<SID>' where SID is the system ID. We use the '<SID>ADM' user id.
On the external NT fileserver, there has to be a user id created on the NT box with the same SAP admin id and this id on the NT box should have access rights do Read/Write.
All of these have to be in the same domain (or different domains that have trust access to each other).
So, there is basis,network and security groups involved.
Once these are in place, we can have file access to the external fileserver box.
We use logical filenames at our place (Transaction FILE).
This makes all the file transfer locations well organized and manageable.
Hope that answers your question regarding this.
Regards,
-Ramesh

How to execute a .sql file from a batch file

Hi all
I've to take backup of a database weekly twice on every wednesday & Friday @ 5pm IST. I've written a hot backup script, which works every well.
now i want to automate the script. ie i want this script to run on wednesday & friday @ 5pm without any human interfearance ie with out actually any1 executing this script.
i created a batch file prod.bak with the following lines
@echo off
set oracle_sid=testdb
set oracle_home=d:\oracle\ora92
sqlplus /nolog
connect sys as sysdba/oracletest@testdb
this batch file when eexecuted connects me to sql prompt.
Now i want to execute my backup script bkp.sql automatically when it is connected to sql prompt.
(i tried with these lines in the above batch file...
call bkp.sql---it just opens the bkp.sql file in notepad & displays the script
start bkp.sql---same as call
connect / as sysdba/pwd@[email protected] --- does not work simply remains a the sql prompt.
At 17:00 /Every:w,f "d:\bkp.sql"---does not work simply remains at the sql promt.)
Can any1 let me know what should i write in the batch file that will execute the bkp.sql file automatically after it gets connected to sql prompt. M using oracle 9i.
I'll manage he time through windows utility of scheduling task.. Let me know how to execute the .sql file from a batch file.
Thanks
Tripti

Try
sqlplus "sys/oracletest as sysdba" @bpk.sql
Working locally, and having set the ORACLE_SID, you don't need to specify the SqlNet alias (@testdb).
Remember to put an exit at the end of the bpk.sql script.

Batch Delete Notes

By mistake, a Notes file from act was imported twice into Siebel, creating duplicate entries of every note in the file. Is there a way to batch delete notes from Siebel?
Edited by: Dani Duran on Apr 20, 2009 8:04 AM

Hi, This is my understanding. Batch delete seems to be available along with the list feature. As such there are no ways to prepare list out of notes, So there seems to be no option to me to delete it by batch delete. The other option could be to write a WS code. hope this helps
-- Venky CRMIT

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

File Upload UI element is not working properly inside Table Popin container

Hi Expert,
I created a table with popin, i placed file-upload UI element inside table popin contatiner.
The file upload UI element is displaying properly but, when i click the browse button to select the file, the file open dialog box is not popping out.
will table popin support file-upload UI element inside it?
it not is there any other way to call a file_open dialog box from inside the table popin.
Thanks,
James

If you are on NetWeaver 7.01, you can try both the ACFUpDownload UI element or try creating your own FileUpload in Adobe Flex with Flash Islands. ACFUpDownload requires the KPRO by default (which is why the same application isn't working for you), but you can write your own handler class to act as the KPRO receiver. Here is an eLearning on the topic:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/109b9b52-bc00-2c10-8786-e4c5e96d7e04
and source code:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70645070-bb00-2c10-f086-f126721acdb4
If you want an eLearning on the FlashIslands approach, you can find it here as well:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d42644-91ef-2b10-228c-9e0ae75b274e
and Source Code:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f044b62c-90ef-2b10-64a6-9ec25294d133
However in both of these approaches you still have to be careful with how you handle large files. The problem is that they are processed often a single binary string. This makes the processing easy, but requires total amount of session memory at least as large as the file being uploaded. In NetWeaver 7.02 ABAP adds the concept of Streams and Locators to help with the partial processing of large files. This feature doesn't come until later this year, but if you are interested you can learn about it here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f983df-213e-2c10-ba89-b5a12ef178e8

How to delete a file by using batch file

hi
i tried for deleting a file from batch filr in Linux environment.
it is working when i run batch file thruogh command line.
but its not woking through program.
i am sending tha code that i used in tha program.
First i have to create the file and send the information to that file
and the content from taht file after that i have to delete the file.
For that i wrote code but the batch is not woking.
Batch file
@echo off
rm filename
Actual Program Code
I used RunServer
public class RunServer extends Object
RunServer();
String cmdServer = "test.bat";
Runtime run = Runtime.getRuntime();
Process p = null;
try
p = run.exec(cmdServer);
catch(IOException e)
System.out.println("Error:"+e);
By using RandomAccessFile i am creating a file
please help me
Thankyou

1) You can't execute a batch without having a shell.
2) It's totally stupid to run a one-line batch file from system.exec.
3) It's also totally stupid to delete a file using Runtime altogether.
But there you go...

Creation of File through Scheduled Batch Job

Hi Friends.
How to create a file through scheduled batch job .ie data has to be sent in particular file which should be stored in SAP so that The file is expected to provide quick reconciliation when data in SAP gets archived .
With thanks and regarsds
Uma

Which part? The creation of the file? Since running in background, you would need to create the file using DATASET statements on the appliation server. You will not be able to put the file on any frontend PC or server, only on the application server where you program is running.
Regards,
Rich Heilman

Introducing a wait after Send step - file write in cc BPM

Hi
We have a cc BPM - in which we have a send step - that writes a to a file system - we have a transport acknowledgement requested in this step - which we receive in runtime - once the message is passed into the Adapter engine ( not after the file is written )
The requirement is that the next step after this send step should not be started until the file is written to the folder. We have an option of introducing a wait - but do not want to delay the BPM by a full minute ( the least wait time is a minute ) .
How do we make sure that the step after send step - file write executes only after the file is written to the folder in the send step ?
Any ideas, solutions, work arounds ?

we have a transport acknowledgement requested in this step - which we receive in runtime - once the message is passed
into the Adapter engine ( not after the file is written )
Transport Ack sends back the ACK when the message is successfully delivered from the Adapter Engine (channel) to the end system.....and not when the message is transferred to Adapter Engine....if there is any error in sending message to AE then the BPM does not need Transport Ack logic to ctach it....only Exception Branch is enough then
is there any other way of introducing a wait - less than a minute
The Wait step of BPM cannot go below the minimum limit of 1 minute......if you want to introduce a delay of some seconds then in a mapping use the Thread.sleep logic and check.....this will slow down (stop) the processing....for more info refer:
Re: Delay in MM possible ?
Regards,
Abhishek.

Metadata of Controller EMPTYVIEW Is Not Consistent.

Hi,
After upgrading NW04s from SP07 to SP11, one of my web dynpro for ABAP application gives the following error on execution.
I am also getting a system dump. I have checked all the necessary services in SICF & most of the required services are active. Does any one have some idea of how I can resolve this error.
Error when processing your request
What has happened?
The URL http://ustca644.kcc.com:8086/sap/bc/webdynpro/sap/zvmkc_tsvm_main/ was not called due to an error.
Note
The following error text was processed in the system PGW : Metadata of Controller >EMPTYVIEW< Is Not
Consistent. "View Controller" Does Not Contain a "View"
The error occurred on the application server ustca644_PGW_20 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONTROLLER_KIND_TO_TEXT of program CL_WDY_RG_META_SERVICE========CP
Method: CONSTRUCTOR of program CL_WDY_RG_CONTROLLER==========CP
Method: GET_CONTROLLER_PARTS of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE_COMPONENT of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE of program SAPLWDR_RUNTIME_REPOSITORY
Function: WDR_SAVE_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
Method: SAVE of program CL_WDR_RR_DB==================CP
Function: WDY_WB_GENERATE_INTERNAL of program SAPLWDY_WB_ACTIVATION_SERVICES
Function: WDY_WB_GENERATE of program SAPLWDY_WB_ACTIVATION_SERVICES
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system
PGW in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on
the application server ustca644_PGW_20 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work
process 0 in transaction ST11 on the application server ustca644_PGW_20 . In some situations, you may also need to analyze
the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 400 -u: C14216 -l: E -s: PGW -i: ustca644_PGW_20 -w: 0 -d: 20070222 -t: 222514 -v: RABAX_STATE -e:
UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
System Dump
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WDY_RG_MD
Date and Time          02/22/2007 22:25:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_WDY_RG_MD' was raised, but it was not caught anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_WDY_RG_META_SERVICE========CP' has to be
terminated.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDY_RG_MD', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Metadata of Controller >EMPTYVIEW< Is Not Consistent. "View Controller" Does
Not Contain a "View"
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_WDY_RG_MD"
"CL_WDY_RG_META_SERVICE========CP" or "CL_WDY_RG_META_SERVICE========CM001"
"CONTROLLER_KIND_TO_TEXT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "ustca644"
Network address...... "165.28.85.39"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PGWA"
Database type..... "DB2"
Database name..... "PGW"
Database user ID.. "SAPR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 30 2006 00:08:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "DB2CLI.DLL 08.02.0003 "
Patch level. 83
Patch text.. " "
Database............. "DB2 for OS/390 7.1, DB2 for OS/390 8.1, DB2 for OS/390
9.1"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 0
MM Used. 12837904
MM Free. 3918160
User and Transaction
Client.............. 400
User................ "C14216"
Language Key........ "E"
Transaction......... " "
Program............. "CL_WDY_RG_META_SERVICE========CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "165.28.239.30"
Caller Port........... 8086
Universal Resource Id. "/sap/bc/webdynpro/sap/zvmkc_tsvm_main/"
Information on where terminated
Termination occurred in the ABAP program "CL_WDY_RG_META_SERVICE========CP" -
in "CONTROLLER_KIND_TO_TEXT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 20
of the (Include) program "CL_WDY_RG_META_SERVICE========CM001".
Source Code Extract
Line
SourceCde
1
method CONTROLLER_KIND_TO_TEXT .
2
3
data:
4
cref_View type ref to cl_wdy_md_view,
5
ctlr_Type type Wdy_Md_Controller_Type.
6
7
ctlr_Type = controller->get_type( ).
8
9
case ctlr_Type.
10
11
when wdyn_ctlr_type_custom.
12
controller_type_as_text = 'CUSTOM'.
13
14
when wdyn_ctlr_type_view.
15
controller_type_as_text = 'VIEW'.
16
if ( ABAP_FALSE eq Controller->Has_View( ) ).
17
" view controller must have a view
18
gi_Cx_Text = Controller->Get_Name( ).
19
gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
>>>>>
raise exception type Cx_Wdy_Rg_Md
21
exporting
22
TextId =     Cx_Wdy_Rg_Md=>Controller_Data
23
Controller = gi_Cx_Text
24
Reason =     gi_Cx_Hint.
25
26
else.
27
gi_Cx_Text = Controller->Get_Name( ).
28
if ( gi_Cx_Text eq 'EMPTYVIEW' ).
29
return.
30
endif.
31
32
" sanity check against illegal CL_WDY_MD_EMPTY_VIEW
33
try.
34
cref_View ?= Controller->Get_View( ).
35
if ( cref_View is initial ).
36
gi_Cx_Text = Controller->Get_Name( ).
37
gi_Cx_Hint = '"View Controller" enthält keine "View"'(NVW).
38
raise exception type CX_Wdy_Rg_Md
39
exporting
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
2
SY-DBCNT
0
SY-FDPOS
7
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
HTTP Control
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070222
SY-UZEIT
222514
SY-XPROG
SY-XFORM
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
22 METHOD       CL_WDY_RG_META_SERVICE========CP    CL_WDY_RG_META_SERVICE========CM001    20
CL_WDY_RG_META_SERVICE=>CONTROLLER_KIND_TO_TEXT
21 METHOD       CL_WDY_RG_CONTROLLER==========CP    CL_WDY_RG_CONTROLLER==========CM001    25
CL_WDY_RG_CONTROLLER=>CONSTRUCTOR
20 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11            684
LCL_SAVE_REPOSITORY=>GET_CONTROLLER_PARTS
19 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             91
LCL_SAVE_REPOSITORY=>SAVE_COMPONENT
18 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF11             29
LCL_SAVE_REPOSITORY=>SAVE
17 FUNCTION     SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYU02             27
WDR_SAVE_REPOSITORY
16 METHOD       CL_WDR_RR_DB==================CP    CL_WDR_RR_DB==================CM002     3
CL_WDR_RR_DB=>SAVE
15 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU04        279
WDY_WB_GENERATE_INTERNAL
14 FUNCTION     SAPLWDY_WB_ACTIVATION_SERVICES      LWDY_WB_ACTIVATION_SERVICESU01         84
WDY_WB_GENERATE
13 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF12             77
LCL_REPOSITORY=>CONSTRUCTOR
12 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01             17
LCL_COMPONENT=>CONSTRUCTOR
11 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            669
LCL_COMPONENT=>IF_WDR_RR_COMPONENT~GET_USED_COMPONENT
10 METHOD       SAPLWDR_RUNTIME_REPOSITORY          LWDR_RUNTIME_REPOSITORYF01            245
LCL_COMPONENT=>IF_WDR_RR_COMPONENT~CREATE_COMPONENT_USAGE
9 METHOD       CL_WDR_MESSAGE_WINDOW=========CP    CL_WDR_MESSAGE_WINDOW=========CM001    30
CL_WDR_MESSAGE_WINDOW=>CONSTRUCTOR
8 METHOD       CL_WDR_APPLICATION_WINDOW=====CP    CL_WDR_APPLICATION_WINDOW=====CM00K     6
CL_WDR_APPLICATION_WINDOW=>INITIALIZE
7 METHOD       CL_WDR_CLIENT_COMPONENT=======CP    CL_WDR_CLIENT_COMPONENT=======CM004    59
CL_WDR_CLIENT_COMPONENT=>DISPLAY_TOPLEVEL_COMPONENT
6 METHOD       CL_WDR_CLIENT_APPLICATION=====CP    CL_WDR_CLIENT_APPLICATION=====CM00L    30
CL_WDR_CLIENT_APPLICATION=>INIT
5 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    40
CL_WDR_MAIN_TASK=>EXECUTE
4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    69
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM00I   524
CL_HTTP_SERVER=>EXECUTE_REQUEST
2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                      929
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
%_HTTP_START

Hi Kim,
Please try the following:
Try to reactivate the component
If this does not help, please create an OSS ticket and the SAP colleagues will help you to fix the problem. Please add exact information about the component and open a connection to your system.
Ciao, Regina

File Write In Batches Is Not Consistent.

Similar Messages

Maybe you are looking for