File *.xml Reading From Directory

Hi Friends
I want to read only *.xml (only File name not Contain)From Particular Directory and Store into a collection
like
File fileSel = new File("../../tomcat/webapps/examples/");
From this I can reach upto Directory Now i want to read File Name with *.xml Extension Only
u can mail me at : [email protected]
Thanks in Advance
Bye
Tabs

Something like this should work:
public class MyFilter implements FilenameFilter {
    public boolean accept(File dir, String name) {
            return name.toLowerCase().endsWith(".xml");
}Col

Similar Messages

  • Read an avi file using "Read from binary file" vi

    My question is how to read an avi file using "Read from binary file" vi .
    My objective is to create a series of small avi files by using IMAQ AVI write frame with mpeg-4 codec of 2 second long (so 40 frames in each file with 20 fps ) and then send them one by one so as to create a stream of video. The image are grabbed from USB camera. If I read those frames using IMAQ AVI read frame then compression advantage would be lost so I want to read the whole file itself.
    I read the avi file using "Read from binary file" with unsigned 8 bit data format and then sent to remote end and save it and then display it, however it didnt work. I later found that if I read an image file using "Read from binary file" with unsigned 8 bit data format and save it in local computer itself , the format would be changed and it would be unrecognizable. Am I doing wrong by reading the file in unsined 8 bit integer format or should I have used any other data types.
    I am using Labview 8.5 and Labview vision development module and vision acquisition module 8.5
    Your help would be highly appreciated.
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    read avi file in other data format.JPG ‏26 KB

    Hello,
    Check out the (full) help message for "write to binary file"
    The "prepend array or string size" input defaults to true, so in your example the data written to the file will have array size information added at the beginning and your output file will be (four bytes) longer than your input file. Wire a False constant to "prepend array or string size" to prevent this happening.
    Rod.
    Message Edited by Rod on 10-14-2008 02:43 PM

  • 求助: 如何使用write to spreadsheet file.vi 和 read from spreadsheet file.vi, 并且如何定义它们的路径???

    请问如何使用write to spreadsheet file.vi 和 read from spreadsheet file.vi,我知道spreadsheet file.vi只支持.txt文件,但我应该在哪里设置它们的路径呢,请各位帮忙指点,能不能具体说明下,谢谢...

    write to spreadsheet file.vi 和 read from spreadsheet file.vi,支持.xls文件.
    可以在path处设置它们的路径.

  • Limited file reading from directory

    Hi,
    I am reading all files from directory.........i,e
    File orgf = new File("E:/ImageProject/ImageDir/");
    String[] OrgFile     =     orgf.list();
    It returns all files available in ImageDir....but i want to read limited i.e only 5 or 10 files from that direcotry...
    Is there any file function..........i don't want to set limit after reading....all file.............set to limit while reading...........

    No, File orgf = new File("E:/ImageProject/ImageDir/")
    will not read all files in a folder. It doesn't read
    anything.Yes it will read all the files. I tried
    import java.io.*;
    class simple
    public static void main(String arg[])
    File orgf = new File("C:");
    String[] OrgFile = orgf.list();
    for(int i=0; i<OrgFile.length; i++)
    System.out.println(OrgFile);

  • How to open saved files using 'read from text file' function

    Hi everyone, I am having a hard time trying to solve the this particular problem ( probably because I am a newb to lanbview ). Anyway , I am able to save the acquired waveforms by using the 'Write to text file' icon. I did manually modify the block diagram of the 'Write to text file' icon and create the correct number of connector so as to make my program work. But now I have no idea on how to modify the block diagram of the 'Read from text file' block diagram to make my program 'open' my saved waveforms. Or i do not have to modify anything from the block diagram of the 'Read from text file'? Can anyone teach/help me connect up? Do i need the build array on the "open" page?
    Here are some screenshots on part of my program  
    let me know if you guys would need more information / screenshots thank you!
    Attachments:
    ss_save.jpg ‏94 KB
    ss_open.jpg ‏94 KB
    modified_writetotextfile.jpg ‏99 KB

    Ohmy, thanks altenbach. oh yeah i forgot about those sub VIs. will upload them now. Was rather demoralized after reading the comments and really struck me on how weak i'm at on labview really hope to get this done. But of course i have to study through and see how it works. Actually i am going to replace those 'signal generators sub vi' with ThoughtTechonology's sample code so i can obtain data waveforms real-time using Electrocardiography (ECG) ,Electromyography (EMG ) and Electroencephalography (EEG) hopefully i can find out how to connect the sample code.
    ( ps . cant connect it now unless my program is working otherwise labview will crash ) 
    ( p.s.s the encoder of my biofeedback trainer already acts as an DAQ so i wont need to place an DAQ assistant in my block diagram i suppose )
    The sample code of ThoughtTechnology is named as attachment.ashx.vi. too bad i cant use it and present it as my project
    Attachments:
    frequency detactor.vi ‏53 KB
    signal generator.vi ‏13 KB
    attachment.ashx.vi ‏40 KB

  • How do I add a txt file to read from in the following script

    First thanks for the help, PS newbie. 
    I need to add a txt file that has the Exchange aliases listed to the below file. So if the .txt file is sitting in c:\temp\readme.txt how do I incorporate into the following script. Given, I only want the outcome to read from only the txt file. 
    $mailboxes = Get-Mailbox -RecipientTypeDetails UserMailbox
    ForEach ($mailbox in $mailboxes) {
      $FilePath = "\\server\folder\" + $mailbox.PrimarySmtpAddress.Local + "@" + $mailbox.PrimarySmtpAddress.Domain + ".pst"
      New-MailboxExportRequest -mailbox $mailbox -FilePath $FilePath
    Thank you for your time. 
    Chris

    Thank you - 
    You're welcome.
    I need to make sure that when the user from the list is exported to .pst it is named with their primary smtp address? Will the above code do so?
    No, it won't. This adjustment will take that into account:
    $aliasList = Get-Content .\aliasList.txt
    foreach ($alias in $aliasList) {
    $mbx = Get-Mailbox $alias
    $filePath = "\\server\folder\$($mbx.PrimarySmtpAddress).pst"
    New-MailboxExportRequest -Mailbox $alias -FilePath $filePath -WhatIf
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Can I include a text file to read from within java?

    I have a config file I need to read within a java program called config.xml.
    I want to reference this document, but don't now how to without using '..new(File("config.xml"))' and this forces me to put it in a directory somewhere.
    I just want to reference it from a jar file. For example, if I put it in a jar called config.jar, and added that to my CP - how do I reference it?
    THanks

    Great - thanks.
    One more question - Is configs in this case a java package that I would inlclude with my other packages?
    For example, my main package is: main - it contains several packages with all my code. - I created a new folder in my Jbuilder environment in the same directory as the main package - called in configs - then put the config.xml file in there. If I add the package configs - it doesn't show the conifg.xml within the tree viewer of Jbuilder...do I need to put a package identification at the top of the XML file like in Java - somehting like package main.configs?
    THanks, again

  • Where do php files get read from locally?

    i've installed and tested php on 10.3.9 and it works. i'd like to parse my php files locally. i believe on older os vesions it was the 'sites' folder, but it doesn't seem to work now. where can i place my web files to test? do i have to move everything to library/apache2/htdocs?
    thank you!

    i am not running apache2 at the moment, but i am assuming the problem could result from the fact that mod_userdir.so (or its apache2 equivalent) is not enabled in your apache install, nor are your config files setup to point to the sites folder of your $HOME. for apache 1.3.x, the config file should contain something like the following after enabling mod_userdir.so. this would be particularly true if you compiled from source.
    # UserDir: The name of the directory which is appended onto a user's home
    # directory if a ~user request is received.
    <IfModule mod_userdir.c>
    UserDir Sites
    </IfModule>
    assuming you have also added the .php and .phps file types (and whatever else you want), this should get you setup.
    again - a bit of a disclaimer - i am not currently running apache2.
    -b
    DP867 MDD and 12 1Ghz PB    

  • Get the File information(data) from Directory AL11.

    Hi Friends,
    I want to get the file data from the given particular directory(which maintained in AL11) in the selection screen.
    for listing the files from the directory, i used FM 'RZL_READ_DIR_LOCAL'. it displaying only files what ever in the given directory.
    But my requirement is to display the complete data in the file ( log file contents).
    please suggest me with relevant Function module or logic.
    Thank you.
    Regards
    Ramesh M

    HI,
    Try using function module:
    PARAMETERS:     p_fname    LIKE rlgrap-filename               .
    data l_path       TYPE dxlpath       .
    DATA: l_true       TYPE btch0000-char1.
    *-- F4 functionality for filename on Application Server
      CALL FUNCTION '/SAPDMC/LSM_F4_SERVER_FILE'
        EXPORTING
          directory        = '/usr/sap/input'
          filemask         = ''
        IMPORTING
          serverfile       = l_path
        EXCEPTIONS
          canceled_by_user = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        p_fname = l_path.  ""Here p_fname is the parameter for the user to select the file from the application server
      ENDIF.
    PFL_CHECK_OS_FILE_EXISTENCE
      DATA: l_file       TYPE tpfht-pffile.
      CLEAR l_file.
      l_file = p_fname.    "Here p_fname is the parameter for the user to select the file from the application server
      CALL FUNCTION 'PFL_CHECK_OS_FILE_EXISTENCE'
        EXPORTING
          fully_qualified_filename = l_file
        IMPORTING
          file_exists              = l_true.
      IF l_true = space.
        MESSAGE e001(zmsg).
      ENDIF.
    Hope it helps
    Regards
    Mansi

  • Writing to a file and Reading from it "AT THE SAME TIME"

    Hello,
    If you have a vi (vi 1) that is generating and storing data to a file. Is it possible to write ANOTHER vi (vi 2) that reads & plots the data located at the same file (BTW, vi 1 will still store data to the file while vi 2 is reading the data)
    All I am trying to do is to plot data that is generated from a different vi (vi 1) somewhat in "real time". Unfortunately, I cannot access the vi (vi 1) that is generating the data and add a diagram to it. I have to build my own separate vi (vi 2).  Is this possible?
    Thanks in advance

    Once you open the file, you can't access it again until the original reference is closed. You might want to look at a functional global architecture. You use a case structure to determine how to access the data. Initialize, write, read, save are common examples of sections inside the functional global.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/D2​E196C7416F373A862568690074C759

  • How to get the name of file was read from file adapter ?

    Hello!
    I make a pooling into one directory to read all *.fat files in this directory, and I want the name of this file
    is it possible ?
    God bless all!

    it is mentioned in the sample code.. look at the pdf guide inthe sample code document for file adapter.
    you need to define a variable of message type of the file adapter inbound header message type and assign the variable to the apapters tab in the receive activity..
    the variable will have file name now

  • How can we locate the property file and read from it in .js page?

    HI
    I am having an static html page where in the url is hardcoded,so i wanted to read it from a property file and which can be done by using .js files
    i wanted to know how to deal with property files in .js?
    Thankx

    I assume you know that Java and JavaScript only share a name and they are both programming languages but little else.
    You can load JavaScript in Java 6. However for questions on what the JavaScript should do I suggest you try a javascript forum.

  • File-Sender Adapter File not read from folder

    Hi everybody,
    in CC monitoring I see that the adapter poll successful on a folder. But the file is not read! The mode is "delete"
    Any ideas?
    Regards Mario

    hi mario,
    is ur CC "green" in Adapter monitoring?
    generally wen the file is polled but bot deleted this is the problem with authorization for deletion for that destination n we c "red" in CC monitoring.
    but this case doznt ensure that ur scenario hasnt run. the scenario may still be successful and the problem may be only with deleting the file.
    regards,
    latika.

  • 求助: 还是一个如何使用write to spreadsheet file.vi 和 read from spreadsheet file.vi, 并且如何定义它们的路径的问题???

    在定义路径时有两个路径框,一个是FILE PATH,另一个是NEW FILE PATH,请问我应该定义哪个呢???定义好后就可以直接往spreadsheet file.vi中存储和读取记录了吗???还需要再做任何其它的工作吗???谢谢...

    定义file path就可以了，new file path 是这个VI的输出

  • Load XML file to XMLTable from FTP site Problem Oracle9i Release 9.2.0.7.

    Hi,
    I was wondering if it is possible to load XML file from FTP address directly to XMLType Table?
    Can someone help me?
    For example I have ftp site "ftp://test" and on this site I have file "file.xml"
    and I would like to load "file.xml" to table "xml_tab" ?
    I tried to use "load_xml" procedure and set DIRECTORY "xml_dir" to 'ftp://test' but I get this error
    exec load_xml(p_dir=>'XML_DIR', p_filename=>'file.xml');
    ERROR at line 1:
    ORA-22288: file or LOB operation FILEOPEN failed
    The network path was not found.
    ORA-06512: at "SYS.DBMS_LOB", line 504
    ORA-06512: at "P.LOAD_XML", line 8
    ORA-06512: at line 1
    Procedure looks like this:
    (p_dir IN VARCHAR2,
    p_filename IN VARCHAR2) AS
    l_bfile BFILE := BFILENAME(p_dir, p_filename);
    l_clob CLOB;
    BEGIN
    DBMS_LOB.createtemporary (l_clob, TRUE);
    DBMS_LOB.fileopen(l_bfile, DBMS_LOB.file_readonly);
    DBMS_LOB.loadfromfile(l_clob, l_bfile, DBMS_LOB.getlength(l_bfile));
    DBMS_LOB.fileclose(l_bfile);
    INSERT INTO xml_tab (
    id,
    filename,
    xml
    VALUES (
    xml_tab_seq.NEXTVAL,
    p_filename,
    XMLTYPE.createXML(l_clob)
    COMMIT;
    DBMS_LOB.freetemporary (l_clob);
    END;
    I have tried also with this
    select xdburitype('ftp://test/file.xml').getCLob() from dual;
    but i get error
    ERROR:
    ORA-31001: Invalid resource handle or path name "ftp://test/file.xml"
    Can you pleeeeeeas show me a way to do this, thanks ???

    This will not work.. Ypu cannot use FTP to 'PULL' a document into the database. (Yes I know there's a placeholder for an FTPURITYPE() but it was never implemented).
    However you can use an FTP client to PUSH content into the XML DB repository. If the content is schema based XML associated with a known (registered) XML schema the content of the file will automatically be stored in the default table associated with the root element of the file. If the content is not associated with an known XML schema you can then use xdburitype to read the resource that was created when the document was uploaded into the repository

Maybe you are looking for