FileReference: event fires after delay
Hi,
We have the following case: server immediatelly returns error
code to client if request size more than allowed.
In this case 'onProgress' event continues to process
uploading, but 'onComplete' or 'onHTTPError' event fires with delay
in several seconds.
It seems that fileReference starts to process response from
server only after full file has been posted to server. As more file
size - then longer delay occurs.
Can somebody explain how we can immediatlly cancel uploading
from server-side?
Environment: FF,IE, Safari. Flash 9.
Thanks in advance for any response.
Hello,
thank you for your answer so far. Well, here is a trivial source code with the problem that still exists (see also my text at the end of this post). This one has been tested using Java 2 SDK V1.4, even using the newest SDK version did not change anything on the behaviour:
import javax.swing.*;
import java.awt.Container;
import java.awt.FlowLayout;
import java.awt.event.ActionListener;
import java.awt.event.ActionEvent;
* JComboBox-Test: using Java 2 SDK V1.4, ActionEvent is only fired by combobox, if
* a different item than the previous one is selected from combobox;
public class Forum3 extends JFrame implements ActionListener {
String[] CB_ITEMS = {
"item 1",
"item 2",
"item 3",
public Forum3 () {
super();
setDefaultCloseOperation(EXIT_ON_CLOSE);
setLayout(new FlowLayout());
JComboBox cb = new JComboBox(CB_ITEMS);
cb.addActionListener(this);
getContentPane().add(cb);
public void actionPerformed (ActionEvent e) {
System.out.println("action!");
public static void main (String[] argv) {
Forum3 test = new Forum3();
test.setSize(300,200);
test.setVisible(true);
}If you start this program (I am also using Windows XP), you see the JFrame window including the JComboBox. "item 1" is selected by default. If you click again on "item 1", no event will be fired. An event will be fired only, if you choose "item 2" or "item 3". You can try this with any other of the given items. An event will be only fired, if you choose a different item than the last one.
What I need, is a routine that fires an event each time any item is selected!
I would be grateful for a helpful hint, how to solve this in a "clean" way :-)
Similar Messages
-
Fire event receiver after update list items with PowerShell
Hi,
I have a list with a event receiver attached to it. Also I have a PowerShell script which updates some elements. I noticed that the Event Receiver is not firing after the PowerShell script runs. Is there any way to make it happen?
Thanks anyway!Hi,
According to your description, my understanding is that the event receiver not fire after you update the item elements.
I suggest you can create a simple event receiver and then test if the event receiver fire after PowerShell run.
Here is my PowerShell script:
$spWeb = Get-SPWeb -Identity http://sp2013sps/sites/test
$spList = $spWeb.Lists["Documents"]
$spItem = $spList.GetItemById(14)
$spItem["Title"] = "Test111"
$spItem.Update()
Here is my event receiver code:
public override void ItemUpdated(SPItemEventProperties properties)
base.ItemUpdated(properties);
Console.WriteLine("event receiver has been done");
After the PowerShell run, it will come out the result:
It means the event receiver has been fired.
Here is a detailed article for your reference:
http://blogs.technet.com/b/speschka/archive/2009/12/25/debugging-event-receivers-in-sharepoint-2010.aspx
Thanks
Best Regards
Jerry Guo
TechNet Community Support -
Fire an event automatically after reading line from file
Hi all
I am writing a programe in which i need to fire an event automatically after reading each line (i.e. on every EOL) from the file.
Thanks
jonjonhill wrote:
..I am writing a programe in which i need to fire an event automatically after reading each line (i.e. on every EOL) from the file.Thanks for sharing that with us. Let us know how it goes. If you have any questions, feel free to ask them.
BTW - sounds like a very weird requirement. -
ItemEditEnd hell - event fires gazillion times
Well I was making great progress with my first major flex app when I hit a wall. The last element I put in place was to enable user to edit one column in a datagrid. Before I send the changes back to a web service I thought I would confirm that it is firing correctly and passing correct values. To my surprise the event fires over and over again. I believe its something to do with the use of the accordian and multiple canvases. Sorry but this is happening on both flex 3 and 4 platforms (its worse in 4 for some reason). I have not had a chance to scale down the project and simply it so apologies if the code is lenghty.
Any ideas how to solve this?
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
creationPolicy= "all">
<fx:Declarations>
<mx:WebService
id="nwCL2"
wsdl="http://finance-web/BannerWebServices/BannerService.asmx?WSDL">
<mx:operation name="FetchRequestAsTableToArray"
resultFormat="object"
showBusyCursor="true"
result="resultHandler(event)"
fault="onFault(event)">
<mx:request>
<IncRecItems>{IncRecItems}</IncRecItems>
<PmyGUID>{myGUID}</PmyGUID>
<AgeItems>{AgeItems}</AgeItems>
</mx:request>
</mx:operation>
</mx:WebService>
<mx:WebService
id="nwCL3"
wsdl="http://finance-web/BannerWebServices/BannerService.asmx?WSDL">
<mx:operation name="FetchDirectPOAsTableToArray"
resultFormat="object"
showBusyCursor="true"
result="resultHandler3(event)"
fault="onFault(event)">
<mx:request>
<IncRecItems>{IncRecItems}</IncRecItems>
<AgeItems>{AgeItems2}</AgeItems>
<PmyGUID>{myGUID}</PmyGUID>
</mx:request>
</mx:operation>
</mx:WebService>
<mx:WebService
id="nwCL4"
wsdl="http://finance-web/BannerWebServices/BannerService.asmx?WSDL">
<mx:operation name="FetchDirectPODELAsTableToArray"
resultFormat="object"
showBusyCursor="true"
result="resultHandler4(event)"
fault="onFault(event)">
<mx:request>
<PmyGUID>{myGUID}</PmyGUID>
</mx:request>
</mx:operation>
</mx:WebService>
<mx:WebService
id="nwCL5"
wsdl="http://finance-web/BannerWebServices/BannerService.asmx?WSDL">
<mx:operation name="SendMailMessage"
resultFormat="object"
showBusyCursor="true"
result="resultHandler5(event)"
fault="onFault(event)">
<mx:request>
<PmyGUID>{myGUID}</PmyGUID>
<from>
{from}
</from>
<recepient>
{recepient}
</recepient>
<bcc>
{bcc}
</bcc>
<cc>
{cc}
</cc>
<subject>
{subject}
</subject>
<body>
{myEmailBody}
</body>
<CallProc>
{CallProc}
</CallProc>
</mx:request>
</mx:operation>
</mx:WebService>
<mx:WebService
id="nwCL6"
wsdl="http://finance-web/BannerWebServices/BannerService.asmx?WSDL">
<mx:operation name="InsRecordFYPOAUD"
resultFormat="object"
showBusyCursor="true"
result="resultHandler6(event)"
fault="onFault(event)">
<mx:request>
<PmyGUID>{myGUID}</PmyGUID>
<myuserID>{myuserID}</myuserID>
<DocCode>{DocCode}</DocCode>
</mx:request>
</mx:operation>
<mx:operation name="DelRecordFYPOAUD"
resultFormat="object"
showBusyCursor="true"
result="resultHandler6(event)"
fault="onFault(event)">
<mx:request>
<PmyGUID>{myGUID}</PmyGUID>
<DocCode>{DocCode}</DocCode>
</mx:request>
</mx:operation>
<mx:operation name="FetchUserID"
resultFormat="object"
showBusyCursor="true"
result="resultHandler7(event)"
fault="onFault(event)">
<mx:request>
<PmyGUID>{myGUID}</PmyGUID>
</mx:request>
</mx:operation>
<mx:operation name="InsGUIDAudit"
resultFormat="object"
showBusyCursor="true"
result="resultHandler8(event)"
fault="onFault(event)">
<mx:request>
<PmyGUID>{myGUID}</PmyGUID>
</mx:request>
</mx:operation>
</mx:WebService>
</fx:Declarations>
<fx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.collections.IViewCursor;
import mx.controls.Alert;
import mx.controls.ToolTip;
import mx.controls.dataGridClasses.DataGridColumn;
import mx.controls.dataGridClasses.DataGridItemRenderer;
import mx.core.mx_internal;
import mx.events.DataGridEvent;
import mx.events.ListEvent;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
//added after upgrading to flex 4
import mx.core.FlexGlobals;
import mx.controls.RichTextEditor
//import flash.events.Event;
[Bindable] public var IncRecItems:String;
[Bindable] public var myGUID:String;
[Bindable] public var myData:ArrayCollection;
[Bindable]public var serverData:ArrayCollection;
[Bindable]public var serverData3:ArrayCollection;
[Bindable]public var serverData4:ArrayCollection;
[Bindable]public var serverData5:ArrayCollection;
[Bindable] public var IncRecItems3:String;
[Bindable] public var from:String;
[Bindable] public var recepient:String;
[Bindable] public var bcc:String;
[Bindable] public var cc:String;
[Bindable] public var subject:String;
[Bindable] public var body:String;
[Bindable] public var CallProc:String;
[Bindable] public var myEmailBody:String;
[Bindable] public var myuserID:String;
[Bindable] public var DocCode:String;
[Bindable] public var AgeItems:String;
[Bindable] public var AgeItems2:String;
[Bindable] public var DocItem:Number;
[Bindable] public var DocText:String;
//this adds event listener for mouse over event so I can display descriptive text about various columns values
//POFromRequest.addEventListener(ListEvent.ITEM_ROLL_OVER, declarePosition);
//USE ROLLOVER VERSUS MOUSEOVER EVENT AS THE LATTER CAUSES BLINKING
private function createToolTip(event:ListEvent):void {
//var col:DataGridColumn = POFromRequest.columns[event.columnIndex];
//var newValue:String = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[col.dataField];
//Alert.show("You are hovering over:" +newValue);
if (event.columnIndex==13)
var str:String = "P-Y=Paid and Completed" + "\r" + "O-Y=Open and Completed" + "\r" + "O-R=Open and Unmatched" ;
//this code works and will fetch active mouse over datagrid values!
var col:DataGridColumn = POFromRequest.columns[event.columnIndex];
var newValue:String = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[col.dataField];
//Alert.show("You are hovering over:" +newValue);
else if (event.columnIndex==21||event.columnIndex==22)
var col21:DataGridColumn = POFromRequest.columns[21];
var col22:DataGridColumn = POFromRequest.columns[22];
var Value21:Number = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[col21.dataField];
var Value22:Number = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[col22.dataField];
//21=Bal not Rec(BNR);22=Bal not Inv(BNI)
//evaluate BNR/BNI and give approp message which represents
//action required by end user (ie they don't have to think!)
var str:String
if (Value21>0 && Value22<=0)
str = "Case1:All invoices sent to AP but we are missing a receiving. Please contact receiving.";
else if(Value21>0 && Value22>0)
str = "Case2:We are missing invoices and receiving. Please contact both departments ASAP.";
else if(Value21<=0 && Value22>0)
str = "Case3:All receiving completed but we are missing invoices. Please contact AP and forward any invoices to them ASAP.";
else if(Value21==0 && Value22==0)
str = "Case4:All documents received. No action required. You can hide these items by clicking/turning off the box:Include Balance of 0 Items? ";
//var str:String = Value21.toString()+Value22.toString()
else
//var str:String = "Row :" +event.rowIndex + "Column : " +event.columnIndex;
POFromRequest.toolTip = str;
private function deleteToolTip(obj:Object):void {
POFromRequest.toolTip = null;
//start mouse over code for directPO datagrid
private function createToolTip2(event:ListEvent):void {
//var col:DataGridColumn = DirectPOGrid.columns[event.columnIndex];
//var newValue:String = ArrayCollection(DirectPOGrid.dataProvider).getItemAt(event.rowIndex)[col.dataField];
//Alert.show("You are hovering over:" +newValue);
if (event.columnIndex==1)
var str:String = "If you know for sure that this item is not yours then highlight item by left clicking, then hit the delete button below. Hold the ctrl key to select multiple items." ;
if (event.columnIndex==12)
var str:String = "P-Y=Paid and Completed" + "\r" + "O-Y=Open and Completed" + "\r" + "O-R=Open and Unmatched" ;
//this code works and will fetch active mouse over datagrid values!
var col:DataGridColumn = DirectPOGrid.columns[event.columnIndex];
var newValue:String = ArrayCollection(DirectPOGrid.dataProvider).getItemAt(event.rowIndex)[col.dataField];
//Alert.show("You are hovering over:" +newValue);
else if (event.columnIndex==20||event.columnIndex==21)
var col20:DataGridColumn = DirectPOGrid.columns[20];
var col21:DataGridColumn = DirectPOGrid.columns[21];
var Value20:Number = ArrayCollection(DirectPOGrid.dataProvider).getItemAt(event.rowIndex)[col20.dataField];
var Value21:Number = ArrayCollection(DirectPOGrid.dataProvider).getItemAt(event.rowIndex)[col21.dataField];
//21=Bal not Rec(BNR);22=Bal not Inv(BNI)
//evaluate BNR/BNI and give approp message which represents
//action required by end user (ie they don't have to think!)
var str:String
if (Value20>0 && Value21<=0)
str = "Case1:All invoices sent to AP but we are missing a receiving. Please contact receiving.";
else if(Value20>0 && Value21>0)
str = "Case2:We are missing invoices and receiving. Please contact both departments ASAP.";
else if(Value20<=0 && Value21>0)
str = "Case3:All receiving completed but we are missing invoices. Please contact AP and forward any invoices to them ASAP.";
else if(Value20==0 && Value21==0)
str = "Case4:All documents received. No action required. You can hide these items by clicking/turning off the box:Include Balance of 0 Items? ";
//var str:String = Value21.toString()+Value22.toString()
else
//var str:String = "Row :" +event.rowIndex + "Column : " +event.columnIndex;
DirectPOGrid.toolTip = str;
private function deleteToolTip2(obj:Object):void {
DirectPOGrid.toolTip = null;
//end tool tip code
private function GetData():void
//IncRecItems = "Y"
//IncRecItems = "Y"
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
//var MyurlParams:Dictionary = new Dictionary();
//MyurlParams = getUrlParamaters();
//myGUID = MyurlParams['myGUID'];
nwCL2.FetchRequestAsTableToArray.send();
private function GetData3():void
//IncRecItems = "Y"
//IncRecItems = "Y"
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
var MyurlParams:Dictionary = new Dictionary();
MyurlParams = getUrlParamaters();
myGUID = MyurlParams['myGUID'];
nwCL3.FetchDirectPOAsTableToArray.send();
NotifyDel();
private function GetData4():void
//IncRecItems = "Y"
//IncRecItems = "Y"
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
var MyurlParams:Dictionary = new Dictionary();
MyurlParams = getUrlParamaters();
myGUID = MyurlParams['myGUID'];
nwCL4.FetchDirectPODELAsTableToArray.send();
NotifyStatus();
public function resultHandler(event:ResultEvent):void {
serverData = new ArrayCollection(event.result.source);
// Alert.show("getdata fired");
public function resultHandler3(event:ResultEvent):void {
serverData3 = new ArrayCollection(event.result.source);
// Alert.show("getdata fired");
public function resultHandler4(event:ResultEvent):void {
serverData4 = new ArrayCollection(event.result.source);
// Alert.show("getdata fired");
public function resultHandler5(event:ResultEvent):void {
var FunctionResult:String=event.result.toString();
var Response:String;
if(FunctionResult != "Success")
Alert.show("A problem has occurred. " + FunctionResult);
else
Alert.show("The email was sent successfully.");
// Alert.show("getdata fired");
public function resultHandler6(event:ResultEvent):void {
var FunctionResult:String=event.result.toString();
var Response:String;
if(FunctionResult != "Success")
Alert.show("A problem has occurred. " + FunctionResult);
else
Alert.show("Item moved.");
//refresh both datagrids for deleted/ins records
//need to call diff proc which does the same but does not show the initial message box
ReloadTables()
public function resultHandler7(event:ResultEvent):void {
var FunctionResult:String=event.result.toString();
if(FunctionResult == "Invalid GUID")
Alert.show("A problem has occurred. " + FunctionResult);
else
myuserID = FunctionResult;
myGlobVar.globMyUserID = FunctionResult;
public function resultHandler8(event:ResultEvent):void {
//we don't really care about handling this event
var FunctionResult:String=event.result.toString();
if(FunctionResult == "Invalid GUID")
Alert.show("A problem has occurred. " + FunctionResult);
else
//myuserID = FunctionResult;
private function initApp():void
//code for grabing guid passed from .net ldap authentication page
//this file is located on finance-web box along with guid database.
//the web service is also located on finance-web
//and flex source code is on box fin-selement3 but is saved to U and published to finance-web
//(this is because flex is installed on fin-selement3 only
//GurfeedTbl = nwCL.FetchFTVACCTAsTable();
flash.system.Security.allowDomain("*");flash.system.Security.allowInsecureDomain("*");
//siteData.send();
//trace("Hello from Flex Debugging!");
//Alert.show("Init app fired");
//first get focus of email tab (if we don't then a bug exists;error on object creation)
//I have tried various techniques for some reason I can't load back to base 0
//ac.selectedIndex = 3;
//Alert.show("Please remember to audit documents on all tabssss!");
//ac.selectedIndex = 1;
Alert.show("HardCoded GUID in place. Remove after testing")
myGUID = "c25ef14a-bff4-4e07-bfa5-f9c0725c3fd0";
//need to set initial value
AgeItems = "N";
AgeItems2 = "N";
myBody.text = "Body";
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
//var MyurlParams:Dictionary = new Dictionary();
//MyurlParams = getUrlParamaters();
//myGUID = MyurlParams['myGUID'];
//Alert.show("HardCoded GUID in place. Remove after testing")
//myGUID = "c25ef14a-bff4-4e07-bfa5-f9c0725c3fd0";
//insert audit trail record
nwCL6.InsGUIDAudit.send();
nwCL6.FetchUserID.send(); //for some reason when this was located inside the proc it was called from it would not
//set the global variable until after it was required resulting in null error
//myGlobVar.globMyUserID = myUserID ;
//Alert.show
private function checkBoxZero_change(evt:Event):void {
if(checkBoxZero.selected == true) IncRecItems = "Y" else IncRecItems ="N";
//Alert.show(IncRecItems.toString())
GetData() ;
private function checkBoxAge_change(evt:Event):void {
//if(checkBoxAge.selected == true) AgeItems = "Y" else AgeItems ="N";
if(checkBoxAge.selected == true) AgeItems = "N" else AgeItems ="Y";
GetData() ;
private function checkBoxAge2_change(evt:Event):void {
//if(checkBoxAge.selected == true) AgeItems = "Y" else AgeItems ="N";
if(checkBoxAge2.selected == true) AgeItems2 = "N" else AgeItems2 ="Y";
GetData3() ;
private function checkBoxZero3_change(evt:Event):void {
if(checkBoxZero3.selected == true) IncRecItems3 = "Y" else IncRecItems3 ="N";
//Alert.show(IncRecItems.toString())
GetData3() ;
private function onFault(event:FaultEvent):void {
Alert.show(event.fault.toString());
private function RemoveItems():void {
var selectedItems:Array = DirectPOGrid.selectedItems;
var listItem:Object;
if (selectedItems.length < 1)
Alert.show("You did not highlight any items. Highlight items by left clicking the mouse. To select multiple items, hold the ctrl key down while left clicking.");
//nwCL6.FetchUserID.send();
for (var i:int = 0; i < selectedItems.length; i++)
listItem = selectedItems[i];
//DirectPOGrid.removeItem(listItem);
//TargetList.addItem(listItem);
//var newValue:String = ArrayCollection("selectedItems").getItemAt(i)["PO"];
var newValue:String = listItem["PO"].toString()
//Alert.show(newValue);
DocCode = listItem["PO"].toString()
//call proc to set userid was not working here as it was getting fired after so I moved it to initapp
//nwCL6.FetchUserID.send();
myuserID = myGlobVar.globMyUserID;
//myUserID = 'testuser';
nwCL6.InsRecordFYPOAUD.send();
//Alert.show("doc:"+DocCode+" guid:"+myGUID+"user:"+myGlobVar.globMyUserID);
//Alert.show(selectedItems[i][PO].toString());
private function RemoveItems4():void {
var selectedItems:Array = DirectPOGridNotMine.selectedItems;
var listItem:Object;
if (selectedItems.length < 1)
Alert.show("You did not highlight any items. Highlight items by left clicking the mouse. To select multiple items, hold the ctrl key down while left clicking.");
for (var i:int = 0; i < selectedItems.length; i++)
listItem = selectedItems[i];
//DirectPOGrid.removeItem(listItem);
//TargetList.addItem(listItem);
//var newValue:String = ArrayCollection("selectedItems").getItemAt(i)["PO"];
var newValue:String = listItem["PO"].toString()
//Alert.show(newValue);
//Alert.show(selectedItems[i][PO].toString());
DocCode = listItem["PO"].toString()
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
nwCL6.DelRecordFYPOAUD.send();
private function NotifyDel():void {
Alert.show("These PO's were not created from requests and we are only guessing that they might belong to you. If you don't want to see specific PO's then you can remove them. This is done by highlighting items (left clicking on row), then clicking the delete button below. Hold the ctrl key to select multiple items.") ;
private function NotifyStatus():void {
Alert.show("These PO's were not created from requests and are displayed here because you have marked them as not belonging to you. If you have accidentally deleted these and they really belong to you then hit the delete button below to reactivate them.") ;
private function POSendEmailAP():void {
var selectedItems:Array = POFromRequest.selectedItems;
var listItem:Object;
var newValue:String;
var ValEmailTO:String = "[email protected],[email protected]";
var myString:String;
var txtBody:String;
var num:int;
if (selectedItems.length < 1)
Alert.show("You did not highlight any items. Highlight items by left clicking the mouse. To select multiple items, hold the ctrl key down while left clicking.");
// emailTO.text = ValEmailTO ;
txtBody = myBody.text.toString()
for (var i:int = 0; i < selectedItems.length; i++)
listItem = selectedItems[i];
//DirectPOGrid.removeItem(listItem);
//TargetList.addItem(listItem);
//var newValue:String = ArrayCollection("selectedItems").getItemAt(i)["PO"];
newValue = listItem["PO"].toString();
//Alert.show(newValue);
emailTO.text = ValEmailTO;
if (emailSUBJECT.text.toString()=="subject")
emailSUBJECT.text = newValue ;
else
if (emailSUBJECT.text.indexOf(newValue,0)<0)//this ensures that we only show distinct PO values
emailSUBJECT.text = emailSUBJECT.text.toString()+"/"+newValue ;
//code for email body
if (txtBody=="Body")
txtBody = "Dear AP/Receiving:" + "\r" + "\r" + "Please note that I have received the following items directly from the vendor(s): " + "\r" + "\r" + listItem["PO"].toString() + " POItem:" + listItem["POItem"].toString() + " " + listItem["CMDDESC"].toString() + " " + "QTYRCVD:" + listItem["BALNOTRECD"].toString() + " ";
else
txtBody = txtBody + "\r" + listItem["PO"].toString() + " POItem:" + listItem["POItem"].toString() + " " + listItem["CMDDESC"].toString() + " " + "QTYRCVD:" + listItem["BALNOTRECD"].toString() + " ";
myBody.text = txtBody;
//public variable for sending body text to email service in correct format
//body = txtBody;
Alert.show("Items copied to email tab.");
POFromRequest.selectedIndex=-1;
private function POSendEmailAPDirectStuff():void {
var selectedItems:Array = DirectPOGrid.selectedItems;
var listItem:Object;
var newValue:String;
var ValEmailTO:String = "[email protected],[email protected]";
var myString:String;
var txtBody:String;
if (selectedItems.length < 1)
Alert.show("You did not highlight any items. Highlight items by left clicking the mouse. To select multiple items, hold the ctrl key down while left clicking.");
// emailTO.text = ValEmailTO ;
txtBody = myBody.text.toString()
for (var i:int = 0; i < selectedItems.length; i++)
listItem = selectedItems[i];
//DirectPOGrid.removeItem(listItem);
//TargetList.addItem(listItem);
//var newValue:String = ArrayCollection("selectedItems").getItemAt(i)["PO"];
newValue = listItem["PO"].toString();
//Alert.show(newValue);
emailTO.text = ValEmailTO;
if (emailSUBJECT.text.toString()=="subject")
emailSUBJECT.text = newValue ;
else
if (emailSUBJECT.text.indexOf(newValue,0)<0)//this ensures that we only show distinct PO values
emailSUBJECT.text = emailSUBJECT.text.toString()+"/"+newValue ;
//code for email body
if (txtBody=="Body")
txtBody = "Dear AP/Receiving:" + "\r" + "\r" + "Please note that I have received the following items directly from the vendor(s): " + "\r" + "\r" + listItem["PO"].toString() + " POItem:" + listItem["POItem"].toString() + " " + listItem["CMDDESC"].toString() + " " + "QTYRCVD:" + listItem["BALNOTRECD"].toString() + " ";
else
txtBody = txtBody + "\r" + listItem["PO"].toString() + " POItem:" + listItem["POItem"].toString() + " " + listItem["CMDDESC"].toString() + " " + "QTYRCVD:" + listItem["BALNOTRECD"].toString() + " ";
myBody.text = txtBody;
Alert.show("Items copied to email tab.");
DirectPOGrid.selectedIndex=-1;
private function ClearEmail():void {
myBody.text = "Body";
emailSUBJECT.text = "Subject";
private function SEmail():void {
//hardcode until we fetch via guid
//Alert.show("Insert code to fetch username from guid. For now its hard coded.");
CallProc = "FLEX"; //This notifies web service so it parses out \r to <p>
//from = "[email protected]"
var MyurlParams:Dictionary = new Dictionary();
MyurlParams = getUrlParamaters();
myGUID = MyurlParams['myGUID'];
//myGUID = "c25ef14a-bff4-4e07-bfa5-f9c0725c3fd0";
//from = myuserID+"@aus.edu";
from = myGlobVar.globMyUserID+"@aus.edu";
recepient = emailTO.text.toString();
cc = emailCC.text.toString();
bcc = "[email protected]"
subject = emailSUBJECT.text.toString();
//var stuffToReplace:RegExp = /\r\n|\n\r/g;
//the key to this function is the /g means global and means to replace ALL instances of search variable!!!
var stuffToReplace:RegExp = /\r/g;
//myEmailBody = myEmailBody.replace("\r","*123");
myEmailBody = myBody.text.replace(stuffToReplace,"*123*");
//myEmailBody = myBody.text.replace("\r","*\r").toString();
//myEmailBody = myBody.text ;
//myEmailBody.replace("\r","*\r");
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
nwCL5.SendMailMessage.send();
private function ReloadTables():void
//myGUID = "d5ef405a-d64a-489f-8583-38dd087de502"
nwCL4.FetchDirectPODELAsTableToArray.send();
nwCL3.FetchDirectPOAsTableToArray.send();
private function getUrlParamaters():Dictionary
var urlParams:Dictionary = new Dictionary();
if (ExternalInterface.available)
var fullUrl:String = ExternalInterface.call('eval', 'document.location.href');
var paramStr:String = fullUrl.split('?')[1];
if (paramStr != null)
var params:Array = paramStr.split('&');
for (var i:int=0; i < params.length; i++)
var kv:Array = params[i].split('=');
urlParams[kv[0]] = kv[1];
else
urlParams = FlexGlobals.topLevelApplication.parameters;
//urlParams = Application.application.parameters;
//urlParams = sparks.components.application.parameters;
return urlParams;
private function RefData(event:DataGridEvent):void {
var dataGrid:DataGrid = event.target as DataGrid;
var dsColumnIndex:Number = event.columnIndex;
var col:DataGridColumn = dataGrid.columns[dsColumnIndex];
var colPO:DataGridColumn = dataGrid.columns[1];
var colPOItem:DataGridColumn = dataGrid.columns[5];
var colNotes:DataGridColumn = dataGrid.columns[23];
var newValue:String = dataGrid.itemEditorInstance[col.editorDataField];
var newValue2:String = dataGrid.itemEditorInstance[colNotes.editorDataField];
var dbval:String;
var dbvalLen:Number;
DocCode = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[colPO.dataField];
DocItem = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[colPOItem.dataField ];
dbval = ArrayCollection(POFromRequest.dataProvider).getItemAt(event.rowIndex)[col.dataField];
if (dbval.length != null)
dbvalLen = dbval.length;
else
dbvalLen = 0;
//Alert.show("key=" +myGlobVar.KeyPress)
if (newValue2.substr(0,3)!='P00') //this is silly code that is necessary until I sort the whole problem of audit note Dec 2010
//When the user hits the tab key the cursor goes to the next line and for some reason assigns PO field value to notes field value
//this line of code ignores in that case
//if (dbval==null && newValue2!=null && newValue2!='')
//if (newValue2!=null || newValue2!='')
//if (newValue2!=null || dbvalLen>=1)
Alert.show("grid value" +DocCode+":"+DocItem+"Notes:"+newValue+"colNotes:"+newValue2+"dbvnotes:"+dbval);
//nwCL6.UpdateFYPOAUD.send();
//tempCnt
//if datagrid edit is true then this will fire
//all the code below is checking if value from datagrid has changed
//as compared to value stored in source data so we don't need this in this project
//var dsFieldName:String = event.dataField;
//var author:VOAuthor = event.itemRenderer.data as VOAuthor;
//if (newValue == author[dsFieldName])
// return;
//get the new value for the first name or last name
//author[dsFieldName] = newValue;
//myRemote.saveData(author);
]]>
</fx:Script>
<mx:Panel title="Auditing of Purchase Order Delivery and Invoicing Status by User:" height="100%" width="100%"
creationComplete="initApp()" paddingTop="5" paddingBottom="5" paddingLeft="5" paddingRight="5" fontSize="15" horizontalAlign="left" color="#701193">
<mx:Accordion id="ac"
width="100%"
height="100%"
selectedIndex="0"
historyManagementEnabled="false" >
<mx:Canvas width="100%" height="400" label="Detailed Data for which a PO was issued from a Request" id="POfromReq" backgroundColor="#D2E9DA" color="#A60831">
<mx:Button click="GetData()" label="Press to load Data" width="305"></mx:Button>
<mx:FormItem label="HeaderWordWrap:" x="335">
<mx:CheckBox id="checkBox" selected="true" />
</mx:FormItem>
<mx:FormItem label="Include Balance of 0 Items?:" x="550">
<mx:CheckBox id="checkBoxZero" selected="false" change="checkBoxZero_change(event);" />
</mx:FormItem>
<mx:FormItem label="Only Show Items > 30 Days?:" x="850">
<mx:CheckBox id="checkBoxAge" selected="true" change="checkBoxAge_change(event);" />
</mx:FormItem>
<mx:DataGrid id="POFromRequest" allowMultipleSelection="true" doubleClickEnabled="true" editable="True" horizontalScrollPolicy="auto" width="3500" height="300" dataProvider="{serverData}" y="36" itemRollOut="deleteToolTip(event)" itemRollOver="createToolTip(event)" itemEditEnd="RefData(event)">
<mx:columns>
<fx:Array>
<mx:DataGridColumn headerText="UserName" editable="false" dataField="SOURCEREQUESTUSERID" width="100"/>
<mx:DataGridColumn headerText="PO" dataField="PO" width="100"/>
<mx:DataGridColumn headerText="Vendor" dataField="VENDOR" width="270"/>
<mx:DataGridColumn headerText="Po Date" dataField="PO_Date" width="120"/>
<mx:DataGridColumn headerText="Ordered QTY (A)" headerWordWrap="{checkBox.selected}" dataField="Ord_Qty" width="120" />
<mx:DataGridColumn headerText="PO Item" dataField="POItem" width="100" />
<mx:DataGridColumn headerText="Commodity Description" dataField="CMDDESC" width="300"/>
<mx:DataGridColumn headerText="PO Unit Price" dataField="POUNITPRICE" width="120"/>
<mx:DataGridColumn headerText="Org code" dataField="ACTGORG" width="100"/>
<mx:DataGridColumn headerText="Receiving Document" dataField="RECEIVE_DOC_NUM" headerWordWrap="{checkBox.selected}" width="120"/>
<mx:DataGridColumn headerText="Received Qty (B)" dataField="RECQTY" width="150"/>
<mx:DataGridColumn headerText="Inv Document #" dataField="INVCODE" width="150"/>
<mx:DataGridColumn headerText="Vendor Invoice #" dataField="VENDINV" width="150"/>
<mx:DataGridColumn headerText="Invoice Status" dataField="INVSTATUS" width="150"/>
<mx:DataGridColumn headerText="Invoice Due Date" dataField="DUEDATE" width="150"/>
<mx:DataGridColumn headerText="Invoice Date" dataField="VENDORINVDATE" width="120"/>
<mx:DataGridColumn headerText="Fund" dataField="FUNDCODE" width="80"/>
<mx:DataGridColumn headerText="Account" dataField="ACCT" width="80"/>
<mx:DataGridColumn headerText="Org" dataField="ORG" width="80"/>
<mx:DataGridColumn headerText="Prg" dataField="PROG" width="80"/>
<mx:DataGridColumn headerText="Net Invoiced (C)" headerWordWrap="{checkBox.selected}" dataField="NETINVD" width="130"/>
<mx:DataGridColumn headerText="Balance not Received (A-B)" headerWordWrap="{checkBox.selected}" dataField="BALNOTRECD" width="175"/>
<mx:DataGridColumn headerText="Balance not Invoiced (B-C)" headerWordWrap="{checkBox.selected}" dataField="BALNOTINVD" width="175"/>
<mx:DataGridColumn headerText="Notes" headerWordWrap="{checkBox.selected}" dataField="NOTES" width="300"/>
</fx:Array>
</mx:columns>
</mx:DataGrid>
<mx:List id="square" visible="false" x="298" y="266"></mx:List>
<mx:Button click="POSendEmailAP()" label="Press to copy selected items to body of email template" width="478" y="344"></mx:Button>
</mx:Canvas>
<mx:Canvas width="100%" height="400" label="Direct PO Details: PO not created from request" id="DirectPO" backgroundColor="#D2E9DA" color="#A60831">
<mx:Button click="GetData3()" label="Press to load Data" width="305"></mx:Button>
<mx:FormItem label="HeaderWordWrap:" x="335">
<mx:CheckBox id="checkBox3" selected="true" />
</mx:FormItem>
<mx:FormItem label="Include Balance of 0 Items?:" x="550">
<mx:CheckBox id="checkBoxZero3" selected="false" change="checkBoxZero3_change(event);" />
</mx:FormItem>
<mx:FormItem label="Only Show Items > 30 Days?:" x="850">
<mx:CheckBox id="checkBoxAge2" selected="true" change="checkBoxAge2_change(event);" />
</mx:FormItem>
<mx:DataGrid id="DirectPOGrid" allowMultipleSelection="true" horizontalScrollPolicy="auto" width="3500" height="300" dataProvider="{serverData3}" y="36" itemRollOut="deleteToolTip2(event)" itemRollOver="createToolTip2(event)" itemEditEnd="RefData(event)">
<mx:columns>
<fx:Array>
<mx:DataGridColumn headerText="PossibleUserName" dataField="PossibleSourceUserid" width="160"/>
<mx:DataGridColumn headerText="PO" dataField="PO" width="100"/>
<mx:DataGridColumn headerText="Vendor" dataField="VENDOR" width="270"/>
<mx:DataGridColumn headerText="Po Date" dataField="PO_Date" width="120"/>
<mx:DataGridColumn headerText="Ordered QTY (A)" headerWordWrap="{checkBox3.selected}" dataField="Ord_Qty" width="120" />
<mx:DataGridColumn headerText="PO Item" dataField="POItem" width="100" />
<mx:DataGridColumn headerText="Commodity Description" dataField="CMDDESC" width="300"/>
<mx:DataGridColumn headerText="PO Unit Price" dataField="POUNITPRICE" width="120"/>
<mx:DataGridColumn headerText="Org code" dataField="ACTGORG" width="100"/>
<mx:DataGridColumn headerText="Received Qty (B)" dataField="RECQTY" width="150"/>
<mx:DataGridColumn headerText="Inv Document #" dataField="INVCODE" width="150"/>
<mx:DataGridColumn headerText="Vendor Invoice #" dataField="VENDINV" width="150"/>
<mx:DataGridColumn headerText="Invoice Status" dataField="INVSTATUS" width="150"/>
<mx:DataGridColumn headerText="Invoice Due Date" dataField="DUEDATE" width="150"/>
<mx:DataGridColumn headerText="Invoice Date" dataField="VENDORINVDATE" width="120"/>
<mx:DataGridColumn headerText="Fund" dataField="FUNDCODE" width="80"/>
<mx:DataGridColumn headerText="Account" dataField="ACCT" width="80"/>
<mx:DataGridColumn headerText="Org" dataField="ORGThanks...I was using Alert instead of trace to make sure events were firing along with correct parameter values before calling web service. I never thought in a million years that would be causing the problem. However, when user hits return it drops the focus to the next row which causes a second itemEditEnd to fire (so it still doesn't work smoothly). At any rate, I approached it another way by wiring up a pop up box.
-
How to exit event structure after a trigger occurs?
I am acquiring some analog signals. Before the trigger occurs, I would like to be able to save the setting or load the settings. I am using an event structure to do it.
My problem is I can't not exit the event structure after the analog acquisition is finished.
I am attaching the vi.
Thanks for your comment.
Attachments:
event.vi 53 KBSeems you are trying to fire an event using a local variable. This will not work. Events are primarily designed to handle user interactions on the front panel. If you want to programmatically fire the stop event, you can write to a "val(sgnl)" property of the stop button.
Still, you program needs quite a bit more work than that. For example you cannot do any save or load operation before the trigger happens. Maybe you should redo the entire thing as a state machine?
LabVIEW Champion . Do more with less code and in less time . -
What event fires when a captivate ends?
Hello,
I'm a web app developer and I'm working with Captivate. I'm not a captivate designer myself, just a programmer, so I don't know the first thing about Captivate (though I'm working with someone who does). I'm wonder if there's an event that fires when the captivate is done--that is, when the user clicks on the "submit" button on the last slide after which there is nothing more for the captivate to do.
My friend the Captivate designer says the submit button is wired up to an event handler in the CPM.js file. The script is named "assessment_Pass" and we've located the event handler in CPM.js. However, I can't work with this. I can't manually manipulate minimized javascript that Captivate generates, especially when we've got hundreds of captivate files and keep getting updated. I need to work in the javascript in my Visual Studios project. If I could know what event fires (if an event fires) when the captivate is done, I can then wire it up to a javascript event handler in my development environment.
I found this list of Captivate events (they're actually for the Captivate API Interface, which I'd prefer to work with, but any event will do), but none of the one's I tried seem to fire.
Any help is much appreciated.[quote="elearning_dude"]Events are exposed only for interactive objects (buttons, button smartshapes, etc.) and ON_SLIDE_ENTER and ON_SLIDE_EXIT (the latter of which actually fires on the first frame of the *following* slide, unless it's been fixed in Cp8). [/quote]
Well, it's a submit button on the captivate that's supposed to fire the event. Is that an interactive object?
[quote="TLCMediaDesign"]Maybe if you explained what you are trying to accomplish I could point you in the right direction. Maybe you could use the CPAPI_MOVIESTOP or CPAPI_VARIABLEVALUECHANGED events and check if on the last slide.[/quote]
I would like to know when the captivate ends (i.e. when the user has gone through all the slides and has clicked the submit button) and to do some processing in javascript afterwards (essentially, calculate the user's score and figure out whether they passed or failed).
I'm trying the CPAPI_VARIABLEVALUECHANGED event on a captivate variable called "result". My friend the Captivate designer says that when the user clicks the last submit button, a script is run to change the value of this variable. When it changes, this event should be fired and I should be able to catch it, no?
I'm doing it like this:
_captivateWindow.cpAPIEventEmitter.addEventListener("CPAPI_VARIABLEVALUECHANGED", "result", ResultChanged);
var ResultChanged = function()
alert("hello");
but I'm not getting my hello message.
I will try the timer idea that andreleal suggested and get back to you. -
What event fires when user "leaves" TextInput?
I need to perform some calculations on data that the user is inputting into several text inputs. I want to perform the calculations whenever the user leaves any of the TextInputs. The user could leaves the TextInput by tabbing out of the box or clicking out of the box. What event fires whenthe users leaves the TextInput boxes?
Thanks!focusOut
Dispatched after a display object loses focus. This happens when a user highlights a different object with a pointing device or keyboard navigation. -
How do I add web part in the event receiver after the site is provisioned in SP 2010?
How do I add web part in the event receiver after the site is provisioned in SP 2010?
You try the below steps:
1. Use long operation to provision the site, so that it does not time out in process.
2. After provisioning, you can add a page or add the web part directly to landing page of site.
For each of the above steps you can find the sample code pieces.
if you couldn't get that, let me know. I will share with you.
Thanks, Ashish If my response has helped you, please mark as answer. -
Matt,
Thanks for the reply.
In my current experience, I am not able to successfully subscribe to and see the TargetApplicationChosen event fire from Windows Phone 8.1.
In Windows Store 8.1 (Tablet), it works fine.
Questions
Is this event expected to fire in Window Phone 8.1 (Universal Apps, Not Silverlight 8.1) ?
Does this event depend on the target application to supply AppName?
Thanks for your help. Much appreciated.
Example Code Block
//From Page Contstructor or OnNavigatedTo Handler
_dataTransferManager = DataTransferManager.GetForCurrentView();
_dataTransferManager.TargetApplicationChosen += DataTransferManagerOnTargetApplicationChosen;
private void DataTransferManagerOnTargetApplicationChosen(DataTransferManager sender, TargetApplicationChosenEventArgs args)
//fires in tablet but not phoneThis is not an answer, Mr. Wong. The link you referenced refers to the DataTransferManager class being supported only in Native apps, which includes Windows Phone 8.1 RT apps. All aspects of the DataTransferManager work except for the TargetApplicationChosen
event under a WP8.1 universal app. This event does NOT fire in the Windows Phone 8.1 RT API implementation of DataTransferManager.
You need to reopen this thread and address the issue, please. The lack of support for this event is problematic for some phone scenarios, most notably supporting NFC Tap and Share.
Mark Jones, Owner MJ App Factory -
Which event dispatched after text selection done on spark text area in Apple iPad using Adobe Flex 4
I need to know which event triggered after text selection done in Apple iPad. This way i have done in desktop air app code (mouse events)
protected function txtEditor_mouseUpHandler(event:MouseEvent):void
if(txtEditor.selectionAnchorPosition != txtEditor.selectionActivePosition){
showNoteToolBar(event);
txtEditor.focusEnabled = true;
txtEditor.setFocus();
But in Apple iPad how to achieve through "Touch Event" ? And also i need how to hide all context menu on Spaek TextArea?. Why Touch.End event is not fired after place cursor on text area ?
Please help me !Ok, so I finally got it working but this is not ideal at all. Adobe really needs to give us some direction on how to properly deal with font embedding and TLF now that the release build breaks all functionality with loading runtime fonts and TLF.
Problem:
I am embedding collections of fonts (faces) into single family classes. Each individual face is registered with Font.registerFont(). I need to do this because I have to have mixed fonts within text flows - at least according to Alex H's recent blog post.
Fonts do not display in TLF without doing the following:
1. GlobalSettings.resolveFontLookupFunction = null;
2. editor.textFlow.flowComposer.swfContext = ISWFContext(this.getFontContext("AnyFamilyNameFromAnyFontEmbedded", false, false, FontLookup.EMBEDDED_CFF));
3. Instead of #2, use editor.textFlow.invalidateAllFormats();
Either #2 or #3 need to be performed. If I have a spark richEditableText control in MXML with defined familes from the loaded fonts. I even tried placing the control into a separate state so it wasn't created until after the fonts were loaded... I still needed to invalidate the formats or set the context.
The "AnyFamilyNameFromAnyFontEmbedded" does not need to be all of the embedded family names. It only needs to be one of them. Once one is used, all embedded fonts work. Also, I have to use the internal namespace to even get access to getFontContext, another oddity that, in my humble opinion, should never be necessary to create mixed style TLF content.
My questions are then:
1. Why am I required to use ISWFContext if I am using Font.registerFont()?
2. Why is GlobalSettings.resolveFontLookupFunction = null; also required for this to work?
3. What is the recommended workflow to embed fonts from multiple SWF files into the release build and have it work without having to jump through all these hoops? -
How to see the wait events info. after excute a select query
Hi
How to see the wait events info. after execute a select query. Are there any parameter to set for this option?
And also wanna see the follwing info. in trace file. For this what are the parameters I have to set right?
SELECT * FROM emp, dept
WHERE emp.deptno = dept.deptno;
call count cpu elapsed disk query current rows
Parse 1 0.16 0.29 3 13 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.03 0.26 2 2 4 14
Misses in library cache during parse: 1
Parsing user id: (8) SCOTT Regards
Arpitha$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Apr 20 15:29:33 2011
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> SHOW PARAMETER dump
NAME TYPE VALUE
background_core_dump string partial
background_dump_dest string /user/oracle/app/oracle/admin/
orclsb/bdump
core_dump_dest string /user/oracle/app/oracle/admin/
orclsb/cdump
max_dump_file_size string UNLIMITED
shadow_core_dump string partial
user_dump_dest string /user/oracle/app/oracle/admin/
orclsb/udump
SQL> ALTER SESSION SET EVENTS='10046 trace name context forever, level 12';
Session altered.
SQL> SELECT * FROM emp WHERE deptno=20;
EMPNO ENAME JOB MGR HIREDATE SAL COMM
DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800
20
7566 JONES MANAGER 7839 02-APR-81 2975
20
7788 SCOTT ANALYST 7566 19-APR-87 3000
20
EMPNO ENAME JOB MGR HIREDATE SAL COMM
DEPTNO
7876 ADAMS CLERK 7788 23-MAY-87 1100
20
7902 FORD ANALYST 7566 03-DEC-81 3000
20Now
$ pwd
/user/oracle/app/oracle/admin/orclsb/udump
$ ls -ltr|tail -5
-rw-r----- 1 oracle oinstall 622 Apr 20 11:35 orclsb_ora_949.trc
-rw-r----- 1 oracle oinstall 651 Apr 20 11:35 orclsb_ora_976.trc
-rw-r----- 1 oracle oinstall 1982 Apr 20 11:35 orclsb_ora_977.trc
-rw-r----- 1 oracle oinstall 1443 Apr 20 15:29 orclsb_ora_1251.trc
-rw-r----- 1 oracle oinstall 279719 Apr 20 15:30 orclsb_ora_1255.trc
$ tkprof orclsb_ora_1255.trc orclsb_ora_1255.txt
TKPROF: Release 10.2.0.2.0 - Production on Wed Apr 20 15:32:17 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
$ ls -ltr|tail -5
-rw-r----- 1 oracle oinstall 651 Apr 20 11:35 orclsb_ora_976.trc
-rw-r----- 1 oracle oinstall 1982 Apr 20 11:35 orclsb_ora_977.trc
-rw-r----- 1 oracle oinstall 1443 Apr 20 15:29 orclsb_ora_1251.trc
-rw-r----- 1 oracle oinstall 279719 Apr 20 15:30 orclsb_ora_1255.trc
-rw-r--r-- 1 oracle oinstall 26872 Apr 20 15:32 orclsb_ora_1255.txtThis orclsb_ora_1255.txt contains the required information. -
CFL Event Fires more than ONE Time
Hi,
Does anybody in here experienced that when an add-on form is created with a CFL in the matrix, and you closed the form, and then opens the same form again ( by clicking a menu and without exiting the application), the CFL event fires equal to the times you closed the form?
for example i closed the form 3 times, and then when i debug the application, it fires the CFL event also 3 times..
It seems its some kind of creepy bug..
Thanks...
BTW im using SAP B1 2007 A (8.00.175) SP:00 PL:30Hello Robert,
Does it work fine in the previous or latest version? if yes, there may be a bug in the patch, you may need to update to latest version.
How ever these is a workaround:
Have a CFL counter (lCounter) to count the times of CFL event fired at the beginning of Event handler.
if (lCounter > 3)
Exit Sub
Kind Regards
-Yatsea -
Is it too late to modify preview thumbnails once beforeSave event fires?
My goal:
I need to show non-printing layers in my .indd files' preview thumbnails. We produce print jobs which will have post processing applied to them (thermography and cutouts glued to the printed cardstock). Our .indd files have layers containing these post production images so that we can determine proper alignment and spacing for the end product.
These are graphics are placed in non-printing layers so that they do not print. However InDesign generates preview thumbnails which do not contain these non-printing images. This is a problem for us because we can not tell the nuanced difference between similar indd files soley by their preview images.
Therefore my goal is to somehow include these non-printing layers in the image preview thumbnail.
What I have done thus far:
I have a startup script which registers for the beforeSave and afterSave events. Before the same it marks all the non-printing layers are printable (printable property = true). Then the afterSave event undoes this by setting those layers back to non-printable. I track which layer was originally non-printing by adding a moniker to the layer's name.
What is not working:
When I run a script that marks the layers as printable, saves then undoes the printable changes everything works perfectly. The preview thumbnail is exactly what I want.
However, when I run it as a startup script registering for the beforeSave/afterSave events this fails:
Success: The beforeSave does correctly update the printable property then modifies the layer's name. This is as expected and working well.
Success:The afterSave does correctly reset the printable property and modified the layer's name. This is as expected and working well.
Failure: The file's preview thumbnail does not reflect the printable=true peroperty of the affected layers.
My Question:
From what I outline above it looks as if the preview image is determined before the beforeSave event fires.
Question 1: Is this true?
Question 2: How can I affect the layers' printable properties once a save occurs?
As a last resort I could intercept any CTRL+S keystroke or the File-->Save menu option and call my original script (as I describe above). I would like to avoid that as it is fragile and less elegant.
Follow question: Can anyone show me what the actual work flows are for these events? For example what does InDesign do during its save function and at what points does it trigger beforeSave and afterSave events?I also tried a different approach which worked:
Added two event listeners to the "Save" MenuAction object. One for "beforeInvoke" and one for "afterInvoke". This worked and I now have correctly rendered preview thumbnails. However .....
....when the afterInvoke event fires and I update the layers to reflect their non-printing state and change their names back to normal this is reflected as if I have made alterations. Therefore the file is left in a "dirty" state thus wanting to be saved (the document's title has an * indicating changes were made). The document's "modified" property is read only so I can not forcibly change it. I can change set the Document.properties['modified'] to false without error, but either it does not take or it is instantly reset.
This is a problem because when I exit the app it sees that there have been changes since the last save. Therefore it wants to save the doc. Saying "yes" to save the doc means that the "save" function is called but not from the Save menu. Therefore my MenuAction handers are not invoked. My beforeSave/afterSave handlers are but this does not function as I would expect (see my original post).
Can someone please help with this? Maybe some kind soul from Adobe who understands the event firing workflow?? -
Will "Value change" events fire when changed via ActiveX?
I have a VI with an Event Structure defining several Value Changed events. These events are associated with various buttons on the control panel. When I work through the panel and press the buttons, the events fire correctly. However, if I connect via the COM/ActiveX control and change the control values, the button indicator light changes, but the Value Change event does not fire. Can we trigger value changed events remotely or must they be triggered via a mouse-click on the button?
Hi Cyle,
Please take a look at the document below. It explains why the events are not being fired.
Event Structure Does Not Capture the Value Changed Event for Indicator Wired to Iteration Terminal
I hope this helps.
Sincerely,
Feroz
National Instruments -
Table Maintenance Events - "Event 02 After Saving the Data in the Database"
Hi,
Can we identify the record marked for deletion in the "Event 02 After Saving the Data in the Database" ?
Thanks & Regards,
Esha RajLook at online documentation :
- [Event 02: After Saving the Data in the Database|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. - [Internal Table TOTAL|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. . - [Field Symbols <ACTION> and <ACTION_TEXT>|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
. . . - [Constants for Field Symbols <ACTION>, <ACTION_TEXT>, <XACT> and <XACT_TEXT>|https://help.sap.com/saphelp_nw04/helpdata/en/77/06b11859f511d2a6070000e82deaaa/frameset.htm]
Regards,
Raymond
Maybe you are looking for
-
Somehow my nano now lost all its music so now its empty! Also, before windows used to recognize my ipod and i'd get a pop up saying "open to view files" but now I don't even get that anymore. I have also tried syncing it by putting them in disk mode
-
Hi i have copied a already existing sap Script(both layout SE71 and Print program Se38) in our Script but for that i am not doing any changes in Print program. for any changes in my layout(se71) i create Perform ,and put form for that in a Subroutin
-
I have a Mac, using chrome, and trying to install Kevin Kubota Auto album into Photoshop. Talked with Kevin Kubota support and they said they can't help me anymore because my Adobe Extension Manager was reinstalled and will not display Photoshop CS5
-
Java vm creation crashes if max heap is set too big
I start the jvm from deep within a c / fortran app. If I give a "decent" max heap size w/ -Xmx option, everything is fine. However, the JNI_CreateJavaVM crashes w/ Unhandled exception at 0x060b766b (jvm.dll) in tnapa.exe: 0xC0000005: Access violation
-
ITunes installs but will not run post install in SERVER 2003
I have MS Server 2003 as my OS. I haven't used iTunes in a long time because I never got it to work on my computer. I downloaded anapod explorer and that has worked well for me, but I really would like to try iTunes again as I have several friends th