Filtered data has to show in X axis

Would you please guide me how to get the dynamic filtered data in column chart x axis ?
1. I have 7 columns.
2. Using filter component with 4 data filters
3. Remaining 3 values 2 columns will be Y axis n 1 will be X axis
(which is dynamic)
4. X axis , I am able retrieve one record not all
(some of the filter I have two more data / records).
Please find the attached .xlf with .xls files (attcahed files are in compressed mode). I don't khow, how to upload the source
Happy to discuss
Edited by: stsrin on Jan 5, 2010 9:00 AM
Edited by: stsrin on Jan 5, 2010 9:00 AM

I was able to figure this out.
When we use Just textRotation = "TR_HORIZ_ROTATE_90" This wouldn't work. we need to include automaticRotation = "AR_NO_ROTATE"
Used this and it worked.
<O1TickLabel textRotation="TR_HORIZ_ROTATE_90" automaticRotation="AR_NO_ROTATE" />

Similar Messages

  • My new macbook pro (lion) iCal has been showing the wrong date?

    My new macbook pro (lion) iCal has been showing the wrong date for stored events - even though i have put the appointment in on the right date when I look it up a week or so later it has changed?
    I think it might be showing 2011 date? How can i fix this and do I have back-up of my original dates?

    Good to hear .  Happy computing!

  • Is there a way to ensure that data has been wiped from my iphone 3g. It shows the "connect to itunes" screen when turned on.

    Is there a way to ensure that data has been wiped from my iphone 3g. It shows the "connect to itunes" screen when turned on.

    That is how it appears brand new out of the box.

  • Only show certain fields after a date has passed

    How would I set a recordset to only show certain fields after
    a date has
    passed?
    For example:
    I have a list of classified adverts some which include an
    image which the
    client pays extra for. After a certain time period, say, 1
    year,
    would it be possible to use some kind of IF statement (or
    something) to no
    longer show the image?
    Thanks
    Gary

    scrap that entire post man.
    I'll rewrite it here in a few.
    "crash" <[email protected]> wrote in message
    news:[email protected]...
    >
    OK. I can't be as much help as I was hoping, since I
    just did this in
    > PHP and MySQL. But we can do a bit. My ASP is rusty
    enough I'm just going
    > to give you what I think you should do.
    >
    > You'll need to research how to format dates and most
    importantly strip
    > away the timestamp. In MySQL, you can format the date as
    it comes out of
    > the recordset. I'm not sure if you can do this in
    access, but I would
    > imagine that you can (indeed, it might be the same SQL).
    >
    > <%
    > varToday = Date (should be able to format out timesteamp
    here);
    > varTerm = 365; 'This will be your constant term, defined
    in days, it looks
    > like from archived posts
    >
    > varExpiredDate = varToday = varTerm;
    >
    > Search your recordset via varTerm. ie
    > WHERE datefield < <% varTerm %>
    >
    > You will need to search date formatting in Access to see
    how to strip out
    > the Timestamp from your date, but you should be able to
    do this from your
    > SQL statement, and return just the date, this will be
    compared to your
    > varTerm, which basically states that if your signup date
    is beyond a year
    > from today, your ad will need to be renewed.
    >
    > I"m not very happy with this, but it's all my brain is
    coming up with
    > right now. Gimme a few to review it and I might have
    something more for
    > you.
    >
    > HTH, sorry I couldn't give you code or urls for date
    formatting.
    >
    > Additionally, you will eventually need to build
    somethign that checks
    > images and and dates and then sends an email to your
    customer letting them
    > know their term has expired.
    >
    > OR - You could also add a new field to your database
    which automatically
    > updates an "expire" time in your ad table which
    automatically adds days to
    > the time. If you do this, you don't have to worry about
    stripping
    > timestamps or anyting, and you can just do a simple
    lookup for if Date >=
    > DateExpireField then don't pull image.
    >
    >
    >

  • Graph Data does not align with the axis label

    Hi,
    The graph data does not align with the axis label when
    datetimeaxis is used.
    http://livedocs.adobe.com/labs/flex3/html/help.html?content=charts_displayingdata_04.html
    (in the using parseFunction property example) when you hover on the
    line graph the values do not align on the labels. Is this a bug?
    Can somebody help me with this.
    Thank you,
    Gautam.

    Hi All
    Thanks for looking into it.
    Actually we have just added a field GJAHR (was missing in the extractor) so that it takes data accoring to fiscal yr. Actually we had a issue that the Business area for a particular vendor 'X' and doc no 'Y' was showing incorrectly (similar to that of yr 2008) but it changed this yr and the extractor was still picking Business Area for yr 2008.
    So we added GJAHR field so that it takes correct Business Area. we have checked in R/3 Extractor checker and it shows correctly.
    But that change has not reflected in BW yet even after replicating datasource.
    I hope i have made you all understand the situation.
    Thanks for your help
    Ishi

  • Obiee 11g : Best practice for filtering data allowed to user

    Hi gurus,
    I have a table of the allowed areas for each user.
    I want to show only the data facts associated with these allowed areas.
    For instance my user scott can see France and Italy data.
    I made a variable session. I put this session variable in a filter.
    It works ok but only one value (the first one i think) is taken in account (for instance, with my solution scott will see only france data).
    I need all the possible values.
    I tried with the row wise parameter of the variable session. But it doesn't work (error obiee).
    I've read things on internet about using stragg or valuelistof but neither worked.
    What would be the best practice to achieve this goal of filtering data with conditions by user stored in database ?
    Thanks in advance, Emmanuel

    Check this link
    http://oraclebizint.wordpress.com/2008/06/30/oracle-bi-ee-1013332-row-level-security-and-row-wise-intialized-session-variables/

  • I recently upgraded from Firefox 3.6.5 to Firefox 4.0.1 and status updates after pressing "Sync Now" which tell you that data sync is in progress or has finished, have STOPPED appearing. How do I know whether my data has been synced or not?

    More specifically even when I click Tools->Sync Now nothing happens. Also when I do a "Reset Sync" via Tools->Options->Firefox Sync, nothing happens. Meaning no progress bar appears indicating that data is being synced or has been synced, as it used to happen in earlier versions of Firefox. Is there a way to know after pressing Sync Now that my data has been synced?

    There is no visual representation to show that it has worked or is in progress, but if it fails you get a bar appearing at the bottom of the screen telling you that the sync failed.
    If you add the Firefox Sync toolbar button to the toolbar, hovering the mouse over the button will give a tooltip showing the last date/time of the last successful sync. For details of how to add the button see https://support.mozilla.com/kb/how-do-i-customize-toolbars

  • In oneasset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset i

    in on asset class i have created 2 assets by using of aso1 after that i acquired one asset for that i run the depreciation for first 5 periods, it has been showing depreciation for those period but if i am trying to run the depreciation for second asset it is not showing first 5 periods why it is not showing? Is there any reason?

    Hi
    Repeat run you can do only for the last depreciation period. For the asset which you are tryin to post depreciation from July to Jan, please check the asset value date which you have given while posting the transactions or in the asset master.
    If the asset value date is in July, then deprecaition from July - Jan will get posted in the current month depreciation in total. You will not be able to post depreciation individually month wise using AFAB.
    REgards
    Malathi

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • 'Raw' Data XMP view shows internal properties that don't exist in the data

    In FileInfo view for an image, if I switch to the 'Raw Data' tab, it shows photoshop:ColorMode and photoshop:ICCProfile. However, when I check the actual XMP data of the image e.g. using exiftool or a text editor, these properties do not exist in the XMP data.
    According to this thread: http://forums.adobe.com/message/5057589 these are both internal properties to PS / Bridge, which explains why they don't exist in the XMP. But why are they shown in the 'Raw' data view for the XMP then? Showing them here is just confusing as it makes it seem like they should exist in the XMP data.
    I can't really see any point in including nonexistent tags in the Raw Data view. But if it is deemed necessary, how about highlighting them a different color, such as using a grey font instead of black? At least it would indicate that they were different to the real data.
    P.S. This is with Bridge CS5, possibly the issue has been fixed in CS6?

    Hi Paul
    The issue is that the Bridge File Info panel is showing these tags in the XMP for the image, but if you check the XMP of the file, those tags aren't there.
    As a side issue, Bridge File Info panel is also showing the XMP in a different structure to that which exists in the actual file. There are two issues here really
    ACR is not writing the photoshop:ColorMode tag (or the photoshop:ICCProfile tag) to the JPEG (I checked the .xmp sidecar file for the RAW file and the photoshop:ColorMode tag does exist in there, but does not exist in the JPEG file converted through ACR).
    Bridge's File Info panel is showing data in the XMP that is not actually there.
    Although I would like the ColorMode tag added to the image, I don't think point 1 is a real issue, since the ICC profile is embedded okay. Point 2 does appear to be a bug (or at least it is confusing if it is intended behaviour).

  • Problem with filtering data

    Hi!
    I'm having trouble with filtering data from my table and don't know how to resolve it properly.
    I created a tabular form my table, a few text fields that are used as input for different columns of the filter and a filter button that submits the page.
    The problem appeared when I try to filter a column that has null values in the table and is editable...that's as far as I have concluded.
    So when I press the button I get zero rows even though there should be some.
    This is the submitted query:
    select
    "MSR_PRD_ID",
    "SRC_STM_ID",
    "ID",
    "ISIN",
    from "#OWNER#"."IZV_SLOG_DET"
    WHERE
    lower(MSR_PRD_ID) = lower(nvl(:P7_X_MSR_PRD_ID,MSR_PRD_ID)) and
    lower(SRC_STM_ID) = lower(nvl(:P7_X_SRC_STM_ID,SRC_STM_ID)) and
    lower(ISIN) = lower(nvl(:P7_X_ISIN,ISIN)) and
    The nvl function is used so that if the user leaves the field empty it only filters by the fields that have input.
    Does anyone know how I could circumvent this?
    Regards,
    Ivan

    LOWER (NVL (ISIN,'Y')) = LOWER (NVL (:P7_X_ISIN, LOWER (NVL (ISIN,'Y'))))
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.apress.com/9781430235125
    https://apex.oracle.com/pls/apex/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494

  • The filtering process has been terminated

    got 1 WFE and 1 App server
    configured the search like this: 
    I've moved the search index on both servers so it's like this; (I know it's different folder names)
    IndexPartitionOrdinal : 0
    RootDirectory         : E:\SPSearchIndex
    ComponentId           : 7bfd9b97-fb14-4e26-8b93-05ce8340c493
    TopologyId            : 082bdf84-ba56-41ef-9b64-6b9a0c7407f4
    ServerId              : 39202252-fb20-43c9-a674-84c3d4891da1
    Name                  : IndexComponent1
    ServerName            : APP1
    IndexPartitionOrdinal : 0
    RootDirectory         : E:\SearchIndex
    ComponentId           : 5c076b2c-945a-4a72-955a-237d003a7498
    TopologyId            : 082bdf84-ba56-41ef-9b64-6b9a0c7407f4
    ServerId              : ad0c8592-edec-47c5-a14b-df682c13c514
    Name                  : IndexComponent2
    ServerName            : WFE1
    on both servers The <machinename>/WSS_WPG and <machinename>/WSS_ADMIN has full control (also the Searchcontent account) to the folders  - but still I get the error:
    "The filtering process has been terminated "
    can someone please advise so the Search can crawl flawless and without errors?

    Hi,
    Firstly, please ensure Search Service Account has access to the SearchIndex share which is usually located
    in  "%Program Files%\Microsoft Office Servers\15.0\Data\Office Server\Applications" directory. And make sure “WSS_WPG” group has full control permissions to "C:\Windows\Temp" directory.
    Then try removing and add the existing crawl rules. You could also change the identity of the search to the farm account. Restart search related service and start full crawl.
    If it still doesn’t work, please check ULS log and find more detail error message.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • All my third-party app's iCloud data has gone!(iOS7)

    I use iOS7 from beta1 to GM ，and iCloud always work well on my iPhone and Mac. But on 19th I restore iOS7 GM to public version，here comes the problem. All my third-party app's iCloud data has gone! include game data and file data，such like safari ski 、onesafe、byword and also iWork , they all gone！ Email and contact and photo stream works well .  So ，why is the problem happened and how to solve it ？Please help me ...

    It's not only third-party apps having problems.
    It took about 2 hours to find a new contact I added on my iPhone to be found on my iPad.
    In my case I can find the third-party-apps under iCloud > Manage Storage. Funny thing is both iPhone and iPad show the same numbers, but the apps are definitely not synced.
    I think Apples servers are hopelessly overloaded with all the iOS- and App-update load. Best advice should be to stay calm. Very likely the situation will declamp by itself...

  • Filtering data already filtered using DAX

    Hi there
    I am using DAX to calculate the count of instances in a filtered table
    e.g.
    =CALCULATE( COUNT(Table[Tariff] ,
    FILTER( Table , Table[Tariff] > 0 )
    This part of the code works fine. My trouble arises when I am trying to filter the table that I have already filtered:
    =CALCULATE( COUNT(Table[Tariff] ,
    FILTER ( FILTER( Table , Table[Tariff] > 0 ) , Table[Tariff] = MIN(Table[Tariff]) )
    In the above calculation, I want to 
    1. Filter out the tariffs that are greater than zero [this bit works fine]; and then
    2. Take that table filtered from 1. above and further filter that by extracting only those tariffs that are equal to the minimum in that data table [this part isn't working].
    Instead of doing what I need it to, this formula is treating the outer FILTER in the same manner that it would be treated if I had only one filter. Thus, as zero is the minimum in the unfiltered data set it is only returning all the zero tariffs - even through
    I filtered these out already.
    If anyone can please assist, it would be much appreciated.
    Cheers
    Andrew

    Hi Andrew,
    Something along these line may work...
    =CALCULATE(
    SUM(TariffData[Tariff])/COUNT(TariffData[Tariff]),
    FILTER(
    FILTER(
    TariffData,
    TariffData[BEGIN_DATE_INDEX] <= [Date_Count]
    && TariffData[END_DATE_INDEX] >= [Date_Count]
    TariffData[Tariff_Duration] = CALCULATE(
    MIN(TariffData[Tariff_Duration]),
    FILTER(
    TariffData,
    TariffData[BEGIN_DATE_INDEX] <= [Date_Count]
    && TariffData[END_DATE_INDEX] >= [Date_Count]
    ...But it's likely that you'll need to adjust the inner most CALCULATE to get the right behaviour due to the filter context transition. If you're able to provide some test data and details of how the data has been modelled, we should be able to arrive at
    a solution that definitely works.
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com
    Blog: http://www.nimblelearn.com/blog
    Twitter: @nimblelearn

  • ODI: How determine if auto load is complete and all data has gone through

    Hi All,
    I am currently executing the below scenario and following http://docs.oracle.com/cd/E26070_11/otn/pdf/integration/E26075_01.pdf for the same.
    SRC: AGILE
    TRG: OBIEE
    As per the above i get out of the box packages which are used and executed , since this is something which comes out of the box how to determine whether my data load is complete and data has gone through from SRC->ODM->TRG?
    My Operator and sessesion show success and secondly i don see any errors in logs as well .
    Any help ? Anybody already experienced above scenario please help .
    Cheers,
    Mak

    So who do I believe?
    Blog:  http://www.jamoroki.com
    James King
    about.me/jamoroki
      <http://about.me/jamoroki>

Maybe you are looking for