Filters not applied in Physical Query?

Hi all..I have two tables (facts) and a dimension table..
Fact A, Fact B, DIm C
fact A, Dim C belong to one database in one Physical Server (CUrrent Data Server)
Fact B belong to another database in another Server (History Server)
I have a report combining all these three tables.
But, When I apply filters in the report and check the physical query...
3 queries are being fired to to two Servers...
but I could see the filters on only one Query (for Fact A)
It is scanning whiole table of Fact B and Dim C and looks like filtering in BMM layer...hence my report is taking long time to run, as it is scanning the whole table without criteria..
Is there any thing I can do, such that The report filters are sent via all the queries?

Both fact donot have same structure..
my report consists of:
Dealer Number ||||||||||||||customer number |||||||||| customer name|||||||||purchase date||||||| settle date|||||| Price
Customer number, Purchase date, settle date comes from FACT A
Customer name Comes from Dim C
Dealer Number,Purchase Date, Settle date, prine are in Fact B
FACT A and Dim C are in same server but different databases..(sorry I just realized I mentioned same databases in my previous posts)
Dealer Number, Purchase Date, Settle date are input to FACT B which is in different Server. Price is pulled with these columns as inputs..
The thing is, Server should send a single query for Fact A, Dim C as they are in same server ...But it is sending two....(scanning Customer dimension fully...)
The real problem is..:::::
I have Dealer Number as report filter..
I wish this filter applies to FACT B....
but It isn;t....

Similar Messages

  • Date prompt not displayed in physical query

    Hi All,
      I am using obiee 11.1.1.6.8 where i am not able to view the date prompt filter which is used in dashboards in  nqs(physical query).. But the same i can able to view in Logical query..Can any one help on this issue.
    Reagrds,
    Guru

    Check cache settings.
    prefix this in prompt
    set variable disable_cache_hit=1;
    btw: Did you get a chance to look at https://forums.oracle.com/thread/2594287

  • LR5 Graduated filters not applied to final image

    I have recently had an issue using the graduated filters in the LR5 develop module.  While in the develop module (working with a raw image (panasonic GH3)), I can apply and use graduated filters without issue, but when I switch to the library module or export the image , the changes disappear.  I have shot a few test shots since and worked with some old images and I cannot reproduce this issue.  I have the same problem with every image from a single import.  There have been no changes in settings on the camera or in Lightroom.  I did use a new memory card, but I doubt that the card is the issue.  Attached is a screen shot of the image while in the develop module (right) and library module (left).  Anyone have ideas on how to fix this problem or avoid it in the future.

    This is probably actually not the graduated filter not working, but the preview in Develop not being reliable when zoomed out. I've run into this with my own star images. This often comes up in images such as this with lots of fine structure. The noise reduction is not shown reliably in Develop when zoomed out. Then when you switch to Develop, it creates a good preview image that does have noise reduction enabled and suddenly your images appear different and less punchy especially when you have lots of little star points. It is actually more representative in these conditions. Make sure you zoom into 1:1 to really judge what is happening. At 1:1 the preview is correct in Develop when you have lots of fine detail. You probably have a graduated filter with clarity here? That is notorious for not previewing correctly with such images in Develop. To test whether the filter actually takes, do something extreme such as a few stops of exposure or so.

  • Spam Filtering Not Applied to LMTP Channels

    Hello,
    I've already setup spamassassin filtering at ims-ms channel, but only deliveries from tcp_local channels are being filtered. Messages from other frontend machines delivering to backends using LMTP are not tagged nor filtered.
    What's wrong with this?
    Relevant Channel Definitions:
    +! ims-ms+
    ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h"  "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U$S@$D destinationspamfilter1optin spam destinationfilter file:IMTA_TABLE:spamassassin_sieve.filter+
    ims-ms-daemon
    On the front end:
    +! tcp_lmtpcs (LMTP client - store)+
    tcp_lmtpcs defragment lmtp multigate connectcanonical fileinto @$4O:$U$S@$D port 225 nodns single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute+
    lmtpcs-daemon

    If you are delivering via LMTP, then the ims-ms channel will not be involved. You will need to configure the LMTP channels on the frontend MTA systems with destination filters like you have done for the ims-ms channel on the store.

  • Dataguard logs not applied

    Hi,
    We have dataguard on Oracle 10g. The logs are shipped from primary to physical stand by but when I look at "Last Applied Log" under EM on the primary db, I see 0. The logs are shipping but not applied to physical stand by.
    I restarted the standby to mount stage.
    I can tnsping both the database from other servers
    ***** on primary *****
    SELECT name, value FROM gv$parameter WHERE name = 'log_archive_dest_state_1';
    NAME
    VALUE
    log_archive_dest_state_1
    enable
    SELECT name, value FROM gv$parameter WHERE name = 'log_archive_dest_state_2';
    NAME
    VALUE
    log_archive_dest_state_2
    ENABLE
    SELECT name, value FROM gv$parameter WHERE name = 'standby_archive_dest';
    NAME
    VALUE
    standby_archive_dest
    select status, error from v$archive_dest where dest_id=2;
    STATUS ERROR
    VALID
    select switchover_status from v$database;
    SWITCHOVER_STATUS
    SESSIONS ACTIVE
    select protection_mode, protection_level, database_role from v$database;
    PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE
    MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE PRIMARY
    SELECT MAX(SEQUENCE#), THREAD# FROM V$ARCHIVED_LOG GROUP BY THREAD#;
    MAX(SEQUENCE#) THREAD#
    4483 1
    SELECT dest_id, valid_type, valid_role, valid_now FROM gv$archive_dest;
    DEST_ID VALID_TYPE VALID_ROLE VALID_NOW
    1 ONLINE_LOGFILE ALL_ROLES YES
    2 ONLINE_LOGFILE PRIMARY_ROLE YES
    ***** on physical stand by *****
    select protection_mode, protection_level, database_role from v$database;
    PROTECTION_MODE PROTECTION_LEVEL DATABASE_ROLE
    MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE PHYSICAL STANDBY
    SELECT MAX(SEQUENCE#), THREAD# FROM V$ARCHIVED_LOG GROUP BY THREAD#;
    MAX(SEQUENCE#) THREAD#
    4483 1
    Can anyone advise what can I check and how can I get the logs to apply on the standy by. The stand by is in mount stage. Thanks

    The alert log for primary does not show any errors:
    LNS: Standby redo logfile selected for thread 1 sequence 4520 for destination LOG_ARCHIVE_DEST_2
    This is in the alert log for standby
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[11]: Successfully opened standby log 5: '/u02/oradata/prd1/stby_redo_g5_m1.dbf'
    On standby I have the MRP process running:
    $ ps -ef|grep mrp
    oracle 10957 1 0 15:26:48 ? 0:01 ora_mrp0_prd1
    SELECT RECOVERY_MODE FROM V$ARCHIVE_DEST_STATUS WHERE DEST_ID=2 ;
    RECOVERY_MODE
    MANAGED REAL TIME APPLY
    This is from v$dataguard_status
    Remote File Server Warning 0 167 0 NO 20-DEC-07
    RFS[11]: Successfully opened standby log 5: '/u02/oradata/prd1/stby_redo_g5_m1.dbf'
    should I try this as first suggested ?
    alter database recover managed standby database parallel 2 using current logfile disconnect;

  • Group Policy Pref - Mapped Drives Not Applying to One User

    Hi All,
    I’m new to this list, so please excuse any etiquette slip ups.  
    I have three users at a site. All their machines are running Windows XP Service Pack 3 and have client side extensions installed. I created a group policy to map their default drives using GP User Preferences.
    Each of the drives is set to "update".
    As an example of the policy created XML is as follows:
    <Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="H:" status="H:"
    image="2" changed="2009-11-25 05:13:58"
    uid="{8A44D2F4-AAE5-4F43-AEEC-D36F08EA619C}" desc="Maps the users H drive to
    ServerName\users$\%username%" bypassErrors="1"><Properties action="U"
    thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
    path="\\ServerName\users$\%username%" label="Home (ServerName)"
    persistent="1" useLetter="1" letter="H"/></Drive>
    and
    <Drive clsid="{935D1B74-9CB8-4e3c-9914-7DD559B7A417}" name="J:" status="J:"
    image="0" changed="2009-11-30 03:52:58"
    uid="{535CD462-A45D-4363-ADA1-2316D5ECC703}" desc="Maps J drive for users to
    \\ServerName\apps" bypassErrors="1"><Properties action="C"
    thisDrive="NOCHANGE" allDrives="NOCHANGE" userName=""
    path="\\ServerName\Apps" label="Apps (ServerName)" persistent="1"
    useLetter="1" letter="J"/></Drive>
    The group policy is applied to an OU for that site. 
    All three users are in the same OU.
    All three users are also in the same “xxsitecode Users” group.
    2 of the users log into their pc and get the mapped drives with no issue, but one user doesn’t.
    There are no other login scripts and the user has no manually mapped drives.
    He does have a H drive mapped using the profile field in his AD object as a temp measure. But every 90 mins any other manually mapped drives are removed by the policy.
    We don’t use roaming profiles
    To trouble shoot I have tried
    -    Reinstalling client side extensions
    -    Re-joining the pc to the domain
    -    Running gpupdate from the command prompt to see if any event logs are generated (none are)
    -    Manually mapping the drives to make sure there is network access etc – I can manually map them/he can access them.
    -    Creating the user a new account, when he logs in using that account he gets his mapped drives on all PC’s
    -    Getting the user to log into a different pc, when he does this he doesn’t get his drives – so it’s not his machine or profile
    -    Manually checking the security on the user object in AD against one of the users who gets their drives mapped
    I'm sure the GP is fine because it works for two other users and the testing isolates his user account as the issue.
    The Policy I’m having issues with is xxxx Mapped Drives/ Printers
    I have posted this issue on the tech net GP discussion groups page, but haven’t had any replies.
    Any suggestions would be appreciated.
    Simone

    What's interesting is that I applied a new GP to users - it has one policy setting and one preferences setting. He only gets the policy setting.. aka he gets the wallpaper but not the homepage.
    Also, Jorke asked me to post the gpresult /z .
    Microsoft (R) Windows (R) XP Operating System Group Policy Result tool v2.0
    Copyright (C) Microsoft Corp. 1981-2001
    Created On 10/02/2010 at 2:19:34 PM
    RSOP results for DOMAIN\USER on MACHINENAME : Logging Mode
    OS Type:                     Microsoft Windows XP Professional
    OS Configuration:            Member Workstation
    OS Version:                  5.1.2600
    Domain Name:                 DOMAIN
    Domain Type:                 Windows 2000
    Site Name:                   SITECODE
    Roaming Profile:            
    Local Profile:               C:\Documents and Settings\USER.DOMAIN
    Connected over a slow link?: No
    COMPUTER SETTINGS
        CN=MACHINENAME,OU=Laptops,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
        Last time Group Policy was applied: 10/02/2010 at 1:06:38 PM
        Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
        Group Policy slow link threshold:   500 kbps
        Applied Group Policy Objects
            Allow Remote Assistance
            au-mdwsus
            Default Domain Policy
            Legal Notice
            Proxy Settings
            Logon as service, operating system
            AU-WSUS
            Desktop Background & Home Page
            Reg Permissions for default desktop
            Local Admin & Local Power Users
        The following GPOs were not applied because they were filtered out
            SITECODE Mapped Drives/ Printers
                Filtering:  Not Applied (Empty)
            Local Group Policy
                Filtering:  Not Applied (Empty)
            AVD Rollout
                Filtering:  Disabled (GPO)
        The computer is a part of the following security groups:
            BUILTIN\Administrators
            Everyone
            Debugger Users
            BUILTIN\Users
            NT AUTHORITY\NETWORK
            NT AUTHORITY\Authenticated Users
            MACHINENAME$
            Domain Computers
            CERTSVC_DCOM_ACCESS
        Resultant Set Of Policies for Computer:
            Software Installations
                N/A
            Startup Scripts
                GPO: Desktop Background & Home Page
                    Name:         image.bat
                    Parameters:  
                    LastExecuted: 7:55:34 PM
                    Name:         swiftdesktop.vbs
                    Parameters:  
                    LastExecuted: 7:55:35 PM
            Shutdown Scripts
                N/A
            Account Policies
            Audit Policy
            User Rights
            Security Options
            Event Log Settings
            Restricted Groups
            System Services
            Registry Settings
            File System Settings
            Public Key Policies
                N/A
            Administrative Templates
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\GloballyOpenPorts\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\CurrentVersion\Winlogon
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: Desktop Background & Home Page
                    Setting: Software\Policies\Microsoft\Internet Explorer\Security
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: AU-WSUS
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate\AU
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\RemoteAdminSettings
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services\RAUnsolicit
                    State:   Enabled
                GPO: au-mdwsus
                    Setting: Software\Policies\Microsoft\Windows\WindowsUpdate
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\WindowsFirewall\DomainProfile\AuthorizedApplications\List
                    State:   Enabled
                GPO: Allow Remote Assistance
                    Setting: Software\policies\Microsoft\Windows NT\Terminal Services
                    State:   Enabled
    USER SETTINGS
        CN=Matthew Luhrs,OU=Users,OU=SITECODE,DC=DOMAIN,DC=com,DC=au
        Last time Group Policy was applied: 10/02/2010 at 1:54:53 PM
        Group Policy was applied from:      XXXXXADC.DOMAIN.com.au
        Group Policy slow link threshold:   500 kbps
        Applied Group Policy Objects
            Allow Remote Assistance
           **** SITECODE Mapped Drives/ Printers - has Gp Pref's that should apply
            Default Domain Policy
            Proxy Settings
            **** Desktop Background & Home Page - has Gp Pref's that should apply
            Local Admin & Local Power Users
        The following GPOs were not applied because they were filtered out
            AU-WSUS
                Filtering:  Not Applied (Empty)
            Legal Notice
                Filtering:  Disabled (GPO)
            Reg Permissions for default desktop
                Filtering:  Not Applied (Empty)
            Logon as service, operating system
                Filtering:  Not Applied (Empty)
            Local Group Policy
                Filtering:  Not Applied (Empty)
            au-mdwsus
                Filtering:  Not Applied (Empty)
            AVD Rollout
                Filtering:  Disabled (GPO)
        The user is a part of the following security groups:
            Domain Users
            Everyone
            Offer Remote Assistance Helpers
            BUILTIN\Administrators
            BUILTIN\Users
            NT AUTHORITY\INTERACTIVE
            NT AUTHORITY\Authenticated Users
            LOCAL
            Computer Account Operators
            Internet Users
            SITECODE Users
            DOMAIN-Public Folders Administrators
            All Email Users
            DOMAINSWIFTEMAIL
            Domain Admins
            Offer Remote Assistance Helpers
            WSUS Administrators
            DHCP Administrators
            CERTSVC_DCOM_ACCESS
        Resultant Set Of Policies for User:
            Software Installations
                N/A
            Public Key Policies
                N/A
            Administrative Templates
                N/A
            Folder Redirection
                N/A
            Internet Explorer Browser User Interface
                GPO: Proxy Settings
                    Large Animated Bitmap Name:      N/A
                    Large Custom Logo Bitmap Name:   N/A
                    Title BarText:                   N/A
                    UserAgent Text:                  N/A
                    Delete existing toolbar buttons: No
            Internet Explorer Connection
                HTTP Proxy Server:   Proxy:port
                Secure Proxy Server: Proxy:port
                FTP Proxy Server:    Proxy:port
                Gopher Proxy Server: Proxy:port
                Socks Proxy Server:  Proxy:port
                Auto Config Enable:  Yes
                Enable Proxy:        Yes
                Use same Proxy:      Yes
            Internet Explorer URLs
                GPO: Proxy Settings
                    Home page URL:           N/A
                    Search page URL:         N/A
                    Online support page URL: N/A
            Internet Explorer Security
                Always Viewable Sites:     N/A
                Password Override Enabled: False
                GPO: Proxy Settings
                    Import the current Content Ratings Settings:      No
                    Import the current Security Zones Settings:       No
                    Import current Authenticode Security Information: No
                    Enable trusted publisher lockdown:                No
            Internet Explorer Programs
                GPO: Proxy Settings
                    Import the current Program Settings: No

  • OBIEE Issue - Physical Query not picking cascaded Conditions

    In one the OBIEE Reports, I have given a set of NOT LIKE conditions as below:
    Session Name is not LIKE (pattern match) '%AUDIT%'
    AND Session Name is not LIKE (pattern match) '%audit%'
    AND Session Name is not LIKE (pattern match) '%Audit%'
    But when we refresh the report, it filters only records which uses AUDIT keyword as part of Session Names. When I checked the session log (attached for reference), I found that though logical table query takes those three conditions, while firing against database Physical Query contains condition only for AUDIT wild card as filter. Whether there is any limitation applied on using NOT LIKE conditions or is it a bug or the way the conditions are sequenced is wrong (in OBIEE sense).

    Thanks buddy. Though this workaround will solve the issue, I am curious to know why OBIEE behaves such a way. Its peculier to see OBIEE admits all 3 conditions in logical query where the Physical query skips few of the conditions in session log itself.

  • OBIEE not applying outer join syntax to filters

    (Note: I've already thoroughly searched the forums before posting this. Thanks)
    My problem is the following:
    I'm trying to build a report that is a count from my fact table, grouped by month from my date dimension for a given year, resulting in 12 data points. The problem is that not all months have actual data, but I still need those months to show on the report with a count of zero. Typical simple reporting requirement.
    I have already done the obvious and within my business layer made the join between my fact table and my date dimension an outer join on the fact side, just like you'd do if writing the query by hand. And when tested by hand this includes all dates for the year anyway, and when coupled with the appropriate null test on the count measure I'd get my 12 data points with zeros were appropriate.
    The problem is that there are additional filters I need to apply on the fact data (there are a couple text-based code values that didn't warrant full tables themselves so are just degenerate dimensions directly on the fact table.)
    When these filters are applied at the Answer level, I'm only getting back the months that actually have data, and lose the months where the count should be zero. A check of the session log for the query that was generated shows the problem. While OBI properly generates the outer-join syntax for the join itself between the two tables (my date dim and fact table) it does NOT apply the outer-syntax to the constant-based filter against the fact, effectively negating the outer join.
    Actual query from the log (I simply changed the table aliases from the ugly T##### stuff OBI generates to something more readable for posting here):
    select D.DT_MONTH_NAME as c1,
    D.DT_MONTH_NUM as c2,
    I.INC_TYPE as c3,
    I.INC_EMP_GROUP as c4,
    sum(case when I.INC_KEY is null then 0 else 1 end ) as c5
    from DATE_DIM D, INCIDENT_F I
    where ( D.DATE_KEY = I.DATE_KEY (+) ) and ( D.DT_YEAR = 2010 and I.INC_EMP_GROUP = 'CONTRACTOR' )
    group by D.DT_MONTH_NUM, D.DT_MONTH_NAME, I.INC_TYPE, I.INC_EMP_GROUP
    order by c2
    You can see that the outer syntax (+) is applied to the join, but not to the filter on I.INC_EMP_GROUP. If I take this query and drop it in something like SQL Developer, it only returns the months with data. If I throw the (+) after I.INC_EMP_GROUP like I'd do if writing this by hand, the desired zero-months results pop back in.
    I have already searched the forums and while lots of people seem to have asked this question, the only solutions involve things like trickery in the business layer using dummy fact tables followed by manipulations at the report level etc. Unfortunately I can't rely on these as the system is eventually to be turned over to users who can't be expected to apply various hacks to write reports.
    Anyone ever get to the bottom of getting OBI to apply outer join logic in filters as well, when the filtered table is meant to be outer-joined to?
    Any comments are appreciated.
    John

    I know that this thread is a bit old thought it might be helpful to some one...
    The Issue is, when using Degener@teDimen$ion ( this is !nner joned to FACT tables in BMM) and if any of the dimensions {other than theDegener@teDimen$ion (Let us say Dim X) } have an ()uter join to any of the fact tables, and you were doing your analysis using Degener@teDimen$ion,  Dim X, Measure value you will face the following issues.
    when filtering the analysis on the ()uter join dimension ( Dim X), the IN filter will not work. Reason is that the filter is getting applied to both the Dimension and FACT tables and the values that exist in Dimension Dim X but not in FACT table wont show up.
         The above issue can be fixed by changing the join between the fact and Degener@teDimen$ion from inner to outer. I think this is a bug.. because  it is supposed to filter the fact  table after the entire outer joined result is obtained but not filter the fact table for the Dim X values and do a outer join. I think the BI should be intelligent enough.

  • ORA-326/ORA-334 Physical Standby DB - Not applying logs

    Hi, all, I have a Dataguard, the primary db is a RAC with three nodes, the standby db is a physical standby. the dataguard are all oracle 10.2.0.3 on solaris 9 sparc system
    Now, my standby db did not apply the archivelogs,there are some errors in standby alert log :
    Thu Jan 8 15:44:31 2009
    Errors in file /oracle/admin/xxxx/bdump/whut_mrp0_12863.trc:
    ORA-00326:log begins at change 2984028173, need earlier change 2984013192
    ORA-00334:archived log '+DGARCH/whut/3_22648_611942629.dbf'
    Managed Standby Recovery not using Real Time Apply
    Recovery interrupted!
    Thu Jan 8 15:44:34 2009
    Errors in file /export/home/oracle/admin/whut/bdump/whut_mrp0_12863.trc:
    ORA-00326:log begins at change 2984028173, need earlier change 2984013192
    ORA-00334:archived log '+DGARCH/whut/3_22648_611942629.dbf'
    Thu Jan 8 15:44:34 2009
    MRP0: Background Media Recovery process shutdown (whut)
    and the archivelogs on the standby db like this :
    NAME APP DEL
    +DGARCH/whut/3_22651_611942629.dbf                           NO  NO
    +DGARCH/whut/3_22650_611942629.dbf                           NO  NO
    +DGARCH/whut/3_22649_611942629.dbf                           NO  NO
    +DGARCH/whut/3_22648_611942629.dbf                           NO  NO
    +DGARCH/whut/3_22648_611942629.dbf                           NO  NO
    +DGARCH/whut/3_22648_611942629.dbf                           NO  YES
    +DGARCH/whut/3_22291_611942629.dbf                           YES YES
    +DGARCH/whut/2_62553_611942629.dbf                           NO  NO
    +DGARCH/whut/2_62552_611942629.dbf                           NO  NO
    +DGARCH/whut/2_62551_611942629.dbf                           NO  NO
    +DGARCH/whut/2_62550_611942629.dbf                           NO  NO
    query the first_change# on the standby db like this :
    SEQUENCE# FIRST_CHANGE# APP ARC
    22646 2983721221 NO YES
    22647 2983911304 NO YES
    22648 2984028173 NO YES
    23813 2984013365 NO YES
    23814 2984118027 NO YES
    62546 2984027708 NO YES
    SEQUENCE# FIRST_CHANGE# APP ARC
    62547 2984163823 NO YES
    23815 2984132128 NO YES
    23816 2984312713 NO YES
    62548 2984255538 NO YES
    62549 2984312692 NO YES
    22649 2984028196 NO YES
    23817 2984351070 NO YES
    then ,how to fix the dataguard and apply the archivelog on standby db ?
    why I can found 2984028173 with 22648,but can not found 2984013192 ??
    and why there have three 22648 with different applied status and deleted status on standby db ???
    Thanks all.

    Thank you for your reply.
    the trc file like this:
    /oracle/admin/xxx/bdump/xxx_mrp0_12863.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /oracle/product/10.2.0/database
    System name:     SunOS
    Node name:     stdb
    Release:     5.9
    Version:     Generic_122300-25
    Machine:     sun4u
    Instance name: xxx
    Redo thread mounted by this instance: 1
    Oracle process number: 27
    Unix process pid: 12863, image: oracle@stdb (MRP0)
    *** SERVICE NAME:() 2009-01-08 15:44:24.179
    *** SESSION ID:(197.3) 2009-01-08 15:44:24.179
    ARCH: Connecting to console port...
    *** 2009-01-08 15:44:24.180 61287 kcrr.c
    MRP0: Background Managed Standby Recovery process started
    *** 2009-01-08 15:44:29.191 1103 krsm.c
    Managed Recovery: Initialization posted.
    *** 2009-01-08 15:44:29.192 61287 kcrr.c
    Managed Standby Recovery starting Real Time Apply
    Recovery target incarnation = 5, activation ID = 721050634
    Influx buffer limit = 152383 (50% x 304766)
    Successfully allocated 3 recovery slaves
    Using 367 overflow buffers per recovery slave
    Start recovery at thread 3 ckpt scn 2984013192 logseq 22648 block 2
    *** 2009-01-08 15:44:31.181
    Media Recovery add redo thread 3
    *** 2009-01-08 15:44:31.181
    Media Recovery add redo thread 1
    *** 2009-01-08 15:44:31.182
    Media Recovery add redo thread 2
    *** 2009-01-08 15:44:31.184 1103 krsm.c
    Managed Recovery: Active posted.
    *** 2009-01-08 15:44:31.838
    Media Recovery Log +DGARCH/whut/3_22648_611942629.dbf
    *** 2009-01-08 15:44:31.851 61287 kcrr.c
    MRP0: Background Media Recovery terminated with error 326
    ORA-00326: log begin at 2984028173, need earlier 2984013192
    ORA-00334: archivelog: '+DGARCH/whut/3_22648_611942629.dbf'
    *** 2009-01-08 15:44:31.851 61287 kcrr.c
    Managed Standby Recovery not using Real Time Apply
    *** 2009-01-08 15:44:31.851
    Media Recovery drop redo thread 3
    *** 2009-01-08 15:44:31.851
    Media Recovery drop redo thread 1
    *** 2009-01-08 15:44:31.851
    Media Recovery drop redo thread 2
    *** 2009-01-08 15:44:34.269 1103 krsm.c
    Managed Recovery: Not Active posted.
    ORA-00326: log begin at 2984028173,need earlier 2984013192
    ORA-00334: archivelog: '+DGARCH/whut/3_22648_611942629.dbf'
    ARCH: Connecting to console port...
    *** 2009-01-08 15:44:34.359 61287 kcrr.c
    MRP0: Background Media Recovery process shutdown
    *** 2009-01-08 15:44:34.359 1103 krsm.c

  • Physical query not accessing Fact Table/Column

    Hi,
    I'm facing a weired issue. I have a report with 32 columns. 22 columns are from 8 dimensions and 10 columns from 3 Facts.
    But while observing the Physical query. Its not touching 1 particular Column coming from 1 Fact Table.
    So, in the query only 2 Fact columns are there and in the report its always Null value.
    When I'm adding a filter on that Fact Column to force Analytics to go and join with that Fact Table, Its not including that Fact Table/Column and producing a very funny query like the following:
    SELECT
    COLUMNS....
    FROM
    TABLES (8 DIMENSION AND 2 FACTS)
    GROUP BY COLUMNS....
    HAVING cast(NULL as DOUBLE PRECISION )>1234
    ================================
    "cast(NULL as DOUBLE PRECISION )>1234" - this is the filter, I have added on that Fact Column.
    Note- It may be because of RPD configurations/joins. But the system (Siebel Analytics 7.8) is in production for 2 years and 500 users using it and nobody reported any issue like this before.
    Can anyone please give me some helpful hint, idea, what is happening?
    Thanks in Advance
    Regards
    Sudipta

    Hi Kishore,
    Thanks for your reply.
    However, I did the analysis and found following, please let me know if your perspective is falling in the same line or not.
    Scenario:
    Suppose all the columns i'm trying to fetch, are coming from 5 dimensions [d1,d2,d3,d4,d5] (some of them are aliased table) and 3 fact tables [f1,f2,f3]
    Now, the report is not fetching data for c1 column which is coming from f3 fact table. Even f3 table is not included in the physical query.
    Now what i found that, there is a dimension suppose d3 which is not having any direct join with f3, but other facts like f1,f2 have joins with d3 table.
    If i remove the columns coming from d3 dimension from report, then f3 fact columns are getting populated in report.
    Problem:
    I need to provide a single physical query for that report, while those report columns are defined by the business.
    Questions:
    1. So is it really possible to create a query for that kind of report without changing the RPD design?
    2. If no, then is the only solution to split that report (i'm thinking) into 2-3 sub reports?
    Thanks all of you for replying and providing your thoughts.
    Regards
    Sudipta

  • All logs received but not applied | Physical Standby Database

    All,
    Need your help....
    We have physical standby database setup as below
    Primary : 2 node RAC
    Stdby : Standalone physical standby database.
    When I verify the stdby database status, I could see all the logs are received from primary but still not applied many.. Could any one please help me what is the issue and how to resolve it ...?
    Primary :
    =====
    SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
    FROM V$ARCHIVED_LOG
    WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
    ORDER BY 1 2 3 4 ;
    Thread Last Sequence Generated
    1 8073
    1 8073
    2 4521
    2 4521
    stdby:
    ====
    SQL> SELECT ARCH.THREAD# "Thread",
    2 ARCH.SEQUENCE# "Last Sequence Received",
    3 APPL.SEQUENCE# "Last Sequence Applied",
    4 (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
    5 FROM
    6 (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN
    7 (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
    8 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN
    (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
    9 10 WHERE ARCH.THREAD# = APPL.THREAD# ORDER BY 1;
    Thread Last Sequence Received Last Sequence Applied Difference
    1 8073 8055 18
    2 4521 4510 11
    --Below are tailed messages from standby alert log:
    Fri Nov 04 10:45:15 2011
    ARCH: Archival stopped, error occurred. Will continue retrying
    ORACLE Instance BWFCCSTD - Archival Error
    ORA-16014: log 6 sequence# 8058 not archived, no available destinations
    ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
    ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
    Fri Nov 04 10:50:15 2011
    Archiver process freed from errors. No longer stopped
    Fri Nov 04 10:50:15 2011
    ARCH: Archival stopped, error occurred. Will continue retrying
    ORACLE Instance BWFCCSTD - Archival Error
    ORA-16014: log 6 sequence# 8058 not archived, no available destinations
    ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
    ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
    Fri Nov 04 10:50:15 2011
    Archiver process freed from errors. No longer stopped
    Fri Nov 04 10:55:15 2011
    ARCH: Archival stopped, error occurred. Will continue retrying
    ORACLE Instance BWFCCSTD - Archival Error
    ORA-16014: log 6 sequence# 8058 not archived, no available destinations
    ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
    ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
    Fri Nov 04 11:00:15 2011
    Archiver process freed from errors. No longer stopped
    Fri Nov 04 11:00:15 2011
    ARCH: Archival stopped, error occurred. Will continue retrying
    ORACLE Instance BWFCCSTD - Archival Error
    ORA-16014: log 6 sequence# 8058 not archived, no available destinations
    ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
    ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
    Fri Nov 04 11:00:15 2011
    Archiver process freed from errors. No longer stopped
    Fri Nov 04 11:05:16 2011
    ARCH: Archival stopped, error occurred. Will continue retrying
    ORACLE Instance BWFCCSTD - Archival Error
    ORA-16014: log 6 sequence# 8058 not archived, no available destinations
    ORA-00312: online log 6 thread 1: '+ASM_DATA01/bwfccstd/onlinelog/group_6.418.766235259'
    ORA-00312: online log 6 thread 1: '+ASM_FRA01/bwfccstd/onlinelog/group_6.307.766235263'
    Fri Nov 04 11:05:16 2011
    Archiver process freed from errors. No longer stopped

    Primary:
    =====
    SQL> archive log list;
    Database log mode Archive Mode
    Automatic archival Enabled
    Archive destination +ASM_FRA01
    Oldest online log sequence 8073
    Next log sequence to archive 8074
    Current log sequence 8074
    SQL>
    Stdby:
    =====
    SQL> archive log list;
    Database log mode Archive Mode
    Automatic archival Enabled
    Archive destination ?/dbs/arch
    Oldest online log sequence 8074
    Next log sequence to archive 0
    Current log sequence 8074
    Enough space is available :
    =================
    SQL> set lines 180 pages 50000;
    SQL> set lines 100
    col name format a60
    select name
    , floor(space_limit / 1024 / 1024) "Size MB"
    , ceil(space_used / 1024 / 1024) "Used MB"
    from v$recovery_file_dest
    order by nameSQL> SQL> 2 3 4 5 ;
    NAME Size MB Used MB
    +ASM_FRA01                                                        70000        531
    Edited by: 889828 on 2011/11/04 2:26 AM

  • Addition of Filters on Answers changing the physical query

    Hello,
    I have three Dimensions D1, D2 and D3 joining (as left outer join in BM layer, i have a requirement where i have to show all the records from Dimension) to a common Fact 'F'
    I am trying to build a report based on columns from 3 dimensions.
    The report gives a correct output, and returns a single physical query.
    If i add a filter condition from say D1 on the report like D1.Col = <something> on the answers report, the physical
    query splits in two and then join the two query to give the result.
    Any thoughts what could have gone wrong here?
    Thank You

    hi..
    First tell me all dimensions are left outer with fact?
    Then, check your fact table LTS levels..
    If you have created hierarchies for dimensions, and all dimensions are directly connected to the facts... then, mention the levels for particular fact LTS to detail level for all dimensions. .
    Check this...

  • Additional columns in physical query

    hi,
    OBIEE 11.1.1.6
    This is continuation from my old post for strange behavior of logical to physical query transformation.
    Floor applied during
    I got additional column during the transformation from logical SQL to physical SQL
    select Distinct 0 as c1, case when .... as c2 from ....where 0 as c1 is additional column which I am getting.
    Did anyone experienced with the same issue? any solution for to overcome this issue?
    Thanks,
    Hesh

    Based on default OOB query settings this get generate, generally with WITH clause. No point to trace it for the reasons untill this is not affecting to your results.
    I would suggest just ignore ;)
    Pls mark as correct/helpful if helps

  • My Active dataguard is not applying archives.

    Dears,
    Following is my setup
    =====================
    Primary:
    prod on RAC with 2 nodes
    Database : Oracle 11.2.0.3
    OS OEL 5.7
    storage : ASM
    +DATADG
    +FLASHDG
    Standby:
    sync on single node
    Database : Oracle 11.2.0.3
    storage : ASM
    +DATADG
    +FLASHDG
    I've configured Active dataguard successfully and was able to apply archivelogs successfully instantly.
    Archive log locations are +FLASHDG/prod/ARCHIVELOG/ AND /u02/arch  --- on primary
    Archive log locations are +FLASHDG/stby/ARCHIVELOG/ AND /u02/arch  --- on standby
    On Standby
    ===========
    SQL> select 'Using Active Data Guard' ADG from v$managed_standby m,v$database d where m.process like 'MRP%' ;
    ADG
    Using Active Data Guard
    SQL> select open_mode,database_role,PROTECTION_MODE,PROTECTION_LEVEL from v$database;
    OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
    READ ONLY WITH APPLY PHYSICAL STANDBY MAXIMUM PERFORMANCE MAXIMUM PERFORMANCE
    SQL>
    Upto now everything is ok, means same data is sync on primary and standby. As my archive location was getting full, i've used this SQL query to clean them
    SELECT 'alter diskgroup '||dg.name||' drop file
    ''+'||dg.name||''||SYS_CONNECT_BY_PATH(al.name,'/')||''';'
    FROM v$asm_alias al, v$asm_file fi, v$asm_diskgroup dg
    WHERE al.file_number = fi.file_number(+)
    AND al.group_number = dg.group_number
    AND fi.type = 'ARCHIVELOG'
    START WITH alias_index = 0
    CONNECT BY PRIOR al.reference_index = al.parent_index;
    SELECT 'alter diskgroup '||dg.name||' drop file
    ''+'||dg.name||''||SYS_CONNECT_BY_PATH(al.name,'/')||''';'
    FROM v$asm_alias al, v$asm_file fi, v$asm_diskgroup dg
    WHERE al.file_number = fi.file_number(+)
    AND al.group_number = dg.group_number
    AND fi.type = 'BACKUPSET'
    START WITH alias_index = 0
    CONNECT BY PRIOR al.reference_index = al.parent_index;
    In order to delete ARCHIVE logs which are stored in ASM FLASHDG, which will have a type of "ARCHIVELOG" and "BACKUPSET" i've used this above two queries.
    After performing this steps , my Active dataguard is not applying archives.
    On the primary server, check the latest archived redo log
    SELECT sequence#, first_time, next_time
    FROM v$archived_log
    ORDER BY sequence#;
    2809 16-APR-13 16-APR-13
    2809 16-APR-13 16-APR-13
    2809 16-APR-13 16-APR-13
    2810 16-APR-13 16-APR-13
    2810 16-APR-13 16-APR-13
    2810 16-APR-13 16-APR-13
    2811 16-APR-13 16-APR-13
    2811 16-APR-13 16-APR-13
    2811 16-APR-13 16-APR-13
    2812 16-APR-13 16-APR-13
    2812 16-APR-13 16-APR-13
    2812 16-APR-13 16-APR-13
    2813 16-APR-13 16-APR-13
    2813 16-APR-13 16-APR-13
    2814 16-APR-13 16-APR-13
    2814 16-APR-13 16-APR-13
    2815 16-APR-13 16-APR-13
    2815 16-APR-13 16-APR-13
    2816 16-APR-13 16-APR-13
    2816 16-APR-13 16-APR-13
    2817 16-APR-13 16-APR-13
    2817 16-APR-13 16-APR-13
    2818 16-APR-13 16-APR-13
    2818 16-APR-13 16-APR-13
    2819 16-APR-13 16-APR-13
    2819 16-APR-13 16-APR-13
    2820 16-APR-13 16-APR-13
    2820 16-APR-13 16-APR-13
    2821 16-APR-13 16-APR-13
    2821 16-APR-13 16-APR-13
    2822 16-APR-13 16-APR-13
    2822 16-APR-13 16-APR-13
    2823 16-APR-13 16-APR-13
    2823 16-APR-13 16-APR-13
    2824 16-APR-13 16-APR-13
    2824 16-APR-13 16-APR-13
    2825 16-APR-13 16-APR-13
    2825 16-APR-13 16-APR-13
    2826 16-APR-13 16-APR-13
    2826 16-APR-13 16-APR-13
    2827 16-APR-13 16-APR-13
    2827 16-APR-13 16-APR-13
    2828 16-APR-13 16-APR-13
    2828 16-APR-13 16-APR-13
    2829 16-APR-13 16-APR-13
    2829 16-APR-13 16-APR-13
    2830 16-APR-13 16-APR-13
    2830 16-APR-13 16-APR-13
    2831 16-APR-13 16-APR-13
    2831 16-APR-13 16-APR-13
    2832 16-APR-13 16-APR-13
    2832 16-APR-13 16-APR-13
    2833 16-APR-13 16-APR-13
    2833 16-APR-13 16-APR-13
    2834 16-APR-13 16-APR-13
    2834 16-APR-13 16-APR-13
    2835 16-APR-13 16-APR-13
    2835 16-APR-13 16-APR-13
    2836 16-APR-13 16-APR-13
    2836 16-APR-13 16-APR-13
    2837 16-APR-13 16-APR-13
    2837 16-APR-13 16-APR-13
    2838 16-APR-13 16-APR-13
    2838 16-APR-13 16-APR-13
    2839 16-APR-13 16-APR-13
    2839 16-APR-13 16-APR-13
    2840 16-APR-13 16-APR-13
    2840 16-APR-13 16-APR-13
    2841 16-APR-13 16-APR-13
    2841 16-APR-13 16-APR-13
    2842 16-APR-13 16-APR-13
    2842 16-APR-13 16-APR-13
    2843 16-APR-13 16-APR-13
    2843 16-APR-13 16-APR-13
    2844 16-APR-13 16-APR-13
    2844 16-APR-13 16-APR-13
    2845 16-APR-13 16-APR-13
    2845 16-APR-13 16-APR-13
    2846 16-APR-13 16-APR-13
    2846 16-APR-13 16-APR-13
    Check the new archived redo log has arrived at the standby server and been applied.
    SELECT sequence#, first_time, next_time, applied
    FROM v$archived_log
    ORDER BY sequence#;
    2801 15-APR-13 15-APR-13 YES
    2801 15-APR-13 15-APR-13 YES
    2802 15-APR-13 15-APR-13 YES
    2802 15-APR-13 15-APR-13 YES
    2803 15-APR-13 15-APR-13 YES
    2803 15-APR-13 15-APR-13 YES
    2804 15-APR-13 15-APR-13 YES
    2804 15-APR-13 15-APR-13 YES
    2805 15-APR-13 15-APR-13 YES
    2805 15-APR-13 15-APR-13 YES
    2806 15-APR-13 15-APR-13 YES
    2806 15-APR-13 15-APR-13 YES
    2807 15-APR-13 15-APR-13 YES
    2807 15-APR-13 15-APR-13 YES
    2808 15-APR-13 16-APR-13 YES
    2808 15-APR-13 16-APR-13 YES
    2809 16-APR-13 16-APR-13 YES
    2809 16-APR-13 16-APR-13 YES
    2810 16-APR-13 16-APR-13 YES
    2810 16-APR-13 16-APR-13 YES
    2811 16-APR-13 16-APR-13 YES
    2811 16-APR-13 16-APR-13 YES
    2812 16-APR-13 16-APR-13 IN-MEMORY
    2812 16-APR-13 16-APR-13 YES
    So could anyone help me to resolve this issue. Anticipating your response at the earliest.
    Regards,
    VIKHAR
    Edited by: VIKHARAHMED on Apr 16, 2013 9:38 AM

    Here is the alert log file
    Media Recovery Log +FLASHDG/stby/archivelog/2013_04_16/thread_2_seq_1476.1987.812900733
    Tue Apr 16 18:56:42 2013
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[1]: Assigned to RFS process 16803
    RFS[1]: Selected log 12 for thread 2 sequence 1485 dbid 220323208 branch 808484882
    Tue Apr 16 18:56:42 2013
    RFS[2]: Assigned to RFS process 16807
    RFS[2]: Opened log for thread 2 sequence 1484 dbid 220323208 branch 808484882
    Archived Log entry 6324 added for thread 2 sequence 1484 rlc 808484882 ID 0xd21a288 dest 10:
    Tue Apr 16 19:09:02 2013
    RFS[1]: Selected log 11 for thread 2 sequence 1486 dbid 220323208 branch 808484882
    Tue Apr 16 19:09:02 2013
    Archived Log entry 6325 added for thread 2 sequence 1485 ID 0xd21a288 dest 1:
    Archived Log entry 6326 added for thread 2 sequence 1485 ID 0xd21a288 dest 2:
    Tue Apr 16 19:12:23 2013
    RFS[1]: Selected log 12 for thread 2 sequence 1487 dbid 220323208 branch 808484882
    Tue Apr 16 19:12:23 2013
    Archived Log entry 6327 added for thread 2 sequence 1486 ID 0xd21a288 dest 1:
    Archived Log entry 6328 added for thread 2 sequence 1486 ID 0xd21a288 dest 2:
    Tue Apr 16 19:14:41 2013
    "alert_stby.log" 845L, 33990C 782,1 94%
    Tue Apr 16 19:17:27 2013
    Archived Log entry 6331 added for thread 2 sequence 1488 ID 0xd21a288 dest 1:
    Archived Log entry 6332 added for thread 2 sequence 1488 ID 0xd21a288 dest 2:
    Tue Apr 16 19:25:51 2013
    RFS[1]: Selected log 11 for thread 2 sequence 1490 dbid 220323208 branch 808484882
    Tue Apr 16 19:25:51 2013
    Archived Log entry 6333 added for thread 2 sequence 1489 ID 0xd21a288 dest 1:
    Archived Log entry 6334 added for thread 2 sequence 1489 ID 0xd21a288 dest 2:
    Tue Apr 16 19:51:02 2013
    RFS[1]: Selected log 12 for thread 2 sequence 1491 dbid 220323208 branch 808484882
    Tue Apr 16 19:51:02 2013
    Archived Log entry 6335 added for thread 2 sequence 1490 ID 0xd21a288 dest 1:
    Archived Log entry 6336 added for thread 2 sequence 1490 ID 0xd21a288 dest 2:
    Tue Apr 16 20:37:12 2013
    RFS[1]: Selected log 11 for thread 2 sequence 1492 dbid 220323208 branch 808484882
    Tue Apr 16 20:37:12 2013
    Archived Log entry 6337 added for thread 2 sequence 1491 ID 0xd21a288 dest 1:
    Archived Log entry 6338 added for thread 2 sequence 1491 ID 0xd21a288 dest 2:
    Tue Apr 16 21:08:23 2013
    RFS[1]: Selected log 12 for thread 2 sequence 1493 dbid 220323208 branch 808484882
    Tue Apr 16 21:08:23 2013
    Archived Log entry 6339 added for thread 2 sequence 1492 ID 0xd21a288 dest 1:
    Archived Log entry 6340 added for thread 2 sequence 1492 ID 0xd21a288 dest 2:
    Tue Apr 16 22:16:06 2013
    RFS[1]: Selected log 11 for thread 2 sequence 1494 dbid 220323208 branch 808484882
    Tue Apr 16 22:16:06 2013
    Archived Log entry 6341 added for thread 2 sequence 1493 ID 0xd21a288 dest 1:
    Archived Log entry 6342 added for thread 2 sequence 1493 ID 0xd21a288 dest 2:
    Tue Apr 16 22:31:46 2013
    RFS[1]: Selected log 12 for thread 2 sequence 1495 dbid 220323208 branch 808484882
    Tue Apr 16 22:31:46 2013
    Archived Log entry 6343 added for thread 2 sequence 1494 ID 0xd21a288 dest 1:
    Archived Log entry 6344 added for thread 2 sequence 1494 ID 0xd21a288 dest 2:
    Wed Apr 17 09:31:59 2013
    RFS[1]: Selected log 11 for thread 2 sequence 1496 dbid 220323208 branch 808484882
    Wed Apr 17 09:32:00 2013
    Archived Log entry 6345 added for thread 2 sequence 1495 ID 0xd21a288 dest 1:
    Archived Log entry 6346 added for thread 2 sequence 1495 ID 0xd21a288 dest 2:

  • Archive not applying on dr database

    Hi All,
    Archive log are transferring from primary db to standby db.but archive are not applying on dr database.
    Below alert log of dr database
    ORA-16037: user requested cancel of managed recovery operation
    Fri Jan 14 17:05:40 2011
    MRP0: Background Media Recovery process shutdown (QMSSTB)
    Fri Jan 14 17:05:41 2011
    Managed Standby Recovery Canceled (QMSSTB)
    Fri Jan 14 17:05:41 2011
    Completed: alter database recover managed standby database cancel
    Fri Jan 14 17:07:56 2011
    alter database recover managed standby database disconnect from session
    Fri Jan 14 17:07:56 2011
    Attempt to start background Managed Standby Recovery process (QMSSTB)
    MRP0 started with pid=19, OS id=823510
    Fri Jan 14 17:07:56 2011
    MRP0: Background Managed Standby Recovery process started (QMSSTB)
    Managed Standby Recovery not using Real Time Apply
    parallel recovery started with 2 processes
    Fri Jan 14 17:08:01 2011
    Waiting for all non-current ORLs to be archived...
    Clearing online redo logfile 1 /oradb/oradata/QMSPROD/redo01.log
    Clearing online log 1 of thread 1 sequence number 3401
    Fri Jan 14 17:08:01 2011
    Errors in file /oradb/oradata/QMSPROD/bdump/qmsstb_mrp0_823510.trc:
    ORA-19527: physical standby redo log must be renamed
    ORA-00312: online log 1 thread 1: '/oradb/oradata/QMSPROD/redo01.log'
    Clearing online redo logfile 1 complete
    Media Recovery Waiting for thread 1 sequence 3401 (in transit)
    Fri Jan 14 17:08:02 2011
    Completed: alter database recover managed standby database disconnect from session

    Hi all,
    Dr database query
    SQL> select sequence#,applied from v$archived_log order by 1;
    SEQUENCE# APP
    3401 NO
    3401 NO
    3402 NO
    3403 NO
    3404 NO
    3405 NO
    3406 NO
    3407 NO
    3408 NO
    3409 NO
    3410 NO
    SEQUENCE# APP
    3411 NO
    3412 NO
    3413 NO
    3414 NO
    3415 NO
    3416 NO
    3417 NO
    3418 NO
    3419 NO
    3420 NO
    3421 NO
    SEQUENCE# APP
    3422 NO
    3423 NO
    3424 NO
    SQL> select process,status,sequence# from v$managed_standby
    2 ;
    PROCESS STATUS SEQUENCE#
    ARCH CONNECTED 0
    ARCH CONNECTED 0
    MRP0 WAIT_FOR_LOG 3401
    RFS IDLE 3401
    RFS RECEIVING 0
    RFS RECEIVING 0

Maybe you are looking for

  • Data point sets for the interpolate 1D array vi

    The HELP info for Interpolate 1D Array states that you can input an array of numbers OR POINTS. What format would you input points, or "data point sets" as the help states?

  • How about the Graphic Performance?

    Hello all! May someone can help me to get that clarified ... I have a MacMini with Thunderbolt connection. Latley I started to use RC Flight simulator which challenges the video card of my MacMini pretty much. How about a Thunderbolt Display? Will TB

  • Need SAPGUI for Mac OS 10.4.11 (Tiger)

    First, what is the recommended version of SAPGUI which will run in Mac OS 10.4.11 (Tiger). Would it be SAPGUI 7.1? And secondly, where can I download a version which will work in Tiger running on an Intel-based Mac? I would be so grateful for anyone'

  • Convert XSD to POJO

    Hi all, I would like to convert a xml schema file (.xsd) to corresponding JAVA objects without using any 3pps like JAXB or XMLBeans. I can probably write down the POJO (getters and setters) for each element/attribute corresponding to the xsd file. Bu

  • Elements and Tablets

    Does anyone know if you can upload your current Elements (vs 9) to a tablet as long as the tablet has suffient processor?  Does anyone know a specific tablet that will work?