Final Cut not working anymore

So I updated it last night and now when I opened it up again it said I needed to type in my name and code from the box. When I did it keeps saying the code is not valid. What does this mean?

Same thing happened to me, funny thing was, it only affected FCP, not the other Studio apps. I deleted that file as indicated in the Apple thread, works fine now.
Are you SURE you're using a valid serial number?

Similar Messages

  • QT file from final cut not working on other macs

    Hi,
    Sorry to anyone who's seen this question under a different category, but I have to do a presentation tomorrow and I'm freaking out that this doesn't work, I wasn't quite sure what program's fault it was.
    I have a .mov file that was encoded from Final Cut (version 5.1.4) (h.264) on a mac pro running Tiger and QT version 7.5.5 and is a .mov file
    I am trying to play it on a G4 PowerBook running 10.3.9, QT version 7.4 and it wont play the movie, it keeps dropping frames and generally playing very shakily and sometimes crashing, I tried it on a G4 I-Mac (with the same specs) too, and its the same problem. Therefore I can only presume that it must be something to do with the OS, or the QT version or something else entirely maybe.
    Thanks loads to anyone who can help
    Sam

    Sorry to anyone who's seen this question under a different category, but I have to do a presentation
    tomorrow and I'm freaking out that this doesn't work, I wasn't quite sure what program's fault it was.< </div>
    Your fault and yours alone.
    You have not provided any information that actually help us help you.
    What codec are you trying to use? ".mov" does not tell us anything useful. What is the playback application on the host machine? Are you playing form a CD, a DVD, or the hard drive?
    bogiesan

  • Both cameras on my iPod touch generation 4 will not work anymore. Is there a way I can send it back to get it fixed? Thank you ..

    Both cameras (front/back) will not work anymore. I would tap on the camera app, and the camera shutters would stay closed for a while and when it finally opens, it leaves a full blank screen. Is there a way I could send it in and get that repaired?

    GEESAR wrote:
    hi there
    is there anyway i can use the unlimited data i have from my mobile network provider (o2)  on this i pod touch 4 generation the latest model  NO.
    and does the sim from my mobile network o2 be used in the ipod touch4 to use the unlimited minuites i have from my mobile network provider  NO
    if not then how do i use the unlimited data ive been given through my mobile network provider please tell me most kindly  Purchase a mobile WiFi hotspot (Sometimes referred to as a MyFi), or have that service added to your cell phone.
       geeeeesar also how does this ipod touch4  pick up the  wifi free of charge is this possible or do you have to pay for limited data to access internet Your iPod can connect to any unsecured WiFi network that you are currently within range of.  These networks can be found at your local library, some city/county government buildings, doctor's offices, Denny's, IHOP, Starbuck's, Home Depot, Lowes, Best Buy, and other merchants.  Your iPod can connect to any secured WiFi network that you are within range of and that you have the password for. 
    thanks  can i pod touch 4 generation download movies too  please help thank u very much....  Yes.  If your iPod has a WiFi connection and you have an account with a service like NetFlix....

  • Mac os 10.4.10 software update problem -- my mac does not work anymore :(

    hello!
    i have a powerbook G4- PPC. just today, i did a software update of my OS to 10.4.10 (it was the available update version according to the automatic uptae) and during the final stage of the installation, it says "a problem was encountered...installation package is moved to trash"
    when i browsed my mac, my apps does not work anymore!!! they just bounce from the dock when i clicked it but it won't open any window. i emptied the trash and restarted my mac but sadly, it just boot but won't continue to the log in part, only in the silver window with the apple logo and mac os x tiger... and the mouse just turns into the color wheel. i waited for 30 mins and nothing happened.
    i don't have a startup disc because the mac is a gift and it was long time ago. is ther a software i can use to fix or revert the changes of the unsuccessful OS update? why is there always a problem when i do OS update? isn't apple software stable?
    My mac problems' driving me crazy!!!

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695

  • Every time the anouncement of 10 year Thunderbird appears; when i read one mail: Thunderbird "does not work anymore"

    My thunderbirdbox contains 2 mailboxes; they appear together on the screen the same time.
    I have this "construction" for several years without problems.
    Now, with the 10year celebration of Tunderbird, when i open Thunderbird , every time there is the announcement + questioning if i can volunteer ( I whish I could....). The message covers a part of my second box....
    When i want to read one of my mails, thunderbird stocks and above in the screen the message appears Thunderbird does not work anymore. There is a menu what i want to do and i choose : close the program. Afterwards i open Thunderbird again and i can do everything i want to do.... Strange it not it?

    I've had the Mail app misbehave from time to time. Not so much lately though. But when Mail misbehaved I quit the mail app like I describe here. After that I reset my iPad. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. The reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot. Finally try the Mail app again.

  • Will final cut express work with os maverick

    I am running mountain lion and FCE. will final cut express work with mavericks.?

    A follow-up to my previous post.  FCE 4.0.1 is working fine with Mavericks on the computer at my church (we use it to video-tape sermons and masses for YouTube). 
    A few weeks ago, I purchased a copy of FCE 4.0 from Amazon (one of only two left).  It would NOT work with Mavericks, and there was no upgrade available on the App Store (the only source of software upgrades with Mavericks).  So, I installed FCE on another iMac running Lion.  It installed just fine, and when I went to "Check for New Software" in "the apple", it found the upgrade to 4.0.1, installed it, I copied it to a blank DVD, and installed that on my iMac running Mavericks.  It is working fine.  (HINT TO APPLE: Can we please go back to the simple "Check for Software Updates" instead of the App Store?  Ever since Steve Jobs died everything Apple has become more complicated, not intuitively simple as he made it.)

  • Will Final Cut Express work on a Macbook Core Duo

    I have a 2006 Macbook 2ghz Core Duo with 2gig of Ram. Will Final Cut Express work on this? Will the integrated graphics card affect performance?

    hey there 12frets,
    FCE should run w/out major probs. you should even be able to run a 2nd display up to 23", which would be very handy as the Canvass(playback) window will be rather small on a 13" display.
    FCE System Requirements
    A Mac computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, Intel Core 2 Duo, or Intel Xeon processor
    For AVCHD: A Mac computer with an Intel processor
    1GB of RAM or more
    An AGP or PCI Express graphics card compatible with Quartz Extreme; or an Intel GMA integrated graphics processor in a MacBook or Mac mini computer
    Some FxPlug filters are not compatible with integrated Intel graphics processors.
    A display with 1024-by-768 resolution or higher
    A DVD drive for installation
    Mac OS X v10.4.10 or later
    QuickTime 7.2 or later
    500MB of disk space to install Final Cut Express and LiveType
    Additional 500MB to install LiveType content
    good luck.

  • Final Cut wont work on a G5?

    Maybe some one can help me... I have final cut pro hd.. I installed it on my mac and when i went to start it up it said that it could not because I did not have an agp card... I have the pci express...
    I called apple before I purchased the G5 and asked them if Final cut would work and they assured me that it would.
    Does anyone know how to make this work?
    Mac G5   Mac OS X (10.4.5)  

    as rule, we should all try to use the SEARCH function before posting to avoid endless repetition ...
    #29: Need AGP Graphics card
    Shane's Stock Answer #29
    You either need to either:
    1) use the following hack -
    http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
    or
    2) Upgrade to FCP 5
    http://docs.info.apple.com/article.html?artnum=302667
    thanks go to Shane Ross
    cheers
    Andy

  • Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?

    Please take the Mac to  Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • Muse not working anymore

    Hello, Alex here
    since the last update Adobe Muse is not working anymore for me. The sites open normally but then the Master Pages don't load properly and it freezes all the time.
    Does it ring a bell for someone?
    Thanks a lot in advance.
    Alex

    Hi Alex,
    Could you please let me know,
    1. What is the size of your .muse file?
    2 Try to duplicate the .muse file, open it, and try to reduce child pages, and see if you get some improvement.
    3. Do you have asset on Network drive, if yes, add these asset to local drive and then use them, see if that helps.
    4. Are you using Mac/Windows?
    Please let me know these details, and I will try to investigate.

  • Satellite U400 - the webcam does not work anymore

    Hello guys here is my sudden probloema!
    About a year ago I purchased a laptop
    TOSHIBA - Satellite U400
    with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
    For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
    As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
    I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
    the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
    Gan you help me?
    Graziee

    Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
    At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
    Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

  • TouchPad lock key does not work anymore on Dell XPS L401X

    Hi everyone,
    On my Dell XPS L401X laptop, there is a key to lock/unlock the touchpad. It used to work fine on Windows and on new fresh install ArchLinux, but now it does not work anymore. If I remember correctly, I did not change, configure any shortcut so far.
    Any hint to fix this problem?
    Many thanks!
    Tinh

    Try mapping the button as shown here: https://wiki.archlinux.org/index.php/To … are_Toggle
    I'm sorry i can't help more.

  • TV does not work anymore on Qosmio G10

    Good morning,
    TV does not work anymore, may be due to an update. It has been working OK before.
    When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
    -Intervideo WinDVD creator is installed.
    -TV PCI tuner seems to work properly (as per hardware status)
    Which files can be missing? What needs to be done?
    Any help, suggestions, well appreciated.
    Thank you to anyone answering this message.

    Hello Luciano
    Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
    Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
    Try it at first.

  • My ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    my ipad mini is totally drain and after plug it to regain the power its not working anymore.can somebody knows how to make my ipad work again

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • DVI port not working anymore after latest BIOS update on T410s

    Hi all,
    after installing the most recent BIOS update via ThinkVantage System Update, the DVI port in my T410s does not work anymore. Nvidia and Intel display drivers are in place, and I also checked the BIOS settings, but to no avail. It appears that the DVI port is no longer recognised by the system at all.
    Thanks and cheers!

    Do you mean the DVI port on the docking station?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Maybe you are looking for