Finder Column Resizing Issue

I've noticed that now, in Column view in Finder, if you resize a column to a larger size for example, and then click on a Folder, the next column will be the same size as the previous column that was made wider. However, most of the time, it is just that folder I needed to resize and the subsequent folders, I do not need to. Is there a way to change this behavior?

Hello:
Could you detail a little bit more about the column sizing issue you are having?

Similar Messages

  • Finder Column Resize Field is missing - whitespace instead

    Hi,
    I noticed that the little column resize field on the vertical dividers in Finder (the one with the two vertical lines on it) has gone missing. There's now a whitespace instead, which I can still use to resize the column. So the problem is more of a cosmetic nature, yet those dangling scrollbars look a bit irritating.
    here's a screenshot of it: www.sfu.ca/~msteger/scr1.png
    Somewhat related, the gradient in Safari's title bar is not continuous but has a sudden step just above the bookmarks. www.sfu.ca/~msteger/scr2.png
    I don't recall any particular event after which this issue came up. I recently installed the 10.6.2 Combo Update but that didn't make any difference.
    Thanks for any suggestions.
    Mike

    Hmm... There are some simple troubleshooting steps you can take.
    Be sure you drive is not overly full. Rule of thumb would be over 85%.
    Create a new User go to System Preferences >> Accounts >> "+" (make it an admin acct) and test the apps in this new account, if they work the problem is isolated to your User and not systemwide.
    If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps functions correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    If the issue is systemwide then, you may be able to repair this with the The 10.6.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    -mj

  • Is there still no fix to the column resizing issue?

    I checked the initial bug report about it and didn't see anything. I also didn't see it addressed in the most recent update notes. I know about the zoom workaround but that's really tedious. This is annoying me enough that I'm seriously considering dropping premium until it's fixed.

    Hello:
    Could you detail a little bit more about the column sizing issue you are having?

  • Mavericks Will Not Retain Finder List-View Column Resizing

    I've noticed this to occur at the root level of my hard disk in Finder.  A visual will work best:
    The "User Guides and Information" folder is truncated at the root level of my Hard Disk.  I will then manually resize the column:
    When I close out this window via the red close circle, and re-open, Finder will not remember my custom column view.  It will revert back to the previously truncated state.
    Oddly enough, I've found Finder to correctly preserve custom list view columns when you drill down a level (such as my custom column views inside of my Applications folder, for example).

    I managed to find a solution that sorts the problem out for the time being till maybe Apple rectifies it.  It is to open Finder and have it expanded to fit the screen.  I don't know the proper names of things but in the heading that says Name etc, right click that so that you get a list of other things that can go in that heading, like Date Modified, Date Created etc.
    Tick one or two that you don't need, like Tags for example.  The purpose of those extra headings are to fill the column space at the right hand side of Finder so that it keeps the columns that you DO want on the left hand side kept in the same place.  Once you've got all the headings and columns, move the width of the ones you want to the size that you want, making sure that the ones that you don't want, like Tags, on the right hand side totally fills up the rest of the column space.
    This makes the full page Finder column space full up so that the columns you want don't end up shrinking every time you open Finder.  Return Finder to the size that you usually use, adjust the width of your wanted columns to the size that you want and it should stay in place because the rest of the space in Finder is filled with the unwanted columns you chose, but which are hidden from view on the far right hand side of Finder, if you've got Finder smaller than the full screen, that is.
    Ever since I did this with my columns (in List view) my columns remain where I have set them.  (I hope you understand all that OK).

  • JTable in JPanel last Column resize clips JTable doesnt repaint JPanel

    I have a JTable in a JPanel, when I drag the last column of the JTableHeader (u can see the column resizing as the text of the Table HeaderColumn moves with the drag) the JTable is outside the JPanel. Only when u click on another component and then click back on the JTableHeader does it repaint.
    I have tried jPanel.revalidate(); in the mouseDragged event of MouseMotionListener on the JTableHeader and all manner or repaints and fireTableStructureChanged. But I dont understand the order of events.
    The last bug to fix!!!
    NB I dont want to use scrollpane as its not necessary and as many tables are synchronized with one table it makes repaints less smooth
    Thanks Paul

    Well, I didn't find an answer but I did find a solution.
    The JPanel is the problem. I use it to help with layout which is not obvious in this example.
    As you can see in the code the JTable is placed in a JScrollPane which is place in a JPanel which is placed in a JTabbedPane.
    If I use Box instead of JPanel the JTable in the JScrollPane in the Box in the TabbedPane in the JFrame resizes correclty.
    So although JPanel is resizable with setSize it does not get resized when it's JFrame gets resized.
    I would still like to know why?
    ////////KBS
    JTabbedPane myTP = new JTabbedPane();
    Box myOne = Box.createHorizontalBox();
    Box myTwo = Box.createHorizontalBox();
    myOne.add(pane);
    myTP.add("One", myOne);
    myTP.add("Two", myTwo);
    ////////KBS

  • Matrix column resizing

    Good Afternoon
    Experts:
    Another rough day here my buddy the Matrix.  I desire to not allow a column to be resized.   Is this possible?  I could not find a solution through my coding/testing.
    Any thoughts?
    Thanks,
    Ed

    Good Day
    Thanks for the relpies.  I have applied the concept from the link to resize the column width.  Double-clicking the column line in the heading of the Matrix is now not allowed...column resized back to desired width.  However, that line can still be clicked and pulled to the right to expose the hidden column.  Any idea how I might trap that event?  The et_CLIICK does not work.  Perhaps it is getting by the added code since I am clicking in the header of the Matrix and not a cell of the Matrix.
    What do you think?
    Thanks,
    EJD

  • Com.waveset.util.ConfigurationError: Cannot find columns for table 'object'

    I am trying to install IDM on my own laptop and use MS SQL Server 2000 as the repository. I run the create table scripts, copy all the jar files to C:\Program Files\Apache Software Foundation\Tomcat 6.0\webapps\Idm\WEB-INF\lib. But I still got the following error message:
    com.waveset.util.ConfigurationError: Cannot find columns for table 'object' ==>com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'object'
    Does anyone have any idea of what may cause this problem?
    THANKS!

    I found the solution to this issue.. is that the Database user ID must be set to the schema .. this is the statment that probably did not work:
    CREATE USER <username> FOR LOGIN <login name> with DEFAULT_SCHEMA = <database name>
    In sql 2005 expand the database... open security .. find the user.. right click and select properties.. in the default schema box.. select the SunSync database .. in the schemas owned by this user select the sunsync schema database..
    good luck

  • Please help-Trying to compress to Mpeg-2 for Convention, also resizing issues

    Hello,
    I just recently finished making an AMV in Adobe Premiere 5.5, and I am having trouble trying to figure out how to compress it into an Mpeg-2 source for a competition/convention.
    I also have these massive black borders on the side of my video that I know is probably due to improper resizing on my part, and although I have tried to remedy this with a new avisynth script of the exported uncompressed AVI (before compressing to MPEG-2), whenever I try to run the avisynth script in either VirtualDubMod or TMPGEnc (the converting program recommended by: http://www.animemusicvideos.org/guides/mpegforcons/) it crashes, although the original video does work.
    This is the avisynth script I have created for the post-video:
    FFVideoSource("C:\Users\Freeman\Desktop\Fight the Power.avi")
    FFCopyrightInfringement("C:\Users\Freeman\Desktop\Fight the Power.avi")
    AssumeFPS("23.976")
    SSRC(48000)
    LanczosResize(720,352)
    AddBorders(0,64,0,64)
    per the recommendations from the guide listed below
    I do not know if the resizing I have set up in the new avisynth script will fix my resizing issues, and I would like to improve that as much as possible, so if someone could clarify for me, that would be greatly appreciated.
    You may also notice some audio issues throughout the video, however on further playback this never appears to happen in the same place. I believe this is caused by poor audio quality, and I have a friend of mine working on setting up a lossless source that I will try to recompress with the video before friday, however if someone else might know what is causing this, any advice would be greatly appreciated.
    Here is the current MPEG-2 I have, however for obvious reasons, I do not consider it acceptable as of yet:
    http://www.megaupload.com/?d=IIKYWRXF
    The original export from Premiere is Microsoft AVI Uncompressed, and then attempted to convert to MPEG-2 (I tried multiple settings, they all have the same sizing issues), and as I said before, no matter what I try to do with the avisynth script, it crashes.
    I have even tried taking out every line from the new avisynth script except for the first two detailing the location of the video and audio, however this does nothing, it still crashes.
    I had to convert all my original source avisynth scripts to AVI files (that are massive, as I am editing from 52 episodes of Fullmetal Alchemist: Brotherhood), and so editing the original scripts is impossible at this point, because to my knowledge, that would mean I would have to reconvert them all to AVI, which took over 16 hours, and then that would probably make me have to re-edit this entire video (which if you look at it, based on length and how much work I've put into it: is impossible, especially given the time constraints).
    So anything that I can do to fix this will have to be done to the export from Premiere, unless there is a way to work with the AVI's that I made from the avisynth scripts.
    The source is primarily 16:9 DVD (Fullmetal Alchemist) and very few parts from a 4:3 DVD (Naruto). (You can recognize these parts in the video, it is whenever someone is rowing in a boat during the lyrics "Row Row")
    The avisynth script for all the fullmetal alchemist DVD's is as follows:
    mpeg2source("F:\DVD RIPS\Music Video Rips\Brotherhood\Disc 1 (1-7)\MainMovie\FMA_BROTHERHOOD_P1_D1\FMAB 1-7.d2v", cpu=4)
    ConvertToYV12()
    Spline36Resize(848,480)
    #TTempSmooth()
    FastLineDarkenMod()
    LSFmod(strength=120)
    LUTDeRainbow()
    And the avisynth script for the one Naruto DVD is as follows:
    mpeg2source("F:\DVD RIPS\Music Video Rips\Random\Row Row\MainMovie\ROW ROW\VTS_01_1.d2v")
    TFM()
    TDecimate()
    Spline36Resize(848,636)
    Crop(0,78, 0,-78)
    These recommendations came from what I could figure out from:
    http://www.animemusicvideos.org/guides/avtech31/
    If anyone is curious, the song is "Libera me from Hell", and it is 44100 from what I could tell when I ran it in WINAMP (I converted it from mp3 to wav through WINAMP, if there is a better way that I am unaware of, please let me know).
    I know this is extremely long, and thank you anyone who has taken their time to look through it, it is greatly appreciated.
    The deadline for this is friday (5/20/11), so I need help with this ASAP and thanks,
    Dexter

    Dexter,
    Those "black borders," if they are visible in the Program Monitor, are most likely due to a mis-match between the Source Files and the Sequence Preset.
    If they are only showing up upon Export, then there is likely a mis-match between your Sequence and your Export, and could be either with the Aspect Ratio, or if using non-square pixels, the PAR (Pixel Aspect Ratio).
    I'll defer any commens on AVISynth to the experts here.
    Good luck,
    Hunt

  • How to query XML file RDL SSRS Report to find column titles?

    I have list of SSRS reports  theirRDL file. How can we query the file to find like text book name as below(  <Textbox Name="bippie_passed_qa_photostamps_orders_amount">). Catlog t able in report server does not provide column title
    but i am trying to find column title through RDL file. How can we query in SQL server 2012 version too? I am new in XML please help is appreciated.
      </Textbox>
                      </CellContents>
                    </TablixCell>
                    <TablixCell>
                      <CellContents>
                        <Textbox Name="bippie_passed_qa_photostamps_orders_amount">
                          <CanGrow>true</CanGrow>
                          <KeepTogether>true</KeepTogether>
                          <Paragraphs>
                            <Paragraph>
                              <TextRuns>
                                <TextRun>
                                  <Value>=Fields!bippie_passed_qa_photostamps_orders_amount.Value</Value>
                                  <Style>
                                    <FontSize>8pt</FontSize>
                                    <Format>'$'#,0.00;('$'#,0.00);''</Format>
                                  </Style>
                                </TextRun>
                              </TextRuns>
                              <Style>
                                <TextAlign>Right</TextAlign>

    You will first need to get your report XML from the dbo.Catalog table but something like this should work:
    -- !!TODO get your report XML from the dbo.Catalog table
    DECLARE @ssrsXML TABLE ( yourXML XML )
    INSERT INTO @ssrsXML
    SELECT '<TablixCell>
    <CellContents>
    <Textbox Name="bippie_passed_qa_photostamps_orders_amount">
    <CanGrow>true</CanGrow>
    <KeepTogether>true</KeepTogether>
    <Paragraphs>
    <Paragraph>
    <TextRuns>
    <TextRun>
    <Value>=Fields!bippie_passed_qa_photostamps_orders_amount.Value</Value>
    <Style>
    <FontSize>8pt</FontSize>
    <Format>''$''#,0.00;(''$''#,0.00);''''</Format>
    </Style>
    </TextRun>
    </TextRuns>
    <Style>
    <TextAlign>Right</TextAlign>
    </Style>
    </Paragraph>
    </Paragraphs>
    </Textbox>
    </CellContents>
    </TablixCell>'
    SELECT t.*, c.c.value('@Name', 'VARCHAR(100)' ) nameProperty
    FROM @ssrsXML t
    CROSS APPLY yourXML.nodes('//TablixCell/CellContents/Textbox' ) c(c)

  • Sort files in Finder Column View?

    Like to sort files by date in column view, is this possible? I know you can do it in List view, but can't seem to do this in column view. It would have to be folder specific, as the upper level (which are folders of folders) should be alphabetical, then the folder with files I'd like to sort by date created. Now, all are presented in alphabetical order, and then I have to scroll down to get to them.
    Thanks!

    Nope, can't be done in Finder column view - alphabetical is the only option.
    You can submit a feature request here:
    http://www.apple.com/macosx/feedback/

  • 10.4 style draggable timeline audio preview in Finder/column view?

    For the love of Steve please tell me this vital workflow feature/tool has been re-instated in SL. For folks who work with hundreds of audio files the removal in Leopard of the ability to scroll through audio files in a Finder column view window was a real kick in the teeth. In Leopard the only way to access a scrollable preview of an audio file is to open QuickView, effectively disabling ANY OTHER FINDER ACTION during the preview. Sorry to shout here but this is just...a dreadful step backwards. Not only functionally but also an annoying percentage of files (that should and do play in QT etc) will not play in QuickView and fast-ish previewing through multiple files will often crash QuickView.
    Please let it be fixed.

    I fedback btw, thanks for that.
    Overall Leopard is a fine beast. Basically all I would like is
    a/ scrolling and not only play in window columns
    b/ fix quickview so it plays all the files it should and
    c/ also doesn't crash
    If anyone else feels this way please let Apple know at OSX Feedback
    http://www.apple.com/feedback/macosx.html

  • Oracle APEX 4.0  -  Interactive Report - Table Column Filter Issue

    Environment: Oracle APEX 4.0  -  Interactive Report - Table Column header Filter Issue
    We have developed an interactive report using Oracle APEX 4.0, which contains a record count of around 3,000 Rows. All the rows values are unique in nature. When we try to filter the same with the help of column header filter option available in the interactive report,We get only 1000 records.
    Could some one help us, why this behaviour under APEX Table Column Header Filter as if it does not display beyond 1000 distinct values.
    Is there a way or workaround on how to get all the records in the column header filter?
    Thanks in advance.
    Krish

    Hi
    Thanks for the advice and this issue has been moved to the below URL
    Oracle APEX 4.0 - Interactive Report - Table Column Filter Issue Posted: No
    Krish

  • BPM Workspace - Persistent column resizing & locking down Priority field

    Hello All,
    BPM version 11.1.1.7
    1) In the BPM workspace, a user can resize the visible columns in the tasks list in the Inbox views or other views. However, as soon as the user navigates out and returns to the view , the layout gets resset. All the column resizing is lost. This happens within the same session. Is this expected behaviour? Is there any way to alter this?
    Usually in ADF applications, hooking the application to MDS and enabling user customizations persists the column resizing across sessions. I am wondering why (if) this hasn't been done for the workspace.
    2) The priority field is editable by any user. Is there a way to lock this down based on roles? i.e. only certain roles may edit the priority.
    TIA,
    Bijesh

    Hello All,
    BPM version 11.1.1.7
    1) In the BPM workspace, a user can resize the visible columns in the tasks list in the Inbox views or other views. However, as soon as the user navigates out and returns to the view , the layout gets resset. All the column resizing is lost. This happens within the same session. Is this expected behaviour? Is there any way to alter this?
    Usually in ADF applications, hooking the application to MDS and enabling user customizations persists the column resizing across sessions. I am wondering why (if) this hasn't been done for the workspace.
    2) The priority field is editable by any user. Is there a way to lock this down based on roles? i.e. only certain roles may edit the priority.
    TIA,
    Bijesh

  • Quicktime file info missing in Finder column view???

    In the Finder column view my PowerMac G4 running OS X 10.3.9 shows all QuickTime audio and video file info along with the playable thumbnail video or music bar, including duration/running time and (for movies) dimension/aspect ratio in pixels.
    However, on my much newer iBook G4 from 2 years ago running OS X 10.4.10, those two helpful stats are missing. From what I've been told this helpful file date and aspect ratio data is indeed possible with 10.4 Tiger as it is in Panther but I can't see how to show them via either View preferences, QuickTime prefs, Apple's document files or even these message boards. If anyone could please help me I'd really appreciate it, thanks!!!

    Oh, sorry.
    No, I am running Quicktime 7.2 on both computers. I always install the latest updates when Software Update informs me of one and Quicktime doesn't use different versions for Panther & Tiger as far as I know.
    This has been this way for a long time and the only difference at any time in the past has been 10.3.x vs 10.4.x. I sort of accepted it was something not available in Tiger's Finder column view (since I don't remember doing anything specific in Panther to show that extra info) but then after someone pointed out to me that that should be something one can adjust (and after using common sense) I realized Tiger wouldn't disable or take away info provided in the earlier versions, in a sense downgrading something users may rely on.
    I don't think I asked: are you (or anyone reading this) showing the duration and dimensions of Quicktime audio and movie files in Finder column view under Tiger? ...or under Panther? Again, I'm referring to those that can be played directly in the preview in column view. Thanks.

  • IDM with SQL server Error: Cannot find columns for the table...

    Hi all,
    I am Configuring IDM with SQL Server repository and ran into this error.
    'Cannot find columns for the table 'object'
    .....jdbc...[SQL Server]Invalid object name 'object'
    Can anybody please help me!!
    G

    Yes, permissions are very important. I ran into a similar problem because I didn't have the correct permissions. Make sure the user has the following permissions:
    CREATE ANY TABLE
    ALTER ANY TABLE
    DROP ANY TABLE
    CREATE ANY PROCEDURE
    EXECUTE ANY PROCEDURE
    DROP ANY PROCEDURE
    Also, make sure there is enough space in the default tablespace of that user.
    HTH
    ~Suvesh

Maybe you are looking for