Finding out the Batch which is present during creation of delivery

Dear All,
I need to keep track of changes in batch during delivery. I can find out the change using change documents ( tables CDHDR and CDPOS ). The problem is it keeps track of batches only after the document is saved . If during creation the batch is changed , we are not able to see the initial batch , all the other changes can be tracked using change documents. How can we find out the batches during creation of delivery ( Is there any table which stores the batch no during delivery.
Regards
D. Mallick

This does not looks possible...Changes can only be tracked once they are saved.

Similar Messages

How to find out the batches released from ASCP

hello gurus,
Please let me know how to find out the batches which is released from the ASCP in the OLTP OPM instance, like for the Discrete in the WIP Order in the others tabe we can see that there will be a message like " Job mass loadded on......". So is there any way that we can findout whether the batch is released from the ASCP or is it manually created.
Thanx & Regards

Hi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman.

How to find out the columns which has 16 digit credit card number

Hi All,
I have a requirement where in i need to find out the columns which has 16 digit credit number in it and create a report with owner, table name and column name.
The issue is that the credit card number can be entered in any columns of any table of any schema. For example the credit card number can be entered in any description field(eg: The number is 4001412134642881), in that case i need to filter only the numbers and do the LUHN check to validate the credit card number.
Please provide me a suggestion on how to scanl the values of all the columns to know the column which has credit card number.
Regards,
Raj.

Tell me this - how the hell do you have a database with credit card number data and NOT know which columns of which tables contain credit card numbers? (and how on earth is this data NOT encrypted!?)
How is what you want to do, NOT a fishing expedition to hack a database that may or may not be storing credit card details?
And do you honestly think that we should simply trust that once you have extracted these numbers, performed a Luhn algorithm to verify these as credit card numbers, you are not going to fraudulently use these credit card numbers!?
I have marked your posting as an attempt to hack an Oracle database for fraudulent use of credit card data. I hope that your OTN account is terminated soon and trust that your too much of a coding idiot to actually succeed in this endevour.

How to find out the values which are assigned in authority group

Hi to all
Please tell me where can I find out the values which are assigned in authority object according to roles.
for ex :
         Changed    Customer: Account Authorization                              F_KNA1_BED
          Changed    Customer: Account Authorization                              T-DR50175601
            Activity                       01, 02, 03, 08                                                              ACTVT
            Authorization Group            5100                                                                        BRGRU
F_KNA1_BED is the authority object , assigned to one user.
He can access the authorization group 5100. I want to check that value in my program.
How ?
Where it is stored.
Please help me....
Regards
Anubhav Gupta

Hi Anubhav,
Please use this FM "SUSR_USER_AUTH_FOR_OBJ_GET" and pass the object name in it . You would get the values for that particular object.
Thanks
Nitin Sachdeva

To find out the table which gives me the vendor no. to whom i pay brokerage

Hello Everyone!
      My question is,
           In PO i have two different vendors... one vendor is the one from which we purchase goods and second vendor is the one to whom we pay brokerage. We mention the brokerage amount in 'ZBR0' condition type. Now I want to find out the table which gives me the vendor no. to whom i pay brokerage.
           Please its so urgent.
      Thanks & Regards,
                Pranil Shinde.

Hi,
look in table KONV and you will find your condition and the vendor.
Regards Vassko!

Find out the SQLs which are using a full table scan

Hello all , how can i to find out the queries which are using a full table scan ? Any idea ?

In general, though, why would you want to tune SQL statements that aren't causing problems? Statspack will tell you what the most resource-intensive SQL statements on your system are. A SQL*Net trace of sessions that are performing poorly will indicate which statements are the most resource-intensive for that session. If a statement is incorrectly doing a full-table scan, but it is not causing a problem, why spend time tuning it? If you're not focusing your tuning attention on identifying statements that are causing problems, you'll also miss out on 90% of tuning opportunities which involve rewriting (or eliminating) code to make it more efficient. I can simulate a join on two tables with nested cursor loops, which won't generate a single full table scan, but replacing that code with a real join, while it will cause at least one full table scan, will be orders of magnitude faster.
As an aside, full table scans aren't necessarily a bad thing. If a statement needs to retrieve more than a couple percent of the rows of a table, full table scans are the most efficient way to go.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Need to find out the queries which did not executed in 2014

Hi All,
I need to find out the queries which start from YY and did not executed in 2014, earlier we used to find out by looking into the technical content cube 0TCT_C02 but now its giving dump as number of queries increases. I tried to find out using table RSZCOMPDIR but not able to trace it exactly. Please suggest some alternative solution to find out the queries which did not execute in 2014 so that we can delete it.
Thanks,
Asim.

Hi,
RSDDSTAT_OLAP : This is the table which contains query execution details
CALDAY field in that table gives you query execution date
OBJNAM gives the query name
As you said RSZCOMPDIR gives list of all queries. doing a lookup between these tables will identify the queris which are not executed in particular period.
-Sriram

How can we find out the disk which is used for a mount point

How can we find out the disk which is used for a mount point?
one of our mount point(/u03/oracle/prod) was using high I/O and this was causing slowness in the server.
I can see a disk operation error in errpt at the same time as below. Wanted to check whether the mount point /u03/oracle/prod is using the disk hdisk31
$errpt|more
IDENTIFIER TIMESTAMP T C RESOURCE_NAME DESCRIPTION
DXB78877 1125032114 T H hdisk31 DISK OPERATION ERROR
OS version:AIX 6.1
DB:11.2.0.2

this is the output for cat /etc/filesystem
/u02:
        dev             = /dev/fslv00
        vfs             = jfs2
        log             = /dev/loglv00
        mount           = true
        options         = rw
        account         = false
/u01:
        dev             = /dev/fslv01
        vfs             = jfs2
        log             = /dev/loglv00
        mount           = true
        options         = rw
        account         = false

Finding out the username which created a spesific company code

How can I find out the username which created a spesific company code?
Thanks in advance.

Hi:
In IMG (Tcode SPRO), go to Enterprise structure > Definition > FI > Edit, copy, delete, check Company code; double click on the Co Code, Utilities > Change Logs, check the dates.
Give it a try
Reward if helpful
Aaon

Table to find out the list which shows the last load of infoobjects

Hi All,
I have to find out the Info objects which stop loading in production system, so that we can delete number range buffering for those objects. In table RSDCHABALSLOC I found the info objects which has number range buffering. But total 17000 objects are there its not possible for me to go and check in manage tab for each object manually. I need a table which shows the information like when was the last load happened for the info object. I checked in RSDIOBJ table but time stamp of it not matching with manage data target tab of Infoobject.
Regards,
Asim

Hello Asim,
Have a look at the table RSLDPIO, this should give the last run time of infopackage with other details like related datasource, info object etc. everything.
Just go to SE11 and display data of this table - provide your datasource name to OLTPSOURCE or Info Object Name to VARIANT. Also you can check based on specific infopackage name.
Then sort it in ascending on TIMESTAMP, top most timestamp will be the last run time of that infopackage.
Another helpful table will be RSREQDONE.
Please let me know if this serves the purpose.
Thanks
Amit

How to find out the line which caused the runtime error in a SP?

We have a situation like this.
We are consulting company doing consultancy services on Oracle technologies.
One of our clients have PL/SQL stored package.
We found out by debugging the Oracle Forms front-end application that
error is generated by a procedure inside this package.
Problem is that this procedure has over 6000 lines.
How do we figure out the line which caused the error?
We tried putting messages in between, but not have been successful.
Any help would be greatly appreciate.

How do we figure out the line which caused the error?
We tried putting messages in between, but not have been successful.
What does that mean exactly?
Typically you would instrument the code (especially for multi-step ETL/transform processes) to capture/log key information.
Also, key sections of code would also be in their own BEGIN/EXCEPTION/END block so that you would know what block caused the exception.
step_num NUMBER; -- what step is being executed?
BEGIN
step_num := 1;
. . . do something
step_num := 2;
. . . do something else
EXCEPTION
-- when you get here the 'step_num' variable will have the number of the step that caused the exception. Log it and then handle/reraise it.
END;

How to find out the batch class link of the batch record in the MSC3N

Hi,
I would like to know how to pull out the class type and the characteristic value for a batch which is found in MSC3N.
For example, the following is MSC3N screen showing material (INM000000001724945) and batch (A000001117) tie to batch class “XXXXXXXX”.
Hence, I would like to know:
How to pull out the class type and the characteristic value for a batch record which is found in MSC3N? What are the table? The table show in the F1 key is not a table.
There are two batch classes setup in the system “XXXXXXX” and “YYYYYYY”, my question is why system decides to use the batch class “XXXXXXX”? Where is the system setup to determine this?
Thanks
Tuff

Hi
The table MCH1 keeps the information about Material, Batch and Internal object no.: Batch classification (CUOBJ_BM).
The field CUOBJ_BM in MCHA represent the 'Key of object to be classified' (AUSP-OBJEK). The first 18 characters of AUSP-OBJEK.
In CABN (Characteristic) the field ATINN and ATNAM is important. The link between CABN and AUSP is through ATINN.

How to find out the names which have overlapping times

Hello:
I've a table which contains some names and their calling time period. I need to find out which of those names have overlapping time period.
Name|StartTime|EndTime
A|26/3/2011 12:33:16 PM|26/3/2011 12:40:10 PM
A|26/3/2011 12:41:28 PM|26/3/2011 12:43:19 PM
A|26/3/2011 12:42:28 PM|26/3/2011 12:47:50 PM
B|26/3/2011 10:22:28 PM|26/3/2011 10:50:10 PM
B|26/3/2011 10:49:28 PM|26/3/2011 10:53:50 PM
B|26/3/2011 10:50:28 PM|26/3/2011 10:59:50 PM
B|26/3/2011 10:59:58 PM|26/3/2011 11:10:50 PM
C|26/3/2011 11:05:58 PM|26/3/2011 11:10:50 PM
C|26/3/2011 11:40:58 PM|26/3/2011 11:50:50 PM
I need those names which have multiple calls and one call starts before the end of another call. If anyone have four calls and two of those overlapped (A has two overlapping and B has three overlapping), that name should also come into my list like below:
Name|Overlapping_Count
A|1
B|2
Can anyone help me please?
Thanks/Razin

Thans for pointing out the error in my post. It seems, being rather busy in this period, I'm starting to wear out as I missed the fact the overlaps would be returned twice. :(
I had in mind a more general case where as single row overlaps with more than one other row.
The OP's data contained one to one overlaps only and it seems no generalized approach was needed.
with
the_data as
(select 'A' name,to_date('26/03/2011 12:33:16','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:40:10','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'A' name,to_date('26/03/2011 12:41:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:43:19','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'A' name,to_date('26/03/2011 12:42:20','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:42:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'A' name,to_date('26/03/2011 12:42:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:47:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:22:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 10:50:10','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:49:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 10:53:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:50:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 10:59:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:59:58','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 11:10:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'C' name,to_date('26/03/2011 11:05:58','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 11:10:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'C' name,to_date('26/03/2011 11:40:58','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 11:50:50','dd/mm/yyyy hh24:mi:ss') end_time from dual
select name,count(distinct overlap) overlapping_count
from (select x.name,to_char(greatest(x.start_time,y.start_time),'yyyymmddhh24miss')||'|'||to_char(least(x.end_time,y.end_time),'yyyymmddhh24miss') overlap
          from the_data x,the_data y
         where x.name = y.name
           and greatest(x.start_time,y.start_time) < least(x.end_time,y.end_time)
           and x.start_time != y.start_time
           and x.end_time != y.end_time
group by name
order by name
with
the_data as
(select 'A' name,to_date('26/03/2011 12:33:16','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:40:10','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'A' name,to_date('26/03/2011 12:41:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:43:19','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'A' name,to_date('26/03/2011 12:42:20','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:42:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'A' name,to_date('26/03/2011 12:42:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 12:47:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:22:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 10:50:10','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:49:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 10:53:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:50:28','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 10:59:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'B' name,to_date('26/03/2011 10:59:58','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 11:10:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'C' name,to_date('26/03/2011 11:05:58','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 11:10:50','dd/mm/yyyy hh24:mi:ss') end_time from dual union all
select 'C' name,to_date('26/03/2011 11:40:58','dd/mm/yyyy hh24:mi:ss') start_time,to_date('26/03/2011 11:50:50','dd/mm/yyyy hh24:mi:ss') end_time from dual
t as
(select name,
        case when max(end_time) over(partition by name order by start_time,end_time rows between unbounded preceding and 1 preceding) > start_time
             then 0
             else 1
        end start_of_group
from the_data
select name,
        count(*) overlapping_count
from t
where start_of_group = 0
group by name
order by nameRegards
Etbin

How to find out the Batch job selection screen values

Dear Users,
One of our users has set up a Batch job by manually entering values into the Selection screen of a report instead of picking up a Variant. We would like to know the values entered on selection screen since the job has failed and the user doesn't remember the selection screen values entered.
Can anyone please advise if there is a way we can figure out the selection screen values entered?
Thanks,
Vijay

Hi,
You can debug your failed job by going to 'SM37', type in 'JDBG' in the command line ( no '/' ), put the cursor on the job and press enter - will take you to the job in debug mode.
You can do this only after the job has finished execution. This will simulate the exact background scenario with the same selection screen values as used in the job.
So type in the transaction code 'JDBG' and place your cursor on the job after It has finished. It will take you to a SAP program in debug mode. Step through this program which is about 10 lines, after this your program will be executed in the debug mode.
Check the selection screen values.

To find out the object which called a method

Hi all,
Is there any way to findout the object which called a class method.
The object name is required inside the method.
Thanks in advance,
Sreekanth

Hi Sreekanth,
You can do it by reading the CALL STACK.
At the beginning of your method put the following code:
data:
    begin of stackItem,
      program        type SYREPID,
      include        type SYREPID,
      line           type i,
      eventtype(12) type c,
      event(70)      type c,
      flag_system(1) type c,
    end of stackItem,
    stack like standard table of StackItem.
call 'ABAP_CALLSTACK' id 'DEPTH' field 2 id 'CALLSTACK' field stack.
read table stack into stackitem index 2.
MEssage i002(sy) with stackitem-program.
Here stackitem-program is the calling program.
Cheers,
Aditya

Finding out the Batch which is present during creation of delivery

Similar Messages

Maybe you are looking for