Fingers must linger on the keyboard letters in order for it to work

I had previously made a mistake and disabled my keyboard via the terminal program and long story short I had to connect an external keyboard for a little bit until I restarted my laptop, therefore enabling my keyboard again.
Now, when I was using the external keyboard, it did work but I had to type very slowly as I had to make my fingers linger on every key for it to work. I thought that was because there's something wrong with the keyboard.
And now that I'm back to using my laptop's keyboard, it works the same as the external keyboard. That is, the buttons must be pressed much longer than usual for it to work.
Also, these pop up at the top of my screen when the shift and/or command buttons are pressed.
Is there a way to get it back to normal? This took me 30 minutes to type. I need my keyboard back to normal asap.

System Preferences, Accessibility, Keyboard.

Similar Messages

Do you need to activate the "find my iphone" app on the actual iphone in order for it to work, I have downloaded an iso update earlier in the week.

Unfortunately my phone was stolen from my workplace on thurs & I didnt have the FMI app turned on.....is their any chance I can turn this on via icloud or itunes????

The app is only for locating another iOS device from the one the app is installed upon.
If you didn't setup the iCloud account and turn Find my iPhone on in the settings BEFORE the phone was stolen, then you can't track it now or activate it remotely.

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

I've just found the keyboard shortcut in Garageband for 'copy region' had changed from cmdC to ctrlC. I went to Preferences and clicked Restore Defaults for shortcuts. Now its altC . How can I get it back to the original commands.

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

My Mac notebook does no longer recognise my external keyboard which was connected by a USB cable. I have checked the keyboard on other Mac notebooks and it works fine. Any suggestions?

My Mac notebook does no longer recognise my external keyboard which was connected by a USB cable. I have checked the keyboard on other Mac notebooks and it works fine. Any suggestions?

and in some kind of record, I've read another thread an it's fixed!!
Kids.
Accessability-> zoom-> off
5 days i've been squinting!

I want to make the keyboards numerical keys shortcuts for buttons.

I want to make the keyboards numerical keys shortcuts for buttons, without a modifier key is this possible ? e.g. press '1' on the keyboard button 1 is pressed on the GUI.

The number keys are not valid hot keys for our controls. The easiest workaround would be to use fhe F keys instead (F1 for button 1, etc.) However, if you are set on the number keys you could implement this with a panel callback. You could have a panel callback that monitors all keypress events and then, depending on the key pressed, calls the code that would be called with a button press of the button for that key.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

The keyboard on my macbook air has stopped working. It was fine at lunch time now the up and down arrows move the page and the left and right take me into dashboard and out. The keys beep if pressed the only way to type is to use bluetooth keyboard.

The keyboard on my macbook air has stopped working. It was fine at lunch time now the up and down arrows move the page and the left and right take me into dashboard and out. The keys beep if pressed the only way to type is to use bluetooth keyboard.please help

"If none of the keys work, your computer may be showing a low battery alert that you can’t see.
Connect your computer to an electric outlet or an external keyboard to see the alert".
http://support.apple.com/kb/PH10680
http://support.apple.com/kb/ts1381
Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

I have a Pro that's about five years old. It doesn't have a hash tag on the keyboard which is useless for Twitter. How do I set up a shortcut. Help is useless

I have a Pro that's about five years old. It doesn't have a hash tag on the keyboard which is useless for Twitter. How do I set up a shortcut. Help is useless
Hold on, found it - Alt 3 - thanks to old messages.

hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful. I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates. However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
Any ideas?

HT204406 I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out.

I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out. Help!!!

Where are iTunes files located?
No, I do not mean just the music. Copying just the media/music files or the media folder creates problems.

To Get the list of sales orders for a Business partner in CRM.

Hi all
Is there any Function module or BAPI to get the Sales orders for a Business partner in CRM. I know there is a BAPI to get the list of sales orders for a customer in ECC, but I donu2019t know how to get the list of sales orders for a Business Partner in CRM.
Can anybody tell me if there is an inbuilt function module or BAPI available?
If not how can I pick the sales orders of a business partner in CRM? Between which tables should I apply a join and write SELECT statement to get list of sales orders for a business partner in CRM.

Hi Jessica,
Try CRM function module CRM_BUPA_READ_ORDER_OBJECTS.
You'll get a table with the documents associated to that partner, where you can work on.
Kind regards.

I ordered Illustrator for another user. I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

I ordered Illustrator via creative cloud for another user. I received an invitation that was accepted and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

Cloud as a Gift https://forums.adobe.com/thread/1665610

Transaction to see the Open stock transfer order for the plant

HI ,
i need to develop one report in that client to make the report for the all open stock transfer order & the cost of the open stock transfer order for the plant .
I need how to cretae the stock transfer order for the material , whci material master is required for this process.
please give me step by step details for this .
regards
satish
Edited by: satish kapartiwar on Jul 16, 2009 9:33 AM

Hi Satish,
You can see open stock transfer quantity in MB5T and stock value in MB5L. If you want to make stock transfer, there is two types intra company transfer(with in same company code) and inter company transfer (different company codes).
Steps for Intra company stock transfer:
This is only within the comp.code(w/o SD)
(w/o SD) 351101 MvT. and (with SD) 641101
1. Mat.(1434)should be maintained in both the plants.(@1000&1100).
2. Should have enough stock in supplying plant(1000).
3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
4. Make it receiving plant as a customer in customization.
Create customer (xd01) & and define the shipping data for plants in both the plants.
Path: spro u2013 img u2013 material mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data
(1 by1 )
In Receiving plant (1100)
Customer num. 123345 (for ex.)
Sales org. yyy
Dist. Channel yy
Sales div. y
In Supplying plant (1000)
Customer num. -
(don't fill)
Sales org. yyy
Dist. Channel yy
Sales div. y
5. Assign doc. Type is "NL" for intra company STO. If STO is inter company, Assign doc. Type is "NLCC".
Position doc type is "UB"
Enter supplying plant(1000) & doc type (NL)&checking rule (ex:01)
6.Assign doc. Type is "UB" to u'r plants.(PO)
Go for new entries
Enter supplying plant(1000) & Receiving plant (1100)&doc type (UB).
7. Create a PO, choose the doc type is 'UB' & item cat.'U', Enter supplying plant as a vendor in PO of the receiving plant(1100).
8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
9. Sales people they will provide "out bound delivery num".
10. Do the GR. In GR the second tab 05 outbound delivery instead of PO mov.type 101.
11. See the stock overview in the receiving & supplying plants.
Steps for Inter company Transfer:
1) Create one Customer Master in XD01 with respect to Supplying Plant Sales Area and assign this Customer no with Receiving Plant in OLME->PO-> set up STO->Define shipping data for plant and for the supplying Plant assign the above sales area.( Make sure, In Customer Master, sales Area Tab: you are maintaining shipping condition)
2) For Receiving Plant Pur. Org and Co.Code Combination create Vendor master in XK01 and in this vendor master assign the Supplying plant in Pur.Org.Data screen->Extras--> Add.Pur.data
3) OLME->PO-> Set up STO------>For your supplying plant assign document type NB, Delivery type NLCC and Checking Rule RP
4)then For your supplying Plant and receiving Plant assign Document type NB
5)Make sure you are maintaining Sales View for the material at supplying Plant and in Sales /Gen plant Data view maintain Availability check, Loading group and Transportation group.
6) In SPRo-->Logistics execution> Shipping->Basic shipping functions->Shipping point Determination>assign shipping points-> For your Loading group, Shipping Condition and Supplying plant combination, Assign shipping point
these are the configuration settings you have to do in background.
Then Create STO from Receiving Plant in ME21N with document type NB.
Based on that STO, Create Delivery in VL10B from supplying Plant
Do PGI in VL02N from Supplying plant
Do GR in MIGO at Receiving Plant keeping Outbound delivery as a ref. document.
Now your STO bet. two plants belongs to diff. Co.Codes will be completed.
Regards,
Prasath

How can I access my computer when the keyboard letters don't respond and I need to input my password?

My computer is password protected, but for some reason, the letters in the keyboard are not responding. I press the "Caps lock" button and the "num lock" button and they seem to operate fine and the mouse is also working properly, but it seems like the letters are locked and won't input.
Please help

Hit the num lock button again. Num lock forces only the numeric keypad underlying keys to work as a numeric keypad, and the rest of the keyboard won't work. Unfortunately Apple stopped including the numeric keypad hidden keyboard key labels on its keyboards. They used to include them. They are known as mouse keys: http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_moskys.html

Keyboard letters mixed up, enter key not working - early '11 MacBook Pro

I have an early 2011 MacBook Pro. The keyboard randomly stopped functioning correctly, some keys didn't work at all and others would type in different symbols that I've never seen before. I reset the language it seems to have fixed most of the problems (5 keys weren't working but now they all are). The Enter key inserts a hyphen instead of its normal function and certain keys will still type in random letters. If I press shift and the ENTER key it now puts an underscore instead of a hyphen. The question mark slash button also puts a hyphen or an underscore, as does the original hyphen button. The plus sign and equal sign button now puts a square bracket, etc. You get the idea. I have already reset the PRAM, but the problem still persists. Approximately how much would somethin© like this cost to ©ix (© replaced the f and ©©©© keys now). f and ©©© keys now.

Try using a usb or wireless keyboard to verify that your built-in keyboard needs repair/replacement.
I don't see how anyone here could give you a price for that, these are user/user help forums. Take it to an Apple service facility.

Is there a way to make the keyboard "go down" (like in messages) while working in Mail?

It's challenging when I want to review an email that I've typed but the keyboard talked up 40-50% of the screen. It's nice in messages how you can drag the keyboard down. Is there a way to do this in mail?

Just I tried it on my phone and looks like you can't.

Fingers must linger on the keyboard letters in order for it to work

Similar Messages

Maybe you are looking for