Firefox not starting after update to 3.6.11 from 3.6.10 on vista platform. XUL error report. Uninstall including removing mozilla items in regedit or system restore does not resolve issue. XUL error still reappears after reinstall ? in English
Problem exists on my HP C0mpaq 6720s , Vista operating system.
System restore, restored to version 3.6.3 instead of 3.6.10 . This did not start either. Previously, I used Revo Uninstaller Pro to remove all Mozilla items, checked regedit and removed all Mozilla folders, then reinstalled 3.6.11 from your website. Mozilla would not start and XUL error stated 1.9.2.10 followed by min 1.9.2.11 and max 1.9.2.11 . This was the same error report that appeared after the automatic update.
So I am at a loss and without Mozilla .
I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....
Similar Messages
-
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
I regularly use 2 windows with multiple tabs each and session restore would work to get them all back, but after this latest update the second window does not restore properly, with the first tab not visible on top(only in drop down menu) and the add a tab button now on the left(instead of right). The add a tab button is not really concerning other than it indicates other problems with the tabs on tab of the 2nd window. Not having the 1st tab visible is frustrating, because I can not move it or as easily navigate. Also, the tabs on top of the 2nd window that are visible no longer have the "x" to close visible unless that tab is selected. I'm assuming this is a problem with the new release/update, since this is the first time I've ever encountered the problem, and I've shut down and restored Firefox a few times to make sure this was a recurring problem and not a one-time deal. Any ideas on how to fix would be welcome(other than perhaps cramming my tabs onto one window or sucking it up XD).
Hi,
You can try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' in the [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen.
If the problem persists, please try a [https://support.mozilla.org/en-US/kb/Managing-profiles?s=profile&r=0&e=sph&as=s new profile]. You can later copy [https://support.mozilla.org/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&e=sph&as=s needed data] from the old profile to this.
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files] -
System Restore does not work (Windows 7)
I believe that my internal wireless network card has died although the laptop is only 8 months old, but that's another issue.
I'm running Windows 7, and I tried to have system restore backup to a few days ago. There have been no changes to the computer in this time other than Windows update. After performing system restore and rebooting, I have a message that system restore was cancelled because there was a file in use. It suggested I disable anti-virus protection. After disabling that, I tried system restore once again. The computer seemed to be doing it right, but after reboot, I got the same message that it could not be performed due to a file in use.
I've turned off everything I can think of, does anybody know why might be causing system restore to stop and how it could be corrected?
ThanksIf you cannot do a System Restore from the Recovery Environment (as Archie suggested), then probably the restore points have become corrupt. That's not uncommon.
To repair that, turn System Restore off and then on again. Unfortunately, that removes all the previous restore points.
Turn System Restore on or off
If you post again, tell us which computer you have.
-Jerry -
I am running Windows 7 upgraded from Vista and I am having issues in the little flag that pops up in the task bar on the right side.
It says that disk errors are detected, when i try to fix it nothing happens. I tried to restore my computer and I keep getting this message that
"Windows has detected file system corruption on (my hd). You must check disk for errors before it can be restored"
I go to run the disk check and when I do not have automatic fix it actually scans, but tells me after a while that I need to click the automatic fix file system.
I do that and it says "Windows can't check disk while in use. Do you want to check for hard disk errors the next time you start your computer?"
I click schedule but nothing happens when computer restarts.
Any help would be appreciated.Ill post you some screen shots can you over here ill try to link them.
I go to restore 1.
http://i25.tinypic.com/2wdxboz.jpg
2. I go next and select a point to restore
http://i28.tinypic.com/1zwhopz.jpg
[IMG]http://i28.tinypic.com/1zwhopz.jpg[/IMG]
3. I get error
http://i26.tinypic.com/29vn95.jpg
[IMG]http://i26.tinypic.com/29vn95.jpg[/IMG]
4. I check for errors and get this
http://i28.tinypic.com/64nl3b.jpg
[IMG]http://i28.tinypic.com/64nl3b.jpg[/IMG]
5. the schedule thing pops up
http://i32.tinypic.com/11m84nk.jpg
[IMG]http://i32.tinypic.com/11m84nk.jpg[/IMG]
MarantzI tried that earlier and it still did not run after restart.
I searched these forums and they had a vista fix I tried to use that since my original windows was vista but that didnt work for me. In that they had the chkdsk r and stuff nothing worked -
IPhoto does not start to update after my iMac was updated to OS X Yosemite.
iPhoto has been "paused" after my iMac was updated to OS X Yosemite. iPhoto does not start to update when I click "UPDATE" in App Store "Updates". The circle on the left top corner just keep circling. Do you know how to fix this problem? I cannot download my photos to iPhoto without updating it.
Thank you LarryHN,
I could not follow what you have explained to me as I struggled to find iPhoto 9.6. Anyway, while I was struggling, I managed to update iPhoto somehow. Finally, I can use iPhoto!
Thank you very much for your quick response.
Tama Chan -
After updating to ISO6, my email sending get extremely slow or dispeard. on the botton line of mail page always indicate "sending # of 9", however I do not know where to check or delete these unsent items. Please help! It has consumed lots of data.
I use @me.com and @hotmail.comHi,
>>A CHAR datatype and VARCHAR2 datatype are stored identically (eg: the word 'WORD' stored in a CHAR(4) and a varchar2(4) consume exactly the same amount of space on disk, both have leading byte counts).
Ok, but on the other hands:
SGMS@ORACLE10> create table x (name char(10), name2 varchar2(10));
Table created.
SGMS@ORACLE10> insert into x values ('hello','hello');
1 row created.
SGMS@ORACLE10> commit;
Commit complete.
SGMS@ORACLE10> select vsize(name),vsize(name2) from x;
VSIZE(NAME) VSIZE(NAME2)
10 5
SGMS@ORACLE10> select dump(name),dump(name2) from x;
DUMP(NAME) DUMP(NAME2)
Typ=96 Len=10: 104,101,108,108,111,32,32,32,32,32 Typ=1 Len=5: 104,101,108,108,111Cheers -
The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
After update to version 4.01 from 3.6.17 all my bookmarks and passwords are gone,how can i get it
after update to version 4.01 from 3.6.17 all my bookmarks and passwords are gone,how can i get it
my bookmarkbox is emty , how can i bring back the bookmarksFirst it would be helpful to get more info. Do you keep your music in the default location inside the iTunes folder? Do you use iTunes to keep it organized? Do you have any type of backup of either the iTunes Library files or your entire Music folder? Before reinstalling anything, check that your actual music files are still there. Go to your_homefolder/Music/iTunes/iTunes Media/Music and I am pretty sure that all your files are still there. iTunes keeps its library file on the root level of the iTunes folder. It is either corrupted or you somehow created a new one which subsequently is empty. Hold down the option while you click on iTunes, then choose "existing library" and browse to your iTunes folder and select the iTunes Library file and see what happens. Report back if your iTunes Library file is corrupt.
-
After watch a video in "full screen mode" and the video shrinks back into the eBook view, HALF of the TOP Title Bar DISAPPEARS, But it does not happen with ios 6.1
The Mac has never needed "Full Screen". It has done multiple screen Extended Desktop since 1987.
Full screen is an iPhone feature, carried into this verion with the mult-touch gestures and other so-called "unifying" features. -
got new credit card , updated card detail but adobe said i need to renew subscription ... but my subscription only expires end of nert month .. Ps does not want to open .
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
Transports while importing DS error "Source system QAS does not exit "
Hi Experts,
For a specific reason we are importing a DS from quality to development.While importing DS in Development side we are getting an error " Source system QAS does not exist".Error message as below:
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
Source system QAS does not exist
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_ROUT_AFTER_IMPORT for object type(s) ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request CXCK900023 completed
Start of subsequent processing ... 20090306024549
End of subsequent processing... 20090306024550
Execute reports for change/transport request: CXCK900023
Reports for change/transport request CXCK900023 have been executed
Start of................ 20090306024550
End of.................. 20090306024550
Execution of programs after import (XPRA)
End date and time : 20090306024550
Ended with return code: ===> 8 <===
Our system sap bi is not new system, we are using from long time.Transports are working while moving dev to quality and quality to prod.
Can any body suggest on this.
Regards
VinodHi vinod kumar,
i hope you need to map source system From QAS to DEV system,
genereally from DEV to QAS configuration will be there, but here request is moving from QAS to DEV so i think this should be configured.
RSA1-> Tools -> conversion of logical system names -> maintain original system and target system name for both BI and ECC systems.
Regards
Daya Sagar -
When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!
If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number?
Maybe you are looking for
-
Assignment of filter to planning function in integrated planning
Dear experts I am a bit new in Integrated planning and have a following conceptual question regarding filter object in IP In IP it seems that filter is a substitute object for planning package in BSP. I however do not see any possibility to assign fi
-
How to get the 'mime-type' of a Resource accessed via WebDAV
Hello, When a document is uploaded into a folder which is managed by a WebDAV RepositoryManager we don't see a Property 'mime-type' or something like that. Our code: <i>IPropertyMap lijstProp = tempResource.getProperties();</i> In the list there is n
-
Hi Expert, I have a problem whith Withholding tax when I make a Invoice from Real Estate. On the detail of the conditions tab of the RE Contract, I add a Withholding tax on Terms Tab, and then, when I Post the contract only calculate Withholding t
-
Passing a CLOB as input parameter
Can someone help me pass a CLOB to a stored procedure in oracle: begin -- Call the procedure A(p_ccn => :p_ccn, p_xml => :p_xml, p_out_err_status => :p_out_err_status, p_out_err_msg => :p_out_err_msg); end; Here p_xml is a CLOB. If I have to run proc
-
Don't have an option SLEEP on close lid in powercfg.cpl,
Hi, I have T61 8896-A67 , and I can't find make it sleep when lid closed, no such option in drop down menu, just have DO NOTHING. I have Power Managmt Driver v 1.62, what is ths problem about, I also can't find where is this switch for close lid? t