First Complete Time Machine Restore

I've used TM to restore a few documents that I've accidentally erased but today's the first time I've used it for recovering my hard drive. My boot drive threw up a SMART failure warning earlier this week so I ordered a replacement and installed it this AM. Prior to installing, I cloned it with Carbon Copy Cloner to an external drive but I really wanted to see TM in action.
After formatting the drive, installing Leopard from the DVD, and performing the usual registration ritual, I was immediately offered the chance to restore the computer with TM. (This was at the point where we are also offered the chance to use the Migration Utility.) I chose to restore with TM and then had the option to chose what I wanted to restore - internet settings, the Users folder, and applications were my options. I chose all of them and an hour later my computer restarted and booted into Leopard.
The good news is all my configurations were restored, as were my User accounts and folders. The bad news is my applications were not completely restored. As I looked through the Application Folder in Time Machine I could see the applications that didn't get restored (at various restore points) so I chose a restore point and TM is now copying Adobe CS, iWork, Filemaker Pro, and a folder of utilities. I'll hold off on completing this post until that restore has completed.
Okay, so CS3 seens to have restored properly, that's a relief. Still, it looks like I have several more applications to manually restore. This isn't quite what I had in mind. I wonder if this is a side affect of a drive that was perhaps already having troubles (though I saw no evidence until the SMART error when I ran Disk Utilities before cloning it, no errors were discovered) or if it is par for the course.

*Personally, I never expected Time Machine to restore an application.*
My computer is completely restored and I didn't have to install a single application nor enter a single serial number. Every program I've tested, including the entire Adobe suite, Office, and Missing Sync works. The problem I described has nothing to do with programs. It is that Time Machine, at least in this instance, didn't restore my entire drive automatically. I had to select different archive sets to get all the applications. Interestingly, that wasn't true of my documents.

Similar Messages

Complete time machine restore from earlier date to latest date

Hey everyone,
my 9-month old harddrive died on me 2 weeks ago. I'm living in Argentina at the moment, roughly half a world away from my installation disk. My backup drive has been sent over from Germany now and I managed to get a new (overpriced) harddrive over here.
After I couldn't get a hold of the MAC OS X CD quick enough, I got an Apple Approved Technician to install Snow Leopard / do a complete restore of my backup through Time Machine.
I've just come home and sadly realized though, that they did the complete restore of the earliest backup from March 2012 and not the latest from September 2012.
When I open time machine, it shows the latest back-up date as September 28th on the right hand side but all dates later than March 1st are greyed out and i can't click on them. Though all those files from the latest back-up are still visible in Finder on the external backup harddrive .
I've searched for ages now, trying to find someone that has the same problem, but can't find anyone.
Please can somebody tell me what I need to do to be able to do a complete back-up restore to the latest date aka September 28th?
(I still don't have an actual MAC OS X Disk as they did everything in their office)
Anyone that's ever lived in Argentina can probably imagine my frustration and that I'm close to a heartattack - so any help would be greatly appreciated!
Cheers, Falko

Welcome to Apple Discussions:
AFAIK, you can only restore a TM backup onto an identical (or nearly so) computer. I don't think the Intel backup will work at all on a PPC. The drive partitions schemes are incompatible - GUID vs APM and none of the drivers or other hardware-related software components will work, not to mention many of the Intel-only apps.
The best you can do in install Leopard on the PPC and see if you can migrate from the TM backup.

Want to restore my computer, but only with a few files; not a complete Time Machine restore

My computer's messing up and I decided I might as well start fresh, but I want some files and folders back obviously.
I take it, I simply need to:
Turn it off
Turn it on and put the install disc into it, meanwhile holding the C key
Install Snow Leopard
Once it's installed, select the external drive I'm using for backups
Open Time Machine, right click on files/folders I want to restore.
What will and won't work? Because, it seems to me you can't redownload movies from iTunes. What about the settings? Is there some sort of .yml or something somewhere that holds them?
And, something I'm dreading, how will I get my programs back? Will I need to reenter the product key? I have Adobe Production Premium CS5.5, should I deactivate it then reenter the product key? What about the plugins for After Effects? Also I have MPEG Streamclip, and when I bought it, I don't remember having to enter any product key.
And my copy of Office for Mac 2011, I bought the 2008 box and it came with instructions of how you're eligible to get 2011 once it's available, when I went to install Office for Mac on my MBA, the offer was no longer available.
Thanks in advance.

I understand the basics, I just want to know how to restore certain items essentially on a new computer without restoring everything.

Time machine Restore Issue

Hi, I recently started having some major operating system problems after installing the latest security update for OS 10.5.8 on my PowerMac G5. Im fairly certain that the download file was corrupted in some way because my substandard-expensive-archaic system that gives itself the undeserved title of "Internet Service" often loses bits of downloads and is generally very unreliable. Needless to say I decided to do a complete time machine restore. Thinking it was going to be as easy as it has been when Ive done it on other macs, I decided this was better than trying to fix the system issues (Which involved a repeated "There is no point for line" error about 45,000 times a day in the console logs, about which i could find no information). Anyway, I booted from my OS X dic and loaded time machine, selected my backup, and selected my destination drive and away we go! After about 2 and a half hours (which is to be expected with over 1,000,000 files totaling over 900GB of data) the restore finished....or so I thought. The screen said Restore Process Complete and the Progress bar cleared out but the restart button at the bottom of the window never showed up like it should. All I got was the spinning beach ball. So, thinking that the data had copied over and it should all be there anyway, I decided to force restart after waiting for about 2 hours for any progress. Upon restart I found that the newly restored drive was not bootable. Using Disk Utility on my OS X DVD I found that all the files were copied. So I tried it again, erasing the drive completely and then restoring from a backup with a slightly different time, and I got the same results. Any help would be awesome and ill be checking back to answer any questions about what info I may not have covered. Thanks!
PS: I looked around for a similar posting but all the ones I found were involving hangs during the restore process (IE: 64%) and I didn't see anything quite like this, so if this issue has already been discussed then sorry for the double post.

It sounds like something in your installation of OSX was corrupted, and got backed-up. So when you restore, you're restoring the problem.
Your best bet is probably to do an +Erase and Install+ of Leopard, then use +Setup Assistant+ when your Mac restarts to transfer all your users, data, apps, and settings from the backups. See #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Then download and install the "combo" update, to get back to 10.5.8. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

Update OS or time machine restore first?

I lost my HD and had a new one installed.
Should I first update my OS to Snow Leopard or do the Time Machine restore first?

Does this help?

Time machine restore resets after 1% completed

I am at the multi-language welcome screen, I get to the appropriate Time Machine restore backup and it begins. After 1.2% completed, it just takes me back to the multi-language welcome screen. No restart, no chimes, like nothing happened. I'm restoring from a 2-week old backup via USB on my 4 month old 15' MacBook Pro.
Please! I need this thing for work tomorrow and am desperate, the restore will take 9 hours and I'm getting frustrated.

Check that the data cable to the drive is firmly inserted at both ends. If the drive is bus-powered but has an AC adapter, connect the adapter. If it's connected through a hub, connect it directly to a built-in port. Try another cable. Failing all that, continue as below.
Starting from a fresh installation of OS X, set up a new administrator account and log in. You should now be able to enter Time Machine and restore your user data from a snapshot.* I suggest you do this in two stages. Quit all applications except the Finder before you begin.
Restore all the visible items at the top level of your home folder.
Hold down the option key and select Go ▹ Library from the Finder menu bar. Enter Time Machine and restore all items in the Library folder. Log out and log back in as soon as the restore is complete.
Any other invisible folders or files at the top level of your home folder that you want to preserve will have to be restored separately. For most users, that isn't necessary.
You'll have to reinstall all third-party applications from scratch, or restore them from another kind of backup, if you have one.
You'll have another problem if this is a new computer, or if you erased the startup volume: Time Machine won't continue your previous snapshot series, but will instead try to begin a new one, starting with a full copy of all files. There might not be enough space on your backup volumes for that. There are different ways of dealing with that situation, depending on your needs. The easiest way is to set your backup drives aside, if possible, until you're sure you'll no longer need the data on them, then erase them and start over. Meanwhile start a new backup on one or more empty storage devices. If that solution isn't workable for you, ask for instructions.
*If you don't see any snapshots in Time Machine, exit the time-travel view and then hold down the option key while selecting
Browse Other Backup Disks...
from the Time Machine menu, which has an icon that looks like a clock running backwards. Select the backups of your computer by its previous name. If you don't have the Time Machine menu, open the Time Machine preference pane in System Preferences and check the box marked
Show Time Machine in menu bar

Time machine restore not complete

I had to get a new hard drive for my iMac. Time Machine restored all the files and programs, but not the settings, so my desktop, my dock, all the pointers in software like Apature, etc are wrong. Why didnèt all this come back with the restoreÉ Or how do I get it back without manually setting everything up again.
Thanks
Jeff

There is a bug for some users.. but not in Snow Leopard if you are using that as per your profile. It is Mountain Lion that is the issue.
See http://pondini.org/TM/D10.html
Did you Migrate or did you do system restore?
They are different. Settings will mostly not migrate.
See Q14 and start over to do a full system restore.
More info on migration here.
http://pondini.org/TM/14.html
http://pondini.org/OSX/MigrationProblems.html
Go back to the main directory of Pondini and read through his information..
Q14-17 here on how to restore from Time Machine is most important.
http://pondini.org/TM/FAQ.html

Update from 10.7.2 to 10.7.3 blown - Time Machine Restore blown

Hello,
summary of events:
Update form 10.7.02 to 10.7.3 went wrong
After Time Machine Restore no more Recovery Partion
Lost about what to do
On Saturday, I startet to update 10.7.2 to 10.7.3 on my MB Pro 15" (2007) Apples Software Update showed the combo update, and so I started download and installation. Just before that, I had run Time Machine on an external USB drive, so I was relaxed.
After about 2 hours, the update was still running with no progress. After another hour, I forced a restart. Not very suprisingly, after the login, the wheel beneath the Apple logo kept on running.
So I restarted from the Recovery Partition, selected my Time Machine-Backup from the external USB drive, selected my internal HD as target and clicked on "go".
While the progress bar showed progress, I waited. Then it seemed to be complete and the MBP restarted. Now I got a folder with a question mark. My heart rate did not yet accelerate, since I had a back up, right?
So I restarted again trying to boot from Recovery Partition - BUT, there was no longer a Recovery Partition. Or at least, nothing I could boot from.
What options do I have? I could get my hands on a DVD that contains an Lion installation from the app store, but that is not the most recent version, as far as I can tell. If I would go that way:
Does the version of the Lion-app matter?
Will it create a Recovery Partition?
If not, how else could I restore a complete Time-Machine backup?
Any help and suggestions are very welcome :-)
Regards
Jimbo
Naturally, I a am mad as **** at Apple. First, that they abandoned physical media for Mac OS distribution, and secondly that some not so bright lad thought it not necessary to secure the availability of the Recovery Partition under any circumstances short of phyical damage. This really *****, guys!

Ok... I'm not sure if the following suggestions will work with Filevault 2 enabled. I guess you can try after you create a backup for safety.
You can recreate the Recovery HD two ways. One is to reinstall Lion using a bootable USB thumb drive of the Recovery HD created with the Lion Recovery Disk Assistant. Or from a bootable USB thumb drive with the Lion installer restored to it.
A second way, which I have used many times, is to follow the instuctions at this site using Terminal commands. Step 3 is what you want to follow. The instructions use the RecoveryHDUpdate.dmg file downloaded from Apple to recreate the Recovery HD. It works great!

Is it possible to boot or Time Machine restore from an external Thunderbolt disk drive?

(There are several questions - search for "?".)
I purchased a Seagate Backup Plus for Mac Desktop Drive 3 TByte with default USB 3.0 interface, and also acquired the Seagate Thunderbolt Adapter for Backup Plus Desktop Drives and Thunderbolt cable.
I do a redundant backup to the Seagate Drive using both Carbon Copy Cloner (nightly) and Time Machine (hourly) using its Thunderbolt adapter. BTW: One never knows when Time Machine will choke - see discussion titled, "UPDATED: Serious Time Machine bug on Mountain Lion", which I had; Rest In Peace Pondini (James Lewis Pond).
Booting from the external Seagate Backup Plus via Thunderbolt inteface from System Preferences -> Startup Disk:
I select the Time Machine OS X, 10.8.5 Startup Disk (Thunderbolt attached drive), click Restart, confirm my choice, the computer reboots, however, it reboots from the internal Macintosh HD OS X, 10.8.5, NOT the selected external Thunderbolt drive. The SSD drive was used as the Startup Drive, not the selected external Time Machine volume as indicated by the display free disk space command (df(1)) and seeing that the Macintosh HD OS X, 10.8.5 volume is mounted as root. That is very deceptive in that both the internal and external drives will appear in the same manner from a GUI point of view! OS X doesn't even inform me that it did not boot off the selected volume. This is the first half of the problem, that is, Is it possible to boot from an external Thunderbolt disk drive? In my case, the answer is deceptively No. Can anybody else boot off a Thuderbolt attached disk drive? Note that if I remove the Thunderbolt adapter, and attach the drive via its USB 3.0 cable, the MBP boots off the external Seagate Backup Plus just fine, as is expected.
Booting from the external Seagate Backup Plus via Thunderbolt inteface from boot-time "Option - Select startup disk" method:
When I restart the MBP using the startup Option key to select the startup volume, the externally connected Seagate drive ONLY SHOWS UP if it is attached with the USB 3.0 cable, not when it is attached with via the Thunderbolt interface. Can anyone else boot off a Thunderbolt drive with the startup Option key sequence? At least the MBP doesn't deceive me in this case - I know right away that the external Thunderbolt drive is not an option when connected as such.
Time Machine restore from the external Seagate Backup plus via Thunderbolt interface from the "command-R - Recovery Parition" method:
After booting from the recovery partition, I attempt to perform a Time Machine restore from the Thunderbolt connected Seagate Backup drive. When Time Machine attempts to present me with a viable backup Time Machine volume, the external Thunderbolt drive is never offered as an option. So I switch the Time Machine volume to use its USB 3.0 interface, and then Time Machine displays that drive as an option, and the MBP proceeds with the restoration as expected. The interesting thing to note is that while booted in the recovery partition via the Thuderbolt cable, the MBP Disk Utility may be selected, and the Thunderbolt attached drive may be operated on just fine. Can anybody else restore their MBP using Time Machine and the Recovery Partition via the Thunderbolt interface?
This is also a big problem for me in that I am forced to restore my MBP via Carbon Copy Cloner using the USB 3.0 interface, because I cannot even boot off that volume's Thunderbolt interface. Of course, the option may be that I could use yet another eternal USB 3.0 drive, boot from it, and then use Carbon Copy Cloner to restore the Macintosh HD via the aforementioned drive connected by a Thunderbolt cable, but that is less than ideal and not elegant, so I'm not going there.
Another side issue is that the commercially available program, TechTool Pro 7's eDrive, which I installed on the Time Machine volume, will not boot off that eDrive as advertised, but I won't got through those steps here, because that would be beyond the scope of this issue, however, I must say, It does not work either when the Time Machine volume is connected via the Thunderbolt interface, but works just fine when connected via the USB 3.0 interface.

If this helps anybody else make a decision about whether to consider Apple because of Apple's superior customer service:
Apple sells this entire line of drives right in their store, from 1TB to 4TB. I spent 1 and 1/2 hours, yesterday, confirming that the 3TB model IS NOT 100% Thunderbolt compliant. A MBP cannot boot, nor can it Time Machine restore from this drive, though EVERYTHING about the drive is normal.
Apple's South Coast Plaza store management had at least two responses to me personally about how to proceed:
1. Buy a different drive from another drive manufacturer, and to attempt to return the drive to COSTCO. A lead genius suggested going with GTech drives, for instance.
2. Wait for Seagate to fix their problem.
I told Apple management in the store that the drive is advertised as Mac Compatible (see picture) and that it is advertised as being a Thunderbolt drive (see picture). I pressed management that my purchasing decsion to get the best possible MBP Retina was based on the availablity of Inexpensive Devises (raID), and that not having this complete compatibility is a show-stopper for my needs, and that I wanted a refund. Their response? They needed to talk with "Merchendising" to see if they are on or off the hook for these kind of 3rd party assertions, and would get back to me.
I am not holding my breath.
Note: I do not hold this against the Geniuses that helped me, nor against the management I've dealt with, nor the upper level engineers that I've corresponded with through Apple Care - their problem solving skills were helpful - although I could have arrived at similar conclusions given enough $$$. (For instance, try a Lacie TB drive and see if that works - we did, and it did not work. Or, we have a different TB cable and a different TB adapter, let's try those - we did, and it did not work.) I blame myself for not doing enough homework before going with Apple's solutions.

Time Machine Restore Mangles Permissions and Groups

Circumstance:
My Macbook Pro running 10.5.5 gave a gray spinner after a restart last week. The restart was to clear out a couple of system processes eating up CPU when I had left it alone for a few hours.
Action:
After Disk Utility, zapping PRAM, and the probably some other standard trouble-shooting actions didn't fix the stuck start-up problem, I decided to try a full system restore from my Time Machine backups. I had previously successfully restored individual folders and files. Time Machine backs up wireless to a USB hard drive connected to my AirPort Extreme. To speed up the restore, I ran an Ethernet cable to the MBP from the Airport. The restore completed successfully. All the folders & files are correct, looks the same, etc. I restarted using the restored boot drive.
Problem:
The MBP is like a museum now--I can look but I can't touch. I first noticed something was wrong after logging in the first time because I couldn't move a file into a folder via drag-n-drop. Then Terminal went into a spinning beach ball when I opened it. Spotlight was not running. Then I noticed that my entire boot disk was read-only. I got info on the boot disk, and the Users & Groups list was strange--everyone was read-only, "wheel" had read-write and was the owner, and staff had read-write. Basically, it's like me, the Finder, an all applications have lost all their write/execute permissions on the entire drive.
*Unsuccessful Steps Taken:*
Ran Disk Utilities' Repair Permissions from Leopard dvd. Ran fsck -fy after mount / -uw from Leopard dvd Terminal and from single-user boot mode. Time Machine restore direct from TM disk via USB. Joined my user to wheel group. Changed my user password from Leopard dvd (which repairs home folder permissions). Played with chown to make all wheel-owned items staff-owned.
*Open Theories:*
Airport Time Machine restores strips ACLs and Permissions. I have to restore over wireless, not ethernet or usb. My TM backup is screwed up somehow.
Whew. This has been going on for a while, so I'm ready to give up and do an Archive & Install and begin manual migration from the backups, but my MPB is a fine-tuned machine and I hate to lose that, especially since it taunts me by being so close to normal (I can see everything! My desktop background and apps are there!).
Any help much appreciated!

The "full restore" from Time Machine is only for OSX drives.
For data-only drives, use the Time Machine browser (the "Star Wars" display). See Time Machine - Frequently Asked Question #15.
Depending on your setup, you may also want to review Transferring Home Folders not on a Startup volume.

Time machine restore help

I've recently been having issues with my early 2008 black Macbook. I ran the apple HW diagnostics and determined it is a bad hard drive. I went out and bought a new 500GB SATA HD, and attempted to restore my system using a Time Machine backup. I booted into the Leopard Disc that came with my computer, formatted the drive, and ran the Time machine restore. Everything appeared to go fine (took about 2 hours, no error messages). However, after the machine rebooted and attempted to boot into OSX an error similar to this popped up. http://img149.imageshack.us/img149/7792/pict0017lo8.jpg
Any thoughts as to why this is happening? I don't really want to start over with a clean install, that's why I have Time Machine!
Other information:
My computer originally had Leopard, and was upgraded to Snow Leopard.
I have boot camp setup on my mac for Win 7. (I know this isn't backed up or restored as part of a time machine backup, which I'm O.K. with.)
Thanks in advance for all your help.

Any number of possibilities. First, did you prep the drive properly:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Any brand new drive should be setup per the above because they usually are configured for use on PCs rather than Macs.
Second, depends on how you went about the process of restoring your system. Select Mac Help from the Finder's Help menu and search for "time machine." Look for an article specifically about performing a full system restore. Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
What you saw was a kernel panic screen. Panics at startup may be indicative of a hardware problem. You might give this a try:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
To assure the problem isn't with your backup you might consider installing OS X by itself. If all is OK, then you can complete the TM restore using Migration Assistant.

Time Machine restore from WD my book live duo

Dear all and especially anyone out there who may be able to help me.
I have a MacBook Pro with Mountain Lion, a WD mybook live duo 3/6tb on the LAN, all wired.
It has been backing up through Time Machine fine until my MacBook crashed earlier this week so I have a fairly
recent snapshot of my MacBook before the crash.
I wanted to restore, after a Hard Disk erase which seemed necessary, from Time Machine but I couldn't make it work
as it kept asking me for user names and passwords of the NAS (which I entered of course) only
to result in error meesages saying the 'share' didn't exist. (Despite the fact that it does immediately
recognise the backup and location on the NAS.)
WD support advised me to first reinstall OSX ML and then use the regular Time Machine
functionality to restore my Mac.
- there is no option to fully restore your Mac through the wonderful TimeMachine time travel
functionality. I tried to restore my Macintosh HD back to a recent time point but that resulted in
nothing much (or nothing at all, I don't know). I don't see my old stuff, I still see a kind of vanilla
OSX ML installation.
- using the restore functionality (CMD-R during startup) and the time machine restore option,
results in the same nagging for names and passwords and error messages that the share
doesn't exist.
WD support couldn't tell me what the share name (and possibly password) would be for where it stores Time Machine backup
files (it doesn't show up in the list of shares when you look in the WD dashboard) and that makes sense to me as when you
tell Time Machine to use the NAS, it doesn't ask you for anything in terms of shares or passwords either.
So here I am: with probably a very good and recent complete backup at my disposal but no way of restoring it to my Mac.
So all I had and trusted to Time Machine is lost.
Is anyone out here who can help me? Anyone with a similar experience and hopefully solution? (That I can understand....I am a Mac user! :-) )
I would be enormously grateful!
Greetings from Amsterdam,
Eric

Hello Eric, not sure if this helps or is exactly what you are looking for as I am unfamiliar with the NAS issue you have. However, I recently restored my computer from Mavericks back to Snow Leopard using my WD mybook. At first I was unable to use the WD mybook for restore, as is was not recognized by the computer after the menu came up from pressing "command R" during start up. I attributed this to the WD software requiring a password to access the drive. This is the same password that you (anyone who owns a WD mybook) have to supply each time you want to use time machine to back up files. There is a simple remedy I found. You need to go to your applcations and select "WD SmartWare," type in your password, then select the "Settings" tab at the upper right hand conner. Then select "Set up drive." On the right side of the window there is the "Set Security Options," sign in using your password in the box displayed under "password," then select "Remove Security." The last step would be to save the security setting, and you are all set to use your WD mybook without a password for full system restoration. So when you restart your computer and hold (or as I found press many times) the "command R" to access the restore window at start up, you can select restore from time machine, and have your WD mybook now appear in the timemachine device window, as the device is not password protected anymore. Once your computer is restored you can follow the same steps outlined above to reinstate your password for your WD mybook. Best of luck,
Marc

Log-ins don't work after an OS X Leopard Time Machine restore

I upgraded the RAM and HDD on a Santa Rosa MacBook and then did a Time Machine restore from my old iMac G5 Time Machine backup. Everything seemed to go well but afterwards my login and admin passwords were no longer accepted. Any ideas on how to fix this?
Thanks.

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Time Machine restore leads to strange file permission issues

I've had three Mac laptops over the last 8 years. It all started with an iBook. When I bought my first MBP I used the "migration assistant" to move my files over. I started using Time Machine when it was released. I then upgraded the hard drive on the MBP and used Time Machine to restore the data. Later, I bought another MBP and used Time Machine to transition all of my files.
Each Time Machine restore was flawless.
The problem comes from my most recent hard drive upgrade (details are below). After upgrading the hard drive on the second MBP I did a Time Machine restore, which appeared to complete without incident. However a couple of problems, which are probably related, have cropped up.
After clicking on Firefox.app I get "Profile Missing Your Firefox profile cannot be loaded. It may be missing or inaccessible."
The following message is printed to the console: [0x0-0x31031].org.mozilla.firefox[493]: Error: Access was denied while trying to open files in your profile directory. com.apple.launchd.peruser.501[275] ([0x0-0x31031].org.mozilla.firefox[493]): Exited with exit code: 1
I tried to delete my old profile from ~/Library/Application Support/Firefox and the problem persists. Running /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager results in the same error.
The file permissions on the ~/Library/Application Support/Firefox directory are:
drwxrwxr-x 2 my_name staff 68B Feb 20 08:31 Firefox
I'm at a loss here because the permissions look correct. When I run the ProfileManager as "sudo" it starts correctly and let's me edit/create a profile for "root".
I've repaired permissions several times, and the disk utility (and Onyx) don't report any problems. A very similar problem occurs for MS Office problems. When I launch Excel (or any other office app) I get an error message saying that the MS Office Database can't be used. Also interesting is that it builds the font cache every time. If I'm not mistaken the font cache and Office database are also stored in profiles, but not under ~/Library
Short story long, after a Time Machine restore some apps can't seem to write profile information, but the file permissions look correct and Disk Utility can't find any problems with my new disk.
Any help or pointers would be great.
Here are the details on the new hard drive:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10TPVT-00HT5T1
Revision: 01.01A01
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 5200
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 668.89 GB (668,892,172,288 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /

You might try the following to repair permissions in your Home folder. Disk Utility does not repair permissions in the Home folder.
To fix Home folder permissions
Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
sudo chown -R `id -un`:`id -gn` ~
Press RETURN. You will be prompted to enter your admin password which will not be echoed.

First Complete Time Machine Restore

Similar Messages

Maybe you are looking for