First time data is not transported to pop up window through event handler

Hi all,
I am using NWDS 7.0, Now I want to open a pop up on click of a action link.
There are two DCs DC-A and DC-B.
I am calling action from DC-A to DC-B. DC-B contains view of pop up window.
In DC-A I am using intreface controller of DC-B by using used coponents.
Now In the DC-B used components I have created one fireplugin which is connected ith pop up view of DC-B and that firplugin is called from DC-A action to transport data from Dc-A to DC-B.
Problem : when I click first time to open pop-up window then event handler is not called but the windows opened. When I close that window and again open the transported data start displaying on pop up window.
So can you please help me that why first time data is not transported to pop up window.
Thanks
Kaushal

You'll need to use an OARawTextBean. Oracle doesn't support opening links in new windows using OAFormattedTextBean. Just be aware that you'll need to set the CSS class in the HTML as well if you need it formatted a certain way.

Similar Messages

Hope I'm in the right place. First time user. Not tech savvy. Just upgraded to OSX Mavericks. Box keeps asking me to enter my iCloud password. I keep entering my password but box keeps popping back up asking for password?! I selected cancel but what

Hope I'm in the right place. First time user. Not tech savvy. Just upgraded to OSX Mavericks. Box keeps asking me to enter my iCloud password. I keep entering my password but box keeps popping back up asking for password?! I selected cancel but what should I do next time it asks for my iCloud password? Is my iCloud working? How do I retrieve my password?
Thanks

In the iCloud pane of System Preferences, uncheck the box marked Mail and check it again.

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

Time/date will not update

After updating software, the time/date will not update. My network is fine and I can get to the internet fine. Also will not accept my apple ID

Try restarting the Apple TV by removing ALL the cables for 30 seconds.

HT1338 I have hand this Mac for 4 years. Today for the first time mail will not do anything when I hit send. It is receiving but it will not send. Can anyone help?

I have an IMac running on 10.6.8 and today for the first time mail will not do anything when I hit send. Can anyone help out there?

Check your Window menu -> Activity menu to see if anything is really not happening. If it isn't happening, check your settings.

Firefox will not open, a pop up window message says: The application or dll mozilla firefox xul.dll is not a valid windows image. I am using XP and firefox use to work perfectly

Firefox will not open a pop up window says "the application or dll c:program files mozilla firefox xul. dll is not a valid windows range"
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB0.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)

I resolved the problem. I went to CNet and re-downloaded the upgrade. It proceeded as intended and the upgrade is installed and running with no loss of plug-ins, bookmarks, etc.

Cursor does not change for pop-up window

I created a link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

Hi Todd,
i got the same problem.(cursor not change for pop-up windows) and because i m not an expert in internal html code i did try several solutions to fix it.
The easiest (but also even longer if u need to do severals) is to create a button (withs 2 overflight changing pics) with "inserer", "image survolée"
the "image survolée" can be linked to a pop-up window with the correct effect. To do so highlight the "expected new link to" and on right side task bar ad a "comportement" named "ouvrir la fenetre du navigateur" and optionally choose the size and windows available function of the pop-up. It works even if u need to proceed first with an overflight changing button.
The result is longer to obtain and not absolutely perfect. So I guess it s only an help solution for a single mateer. i would be glad to get another solution with a text link rather than using the overflight button system. Technically it should be better, more efficient and faster to proceed with applying an html code that really makes the text appearing as a classic link to a new windows whatever pop up or full size window. Please let me know if u get further answer to fix this problem.
Many thx and excuse my technical english translation about DreamCs4

Re: Charging for the first time - I have not connected yet to my Itunes, so can I just go ahead and plug it into an outlet and charge?

Can I charge my new Ipad for first time but just connecting it to a wall outlet, even though I have not yet registered it on my ITunes account? If so, how long will it take for a complete charge?
Thanks

jeanfrombranford wrote:
Can I charge my new Ipad for first time but just connecting it to a wall outlet, even though I have not yet registered it on my ITunes account?
Yes but it's not necessary to fully charge it the first time.

First Time Machine backup not the same size as my computers HD

I just completed my first Time Machine backup of my computer's hard drive. I have a 160 GB hard drive (actual capacity = 148.73 GB) with 145.43 GB used. I expected my backup to be the exact same size or darn near close. When I did a "Get Info" on the backup, its size was 62.11 GB. I looked through some of the files of the backup and it LOOKS like its all there but can't be certain of it. I would like to know the answer to this and PLEASE PLEASE DON'T give me the run around! IE: go see this page, go see that page, click this link, etc.! Just give me the answer straight up. I've already been looking all over this forum and at other Time Machine websites and have NOT found a good answer. I would REALLY appreciate just a straight up answer! Thanks!

Would you like me to give you a complete list of every website I have looked at? Would that help? Well, here they are:
http://support.apple.com/kb/HT1427?viewlocale=en_US
http://web.me.com/pondini/Time_Machine/D2.html
http://hints.macworld.com/article.php?story=20071101005330768
http://web.me.com/pondini/Time_Machine/D5.html
http://www.tech-recipes.com/rx/2655/leopardtime_machine_delete_files_folders_frombackup/
http://www.google.com/search?client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial &channel=s&hl=en&source=hp&q=DeletingTime+Machine+backup+files+in+MacOS+X&btnG=GoogleSearch
http://www.apple.com/feedback/timemachine.html
http://www.macupdate.com/info.php/id/26704/timemachineeditor
http://discussions.apple.com/forum.jspa?forumID=1342&start=75
http://web.me.com/pondini/Time_Machine/A4.html
http://discussions.apple.com/forum.jspa?forumID=1342&start=0
http://web.me.com/pondini/Time_Machine/D7.html
Those are all the websites I have visited in regards to Time Machine. Other then that, I have for the most part already stated what I have done. Hope that helps.

Time/Date Field Not Returned in PDF

I have created a very simple form in LiveCycle Designer 8.0. The form enables the user to input data into columns labeled "name," "change type," and "change date." I used the date/time object for the "change date" row fields.
When my testers (using Acrobat 7.0) email the saved form back to me, all of the fields are populated with the information they entered, except the "change date" column fields. I asked if they used the flyout calendar or typed in the date manually, and all used the calendar.
Is this a compatibility issue, or is there something I need to do to bind the chose value to the field when the form is saved?

The issue with the time portion of date field not displaying in Data tab of a Table window has been posted before - see date format while browsing data
I still get the problem in v1215 connecting to either 9i or 10g databases. Note that this problem does not happen in the SQL Worksheet results area, so simply querying the table data with a select doesn't test this.
As for Ctrl-C, Ctrl-V changing the date format to MM/DD/YYYY HH24:MI:SS when copying data out of the SQL Worksheet Results - I also still get this in v1215.

First time EDL exporting - not working

I am a longtime Premiere user, but I am exporting an EDL for the first time today. I decided to do a simple test - I put a few .m4v video files into a timeline, made a few random edits with the razor tool, and then exported the timeline as an EDL. When I import the EDL into a new project to test how it did, it knows to put those video tracks into the timeline, but it doesn't make any of the edits that I made. What am I doing wrong?

1 video track, 2 audio tracks. As for the edits, they just aren't there. Here's a screencap of the original timeline that I am testing with:
That's three videos in the timeline, with a bunch of cuts made to the first one.
I then exported an EDL, started a new project, imported the EDL, and it looks like this:
Notice that it's putting the three videos into the timeline, but none of the cuts that I've made are in there. Basically, it knows what elements to bring in, and that they go into that timeline, but they left out all of the work I did on it.
By contrast, I exported a "Final Cut Pro XML," imported that into a new project, and it worked perfectly.

POWL OBN links do not open a pop up window in one domain

Hi
I am hoping to get some helpful information on a problem with a POWL OBN links not opening a pop-up only in one domain. The issue is described below.
We have deployed the BP for Buyer 1.0, SP15. One of the iViews we use is the My Purchasing Documents and we have enabled the query POWL_PR_MY. Our Portal Version is 7.0 SP21, ECC6 (no EHP).
Query POWL_PR_MY (My Purchase Requisitions) of POWL Application OPS-BUYER-POWL-PURDOC has links with the Purchase Requisition Number. Ideally when the links are clicked on, it should open up the Purchase Requisition transaction with the details of the item. This does not happen in our case.
Our Portal Server is on the domain main.nex.com, but is accessed from the domain drs.nex.com. The ECC is also on the main.nex.com domain.
When we access this application using "portal.main.nex.com", the links work fine as they should. But when we access the application using "portal.drs.nex.com", they do not open at all. There is no error message displayed. It just simply does not do anything.
We have added *.main.nex.com to our local intranet trusted sites and have enabled pop-ups, added the proxy exception
*.main.nex.com. All the Pop-ups are working from the other Custom Webdynpro application and from the other SAP GUI for HTML transactions in the portal from domain "drs.nex.com".
I am not sure what the problem is, but we are facing a problem ONLY with this application's links. I am not able to see anything in the nwa logs too.
Any pointers as to where I can look for issues?
Thanks
OJ

Hi Malte
No luck yet - so we are currently using portal.main.nex.com to access our portal until we find a solution. Will keep you posted. In the meanwhile, if you do find some information, please update.
Thanks
OJ

A question about not having a pop up window for the hyperlink

Hello!
Now I am creating a hyperlink in my InDesign. After I transferred my indesign file into pdf and clicked on the link. There was always a pop up window asking me if I agree on going to this website or not. I don't want the people who recieved my ducument have this trouble. Is there a way for me to fix this? Thanks!

See: http://helpx.adobe.com/acrobat/kb/security-warning-trusting-pdf-acrobat.html

Camcorder time/date stamp not working

I am working on a new movie. I loaded about 20 minutes of raw mini DV from my camcorder, and it loaded onto the clips plane just fine. I wanted to add a second tape, made on the same camcorder at a slightly later date, but this tape does not change clips for every scene change. I checked iMovie preferences, and the coreect box is checked; I repaired permissions. The second tape still grinds along for nine minutes and changed for each clip. Does anybody have any thoughts? Thanks in advance for your help.
Mike Ryan

Welcome to iMovie Discussions.
If the 2nd tape was ".. made on the same camcorder at a slightly later date, but this tape does not change clips for every scene change.." that suggests that the internal clock battery in the camcorder had run down, so there was no date/time stamp.
Some camcorders use a separate flat, coin-sized cell to keep the clock going, and will do so for months - or years! - after the main camcorder battery has gone flat.
Others have a small rechargeable cell inside, and that gets recharged by the main battery. So if, or when, that main battery goes flat, the extra rechargeable cell also goes flat after a few weeks or months - hence no date or time.
It sounds as if this is a seldom-used camcorder, and that the main camcorder battery went flat, or was removed, and then the internal date/time cell ran out of juice.
Before that camcorder is used again, its removeable/replaceable date/time cell should be replaced, or - if it's an internal recharging cell - the main battery should be recharged and left on the camcorder for an hour before it's used. Then - in either case - the camcorder's clock should be reset before shooting.

First time data is not transported to pop up window through event handler

Similar Messages

Maybe you are looking for