Fiscal year key figure

Hello All,
I am building a report which gives the total PO amount for vendors by year.
This is the way It requires to be
Vendor      PO amount- 2009        PO amount- 2010
The years 2009 and 2010 are fiscal years. I am confused about how to get the restrict the Fiscal year.
should i use the fiscal year variant or period.
Thanks,

Hi,
Make two variables of fiscal years , one for current year and other for the previous year . As in ur scenario the current year 2010. for the previous year through replacement path you can set the value current year -1.
Now make the two RKF one for Current year amount and second for previous  year amount. Restrict current year amount through current year variable and previous amount with  previous year variable . now you can use both the RKF in query .
Hope this will work
With Regards
AVenai

Similar Messages

  • How to design for YTD, Monthly & Last year Key figures

    Hi Gurus:
    Can you pls tell me how to design a data model, where a user wants to get YTD, Monthly & Last year Key figures say Sales volume...
    Is aggregates the answer?
    Pls let me know...Thanks a lot

    Hi Vijay,
    I am a beginner in BI field.
    I have a problem till now i couldnt get the right answer.
    That the reason why i write you today.
    My Problem is with a Query.
    I'm designed a dynamic query which should look like this:
    12.2005-- Jan06 --- Feb06 --- Mar06 --- Apr06 ... Dec06 --- YTD
    My Problem, if you give per e.g Dezember, all Months have to appear. Or you give may, your going to receive till may.The result i receive till now its only the month i gave.How can i get the correct answer? How i am going to calculate the YTD?
    You can directly answer hier:[email protected]
    Thanks

  • Fiscal Year / Periods does not show properly in WebI and compunding

    Hi,
    I have few reports where I am using Fiscal Year /Period as filter.
    I have created a Universe on the top of a SAP BI Query and did not do any customization.
    Then I created a WebI report. In this report I created various filters beside Fiscal Year / Period. When I run report, filter window opens. I can select all other filters but when it comes to Fiscal Year / Period it does not show me the values I want to see. It shows AUG 0001, APR 0025 etc. I want to see AUG 2010, MAR 2009 etc so that I can select them and get the data of the required Fiscal Year / Period. In Cube I have the required data. If I select MAR 0010 etc I donu2019t get any data.
    On the other hand if I put fiscal Year / Period in columns or rows it shows the right value.
    If also run SAP BI Query and Fiscal Year / Period in Variable then on variable screen I can see the right value from where I can select and get the required result.
    Do I have to do any step at Universe level or something else?
    It seems that Fiscal Year / Period is compounding.
    Is there any help?
    Thanks
    Bashir Awan

    Ingo,
    for thanks for igniting my thoughts in this regards.
    Yes these values do exist in SAP BW.
    It is some how compunding the values at filter level.
    It does not let me see the whole value when filter screen popup in BOBJ.
    In SAP whole value shows when variable screen popup, I see three columns Fiscal Year / Period. Text, Posting Period Key, and Posting Year Key.
    Fiscal year / Period Text which shows Aug 2009, Posting Period Key which shows our period 1 to 16, and Fiscal year key which shows 2009 etc.
    Is there any setting in BOBJ which compunds the year for variable screen so that we may see the whole values for filters?
    thanks

  • To get Fiscal period based on Fiscal Year

    Hi Guys,
               Can anybody tell me how to get Fiscal period based on Fiscal Year?
    Thanks,
    Arpan

    Hi Anshu,
    Have a good day.
    I need to convert fiscal year(2011) to fiscal period(2011001).
    Fiscal year(key field in data source) mapped to the fiscal period(key field in infoprovider).
    But in the transformation when I have mapped these fields, data is not coming propperly into the infoprovider because in the transformation its not converting fiscal year to fiscal period.
    This is the scenario. Please help.
    Thanks,
    Arpan

  • Fiscal year in the columns outside the key figure structure

    Dear Experts
    I have a report requirement to show the keyfigures in the columns from year 1 to year 10 and in each year there are 4 keyfigures each restricted to 1 quarter for 4 quarters.
    So, there are too many keyfigures to create.
    I am using fiscal year in the columns outside the Key figure structure containing the keyfigures restricted at each of 4 quarters.
    So, when the report displays, all the 10 years will automatically be displayed.
    The problem is one of the 4 quarter level keyfigures needs to be restricted by calendar year.
    How can I read what is the fiscal year for each column at runtime so that I can reference this value to determine the calendar year ?
    As you know, each FY spans 2 Calendar Years. So, i need to restrict this on the 4th keyfigure by calendar year but while having the FY outside the keyfigure structure i can get all the FY, I am not sure how to access this value at runtime so that eg.
    if FY for column 1 is 2010, i can set calendar year to be 2010 to 2011.
    Hope you can give me some clues.
    Thanks you Gurus!
    Best regards
    John

    Dear Sunnybt
    Copy Riyes,  I find your response interesting. Please could you elaborate your idea of using condition in more detail.
    Sorry for my late response.
    Allow me to clarify my statement, which you are right, is unclear.
    By :
    "if the current QuarterFY is less than the current QuarterFY"
    I mean :
    eg. user enters FY range : 2009 to 20NN  (eg. 2017)
    KF_column1_FY2009_Q1______KF_column2_FY2009_Q2____KF_column3_FY2009_Q3______KF_column_FY2009_Q4______KF_column_FY2010_Q1______KF_column2_FY2010_Q2____KF_column3_FY2010_Q3______KF_column_FY2010_Q4_____KF_column_FY_NNNN_Q1
    For each column, where the FY can be any year range entered by user,
    the Text Description of the Column should show either 'Actual' or 'Plan' based on what is the current FY Quarter at runtime.
    If the FY Quarter (eg. 1st column is 200101) is before current FY Quarter (i.e 201103), then the Description of this column should be "Actual" , else "Plan".
    In my current design, I am unable to use customer exit text variable to meet this requirement.
    So, I like to check with you for fresher ideas.
    If not , I would use a workbook, which I am avoiding as the user needs to drilldown and I believe drilldown is not possible in workbooks where report layout needs to be rigid or cell positions fixed. Of course, unless there is a way out of this which I do not know.
    Best regards
    Bass

  • How to cumulate key figure for whole fiscal year with one time variable?

    Hello everybody!
    I have a problem creating a query that allows to get cumulated key figure for <b>whole fiscal year</b> (FY), when I actualy type <b>only last period</b> for the FY.
    The query itself is very simple:
    - I have "Organization" characteristic in "Rows" section
    - I have one key figure "Number of invoices" in "Columns"
    - I have "Fiscal year variant" 0FISCVARNT defined in "Filter" that has 12 periods within Fiscal year
    and then
    - in section "Free Characteristics" I have "Fiscal year/period" 0FISCPER.
    I want to be able to provide ONE single value when run query, which is last period of a FY (like 012/2003), but then in report see cummulated number of invoices for WHOLE fiscal year.
    Will appreciate any help!
    Vitaliy

    Please see the white paper entitled "How to... Derive a Variable value from another variable 2.x (pdf)".
    Regards,
    Troy

  • Displaying Restricted Key Figure Based on Fiscal Year

    I'll try and explain my problem.
    We have created a query using the CCA cube. We created 3 restricted key figures each with a different budget plan version. They are called 'AB' ,'PB' and 'RB'. When the user runs the query it will show planned values out for 5 years. So for example right now we are in Fiscal year 2006.
    The problem is that 'AB' is only valid for year 2006, 'RB' may only me valid for 2007 and 'RB' may only be valid for 2008 - 2010. They use a different plan version for different years, If I place all three columns on the report I get zeros when the plans are not valid. Here is what I would like: When the fiscal year changes somehow select the correct restricted key figure to show and also adjust the text to reflect the fiscal year.
    Its like my variables are dependent on the fiscal year displayed.
    Any help would be great.
    Rick

    Hi Richard,
    Have you tried out the Suppressing Zeros options in query properties...if the whole column is blank for a particular year, you should be able to suppress it. Click here for more info:
    http://help.sap.com/saphelp_nw04/helpdata/en/1e/99ea3bd7896f58e10000000a11402f/content.htm
    You can use text variables in the RKF description to reflect the year for which the data is being displayed.
    Hope this helps...

  • Non cumulative key figure and fiscal period 13

    Hi,
    We have defined a non cumulative key figure. In the cube, the non
    cumulative characteristic is the fiscal period (0FISCPER).
    This non cumulative key figure works fine from period 1 to 12, but
    displays nothing for period 13 (and 14, 15, 16).
    We want to display the balance for the special periods 13 to 16, Is
    there a way to do it?
    Thanks,
    Gabriel

    Hi,
    Yes I am sure, there are some amounts posted in period 13. And even if there are no amount posted, there was a balance in period 12, so the balance should stay the same in month 13.
    The balance in month 1 of the next year is correct: balance of period 12 + amount posted in periods 12, 13...
    Gabriel

  • Key Figures By Fiscal Period Dissappear -

    Some Back Ground on the problem query.
    I have 4 calculated key figures. Each one represents 4 quarters of a year. Each one is a sum of three RKF’s. For example CKF1 (Quarter1) is a sum of RKF1 (Period I), RKF2(Period2), RKF3(Period3).  I have created a key figure node for each of the CKF’s and assigned the RKF’s accordingly. So Quarter 1(CKF1) when expanded will contain the period 1(RKF1), 2(RKF2) and 3(RKF3).
    Scenario 1
    I have the nodes of the CKF set to collapse by default.
    I run the query, no issues, the RKF's nicely roll up to the quarters and they show up in the CKF column.  But when i expand the quarters, for example the 1st quarter CKF, the values for each of the RKF do not show.
    Scenario 2
    I have the nodes of the CKF se to expand by default.
    I run the query, no issues. This time, the quarters (CKF's) and the individual periods(RKF's) both show up. No problem.
    But when I collapse any quarter (CKF) and expand, RKF's disappear.
    Summary: When I expand or collapse a node, the key figures under the node disappear.
    I am leaning towards researching on some OSS notes for this. If anyone has come across this issue and already know an OSS note, please let me know.
    Thanks a Ton!.
    Vamsee.

    Hi,
    I hope, you are entering  values 009.2006 to 011.2006 for the variable "From Fiscal Year/period to To Fiscal year/period". Am I right?
    If so, Donot restrict the fiscal year period with "From Fiscal Year/period to To Fiscal year/period like as you mentioned:--
    <i>Above this Structure have kept Fiscal year/period info object with variable "From Fiscal Year/period to To Fiscal year/period.This is because i need period wise breakup.</i>
    To get the break up Priod wise, taking Fiscal year period characterstics above  the structure is sufficient with ou any restriction.
    Under the characterstic fiscal year period take two KF (same kf called SALES QTY two times with different heading like " last year Actual sales" and "current year Actual sales ") . First KF will be restricted with customer exit varible on Fiscal year period characterstic. Second KF will be restricted with user entry varible on Fiscal year period characterstic.
    In case if you enter the value 009.2006 to 011.2006 as the iput to user entry varible, the code should generate the value 009.2005 to 011.2005 to Customer exit varible.
    With rgds,
    Anil Kumar Sharma .P
    With rgds,
    Anil Kumar Sharma. P

  • Key Figure format in Years and Months..

    Hi,
    Is there any Key figure similar to 0SRVCLENKYF (Length of Service (in Years)) part of Headcount and Personnel Actions, which should give me value in Years and Months..?
    Thanks in Advance,
    Thanks,
    Madhu.

    For curiousity sake...if you use the FIMA_DECIMAL_MONTHS_AND_YEARS Function Module, the output that you'll get is a months and years in fractional amounts. So, how are you going to get the Years and Months from this?
    For example, if the from date is 20000101 and the to date is 20090914, the results from this Function Module will be Months = 116.42740 and Years = 9.70228. If you do use this, I'd suggest taking the whole number from passed value for years (9 in this example) and then calculate months by taking the franctional amount of the passed value for years and multiple it by 12 (0.70228 * 12), you end up with 9 Years, 8 Months (8.42736 to be exact, but you're going to want to truncate it to 8 so that when it goes above 8.5, the value doesn't become 9 when it still should be 8).

  • Changing Depreciation Key for Tax for closed fiscal years -

    Hello,
    Hoping someone can help me with this question - Is it possible to change the depreciation key for closed fiscal years - we need to change it for Tax - books. And if yes - does it mean we need to open closed fiscal years ??
    Thank you,
    Richa

    Hi,
    you will need to open the FI and AA periods. After changing the depreciation keys do the necessary dep run and close the books in the correct sequence.There should not be problem.

  • Account not posted to in fiscal year 2010 or trans. figures arc

    Hello  Experts
    i am getting the following error in fs10 while seeing the balances at balance sheet level after done full settlement in CJ88
    Account 172001 0219 not posted to in fiscal year 2010 or trans. figures archived
    Can anybody please give me suggestion?
    Thanks and Regards
    vamsi

    Hello Exports
    thanks for your help
    My problem was solve by my slef
    thanks
    vamsi

  • Key figure comparision between current year and previous year

    Hello collegues,
    I have created a WEB Intelligence report with key figure ROI (return on investment which is calculated out of three other key figures (capital, revenue and costs). I would now like to calculate the percentage period (year) differences between key figure ROI - between current year (month) and previous year (month).
    Do I have to add coding within a key figure formula within WEBI Rich Tech client or within universe builder.
    The key figures were extracted from SAP BW and added to a universe which is basis for WEBI rich tech client report.
    thanks and regards,
    Christian

    Hi Stratos,
    so I see - i have to use the variable Editor and then define a measure and add coding in the formula field. Do you have an e-mail address ín order to send you the report and explain in more detail what I would like to see - here it is not possible to upload a report...
    thanks and regards,
    Christian

  • Key figure display in planning book with respect to Time bucket profile

    Hi,
    I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
    How to make the total quantity 85 to show in the current and future weeks only.
    thanks and regards
    Murugesan

    Hi Murugesan,
    Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
    In this below case, what time characteristic do you have in cube? Is it date, week or month?
    If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
    This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
    If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
    If it's months, then you would need to find out how much data would go to the days in the past week of the month.
    The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
    Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays.  The only other exception I can think of is that you have data in teh days mentioned above.
    It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
    If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
    Thanks - Pawan

  • View creation and populating key figure to datasource appended field

    Hi
    the data we want is like in 4 tables
    J_3GVERSI  +  EQUZ + ILOA+ ANLC
    HOW should i create a view on these four tables .
    j_3gversi _ equnr
    equz - equnr, iloan
    iloa- iloan(key), comp code,asset no,asset subno
    anlc- comp code asset no asset sub no
    my two key figure values are in J_3gversi , and 1 more keyfigure i will append it to my datasource on this view and the value for this  will be obtained if i give 5 field values( from ANLC(table), compcode,asset no ,asset subnumbr, fiscal year and depreciatio area in where condition for select statement in cmod .)
    to give these 5 values in the where condition in my cmod code for my datasource I tried to make this view.
    i have linked
    j_3gversi  with equz - using equnr
    equz with iloa- using ILOAN ( since my asset no and asset sub number in this table is linked to equipment number  using ILOAN field)
    ILOA with ANLC- using ( company code, asset number and asset subnumber)
    though the field names are different for my asset number and subnumber in both the tables , they have same data element(component) -
    IS it fine to join two tables with fields having different field names but same component.
    asset number field name is  in ILOA-anlnr and ANLC-anln1 though component type is same - anln1 for both
    similarly asset subnumber has like  ILOA- anlun and ANLC- anln2 with same component type-anln2
    now in cmod for the function module i am writing select statement like this
    code in cmod for transaction data
    when mydatasource
    loop c_t_data into lv_ctdata3
    1.     SELECT SINGLE * FROM anlc WHERE bukrs EQ lv_data3-bukrs AND 
    2.                                     anln1 EQ LV_DATA3-anln1 AND 
    3.                                     anln2 EQ LV_DATA3-anln2 AND 
    4.                                     gjahr EQ Lv_data-gjahr AND 
    5.                                     afabe EQ  '01 ' . 
    6.     IF SY-SUBRC EQ  0 . 
    7.       CALL FUNCTION  'FI_AA_VALUES_CALCULATE' 
    8.         EXPORTING 
    9.           i_anlc = anlc 
    10.         IMPORTING 
    11.           e_anlcv = l_anlcv. 
    12.     ENDIF. 
    lv_data3-nbw =l_anlcv-nbw.
    modify c_t_dat from lv_data3
    end loop
    Edited by: krishnav3.5 on Jul 8, 2011 2:07 PM

    Hi ,
    IS it fine to join two tables with fields having different field names but same component.
    1.Yes we do this many times .We combine fields having different names but functionally they are the key values to match .
    No issue with that untill they are in same format and you want to match data based on those fields .
    HOW should i create a view on these four tables .
    2.For view you can create view on 2-3 tables with matching fields and for complex logic you can populate additional fields via CMOD code .
    Regards,
    Jaya

Maybe you are looking for