Fix for jittery jpeg images in FCE?

Hi,
I recently created a 25th wedding anniversary video for a friend of mine. Basically, I used jpeg images to which I applied motion (slow zooms, pans, etc). I noticed that when I rendered the movie, I got some jitters through some of the edit points. I rendered and re-rendered, but the jitters remained (they were in exactly the same place through the various conversions: eg. in the QuickTime movie and on the final DVD). Very frustrating. I normally edit on a preset canvas for HD, and don't have any problems. However, this time I selected 720x480 DV/DVCPRO - NTSC, since I didn't want to use the full size of 1920x1080 HD resolution ( mainly because I also incorporated some captured clips from VHS tapes).
Did I select the wrong preset for the canvas? Could this be why I'm getting the jittery edits? Or, perhaps it has something to do with timecode? I'm not very technical-minded; don't have a clue, in fact. Anyone have any experience with using jpegs in your movies and overcoming jitters? And, what preset for the canvas should I use for these kinds of projects?
Thanks very much!
Vic

Try using the De-interlace Filter on them.

Similar Messages

  • Fix for bordeless hyperlink image not working

         Hello, I am fairly new to the webdesign world, I have a page that I have an image that is a hyperlink (www.crespidrama.org) and I am trying to remove the border.  The fix that I found on the forums was to do a img { border:none;} but it doesn't appear to be working.  I assume I have the code in the wrong place?
    Here is the code for the image from that page:
      <a href="then-there-were-none.html"><a href="then-there-were-none.html"><img src="images/teaser-poster.jpg" a img { border:none;}width="109" height="140"></a><br>
    Many thanks for your help!

    I think you are probably in the wrong forum. The HTMLHelp forum is for people using the RoboHelp product to create Microsoft HTML Help, not for people need help with HTML.
    I will offer a suggestion as to what is wrong but if that is not it, you should ask in the forum for whatever product you are using, Dreamweaver maybe?
    I would start by writing the code something like this, based on the code you supplied.
    <a href="then-there-were-none.html"><img src="images/teaser-poster.jpg" border:none; width="109" height="140"></a><br>
    Of course, if the border is part of the image, then specifying border as none will have no effect.
    As you are just starting, a good place to visit would be http://www.w3schools.com
    See www.grainge.org for RoboHelp and Authoring tips

  • I see inconsistent ImageNew() failures for CMYK Jpeg Images  (CF10)

    Weird problem.
    I have a set of test cases that pass just fine loading a known CMYK jpeg via ImageNew().  Later, with no restart of the app server, these same test cases fail.  Again, after a while, the test case passes again.  I've dug into the Java a little bit, and I wonder if the ImageReader implementation being used doesn't switch out once in a while -- like maybe a hashtable of ImageReaders reorders or something.
    I know the CMYK is only partially supported, but I could get data with ImageNew and ImageInfo showing it was a CMYK file, then later on, it would throw "Image Not Supported" errors.
    Anybody have knowledge of these inner workings to provide some insight?  Smells a bit like a bug to me, but I can't consistently replicate it.
    -Dave

    From what I can tell, it does appear to be a bug.  I have submitted a bug report to Adobe on it.
    https://bugbase.adobe.com/index.cfm?event=bug&id=3596008
    What seems to be occurring is that coldfusion.image.ImageReader is trying to find the CLibJPEGImageReader class from the collection returned by javax.imageio.ImageIO.getImageReadersByFormatName("jpeg").  This works fine if it is the first object returned in the collection, but if not, it will return another JPEG ImageReader that does not support CMYK images.  I have two systems (both RedHat) which are currently in each state.  One has the CLibJPEGImageReader as the first element in the ImageReader collection, and in the other, it is the second element in the collection.  The code below will work fine when the correct reader is found, but not when it isn't the first element in the collection.

  • IBooks 1.5 showing images stretched in 2 page view, any fix for thi?

    Images were ok on iPad in previous version of iBooks. Now stretched in 2 page view but ok in 1 page.  Is there a fix for this?

    Images were ok on iPad in previous version of iBooks. Now stretched in 2 page view but ok in 1 page.  Is there a fix for this?

  • Methods to reduce the CPU Usage for painting the image

    Hi,
    I have developed an application to view images from an IP camera. By this I can simualtaneously view images from about 25 cameras. The problem is that the CPU Usage increases as the no of player increases. My Player is JPanel. which continuously paints the images from camera. The method 'paintImage' is called from another thread's run method. This thread is responsible for taking jpeg images from IP camera.
    Here is the code for this.
    public void paintImage(Image image, int fps) {
    try {
      int width = this.getWidth();
      addToBuffer(image);
      currentImage = image;
      Graphics graphics = this.getGraphics();
      if (isRunning && graphics != null) {
       graphics.drawImage(image, 0, 0, getWidth(), getHeight(), this);
       if(border ==true){
        graphics.setColor(Color.RED);
                          graphics.drawRect(0,0,getWidth()-1, getHeight()-1);
       graphics.setColor(Color.white);
       graphics.setFont(new Font("verdana", Font.ITALIC, 12));
       graphics.drawString("FPS : " + fps, width-60, 13);
       this.fps = fps;
       if (isRandomRecord) {
        graphics.setColor(new Color(0, 255, 0));
        graphics.fillArc((getWidth() - 10), 5, 10, 10, 0, 360);
    } catch (Exception e) {
      e.printStackTrace();
    Can someone please help me to solve this problem so that the CPU usage can be reduced.

    Can you give me more detail information about how to use
    an automated profiling tool You run it and excercise your app. Then it presents stats on number of times each method was called and time spent in each method, plus other stuff. Using those two stats you can zero in on the areas that are most likely to yield resullts.

  • When importing jpeg images I am getting 2 dupplicates need fix.

    When I import jpeg images from Sony a77 camera to my windows 7 computer I am getting 2 more dupplicates, the 2nd one has noise that looks like rectangles . Is there a fix for this? It is on elements 10.

    For Importing from Camera, I am guessing you are using 'From Card or card reader'. The media imported in this way is imported via Adobe Photodownloader. Can you please check if the option for 'Automatically fix red eyes' is unchecked? It would be good if you can paste the snapshot of the import dialog you are using. I am guessing some setting in import dialog is causing this issue.
    ~Surendra

  • PNG fix for background images?

    I am putting together an artsy-fartsy design with lots of
    stylish wavy lines, fine gradients and dropdown shadow effects and
    was wondering if there was a PNG fix for background images. Most
    out there seem only to apply to images included in the html.
    Otherwise I can use JPEGs with a bit of the background included
    behind them (I hate doing this)...

    Hi,
    Hmmm. I think you have a great point there. In my opinion, I
    think that there is no png fix for background images. Use jpegs
    with background. I do the same.
    Gaurav
    www.gauravchandra.com

  • Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    I use a  windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor..  I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run.  The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
    What does you system configuration?

  • How to get crisp jpeg images for slideshow on a Mac with Final Cut?

    Hi, I imported a large number of jpegs into Final Cut Pro and when I export to Quicktime Movie (not modifying the sequence size or settings I notice the quality of the jpeg images looks rather washed out and a bit fuzzy. The image dimensions of the jpegs are actually 2848 x 4272 and I was originally using a sequence setting of 720 by 480 (which scaled the images to about 12%). I experimented with doubling the sequence setting to 1440 by 960 and scaled the images to about 25.5% - still a bit washed out look.
    Basically this will be a presentation on a computer and output via projection. Looking for best possible and clearest photos. I experimented with iPhoto and when you play a slideshow it looks very crisp - this is what I am aiming for. When I export using the Slideshow export at the largest size 640 by 480 in iPhoto to quicktime - the quality seriously deteriorates.
    What would be the best way to maintain the crispness of the photos in Final Cut for an export to Quicktime that would be show on a Mac via a projector? Thank you

    Hi Nick, I do see information on creating a slideshow with Quicktime at: http://www.apple.com/quicktime/tutorials/slideshow.html
    however it appears Quicktime X removed that capability. There is no 'open image sequence' option from the File menu in Quicktime X.
    If I do end up sticking with Final Cut - would you recommend any codec and/or dimension size that would result in the best quality or the most crisp image? I also need a few fade in's and out's on various parts - I don't believe I would have the control without Final Cut.
    Would resizing the image files in Photoshop to 1920 pixels by 1280 before importing them into Final Cut result in crisper images? Thanks.

  • 4K TV not recognized correctly: MacBook Pro Mid2014 15" reports a Samsung UE40HU6900 4K TV as 8K (7680x4320). This results in an ugly, washed out image half the size it should be. Is there a fix for this? (OSX 10.10.1)

    MacBook Pro Mid2014 15" reports a Samsung UE40HU6900 4K TV as 8K (7680x4320).
    This results in an ugly, washed out image half the size it should be. If you turn off scaling everything is tiny as 8K are displayed on a 4K screen. To get the actual 4K resolution you have to turn on scaling. Still 8K is transferred to the device, but doubling the data lines makes the picture look washed out and create obscure effects for line borders.
    Did anybody encounter this problem before? Is there a fix for this? (OSX 10.10.1)

    You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
    MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Print the first page of the panic report and bring it with you.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • How can I add a title and ALT text to a JPEG image in Elements 11 for MAC?

    Does anyone know if there is an easy way I can add a title and ALT text to a JPEG image in Elements 11 for MAC?
    Very grateful for any help here.

    Hello
    The Arrange menu is your friend.
    You may select the arrow then "Bring to Front".
    Yvan KOENIG (from FRANCE vendredi 19 septembre 2008 17:49:50)

  • [svn:osmf:] 17499: Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available

    Revision: 17499
    Revision: 17499
    Author:   [email protected]
    Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
    Log Message:
    Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-990
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

    Revision: 17499
    Revision: 17499
    Author:   [email protected]
    Date:     2010-08-27 11:05:22 -0700 (Fri, 27 Aug 2010)
    Log Message:
    Partial fix for FM-990: prevent RTE when attempting smoothing for an image where a policy file was not available
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-990
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/elements/ImageElement.as

  • After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

    After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • How to create a white back ground for Jpeg image to upload on various webites

    Hello, I have Photoshop Elements 11. I designed a book cover with Microsoft Word 2010 and saved the file as a Pdf. I want to upload an image of this book cover to various web sites that require a Jpeg image and the book cover has to cover at least 85% of the image and require a pure white back ground. Pixel size can be 1,000 or more. Can somebody help me? I did go to the library to get reference books but, I can't ascertain from these books how to do this. I am a beginner to Photoshop and realize I will have to get training for future projects. Thank you very much for any information you provide to me. I wanted to upload an image from my computer to show you the book cover but there was a dialogue box that appeared saying the file was too large to upload. The book cover I designed is 8.5' x 11.0"

    Wow! I can't thank you enough! There is not enough space here for me to express my gratitude for helping me! You are a saint! I had the Pdf files uploaded and stored in my organizer, so the images of the book covers appeared in the bottom of Photoshop Elements 11 Editor. I did exactly as you instructed, then sent the Jpeg  to Amazon and it uploaded in less than 5 minutes. The image could be a little bigger, but now I can utilize the software enough to tweak it.Thanks so much!!!! Any other ideas would be greatly appreciated. Take care and have a great 2013!

  • Marydee-You asked me about resizing apps for jpeg images & how 2 get info

    Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
    Here's what I found in the iPhoto6 Help Menu:
    Showing a photo's image and camera information
    iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
    To show image and camera information:
    Select the photo and choose Photos > Get Info.
    You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
    Also please take a look at these prior discussions in iPhoto Forum/s:
    http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
    http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
    http://kstudio.net/re.html
    Hope the above helps and good luck on this.
    (3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc.   Mac OS X (10.4.8)  

    Marydee- You asked me about resizing apps for jpeg images. And you also asked how to get photo info for each image in iphoto
    Here's what I found in the iPhoto6 Help Menu:
    Showing a photo's image and camera information
    iPhoto stores EXIF information with each photo in your library. This information includes the photo's image size, the date and time it was taken, and the type of camera it was taken on, as well as important exposure information, such as the shutter speed, aperture, and film ISO.
    To show image and camera information:
    Select the photo and choose Photos > Get Info.
    You can also see a photo's title, date taken, rating, format, and comments by clicking the Information button in the bottom-left corner of the iPhoto window.
    Also please take a look at these prior discussions in iPhoto Forum/s:
    http://discussions.apple.com/thread.jspa?messageID=3212997&#3212997
    http://discussions.apple.com/thread.jspa?messageID=4535542&#4535542
    http://kstudio.net/re.html
    Hope the above helps and good luck on this.
    (3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc.   Mac OS X (10.4.8)  

Maybe you are looking for