Fixed value assignment while creating Domain

Hi All,
While creating a Domain with data type 'CHAR', No. characters 13, in Value Range > Fixed Value i had given 'TEST_MATERIAL' but it only takes first 10 Characters (TEST_MATER). I wan to display all characters.
how can I solve it.
Points Assured.
Regards,
Suresh

Hi here the problem is not your length.
The standarad SAP length for the value field is 10. So even if your domain has length more than 10 the value field cannot accomodate that length.
So no option ... you must go for Value Table.
Also the fixed ranges are mostly for numbers... tht's why they have fixed the max length as 10 which is large in case of numbers...
Better to go for Value Table. I have tried that and is working fine.

Similar Messages

Oracle Portal 11g installation hangs while creating domain

I have patched the oracle portal 11.1.1.2 to 11.1.1.6 in Window 7 and tried to configure the oracle portal but the installation hangs while creating domain.
Just realised Window 7 does not support Oracle Portal 11g.
Edited by: user12063924 on Jul 5, 2012 11:58 PM

Dear Oracle Oracle BI Software,
This software is a big puzle for end users and it is really wasting our time in try and error scenarios. admit it with us and don't hide behid curtains. Well did u follow the Guides in the Book ? Yes Yes i followed and it is still showing errors .. in the name of God inform the Development Department to manage the setup .. i configured everything fine and what is really funny that after it loads 100 % it discovers that it can't create domain. sorry i m not a master Guy, but before the installtion it should validate for us if everything is ok and can be lauched not to do 1 hour workshop and cover out at the end of the movie that there is an error.
Guy put this product in the shelf until next release
Thank You

Error While creating Domain offline in windows...

I am trying to create a domain in windows using my scripts which i use in unix. But i am getting the following error. Here i am using Ant /build.xml/ and domain.properties( in this i pass the details) Please help....
C:\scripts>setenv
C:\scripts>set WEBLOGIC_HOME=C:\bea\wlserver_10.3
C:\scripts>set BEA_HOME=C:\bea
C:\scripts>set WORK_DIR=C:\wldomains
C:\scripts>set DOMAIN_HOME=C:\wldomains
C:\scripts>call "C:\bea\wlserver_10.3\server\bin\setWLSEnv.cmd"
CLASSPATH=C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_
patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_p
atch.jar;C:\bea\JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.
jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.s
erver.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\m
odules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.ja
r;.;C:\Program Files\QuickTime\QTSystem\QTJava.zip
PATH=C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\d
efault\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bi
n;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\o
racle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\Syst
em32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Perforce;C:\Program
Files\QuickTime\QTSystem;c:\ant\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci9
20_8
Your environment has been set.
C:\scripts>ant clean
Buildfile: build.xml
identify-os:
init:
clean:
[delete] Deleting directory C:\scripts\build
BUILD SUCCESSFUL
Total time: 1 second
C:\scripts>ant setup-domain
Buildfile: build.xml
identify-os:
init:
[mkdir] Created dir: C:\scripts\build
init-domain-env:
setup-domain:
identify-os:
init:
init-domain-env:
config-domain:
identify-os:
init:
init-domain-env:
backup-domain:
identify-os:
init:
init-domain-env:
delete-domain:
[echo] Deleting domain 'C:\wldomains\pdc2' ...
[echo] Configuring WebLogic 10.3 domain (offline mode) ...
identify-os:
init:
run-wlst-script:
[echo] Running WLST script 'C:\scripts\wlst\offline\config-domain.py' ...
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading configuration properties ...
[java] [I] Reading the domain template ...
[java] [I] Configuring the domain ...
[java] [I] Configuring domain 'pdc2' ...
[java] [I] Creating log mbean for 'Domain' : 'pdc2' ...
[java] [I] Configuring the admin user ...
[java] [I] Configuring admin user 'system' ...
[java] [I] Configuring the admin server ...
[java] [I] Configuring admin server 'myserver' ...
[java] [I] Renaming server 'AdminServer' to 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Creating log mbean for 'Server' : 'myserver' ...
[java] [I] Creating SSL for server 'myserver' ...
[java] [I] Creating WebServer for server 'myserver' ...
[java] [I] Creating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring machines ...
[java] [I] Configuring clusters ...
[java] [I] Configuring servers ...
[java] [I] Configuring servers 'myserver' ...
[java] [I] Configuring server 'myserver' ...
[java] [I] Updating server 'myserver' ...
[java] [I] Updating log mbean for 'Server' : 'myserver' ...
[java] [I] Updating SSL for server 'myserver' ...
[java] Error: setListenPort() failed. Do dumpStack() to see details.
[java] [I] Updating WebServer for server 'myserver' ...
[java] [I] Updating WebServerLog mbean for 'WebServer' : 'myserver' ...
[java] [I] Configuring startup classes ...
[java] [I] Configuring shutdown classes ...
[java] [I] Configuring mail sessions ...
[java] [I] Setting domain options ...
[java] [I] Setting overwrite domain to 'true'
[java] [I] Setting create start menu to 'false'
[java] [I] Setting java home to 'C:/beajdk160_05'
[java] [I] Setting server start mode to 'dev'
[java] [I] Saving the domain configuration ...
[java] Error: writeDomain() failed. Do dumpStack() to see details.
[java] [I] Closing the domain template ...
[java] [I] Reading the domain configuration ...
[java] Error: readDomain() failed. Do dumpStack() to see details.
[java] [I] Configuring JDBC ...
[java] [I] Configuring JDBC system resources 'CPoolDS,EPoolDS,poswotDataSou
rce,MainTxDataSource,AdditionalTxDataSource,PDC1PoolDS,urgentMessageDataStore,Us
rFriendlyDescPoolDS' ...
[java] [I] Configuring JDBC system resource 'CPoolDS' ...
[java] Error: No domain or domain template has been read.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\scripts\wlst\offline\config-domain.py", line 149, in ?
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 35, in configJD
BCSystemResources
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 51, in configJD
BCSystemResource
[java] File "C:\scripts\Lib\script\offline\jdbc.py", line 97, in hasJDBCS
ystemResource
[java] File "C:\scripts\Lib\script\common\wlstutils.py", line 99, in chec
kPath
[java] TypeError: string member test needs char left operand
BUILD FAILED
C:\scripts\build.xml:20: The following error occurred while executing this line:
C:\scripts\build.xml:431: The following error occurred while executing this line
C:\scripts\build.xml:743: Java returned: 1
Total time: 10 seconds

Hai,
After doing snapshot my application was created and even in fdm also i found error while creating application(hint:cache not found) but now everything is fine don't know what exactly the error may be but now i am facing 404 error while doing Assign Access control in shared services console what may be the reason did anyone experienced this error if so please provide me the solution.
Edited by: 940022 on Jun 15, 2012 3:50 AM
Edited by: 940022 on Jun 15, 2012 3:51 AM

USE OF CONVERSION ROUTINES WHILE CREATING DOMAIN

Hi,
Could anyone tell me the use of conversion routines under output characteristics tab while creating a domain ??
Thanks & Regards,
Mounica J

Coversion Routines are used to convert field values into internal or external format.
Once you specify the Conversion routines at domain level,it ensures that data conversion into external and internal format is handled automatically .
Please close the post if the question is answered.
Thanks,
Faiz

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

Recon Accounts assignment while creating a new GL Account

Hey everybody,
I was wondering if there is any global rule to which accounts should be selected as Recon A/c while creating a GL master in fs00. From my point of understanding the only Recon A/c's are Accounts Receivable as recon account :Customer and Accounts Payable as recon account: Vendor! So in which situation do we select Recon account : Asset or Recon account: Contract Account Receivable?
If you could please help me figure this out, I would greatly appreciate.
Thanks in advance.
Nick
help.sap.com

General ledger is the main accounting record of a business which uses double-entry bookkeeping. In SAP, the central task of G/L accounting is to provide a comprehensive picture for external accounting and accounts. Reconciliation Accounts are G/L accounts that receive postings from a subsidiary ledgers. Meaning, transactions data are not posted directly to recon accounts. Example of recon accounts are Accounts Receivable, Accounts Payable and Fixed Assets G/L. For accounts receivable G/L the subsidiary ledger is the customer account. All transactions with the customers are posted directly to the customer account and the recon account is automatically updated. How this thing happen? Well, when you create a customer account you specify under the Company Code data the reconciliation account.
Regards
Sanil

Max condition value - exceeds while creating a SO

Hi All,
I have a requirement which we are trying to meet up by a solution:-
Requirement:-
A fund value (e.g. 1,00,000) is to be allocated on a particular spend which is offered to customers (e.g. discounts)
So as and when the discounts are offered on the customer orders (SO) the funds value should get depleted
this process goes on and the discounts are offered to the customers, but the total discounts offered till date has reached (98,000), hence when a new order where the discount offered is lets say (5000) it should not allow user to offer it, since it should not go beyond the total fund value i.e. (1,00,000)
Solution:-
Setup:-
A condition type for discount ZCDS is created with "condition update" flag marked
In the condition records of the above condition --> Additional sales data --> Max condition value we will put the total allowed fund of 1,00,000
Transactions:-
Mutliple SO's are created with ZCDS discounts condition types ((1) 30,000 2) 30,000 3) 30,000)
Now in the cumulative values of the ZCDS condition record shows 90,000 for the above 3 orders
Now a new SO is being created with ZCDS valuee of 30,000... IT SHOULD NOT ALLOW TO POPULATE THE ZCDS - CONDITION VALUE OF 30,000 IN THE SO, SINCE IT WILL EXCEED THE TOTAL FUND AMOUNT OF 1,00,000 WHICH IS ALREADY ASSIGNED IN THE "MAX CONDITION VALUE"
ISSUE:-
I am able to create a 4th SO with 30,000 in ZCDS condition type which is updating the "cumulative values" (1,20,000) in the ZCDS condition records as well
QUESTION:-
Can the above scenario met through the solution we have proposed ?
Will the max condition value of 100000 not restrict the condition value in the SO since it is exceeding it ?
Please suggest in case i may have to configure setup additional in it
Appreciate quick replies!
Jimit Shah

Hi
This maximum condition value i have tested some time back
But my results were quiet different
In your example for the 4 th order , when i tested system was taking only 10000 ( the balance of the max condition value)
If we create another order say 5 th order, then for that condition type ZCDS system was taking ZERO value
So it was limiting to the maximum of 100000
But it was allowing us to create N number of orders ( after max condition value was reached )
For those extra orders system was taking zero value for ZCDS ( which i think is meaning less)
When i find time i will test this once again and come back to you
I tested this once again today and found that once the maximum condition value is reached for the rest of orders system was taking the nett value as blank
This is the same with my earlier findings
In your example system will not take it to 120000 if the maximum condition value is set to 100000
If that is happening then there is problem somewhere
and in the condition item details analysis system very clearly tells that MAX value is reached for that condition
MAX condition value is working perfectly
Regards
Raja
Edited by: ramanathan raja on Feb 11, 2011 3:56 PM
Edited by: ramanathan raja on Feb 11, 2011 4:04 PM

Package assignment while creating AET feild

hi expert,
while creating AET feild ,on click of new feild ,it prompts for a window to select object part.
But here the package feild is balnk nad disbled.In dev system we have already created a package,but unable to assign it herer.
Can you please help.

found the answer u can seti t using trx ATXSYS...

Change LIPS-PRCTR with value ' 0020990000' while creating a Delivery Vl01n

Hi Gurus,
    I have a requirement to default the profit centre of the delivery while creating a delivery through Vl01n.
   Please let me know which enhancment / exit i should use and how.
Regards.
Avi...

Hi Vijay,
I need a help on this profit centre change.
1) Create a Sales order through Va01
2) Create a delivery for the sales order in Vl01n.
    Post good issue.
3) Create Vf01 for the delivery.
4) The profit centre change should be reflected in accounting document also.
In my case its not getting updated in the accounting document .
Can you please guide me where should I make changes.
Regards,
Avi...

Net value issue while creating return order with reference to billing

Dear All,
I created SO / DEL/ BILLING for qty 100 say net value-20000.When i created Return order with refrence to billing document,
net value appearing same ( 20000) for 50 quantity.Pl do advise asap as its required urgently.
Thanks in advance.
Regards
raj
Edited by: raj_sapsd on Aug 20, 2010 9:18 AM

surelly problem in VTAF
F2 to RE
DATAT: 103
DATAT: 103
DATAT: 003
Coping requirement 021
item level TAN and ietm cat proposal G2N
DataT: 153
Datat: 104
datat: 004
Coping requirement 303
Update doc Flow X
only possibilites Removed my Moderator
Edited by: Lakshmipathi on Aug 21, 2010 9:31 AM
Please avoid asking for points

Error while creating domain

i try to create the domain by the wlst , taking template of the previous domain , when i try to create , i got following error
com.bea.plateng.domain.script.jython.WLSTException: com.bea.plateng.domain.script.ScriptException: The applications directory you specified contains files. Applications may only be written to an empty directory. Applications Directory currently is /opt/weblogic/wl10.3.0/user_projects/applications/mydomainname
at com.bea.plateng.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.bea.plateng.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1464)
at com.bea.plateng.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)

You must clean /opt/weblogic/wl10.3.0/user_projects/applications/mydomainname directory.

Account assignment while creating reservation using bapi

Hi , I am creating reservation using BAPI (BAPI_RESERVATION_CREATE1), but when I seeing the open reservation account assignment field is blank, could any on ehelp me on this, i.e what parameter I am missing in BAPI for account assignment.
best regards
pankaj

Hi,
there is not field to assign the account assignment in Bapi..
you need to assignt he account manaually.
Assign account assignment category.
    SELECT * FROM eban INTO TABLE lt_eban WHERE banfn = w_banfn .
    IF sy-subrc = 0.
      LOOP AT lt_eban .
        lt_eban-knttp = 'J'.    "assign your own account categeory
        MODIFY eban FROM lt_eban.
        COMMIT WORK AND WAIT.
      ENDLOOP.
endif.
Regards,
Prabhudas

Message as Deliveries not assigned while creating shipment document

Dear Friends,
I have created delivery document with TC VL01n.Document is saved but PGI has not done.
Now I am creating shipment document with TC VT01n.I have selected delivery document from the drop down list.After entering Delivery document no I get a message saying total of deliveries not assigned.
What could be the reason ? and how to correct it?
Thanks in advance.
Regards,
Shrikant

Hi Srikanth,
There are certain settings for shipment to get carried on like transportation should be relevant for Route, Delivery Types & Delivery item Categories.... Kindly check whether all of these are relevant for Transporation and then carry out picking for your particular delivery and then try creating shipment document....
Regards
Harsh

Error while creating domain after OSB Installation OS:linux 64 bit

Hi,
OS is Linux 64 bit.. Oracle 11g.. Could you please suggest what I am missing in Installation of OSB or domain creation??
<------------------- Fusion Middleware Configuration Wizard ------------------>
Application Template Selection:
Available Templates
|_____Basic WebLogic Server Domain - 10.3.3.0 [wlserver_10.3]x
|_____Oracle BPM Suite - 11.1.1.0 [Oracle_SOA1] [2]
|_____Oracle SOA Suite - 11.1.1.0 [Oracle_SOA1] [3] x
|_____Oracle Service Bus OWSM Extension - 11.1.1.3 [Oracle_OSB1] [4]
|_____Oracle Enterprise Manager - 11.1.1.0 [oracle_common] [5]
|_____Oracle Service Bus Extension - Single Server Domain Topology - 11.1.1.3 [Oracle_OSB1] [6]
|_____Oracle Service Bus Extension - All Domain Topologies - 11.1.1.3 [Oracle_OSB1] [7]
|_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.3.0 [wlserver_10.3] [8]
|_____Oracle Business Activity Monitoring - 11.1.1.0 [Oracle_SOA1] [9]
|_____Oracle WSM Policy Manager - 11.1.1.0 [oracle_common] [10] x
|_____Oracle JRF WebServices Asynchronous services - 11.1.1.0 [oracle_common] [11]
|_____Oracle JRF - 11.1.1.0 [oracle_common] [12] x
|_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.3.0 [wlserver_10.3] [13]
** CFGFWK-64040: The template you selected can't be applied because the
** following dependencies have not been satisfied:
** Unresolved ORs:
** OR for Oracle Service Bus OWSM Extension:11.1.1.3
** [/opt/oracle/Middleware/Oracle_OSB1/common/templates/applications/wlsb
** _owsm.jar] <xml-fragment
** xmlns:fo="http://www.w3.org/1999/XSL/Format">
** <dom:requires name="Oracle Service Bus Extension - All Domain
** Topologies" version="11.1.1.3" colocated="true"
** xmlns:dom="http://xmlns.oracle.com/weblogic/domain-template"/>
** <dom:requires name="Oracle Service Bus Extension - Single
** Server Domain Topology" version="11.1.1.3" colocated="true"
** xmlns:dom="http://xmlns.oracle.com/weblogic/domain-template"/>
** </xml-fragment>
Thanks,
Sushma

Usually, when you choose for example Oracle Service Bus Extension - Single Server Domain Topology - 11.1.1.3 [Oracle_OSB1], the dependencies are automatically chosen as well.
If this not happening, just add the products it is suggesting in the error, such as Oracle Service Bus OWSM Extension - 11.1.1.3 [Oracle_OSB1] .

Error while creating user for a domain

i am developing a web-application which is hosted on tomcat server.
it is creating domains and users at another remote domain server.
localy it is working fine..
but when i test it online..
the problem is,
sometimes it works fine ,the domains are being creted at remote server..
but sometimes it delivers error that domain at remote server can not be created.
Is it due to fact that theat some errornous code in the buffer of application have older versions of applications causing the error ?
Code::
if(strPlanId.equalsIgnoreCase("3")) {
                //Create domain account for planid=3 plantype=Cp
                blnOK=false;
passwordGS comes from database
strUrl="http://sosync.net/sosync/admin?pwd="+passwordGS+"&action=user_createdomain&domain="+strSubDomain+".gosync.net&adminpassword=aspire3002&diskquota="+longdk;
                u=new URL(strUrl);
                uc=(HttpURLConnection)u.openConnection();
                code=uc.getResponseCode();
                if(code == 200) {
                    rUrl="/TransCompleteServlet";
                    blnOK=true;
                    uc.disconnect();
                } else {
                    rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
                if(blnOK) {
                    String strUrlUser="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_createuser&username="+strEmailId+"&password="+strPassword+"&domain="+strSubDomain+".gosync.net&communityname=Default&firstname="+user.getFirstName()+"&lastname="+user.getLastName();
                   URL u1=new URL(strUrlUser);
                HttpURLConnection   uc1=(HttpURLConnection)u1.openConnection();
                    code=uc1.getResponseCode();
                    response1=uc1.getResponseMessage();
                    if(code == 200) {
                        rUrl="/TransCompleteServlet";
                        String strUrlTZ="http://gosyncdesk.net/gosync/admin?pwd="+passwordGS+"&action=user_setuserpreference&username="+strEmailId+"&domain="+strSubDomain+".gosync.net&name=web_timezone&value='"+timeZone+"'";
                        u=new URL(strUrlTZ);
                        uc=(HttpURLConnection)u.openConnection();
                        code=uc.getResponseCode();
                          if(code != 200) {
                           rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
                    } else {
                        rUrl="/GSView.jsp?page=GSError.jsp?REQ=Unknown";
                        mailUtil.sendMail_admin("Error In Creating User for the Domain","While creating domain for "+user.getEmail()+" user could not be created due to following reason: <BR> "+response1+"<br>GoSync UserName:"+strEmailId+"<br>GoSync Password:"+strPassword+"<br>GoSync Domain :"+strSubDomain+".gosync.net and URl String was :"+strUrlUser+"");
            }

if the problem is caching try setting the useChasses to false
uc.setUseCaches(false);

Fixed value assignment while creating Domain

Similar Messages

Maybe you are looking for