FLA File Can't Be Opened

Hi
I use Macromedia Flash 8 Professional. I created a menu for
my website. The problem is that when I close the program and open
the file again to edit it or continue my work, I notice that some
of the Graphics and Movie Clips are replaced by some of the other
Graphics and Movie Clips. Well.. that's the smaller problem, the
bigger one is that for some reason the program started to refuse
opening the file. It shows the following message when I try to open
the file:
error
massage
Is this a bug in the program? or is it the FLA file? Can
anyone help me, please?
Regards

did you save a version of the older file? copy it to another
computer or hard drive? sometimes files just get corrupted and
there's nothing you can do about it...it doesn't happen very often,
there is often times no logical explanation for it and is certainly
not unique to flash, but there you have it. it sucks when it
happens...
i wouldn't know of a way to fix this file--maybe try and open
it on another computer?
good luck,
albee

Similar Messages

  • Problem related to PS CS6 ext. on Mac.  Nikon DSLR D610 raw file can not be opened

    Problem related to PS CS6 ext. on Mac. Installation is OK but I can't open picture from my Nikon D610 (Raw NEF format). I get a message "can not open this format ...". Checking Help menu to see if I miss an update the message I get is that I'm up-to-date but at the end Nikon D610 (format supported of course) files can not be opened . JPEG are OK but I work with raw files. Thanks

    What OS are you running: 10.x.x?
    What version of the Camera Raw plug-in do you have?  Do (About) Plug-ins / Camera Raw to find out.
    You need at least ACR 8.3 to open D610 files.  If the Help / Updates process does not work, then there is a manual install process you can do.  The page with the download is for when people accidentally updated to ACR 8.4 and need to roll back to ACR 8.3 due to their OS being incompatible, but the installer on that page works even if you haven’t erroneously updated to ACR 8.4:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

  • The file can not be opened because of an error in the header

    I made a recording with Adobe Audition CC and saved this as a wav file. So far I could go open the file with Adobe Premiere Pro CC. But now always the following error message is poping up:
    The file can not be opened because of an error in the header

    Please dont double post:
    Die Datei kann wegen eines Fehlers in der Kopfzeile nicht geöffnet werden

  • Photoshop installation " Windows security, these files can't be opened" ?

    Every time I try to download Photoshop a message appears saying " Windows Security, these files can't be opened, you internet security settings preventing one or more files from being opened" I've tried everything from disabling specific security settings to allowing the download to pass through the internet security fire wall. Any help would be appreciated.

    Tdc01089 what version of Photoshop are you trying to install?  If it is Photoshop CC 2014 or Photoshop CC then please use the Creative Cloud Desktop application.  You can find more details at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

  • This file can't be opened.

    I have got a file I have worked on for ages that was on iCLoud and it for corrupted and started saying "This file can't be opened."
    So I went back to an earlier version and did the work again saving it on my mac.
    Now it is saying again:
    "This file can't be opened."
    1) Is there any way of salvaging this file?
    2) Given the way apple have made it harder to save incrementally as you work what is making my files corrupted?
    3) The file was a multi sheet spreadsheet. Am I being unrealistic thinking Numbers can handle this?
    Best Tommy Banana

    I suggest backing up the file using Time Machine.
    You can also use the menu item "File > Revert To " to see all versions

  • This file can't be opened because it has been deleted

    When I tried to save an Appleworks 6 document by clicking SAVE (drop down menu) and then inputting a file name and then clicking SAVE I get the following message.
    "This file can't be opened because it has been deleted."
    This problem started yesterday. I also had this problem this morning - but -
    I have just tried to replicate the problem and I can't
    However, has anybody had this problem before? If you did you solve it, or did it just not happen again?

    Although I've only gotten this message when I've had AppleWorks 6 open in both Classic & OS X at the same time, others get it like you with no specific cause. It usually is fixed by using Disk Utility to repair permissions and deleting the AppleWorks 6 preferences. See my user tip, AppleWorks has stopped working correctly, for more on the preferences.

  • Cannot change date and time settings, popup "These files can't be opened: Your internet security settings prevented..."

    When I try to change my date and time settings I get a Windows Security popup that reads: "These files can't be opened.  Your Internet security settings prevented one or more files from being opened. C:\Windows\system32\rundll32.exe"
    I have Windows 7 64 bit.  I also have McAfee SecurityCenter installed.  I have tried turning off my firewall temporarily, but the problem persists.  I am not sure if it is some type of virus.  If anyone could give me some information
    as to what could be causing this I would appreciate it.  Thanks in advance.

    Hi,
    Perhaps, this issue is caused by a sign of corruption.
    Please try to use sfc/scannow to check the System Files.
    Also, You may refer to the following link.
    http://www.sevenforums.com/general-discussion/71526-cant-change-date-time-2.html 
    Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Error message: File can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.

    I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
    “-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
    Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?

    I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
    Hope this will help other people who encounter similar problems in the future!

  • Is there a feature in Adobe Acrobat that allows me to create a PDF that has a 'self destruct' capability?  We have a situation where we need to allow people to download PDF files, but after a set time (48 hours), the file can't be opened and read (e.g., s

    Can Acrobat create PDF files that once downloaded - can't be opened after some preset time (48 hours)?

    Hi Edward lkeda,
    I am not very sure of that however as per my knowledge , you can use Adobe send service and provide public link to your users and then after 48 hrs you can delete the file from server and make File-link inaccessible.
    Hope that helps,
    Please revert back for any further query. I will try my best to help you with your problem.
    Regards,
    Rahul Tyagi

  • Question mark on the frame of my photos in the film strip and files can't be opened

    I had used LR for imports and some editing. I then reorganized my folders of the original files. This includes the NEF and JPG.
    Now when I open LR, all of the files are there but I get a message that they can't be opened and there is a small question mark on the gray around each photo.
    What do I need to to do to undo this?
    Thanks,
    Paul

    Did you "reorganize" them outside of LR? If so, LR has lost track of the images. You'll need to click the Question Mark on one at the highest level directory you can and point LR to the file. LR will try to re-locate the rest but you may need to do this for each changed branch.

  • Large pdf files can't be opened in adobe reader on wp8

    i am using adobe reader on wp8, but it can't open pdf file if the pdf file is large (i am sure a pdf larger than 80M can't be opened), it says "the path is invaild". it works well with small pdf files.
    any reply will be appreciated~

    WP8 = Windows Phone? If so, you'll want to go to the Digital Editions forum.

  • Canon 60D files can't be opened in Bridge (CS4 version); Camera Raw 6.6 has key features missing

    I am a Mac user (latest OS) and had been using Camera Raw from Bridge CS4 (part of my Elements 8 bundle) to edit my raw pictures from Canon RebelXTi. I upgraded to a 60D, downloaded the pertinent Camera Raw plug-in, but my raw files still wouldn't open in Bridge. I purchased Elements 10, thinking that would solve all problems, but apparently Bridge and Camera Raw are no longer part of the package! I downloaded the latest Camera Raw patch for Elements 10 (6.6), and I can now open raw files from Photoshop, but the Camera Raw version is not full featured and Bridge still can't open my 60D files. How can I get the full version of Camera Raw back AND have my 60D files opened? I deleted Elements 8, but not Bridge, and I can still open raw files from my Rebel in the earlier full version of Camera Raw. When I check in Elements 10 preferences, only Camera Raw 6.6 shows up, so that should be correct. Any ideas?

    The full-featured ACR with Elements loophole has been closed in the newer Mac Elements, I believe.   Us PC folks never had Bridge with Elements or haven’t for many versions, already , so have already been limited in RAW processing with Elements.  Adobe finally “fixed” the Mac version, too, I think.
    For full-featured ACR and Bridge you’re supposed to pay for Photoshop.  Perhaps Lightroom, that is half the cost of PS, and has all the adjustments of full-ACR and you could still link PSE as a final editor step of ACR-type adjustments aren’t enough.
    An alternative is to convert your CR2 files to DNGs and then they’ll open in older versions of ACR, like the one that came with PSE 8, assuming you can still install that.

  • Pages file can't be opened

    Hi, I was working on a pages file, then a message appeared, once i selected the "Revert" option, the file has been closed and i can't re-open it again.
    the message is: " the file name.pages" can't be opened. i upgraded all versions and deleted the old ones but nothing happened. I also tried to use different online website to convert the file to any other format but all trials failed. Please help!
    BR
    Ahmed

    Matthew
    I do not know if you have come across warnings against using Pages 5 for any valuable work.
    I have posted them almost incessantly, but you are only one of a series of users with unopenable files.
    There are obvious warning signs against the new file format. It is incredibly complex and undocumented, proprietary and constantly shifting. Pages 5 damages older files and has a very restricted feature set that is not constant.
    The only thing that opens Pages 5.1 files (and then not always) is Pages 5.1 running on very restricted hardware and very restricted software/OS.
    It is handled across multiple conversions if it passes through iCloud and iOS devices, perhaps even iWork for iCloud beta. Despite what Apple says these are not the same.
    If something goes wrong in the compressed bundle, that is the Pages 5 file format, then there is no known way of parsing the contents. All you can do is right click on the file to open the package and open Document.iwa which will reveal the occassional snippet of text amidst a lot of hexadecimal code.
    Pages 5 is beta in all but name.
    DO NOT USE PAGES 5 FOR VITAL WORK.
    In fact avoid it at all costs.
    Peter

  • Large pdf files can't be opened in adobe reader in wp8

    i am using adobe reader in wp8, but it can't open pdf file if the pdf file is large (i am sure a pdf larger than 80M can't be opened), it says "the path is invaild". it works well with small pdf files.

    WP8 = Windows Phone? If so, you'll want to go to the Digital Editions forum.

  • How "old" of a file can Logic 8 open?

    ok, this is going to sound funny but... I've got this friend (seriously) that just got Logic Studio. They are trying to open a Logic file that we did together back on ver. 4.7 and I'm being told that Logic won't open the file. They're getting an error message saying something about opening a 7.3 file instead (sorry I couldn't get the full error message from them).
    Does anyone know of a "cut off" in regards to how far back L8 can go when opening older Logic songs?
    Thanks much!

    Thanks for the info. I tried to open an older file as well to see if I had the same problem my freind was... So it would seem that Logic 5 is the cut off. Logic Pro 8 cannot open files created any earlier than that! I just tried to open a backup file from 2002 and I get a message saying that "this format is not compatablewith this Logic Pro version. Please load first into Logic Pro version 7.2.1 or earlier to convert this project". That only be mildly annoying if I.. oh, had a verion of 7.2.1 available. Do I need to uninstall 8, try to find a version of 7.2.1, go through all my old files, ere save them, uninstall, reinstall... I believe the word is.. OYE!!!!
    Now THAT... is not good news. I've got tons of archival files from around that era and never deramed I'd not be able to open them a mere 5 years later. I'm sure there's a work around for this and obviously, my fiend and I aren't the only ones that are going to run into this.
    Thanks again for the feedback and help!

Maybe you are looking for