Flash CC Air iOS: Problems with loading text from an external xml located on a server.

So I have this code allowing me to load text from an xml located on a server. Everything works fine on the Air for Android. The app even works in the ios emulator, but once I export my app to my ios device with ios 7, I don't see any text. The app is developed with Air sdk 3.9. What could be the reason? Do I need any special permissions like on Android? Does ios even allow to load xml from an external server?
Any clues?

It was my bad. I linked to a php file to avoid any connection lags, which was absolutely fine on the android, but didn't seem to work on the ios 7. So all I did is change the php extension to xml and it worked without any problems.

Similar Messages

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

Problems with displaying text from gtk+-2.0 with Cairo

I've got a 64-bit app that uses gtk+-2.0 (2.8.17 with Cairo). I had to build my own libraries since the gtk+-2.0 libraries Solaris 10 ships with is 32-bit only (and does not contain Cairo support). The app is statically linked so that our customers don't have to do any more than just install the app.
I've got a customer who's using a Sun Ray 2fs to run our app from a Sun Ray server. The problem is that none of the text in the UI is readable (including the menubar). He sent a screenshot and I can tell it's rendering the glyphs, just not correctly. The best way of describing the text rendering problem is to take a bitmap of antialised text drawn with a black pen color. Now remove all non solid black pixels. You only see pieces of the glyphs (typically, just the vertical and horizontal parts).
We don't have a Sun Ray client to test with but for testing purposes, I installed our app on freshly built Solaris 10 (5/09) and Open Solaris systems with no modifications to the virgin systems. I could run our app on both Solaris systems and display the app on a remote X display just fine. I asked the customer to try a real X display and he ran X-Win32 on a Windows XP guest using VirtualBox on the Sun Ray server and our app appeared just fine on his Sun Ray client. I told him if our app displays just fine on a real X display, then the problem must be with the Sun Ray server.
Has anyone encountered this problem? I'm going to try building the latest gtk+-2.0 libraries but I'm not convinced it's going to do any good. I don't think it's a Fontconfig configuration problem because our app worked out of the box on freshly installed systems (unless perhaps Sun has made changes to /etc/fonts/fonts.conf since the version on his system versus ours).
PS. We actually need the Cairo graphics support. It just happens that the version of Pango that's in 2.8 (and all versions of gtk+-2.0 since) also uses it for text rendering in the widgets.

Garrett Cobarr wrote:
> I have been attempting to import text from Illustrator
CS2 into Flash 8. I
> would like to retain the layers if possible.
>
> I am having many different problems as I have
experiemented at the AI side.
> One is having the text come in with the outline offset
and no longer alligned.
> When I drag and drop, the outline completly dissappers.
The text when it does
> come in is converted to a png and longer has the layers
seperated.
>
> I am also getting a message in the report window, on
some of my tries, that it
> is an improper PDF.
>
> The bottom line question is: What is the recommended
method of importing text
> from AI CS 2?
You have to remember that both programs are totally different
animals and simply
some of the option used by you in AI won't be working or
can't be translated into
flash's environment. You will never get editable content,
just an image.
Export to SWF from AI and import that SWF to flash. Should be
as close as possible
to original file tho I can't assure your layers will
maintain.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Problem with reading text from .DOC files through java and POI

I have used a jar file "poi-scratchpad-3.2-FINAL-20081019.jar" and "poi-3.2-FINAL.jar" to read text from a .DOC file. I used the "getParagraphText()" function of the class "org.apache.poi.hwpf.extractor.WordExtractor" to get the text.
I am able to get the text in the .DOC file but along with that i am getting the following messages/warnings
Current policy properties
*     thread.thread_num_limited: true*
*     file.write.state: disabled*
*     net.connect_ex_dom_list:*
*     mmc.sess_cab_act.block_unsigned: false*
*     mmc.sess_cab_act.action: validate*
*     mmc.sess_pe_act.block_blacklisted: false*
*     mmc.sess_pe_act.block_invalid: true*
*     jscan.sess_applet_act.stub_out_blocked_applet: true*
*     file.destructive.in_list:*
*     jscan.sess_applet_act.block_all: false*
*     file.write.in_list:*
*     file.nondestructive.in_list:*
*     window.num_limited: true*
*     file.read.state: disabled*
*     jscan.session.origin_uri: http://mirrors.ibiblio.org/pub/mirrors/maven2/org/apache/poi/poi/3.2-FINAL/poi-3.2-FINAL.jar*
*     file.nondestructive.state: disabled*
*     jscan.session.user_ipaddr: 10.136.64.153*
*     net.connect_other: false*
*     thread.thread_num_max: 8*
*     file.destructive.ex_list:*
*     file.nondestructive.ex_list:*
*     file.write.ex_list:*
*     jscan.sess_applet_act.sig_invalid: block*
*     file.read.in_list:*
*     mmc.sess_cab_act.block_invalid: true*
*     jscan.session.policyname: TU1DIERlZmF1bHQgUG9saWN5*
*     mmc.sess_pe_act.action: validate*
*     thread.threadgroup_create: false*
*     net.connect_in_dom_list:*
*     net.bind_enable: false*
*     jscan.sess_applet_act.sig_trusted: pass*
*     jscan.session.user_name: 10.166.64.201*
*     jscan.session.user_hostname:*
*     file.read.ex_list:*
*     jscan.sess_applet_act.sig_blacklisted: block*
*     jscan.session.daemon_protocol: http*
*     net.connect_src: true*
*     jscan.sess_applet_act.unsigned: instrument*
*     mmc.sess_pe_act.block_unsigned: false*
*     file.destructive.state: disabled*
*     mmc.sess_cab_act.block_blacklisted: true*
*     window.num_max: 5*
Below the above messages/warnings the data is getting printed. Only the text part of the data is retrieved not the fonts, styles and bullets etc.
Can anyone explain me why I am getting above warnings and how can I remove them. Is it possible to fetch the text depending on delimiters.
Thanks in advance,
Tiijnar
Edited by: tiijnar on May 21, 2009 2:45 AM

The jar files which were used are downloaded from http://jarfinder.com. Those jars created the problem of displaying those messages on console. I downloaded APIs from apache.org and used them in my application. Now my application is running good.
Tiijnar

Problem with loading data from file in ../demo/file/test

hi there,
I am using ODI to load text files located on a UNIX server where ODI is installed.
I am using the FILE_GENERIC data server and physical schema that came with ODI and I can reverse and load the demo files located in ../demo/file
I created a sub-directory 'test' under ../demo/file and placed a file there.
When I try to reverse this file (in directory ../demo/file/test) I get the error 'The directory ../demo/file/test specified in your schema does not exist'
I am sure the userid has equal rights to both directories ../demo/file and ../demo/file/test
What could I be missing?

In the topology manager
1. in the logical architecture : If it doesn't already exists (it should exist if your can use it on your local PC), you import the file technology
2. In the physical architecture, you create your data server for files .In your case, it shoud already exist for same reason as above. Is has a blue icon under the file technology
2. Select the Data Server, right click and select Insert Physical Schema . The Physical Schema window appears. On Definition tab, enter a name and then the path of your directory in the data schema field. No need to enyter a work schema for files.
4. Go to the Context tab, Select a Context and an existing Logical Schema for this new Physical Schema.
Select an existing Context in the left column, the type the name of a Logical Schema in the right column. This Logical Schema is automatically created and associated to this physical schema in this context.
It should work but i have never experienced it on a Linux system...

Weird problem with loading data from an XML using a for loop

Hi,
I have a strange problem. I have encountered this thing many a times but still don't know the proper workaround for it.
I am trying to load swf file, a video file or an image. They can be present on a local system or on a remote server also. All the entries corresponding to the files to be loaded is made in an XML file. I traverse through the nodes of the XML using a for loop. On the complete event of loader info, example:.
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
I fill a container with the loaded data.
My problem is when I am using for loop it doesn't works properly but if i use a statement like this:
someFunc()
     if(i<arr.length())
     ... do something...
     loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
private function onComplete(e:Event):void
... do something...
i++;
All files are loaded properly.
I think this can be because the for loop processes pretty fast but the content takes time to load, which ultimately leads to some wierd results.
Please let me know how can this thing be done correctly by using a for loop also.

You don't want to use a for loop to load several items. The way you almost appear to have it is the proper approach... load a file and use the completion of its loading to trigger loading the next file.

Problems with load DSO from file

I am working with BI 7.0.
I am loading data from file to DSO and my problem is that data is not active in my DSO, the data are loaded how New Data and I haven´t the data in query and DSO.
The settings of my dso are:
Type: standard
SIDs Generation upon Activation: X
Set Quality Status to 'OK' Automatically: X
Activate Data Automatically: X
I have created one transformation from datasource to DSO and one DTP that extract from datasource ( No PSA).
When I execute the DTP there aren´t errors, the status is green and ok but the data is not active.
If I try activate the data manually the job is launched but the data no active.
Thanks.

hai
Isabel Bautista
u r saying the data is not active in dso and also u r loading the data from file directly( no psa).
i think u know in B.I the data should be in psa then only u can load the data using DTP .so how can u load the data with out data in psa .i thinks may be because of this u r data is not activating in dso
if it helps
assign some points ok

Problems with loading Classes from a Directory of a jar file.

Hi Guys,
i have a problem with my programm. It works greatly in my eclipse platform. but there are all classes in my default folder. I want to add a plugin function now. My Abstract classes are in in my default folder and my doughter classes are in my plugin-folder called plugin.
I look what is in the pluginfolder -> all my doughter classes. but i every time get a Class Cast Exception and an ClassNotFoundException.
How can i do that ? Current i do it with Class.forName(frames.substring(0,frames[i].indexOf(".class")));
best regards flo

http://java.sun.com/j2se/1.3/docs/tooldocs/win32/classpath.html

Problem with gettin text from a new window

Hi
I have been trying to for sometime to work out why i cant get this to work...I open a main window which opens a new window when a button is pressed. This window has a text field where data can be typed, it has a button called "Send" which then allows the data to be send. However, when "Send" is pressed, a NullPointerException is throwen in the ActionListener because it is unable to get the text from the text field.
Anyone got any idea why, have done a small mock up just to give an example :
import java.util.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
public class TwoWindows implements ActionListener{
     private JTextField chatLine;
     public volatile boolean start = false;
     //******************************GUI Production******************************
     public TwoWindows() {
          JFrame frame = new JFrame("Multicast Discovery");
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          JPanel connectpanel = new JPanel();
          JButton button3 = new JButton("Open New Window");
          button3.setActionCommand("connect");
          button3.addActionListener(this);
          connectpanel.add(button3);
          frame.getContentPane().add(connectpanel, BorderLayout.PAGE_END);
          frame.pack();
          frame.setLocationRelativeTo(null);
          frame.setVisible(true);
     //*****************************action listener******************************
     public void actionPerformed(ActionEvent ae)
          //get what button was pressed
          String button = ae.getActionCommand();
          if (button.equals("search"))
               System.out.println("\n Do Something!");
          else if (button.equals("cancel"))
               System.out.println("\n Do Something else!");
          //start new window here
          else if (button.equals("connect"))
               setupChat();
          if (button.equals("send"))
                if (start)
                          //try to get the data from the new window
                          String s = chatLine.getText();
                          System.out.println("This has been inputted : " + s);
     //*****************************setup new window*****************************
     public void setupChat()
          JFrame frame01 = new JFrame("TCP Chat Window");
          frame01.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          // Set up the chat pane
             JPanel chatPane = new JPanel(new BorderLayout());
            JTextArea chatText = new JTextArea(10, 20);
        chatText.setLineWrap(true);
        chatText.setEditable(false);
        chatText.setForeground(Color.blue);
        JScrollPane chatTextPane = new JScrollPane(chatText,
        JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
        JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
        JTextField chatLine = new JTextField("Type Here!");
        JButton button4 = new JButton("Send");
          button4.setActionCommand("send");
          button4.addActionListener(this);
          chatPane.add(chatLine, BorderLayout.CENTER);
          chatPane.add(button4, BorderLayout.SOUTH);
         chatPane.add(chatTextPane, BorderLayout.NORTH);
          chatPane.setPreferredSize(new Dimension(200, 215));
          frame01.getContentPane().add(chatPane);
          frame01.pack();
          frame01.setLocationRelativeTo(null);
          frame01.setVisible(true);
          start = true;
     public static void main(String[] args)
     new TwoWindows();
}

public class TwoWindows implements ActionListener{
     private JTextField chatLine;
     public volatile boolean start = false;
     public void setupChat()
JTextField chatLine = new JTextField("Type
ld("Type Here!");
You have two variables called chatLine. One is a class field the other is a local object in setupChat.
Change
JTextField chatLine = new ...
to
chatLine = new ...

Problem with imported text from quark

Hi everyone
I have imported files from quark version 4 off a mac to Indesign cs4 on a windows PC. everything is fine apart from the text being a little messed up so i am happy enough with that. The problem is that when i drag and drop or copy and paste into a new document all the images will move over but new text will not work with the images.
By this i mean that when i try to type something over or near the graphics the graphics just vanish! you can drag them over the image and they vanish, then when you drag them away again them reappear!
Also the shapes that i move over have a thin white border on them where as the shapes that i create directly do not have this boarder.
Any help that you cold give me on this would be great!
Thanks in advance!!
Sam

Thats it thank you!
There was a text wrap applied to all the graphics. its working perfectly now!!
Thank you again!!!
Sam

How can I solve the problem with copying text from Google Documents?

Ctrl+C and Ctrl+X are not always working in Google Document opened with Mozilla Firefox 30. This problem first occurred 2 days ago. No changes to the software were made.
The problem is not stable and permanent. I can successfully copy several lines from document and paste them somewhere else. And suddenly the next one is not copied using ctrl+c. Even ctrl+x is not working until I change the selection of the lines. Sometimes it begin to work after changing the selection, sometimes not.
I'm using Google Documents for a long time. I always use Firefox to work with them. And I've never had this problem before.

This problem happens for me as well. I can copy/paste from Firefox initially, but then after pasting elsewhere the Firefox page has to be refreshed in order to copy something else....

Problem with loading Images from Google

if i click on one of this pictures & chose open in new tab https://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=23a96ac6-b84d-4e5a-be5f-ee9132199fac new windows starts loading, but the loading never ends, in past it use to open this page full screen if i chose open in next tab https://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=bab88957-319a-4363-94c3-3249dffdb36a, & firefox starts to consume a lot of Disk usage when its loading endlessly https://fud.community.services.support.microsoft.com/Fud/FileDownloadHandler.ashx?fid=0da2dd58-2534-4f61-80e7-c5810795a79d, whats up with fox? tried that thing with IE to, no endless loading, but kind of like plank page, background same color like u see on the link (dark), but no picture full page dark, & IE has no adds, did google change how this works?, but they are just not finished removing the stuff & that left plank page & fox is unable to load this blank page?, so i guess its not much issue with images, but didn't know how to name the topic
all my adds, for extra information
Adblock Edge
Enforce Encryption
Ghostery
More In Content UI +

Test in a similar manner to my suggestion in your memory leaks question [/questions/1048975]
You are using plugins that are designed to block things and that is probably what is occurring, especially with multiple such plugins.
See also
* [[Use the Profile Manager to create and remove Firefox profiles]]
* [[Firefox uses too much memory (RAM) - How to fix]]
*[[Disable or remove Add-ons]]
Additionally also see
*[[Websites show a spinning wheel and never finish loading]]
*[[Firefox can't load websites but other browsers can]]
Must admit I have not got a clue what ms fud.community.services. is

E71 problem with recieving text from international...

I have purchased a nokia e71 10 days back.everytime someone tries to send me a message from india or any other country i dont recieve it.any body any ideas how to fix it?

The jar files which were used are downloaded from http://jarfinder.com. Those jars created the problem of displaying those messages on console. I downloaded APIs from apache.org and used them in my application. Now my application is running good.
Tiijnar

Indesign CS3-JS - Problem in reading text from a text file

Can anyone help me...
I have an problem with reading text from an txt file. By "readln" methot I can read only the first line of the text, is there any method to read the consecutive lines from the text file.
Currently I am using Indesign CS3 with Java Script (for PC).
My Java Script is as follows........
var myNewLinksFile = myFindFile("/Links/NewLinks.txt")
var myNewLinks = File(myNewLinksFile);
var a = myNewLinks.open("r", undefined, undefined);
myLine = myNewLinks.readln();
alert(myLine);
function myFindFile(myFilePath){
var myScriptFile = myGetScriptPath();
var myScriptFile = File(myScriptFile);
var myScriptFolder = myScriptFile.path;
myFilePath = myScriptFolder + myFilePath;
if(File(myFilePath).exists == false){
//Display a dialog.
myFilePath = File.openDialog("Choose the file containing your find/change list");
return myFilePath;
function myGetScriptPath(){
try{
myFile = app.activeScript;
catch(myError){
myFile = myError.fileName;
return myFile;
Thanks,
Bharath Raja G

Hi Bharath Raja G,
If you want to use readln, you'll have to iterate. I don't see a for loop in your example, so you're not iterating. To see how it works, take a closer look at FindChangeByList.jsx--you'll see that that script iterates to read the text file line by line (until it reaches the end of the file).
Thanks,
Ole

Flash CC Air iOS: Problems with loading text from an external xml located on a server.

Similar Messages

Maybe you are looking for